Caracterización de moléculas de rizobacterias y de leguminosas con alto impacto productivo y tecnológico en la provincia de Córdoba

La provincia de Córdoba cuenta con alto desarrollo agrícola a base de cereales y leguminosas, como por ejemplo el maní. Pero este cultivo con los años ha trasladado su zona de siembra original y se ha extendido hacia otras áreas de mayor riesgo ambiental a raíz de la implantación de la soja. Diversas son las consecuencias de estas dos acciones y que se extienden desde lo agroecológico hasta lo científico-técnico. Este previo estado del arte y las referencias bibliográficas que apuntan a la necesitad de aumentar el valor agregado de los cultivos, nos ha llevado a formular una hipótesis de trabajo y es que las plantas de maní y soja así como las rizobacterias que se asocian con ellas, son productoras de diversas moléculas con potencial uso biológico en la productividad del cultivo y en aplicaciones tecnológicas, biológicas e industriales. Sumado a lo anterior y a las ideas gubernamentales de la necesidad de obtener conocimiento y capitalizarlo como riqueza, y la imperiosa urgencia de responder a demandas regionales, se presenta este proyecto cuyo objetivo general apunta a estudiar la producción de diversas moléculas de rizobacterias y leguminosas con el fin de mejorar la productividad de los cultivos y desarrollar nuevas aplicaciones tecnológicas en la provincia de Córdoba. Para cumplir dentro de los dos años de trabajo solicitados con lo expuesto anteriormente, la investigación será dividida en objetivos específicos y que consisten en investigar la producción de moléculas de raíces de maní y soja, analizar la respuesta microbiana a las rizodeposiciones de ambas leguminosas y evaluar el posible papel biológico y aplicación tecnológica de moléculas de ambos tipos de organismos. Nuestro grupo es de caracter multidisciplinar y ahondará en la diversidad molecular producida por raíces de maní y soja en direfentes días y la respuesta de las rizobacterias que se asocian ellas utilizando técnicas químicas (HPLC, GC, GC-masa) y herramientas microbiológicas y bioquímicas clásicas. Con fines de aplicación tecnológica se determinará la posible acción antioxidante de los extractos vegetales sobre sistemas modelos de ensayo así como la búsqueda de enzimas y hormonas microbianas aplicables en otros campos de la ciencia. De esta forma se pretende atender algunas demandas de diferentes sectores del centro sur de Córdoba y del país pero fundamentalmente posibilitar nuevas aplicaciones de las leguminosas y de las rizobacterias además de permitir la formación académicas de alumnos de grado y posgrado de la UNRC.

Overexpressed Ca-v beta 3 inhibits N-type (Ca(v)2.2) calcium channel currents through a hyperpolarizing shift of "ultra-slow" and "closed-state" inactivation

It has been shown that P auxiliary subunits increase current amplitude in voltage-dependent calcium channels. In this study, however, we found a hovel inhibitory effect of beta3 Subunit on macroscopic Ba2+ currents through recombinant N- and R-type calcium channels expressed in Xenopus oocytes. Overexpressed beta3 (12.5 ng/ cell cRNA) significantly suppressed N- and R-type, but not L-type, calcium channel currents at physiological holding potentials (HPs) of -60 and -80 mV At a HP of -80 mV, coinjection of various concentrations (0-12.5 ng) of the beta3 with Ca,.2.2alpha(1) and alpha(2)delta enhanced the maximum conductance of expressed channels at lower beta3 concentrations but at higher concentrations (>2.5 ng/cell) caused a marked inhibition. The beta3-induced Current suppression was reversed at a HP of - 120 mV, suggesting that the inhibition was voltage dependent. A high concentration of Ba-2divided by (40 mM) as a charge carrier also largely diminished the effect of P3 at -80 mV Therefore, experimental conditions (HP, divalent cation concentration, and P3 subunit concentration) approaching normal physiological conditions were critical to elucidate the full extent of this novel P3 effect. Steady-state inactivation curves revealed that N-type channels exhibited closed-state inactivation without P3, and that P3 caused an similar to40 mV negative shift of the inactivation, producing a second component with an inactivation midpoint of approximately -85 mV The inactivation of N-type channels in the presence of a high concentration (12.5 ng/cell) of P3 developed slowly and the time-dependent inactivation curve was best fit by the sum of two exponential functions with time constants of 14 s and 8.8 min at -80 mV Similar ultra-slow inactivation was observed for N-type channels Without P3. Thus, P3 can have a profound negative regulatory effect on N-type (and also R-type) calcium channels by Causing a hyperpolarizing shift of the inactivation without affecting ultra-slow and closed-state inactivation properties.

