Determinação bromatológica de Pleurotus ostreatus cultivado em resíduos de diferentes cultivares de bananeira

The objective of this work was to evaluate the nutritional composition (raw protein, ether extract, raw fiber, FDA, FDN and ash) of the POS 09/100 strain of Pleurotus ostreatus grown in three combinations of residues (pseudo-stem, leave and pseudo-stem + leaf) and four banana tree cultivars (Thap maeo, Prata ana, Pelipita and Caipira). The basidiomata harvested were submitted to dehydration in a forced ventilation stove with temperature adjusted to 40 degrees C until reaching constant weight, being then grinded in a knife mill. The method proposed by Kjeldahl (1883) was used to determine total nitrogen. The Weende method (AOAC, 1997) was employed to determine crude fiber, acid-detergent fiber (ADF) and neutral detergent fiber (NDF). According to the results obtained, crude protein, ash, ADF and NDF contents varied with the kind of residue and banana tree cultivar; the substrate prepared with leaves of banana tree (Prata Ana cultivar) yielded the highest crude protein (35.4%) and ash (6.7%) contents in the basidiomata of P. streams; the substrate prepared with pseudo-stein of banana tree (Prata Ana cultivar) provided the highest ADF (31.6%) and NDF (41.9%) contents in the basidiomata of P. ostreatus. Ether extract and crude fiber contents of P. ostreatus didn't vary in function of the treatments, with averages of 2.45 and 11.27%, respectively.

Determinação da relação central. Estudo sobre as posições laterais da mandíbula, em relação à linha mediana facial, em função de dois métodos para esta determinação.

The authors studied the lateral positional desviations of the mandible, in relation to the facial median line in 30 (thirty) full edentulous patients, with the purpose to verify the influence of the unstrained guided (chinpoint guidance) and deglutition methods for the determination of centric relation. According the results obtained they conclude that the unstrained guided method produced a mandibular lateral desviation with a mean value of the 0.752 mm and in the deglutition method the mean value observed was 1.109 mm. The statistical analysis of the results revealed for the unstrained guided method a proportion of the points to the right and left of the median line not statistically significant, while for the deglutition method the difference was statistically significant at a level of 5%.

Avaliação tardia da função renal em doentes com paracoccidioidomicose tratados com anfotericina B por meio da determinação do ritmo de filtração glomerular com EDTA Cr51

A late survey of the renal function was performed in eighteen patients with paracoccidioidomycosis treated with amphotericin B, according to the glomerular filtration rate (RFG). The method was compartment analysis by single injection using EDTA Cr51, determined by its 'half biological life' and dosages of blood urea nitrogen and creatinine. The patients were seventeen males and one female. They were from 22 to 76 years old. Ten of these patients received 2 g of amphotericin B and eight of them received 4 g. There were no expressive difference between the two groups, taking into account age, dose in mg/kg of weight/day, time of conclusion of the treatment, urea, creatinine, glomerular filtration was smaller than the normal, and average of the half biological life of the EDTA Cr51 was large than the normal. The achieved results permitted us to consider that the amphotericin B determines deficit of renal function. However, by the present study, it hasn't been possible to affirm if the modifications are definitive.

Determinação de dureza de ligas de cobre, na forma como são recebidas e após a fundição, em função das técnicas de fusão.

It was evaluated the Vickers hardness of five high-copper casting alloys, in their original package form and after casting, according to the casting method used. That way, ten ingots, supplied by the manufacturers of each alloy, were included in self-curing acrylic resin, polished, numerated and submitted to Vickers hardness test at load of 200 g during 30 seconds. Afterwards the numerated ingots were removed from the acrylic resin and five of those were cast in an electrical casting machine and the other five in a centrifugal casting machine with an air/gas torch. The specimens obtained were included in self-curing acrylic resin, polished and submitted to Vickers hardness test. As a result it was verified that there is a variation of hardness among the alloys tested, and the use of the electrical casting machine produced lower hardness values than those produced when used the centrifugal casting machine with an air/gas torch. Also, there is a decrease of hardness of the cast alloys when they are tested in their original form and after casting.