Simulação da destilação molecular de filme descendente para o petróleo

The heavy part of the oil can be used for numerous purposes, e.g. to obtain lubricating oils. In this context, many researchers have been studying alternatives such separation of crude oil components, among which may be mentioned molecular distillation. Molecular distillation is a forced evaporation technique different from other conventional processes in the literature. This process can be classified as a special distillation case under high vacuum with pressures that reach extremely low ranges of the order of 0.1 Pascal. The evaporation and condensation surfaces must have a distance from each other of the magnitude order of mean free path of the evaporated molecules, that is, molecules evaporated easily reach the condenser, because they find a route without obstacles, what is desirable. Thus, the main contribution of this work is the simulation of the falling-film molecular distillation for crude oil mixtures. The crude oil was characterized using UniSim® Design and R430 Aspen HYSYS® V8.5. The results of this characterization were performed in spreadsheets of Microsoft® Excel®, calculations of the physicochemical properties of the waste of an oil sample, i.e., thermodynamic and transport. Based on this estimated properties and boundary conditions suggested by the literature, equations of temperature and concentration profiles were resolved through the implicit finite difference method using the programming language Visual Basic® (VBA) for Excel®. The result of the temperature profile showed consistent with the reproduced by literature, having in their initial values a slight distortion as a result of the nature of the studied oil is lighter than the literature, since the results of the concentration profiles were effective allowing realize that the concentration of the more volatile decreases and of the less volatile increases due to the length of the evaporator. According to the transport phenomena present in the process, the velocity profile tends to increase to a peak and then decreases, and the film thickness decreases, both as a function of the evaporator length. It is concluded that the simulation code in Visual Basic® language (VBA) is a final product of the work that allows application to molecular distillation of petroleum and other similar mixtures.

Filogenia molecular do gênero Morganella Zeller (Fungi, Basidiomycota) utilizando marcadores ITS

With the development and improvement of techniques for molecular studies and their subsequent application to the systematic, significant changes occurred in the classification of gasteroid fungi. The genus Morganella belongs to the family Lycoperdaceae, and is characterized mainly by lignicolous habit and presence of paracapilicium. Recent data demonstrate the discovery of new species for the group and the existence of a wide variety of species occurring in tropical ecosystems. However, the phylogenetic relationships of the genus, as well as the taxonomic classification, still require revisions to be better understood, the literature studies that address this issue are still very scarce. Thus, the objective of this study was to conduct studies of molecular phylogeny with species of the genus Morganella, to enhance understanding of the phylogeny of the group by including tropical species data. For this, the specimens used both for DNA extractions as for morphological review were obtained from Brazilian and foreign herbaria. For morphological analysis were observed characters relevant to the group's taxonomy. For phylogenetic analysis the Maximum Parsimony and Bayesian Analyzes were used, using the internal transcribed spacer (ITS) of nuclear ribosomal DNA. In phylogenetic analyzes, representatives from Morganella form a monophyletic clade with good support value and based on these results the genus should not be included as subgenus of Lycoperdon. The analysis indicated that M. pyriformis was not grouped with other representatives of Morganella, and therefore should not be included in the group as representative of Apioperdon subgenus because it is a Lycoperdon representative. Moreover, M. fuliginea, M. nuda, M. albostipitata, M. velutina, M. subincarnata are grouped with high support values within the genus Morganella. Morganella arenicola based on morphological and molecular studies does not aggregate in Morganella. Morganella nuda was grouped with M. fuliginea giving indications that can be treated as an intraspecific variation. The results of the analyzes favor to a better understanding of the species of Morganella. However, additional studies using a greater number of species, as well as other molecular markers are needed for a better understanding of the phylogenetic of Morganella.

A desigualdade espacial do Baixo Peso ao Nascer no Brasil

Low birth weight (LBW) is a risk factor for neonatal and infant morbidity and mortality. In Brazil the highest percentages of low birth weight occur in regions of higher socio-economic status. The scope of this article is to ascertain the spatial distribution of low birth weight rates and the correlation with social and service indicators. The scale is ecological taking all the Brazilian states as units of analysis. The spatial analysis technique is the methodology used together with data from SINASC, IPEA and IBGE for 2009. Higher rates of low birth weight are found in the south/southeastern states (Global Moran: 0.267, p = 0.02). Clusters of the high-high type in the Southeast and of the low-low variety in states in the Amazon region are detected. The spatial inequality of low birth weight reflects the socio-economic conditions of the states. More developed regions have higher rates of low birth weight, therefore, the presence of the service and its use decrease infant mortality and increase LBW.

Concentração do óleo de girassol em compostos insaturados utilizando destilação molecular

Vegetable oils are characterized as important raw materials in the supplying of natural substances of interest pharmaceutical, food and cosmetic industry. Sunflower oil stands out for its important composition present in unsaturated fatty acids such as oleic acid (C18:1) and linoleic (C18:2), responsible for many health benefits. The main objective of this study is obtain enriched fractions in unsaturated compounds from refined sunflower oil. The oil used in this study was characterized by the determination of some properties, like iodine number, acid number and viscosity. A transesterification was done to transform the triglycerides into their corresponding methyl esters of fatty acids. These was submitted the molecular distillation process, for present as an efficient alternative to separation and purification of these substances, using high vacuum and low temperatures. Of the esters fractions that was obtained, were analyzed by gas chromatography. The experimental design technique was used to evaluate the influence of the temperature variation of evaporation and condensation system on the percentage obtained residue. The evaporator temperature proved to be the most influential variable on the studied response. The optimized conditions for the answer was studied at 100 °C for evaporator temperature and 10 °C for the condenser temperature. The graph of "split ratio" showed that for the lowest flow feed (1 mL/min) and higher evaporator temperature (110 °C) was obtained in the largest fraction of distillate. It also used the study of the influence of evaporator temperature on the concentration of unsaturated compounds. The best operating conditions for temperature was 90 °C reached 82.21 % of unsaturated compounds. Elimination curves of the unsaturated compounds present in the distillate stream were obtained. The simulation results of the molecular distillation process of sunflower oil showed the concentration profiles for three different feed flow rates. The speed, temperature and thickness profiles of the liquid film were obtained. The speed of the film increases as the fluid flows through the walls of the evaporator, reaching a maximum on length of 0.075 m. The film thickness decreases on the route, since many compounds are volatilized. The result of the temperature profile had to be consistent with the literature reproduced, being constant after reaching the maximum operating temperature in the length of 0.15 m. This study allowed characterizing and focusing, through experimental analysis, unsaturated compounds and observing the sunflower oil´s behavior through process simulation.

Concentração do óleo de girassol em compostos insaturados utilizando destilação molecular

Vegetable oils are characterized as important raw materials in the supplying of natural substances of interest pharmaceutical, food and cosmetic industry. Sunflower oil stands out for its important composition present in unsaturated fatty acids such as oleic acid (C18:1) and linoleic (C18:2), responsible for many health benefits. The main objective of this study is obtain enriched fractions in unsaturated compounds from refined sunflower oil. The oil used in this study was characterized by the determination of some properties, like iodine number, acid number and viscosity. A transesterification was done to transform the triglycerides into their corresponding methyl esters of fatty acids. These was submitted the molecular distillation process, for present as an efficient alternative to separation and purification of these substances, using high vacuum and low temperatures. Of the esters fractions that was obtained, were analyzed by gas chromatography. The experimental design technique was used to evaluate the influence of the temperature variation of evaporation and condensation system on the percentage obtained residue. The evaporator temperature proved to be the most influential variable on the studied response. The optimized conditions for the answer was studied at 100 °C for evaporator temperature and 10 °C for the condenser temperature. The graph of "split ratio" showed that for the lowest flow feed (1 mL/min) and higher evaporator temperature (110 °C) was obtained in the largest fraction of distillate. It also used the study of the influence of evaporator temperature on the concentration of unsaturated compounds. The best operating conditions for temperature was 90 °C reached 82.21 % of unsaturated compounds. Elimination curves of the unsaturated compounds present in the distillate stream were obtained. The simulation results of the molecular distillation process of sunflower oil showed the concentration profiles for three different feed flow rates. The speed, temperature and thickness profiles of the liquid film were obtained. The speed of the film increases as the fluid flows through the walls of the evaporator, reaching a maximum on length of 0.075 m. The film thickness decreases on the route, since many compounds are volatilized. The result of the temperature profile had to be consistent with the literature reproduced, being constant after reaching the maximum operating temperature in the length of 0.15 m. This study allowed characterizing and focusing, through experimental analysis, unsaturated compounds and observing the sunflower oil´s behavior through process simulation.

IRAS 00183-7111: ALMA and X-ray view of an ultra luminous infrared galaxy

The aim of this Thesis work is to study the multi-frequency properties of the Ultra Luminous Infrared Galaxy (ULIRG) IRAS 00183-7111 (I00183) at z = 0.327, connecting ALMA sub-mm/mm observations with those at high energies in order to place constraints on the properties of its central power source and verify whether the gas traced by the CO may be responsible for the obscuration observed in X-rays. I00183 was selected from the so-called Spoon diagnostic diagram (Spoon et al. 2007) for mid-infrared spectra of infrared galaxies based on the equivalent width of the 6.2 μm Polycyclic Aromatic Hydrocarbon (PAH) emission feature versus the 9.7 μm silicate strength. Such features are a powerful tool to investigate the contribution of star formation and AGN activity in this class of objects. I00183 was selected from the top-left region of the plot where the most obscured sources, characterized by a strong Si absorption feature, are located. To link the sub-mm/mm to the X-ray properties of I00183, ALMA archival Cycle 0 data in Band 3 (87 GHz) and Band 6 (270 GHz) have been calibrated and analyzed, using CASA software. ALMA Cycle 0 was the Early Science program for which data reprocessing is strongly suggested. The main work of this Thesis consisted in reprocessing raw data to provide an improvement with respect to the available archival products and results, which were obtained using standard procedures. The high-energy data consists of Chandra, XMM-Newton and NuSTAR observations which provide a broad coverage of the spectrum in the energy range 0.5 − 30 keV. Chandra and XMM archival data were used, with an exposure time of 22 and 22.2 ks, respectively; their reduction was carried out using CIAO and SAS software. The 100 ks NuSTAR are still private and the spectra were obtained by courtesy of the PI (K. Iwasawa). A detailed spectral analysis was done using XSPEC software; the spectral shape was reproduced starting from simple phenomenological models, and then more physical models were introduced to account for the complex mechanisms that involve this source. In Chapter 1, an overview of the scientific background is discussed, with a focus on the target, I00183, and the Spoon diagnostic diagram, from which it was originally selected. In Chapter 2, the basic principles of interferometry are briefly introduced, with a description of the calibration theory applied to interferometric observations. In Chapter 3, ALMA and its capabilities, both current and future, are shown, explaining also the complex structure of the ALMA archive. In Chapter 4, the calibration of ALMA data is presented and discussed, showing also the obtained imaging products. In Chapter 5, the analysis and discussion of the main results obtained from ALMA data is presented. In Chapter 6, the X-ray observations, data reduction and spectral analysis are reported, with a brief introduction to the basic principle of X-ray astronomy and the instruments from which the observations were carried out. Finally, the overall work is summarized, with particular emphasis on the main obtained results and the possible future perspectives.

Infecções por enterobacteriaceae resistente aos carbapenêmicos em hospital de ensino: epidemiologia e caracterização molecular

Introduction: The production of KPC (Klebsiella pneumoniae carbapenemase) has become an important mechanism of carbapenem-resistance among Enterobacteriaceae strains. In Brazil, KPC is already widespread and its incidence has increased significantly, reducing treatment options. The “perfect storm” combination of the absence of new drug developmentand the emergence of multidrug-resistant strains resulted in the need for the use of older drugs, with greater toxicity, such as polymyxins. Aims: To determine the occurrence of carbapenemase-producing strains in carbapenem-resistant Enterobacteriaceae isolated from patients with nosocomial infection/colonization during September/2014 to August/2015, to determine the risk factors associated with 30-day- mortality and the impact of inappropriate therapy. Materials and Methods: We performed a case control study to assess the risk factors (comorbidities, invasive procedures and inappropriate antimicrobial therapy) associated with 30-day-mortality, considering the first episode of infection in 111 patients. The resistance genes blaKPC, blaIMP, blaVIM and blaNDM-1 were detected by polymerase chain reaction technique. Molecular typing of the strains involved in the outbreak was performed by pulsed field gel electrophoresis technique. The polymyxin resistance was confirmed by the microdilution broth method. Results: 188 episodes of carbapenem-resistant Enterobacteriaceae infections/colonizations were detected; of these, 122 strains were recovered from the hospital laboratory. The presence of blaKPC gene were confirmed in the majority (74.59%) of these isolates. It was not found the presence of blaIMP , blaVIM and blaNDM-1 genes. K. pneumoniae was the most frequent microorganism (77,13%), primarily responsible for urinary tract infections (21,38%) and infections from patients of the Intensive Care Unit (ICU) (61,38%). Multivariate statistical analysis showed as predictors independently associated with mortality: dialysis and bloodstream infection. The Kaplan-Meier curve showed a lower probability of survival in the group of patients receiving antibiotic therapy inappropriately. Antimicrobial use in adult ICU varied during the study period, but positive correlation between increased incidence of strains and the consumption was not observed. In May and July 2015, the occurrence rates of carbapenem-resistant Enterobacteriaceae KPC-producing per 1000 patient-days were higher than the control limit established, confirming two outbreaks, the first caused by colistin-susceptible KPC-producing K. pneumoniae isolates, with a polyclonal profile and the second by a dominant clone of colistin-resistant (≥ 32 μg/mL) KPC-producing K. pneumoniae. The cross transmission between patients became clear by the temporal and spatial relationships observed in the second outbreak, since some patients occupied the same bed, showing problems in hand hygiene adherence among healthcare workers and inadequate terminal disinfection of environment. The outbreak was contained when the ICU was closed to new admissions. Conclusions: The study showed an endemicity of K. pneumoniae KPC-producing in adult ICU, progressing to an epidemic monoclonal expansion, resulted by a very high antibiotic consumption of carbapenems and polymyxins and facilitated by failures in control measures the unit.

Misura UHF (Ultra High Frequency) delle scariche parziali nei sistemi isolati a gas: metodologie per la verifica della sensibilità di misura

Le apparecchiature di manovra tramite isolamento a gas (GIS) sono in funzione da più di 45 anni e hanno dimostrato un alto livello di affidabilità, con tassi di difetto molto bassi. Tuttavia, il riscontro pratico indica che alcuni dei guasti che si verificano durante il servizio sono legati a difetti del sistema di isolamento. Molti di questi difetti possono essere rilevati tramite diagnostica con scariche parziali (PD). Per la rilevazione PD, viene utilizzato il metodo UHF perché meno sensibile ai disturbi e quindi più facile da gestire in confronto al metodo convenzionale secondo IEC 60270. Un rapporto di Electra pubblicato nel 1999 dal CIGRE Task Force 15/33.03.05 descrive la procedura in due fasi per la verifica della sensibilità del sistema UHF in modo molto generale. Dopo 15 anni dalla sua applicazione, è diventata necessaria una descrizione più dettagliata, sia su misure necessarie al test di laboratorio (Passaggio 1) che sul test in loco (Passaggio 2).

Componentes poliméricos de alto desempenho para a indústria automóvel

Atualmente, a utilização e as diversas aplicações de materiais poliméricos seguem tendências crescentes, pelo que se torna necessário aprofundar a compreensão do seu comportamento e funcionalidades. Neste contexto, na presente dissertação analisa-se a fabricação e características de rolamentos poliméricos para a suspensão automóvel. Estes rolamentos visam a substituição dos clássicos rolamentos metálicos. Esta substituição tem por objetivos garantir a melhoria do funcionamento dos rolamentos, bem como o seu usufruto, contribuindo para um maior conforto e segurança dos passageiros e para uma redução do peso do veículo, com consequente diminuição do consumo do combustível e melhoria da eficiência. Sendo o poliacetal (POM) e a poliamida (PA) considerados polímeros de alto desempenho, estes polímeros reúnem boas características para aplicação na fabricação de dispositivos com funcionalidades exigentes como é o caso dos rolamentos. O presente trabalho aborda o estudo de algumas das suas propriedades, de modo a obter informações relevantes quanto à respetiva aplicação em rolamentos de suspensão, tendo como foco principal a análise da matéria-prima utilizada. Deste modo, alteraram-se as formulações variando-se os teores de material virgem e reciclado, estudou-se o ser comportamento mecânico, reológico e térmico: fizeram-se análises reológicas através do estudo do MFI a fim de se obterem informações complementares ao estudo mecânico, realizaram-se análises térmicas para avaliar a possibilidade de degradação térmica do material e, no caso da PA66-30GF, recorreu-se à microscopia eletrónica de varrimento para se estudar os aspetos microestruturais deste compósito reforçado com fibra de vidro. Adicionalmente, procedeu-se à análise da rugosidade superficial dos componentes dos rolamentos e quantificou-se o torque dos mesmos. A partir dos estudos anteriores, foi possível concluir que o POM apresenta um comportamento mecânico estável mesmo utilizando uma formulação com 100% de material reciclado. Este comportamento não se verificou na PA6630GF, dado que as suas propriedades mecânicas são afetadas de forma significativa pelo teor de reciclado na formulação. Com o estudo do torque determinou-se o valor limite do momento de torsão do rolamento que garante o seu bom funcionamento e eficácia.

Factores de riesgo maternos asociados con bajo peso al nacer en el Hospital Vicente Corral Moscoso, Cuenca febrero-junio 2004

El bajo peso al nacer se ha definido como un peso menor de 2.500 gr. en el momento del nacimiento. El objetivo fue conocer los factores de riesgo maternos asociados con bajo peso al nacer por lo que se hizo un estudio de casos y controles precesado en EPI INFO 2002 con una muestra calculdada de 100 pacientes con Power de 80y IC 95que cincluyó edad materna, estado civil, talla materna menos de 141 cm, peso materno, antecedentes de abortos previos, antecedentes de muerte fetal, hipertensión crónica, diabetes, enfermedad cardíaca, renal, epilepsia, primiparidad, intervalo intergenésico menor que 2 años, si han cursado en el embarazo actual con amenaza de aborto, preclampsia/eclampsia. ITU, placenta previa, anomalías congénitas fetales, niños pequeños a su cargo, controles prenatales, sexo fetal, trabajo materno, consumo de alcohol, tabaco y drogas. Los factores de riesgo que se encontró fueron edad materna menor de 19 años (OR 4.57), abortos previos (OR 3.92), antecedentes de muerte fetal (OR 3.13), primiparidad (OR 1.38), intervalo intergenésico menor que 2 años (OR 1.84), amenaza de aborto durante el embarazo actual (OR 3.91), Preclampsia/eclampsia (OR 6.77), menos de 6 controles prenatales (OR 2.24), los otros factores de riesgo estudiados no tuvieron una representación estadísticamente significativa

Atividades biológicas de xilana de sabugo de milho

The corn cob is an agricultural by-product still little used, this in part due to the low knowledge of the biotechnological potential of their molecules. Xylan from corn cobs (XSM) is a polysaccharide present in greater quantity in the structure of plant and its biotechnology potential is little known. This study aimed to the extraction, chemical characterization and evaluation of biological activities of xylan from corn cobs. To this end, corncobs were cleaned, cut, dried and crushed, resulting in flour. This was subjected to a methodology that combines the use of alkaline conditions with waves of ultrasound. After methanol precipitation, centrifugation and drying was obtained a yield of 40% (g/g flour). Chemical analysis indicated a high percentage of polysaccharides in the sample (60%) and low contamination by protein (0.4%) and phenolic compounds (> 0.01%). Analysis of monosaccharide composition indicated the presence of xylose:glucose:arabinose:galactose:mannose:glucuronic acid in a molar ratio 50:20:15:10:2.5:2.5. The presence of xylan in the sample was confirmed by nuclear magnetic resonance (¹H and ¹³C) and infrared spectroscopy (IR). Tests were conducted to evaluate the antioxidant potential of XSM. This showed a total antioxidant capacity of 48.45 EAA/g sample. However, did not show scavenging activity of superoxide and hydroxyl radical and also reducing power. But, showing a high capacity chelating iron ions with 70% with about 2 mg/mL. The ability to XSM to influence cell proliferation in culture was also evaluated. This polymer did not influence the proliferation of normal fibroblast cells (3T3), however, decreased the rate of proliferation of tumor cells (HeLa) in a dose-dependent, reaching an inhibition of about 50% with a concentration around 2 mg/mL. Analyzing proteins related to cell death, by immunoblotting, XSM increases the amount of Bax, Bcl-2 decrease, increase cytochrome c and AIF, and reduce pro-caspase-3, indicating the induction of cell death induced apoptosis dependent and independent of caspase. XSM did not show anticoagulant activity in the PT test. However, the test of activated partial thromboplastin time (aPTT), XSM increased clotting time at about 5 times with 600 μg of sample compared with the negative control. The presence of sulfate on the XSM was discarded by agarose gel electrophoresis and IR. After carboxyl-reduction of XSM the anticoagulant activity decreased dramatically. The data of this study demonstrate that XSM has potential as antioxidant, antiproliferative and anticoagulant compound. Future studies to characterize these activities of XSM will help to increase knowledge about this molecule extracted from corn and allow their use in functional foods, pharmaceuticals and chemical industries.

Comparação entre técnicas de aferição da temperatura corpórea em micos-estrela cativos (Callithrix penicillata) e sua relação com parâmetros hematológicos, peso corporal e umidade e temperatura do ambiente

Dissertação (mestrado)—Universidade de Brasília, Faculdade de Ciências da Saúde, Programa de Pós-Graduação em Ciências da Saúde, 2015.

Comparação entre técnicas de aferição da temperatura corpórea em micos-estrela cativos (Callithrix penicillata) e sua relação com parâmetros hematológicos, peso corporal e umidade e temperatura do ambiente

Dissertação (mestrado)—Universidade de Brasília, Faculdade de Ciências da Saúde, Programa de Pós-Graduação em Ciências da Saúde, 2015.