Um Modelo para a Determinação do Equilíbrio Térmico de Bovinos em Ambientes Tropicais

An equation based on heat transfer theory was presented to estimate the rate of heat loss from cattle exposed to a tropical environment, specified by the air temperature, humidity, solar radiation, and wind speed. The animals' variables (sweating rate, rectal temperature, respiratory rate, surface temperature, haircoat color, and body weight) were considered together with environmental variables (air temperature and humidity, solar radiation, wind speed, and globe temperature). The equation allows the prediction of (a) the metabolic heat production level necessary to balance heat losses under specified environmental conditions; (b) the combination of environmental factors that provide a determined heat flux between a given animal and its environment.

Determinação de parâmetros genéticos em população de gonçalo-alves (Astronium fraxinifolium) através das características fisiológicas da semente

Seeds of Astronium fraxinifolium (Anarcadiaceae) were collected in two years, and submitted to tests of seed germination and vigour (first count, aging and electric conductivity), in order to verify the potencial of conservation and if variations in the seed quality presented on association with genetic parameters. Coefficient of heritability in average (ĥm 2) were 0.91 and 0.97 to germination; 0.90 and 0.96 to first count; 0.93 and 0.97 to aging and 0.95 and 0.99 to electric conductivity, for seeds collected in 1997 and 1998, respectively, evidencing a great heritability to all studied characteristics. Genetic variability was influenced more by environmental conditions of blooming and harvest of seeds than storage time.

Ocorrência e determinação do perfil de sensibilidade às drogas das cepas de Staphylococcus aureus isoladas de fossas nasais e orofaringe dos servidores hospitalares

Staphylococcus aureus is a very important hospital and community pathogen. This species is related to supurative disease, systemic and widespread metastatic lesions. The ability of S. aureus to develop resistance to antibiotics, more recently to methicillin, associates this bacteria with epidemic outbreaks of severe nosocomial infection. The source of staphylococcal infection is a patient with a staphylococcal lesion or a career member of the hospital staff. We aimed to detect the frequency of S. aureus isolated from anterior nares and oral cavities among the hospital staff in Bauru - SP, and to determine the antibiotic susceptibility of the isolates. Within 213 of the staff members analyzed. S. aureus was found in 94 (44.13%) of careers, with 47 (50%) of nasal carriers, 23 (24.4%) of oral carriers and 24 (25.5%) of both carriers. The biochemical characteristics analyzed for the species identification were similar to S. aureus ATCC 29213. All strains identified as S. aureus showed varied sensibility to the antimicrobial agents tested. No vancomicin resistant strains and only 8 (8.5%) strains with oxacilin resistance were found.

Breve revisão de métodos de determinação de resíduos do herbicida á cido 2,4-diclorofenoxiacético (2,4-D)

This paper supplies a revision about the main techniques of extraction, clean-up and pre-concentration of the herbicide 2,4-dichlorophenoxyacetic acid (2,4-D) in water and soil samples, as well as chromatographic methods and immune assays for its identification and quantification.

Influência da geometria do martelo na determinação da força durante o ensaio de impacto Charpy-V

The instrumentation applied to the Charpy test machine allows the accompaniment of the specimen answer front the impact load, in form of a sign characteristically dynamic representative of the deformation process and it fractures of material tested. The main advantages of the rehearsal conventional Charpy: low cost, manufacturing sample facilities and simple handle the machine. With the instrumentation, the number of information regarding the process of fracture of the specimen increases. In this work discusses the influence of the hammer geometry in determination of the force during the process of specimen fracture submitted to the instrumented impact test Charpy-V. The purpose is obtaining a hammer, in conformity with Norma ISO 14.556, with great sensibility to register the force during the impact. Two geometries different from hammers were instrumented and rehearsed with material of low tenacity, in this case the steel ABNT 4140 in the condition of having normalized. It could be proven as larger the sensibility of the hammer, adult will be the effects of the shock waves in the strain gages of the transducer.

Comparação de métodos de determinação da gravidade específica de ovos de poedeiras comerciais

The objective of this work was to compare the results of measuring the specific gravity (SG) of laying hen eggs by using a weighing apparatus and the saline flotation method (SFM). Two hundred eggs from two genetic lines were distributed randomly into two groups of 50 eggs per genetic line and were submitted to two different sequences of SG measurement. Not significant differences were found between the two methods. The weighing apparatus measured the SG of the eggs accurately as the SFM.

Métodos de coleta de fezes e determinação dos coeficientes de digestibilidade da fração protéica e da energia de alimentos para o pacu, Piaractus mesopotamicus (Holmberg, 1887)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Mensuração do comprimento das fibras para a determinação da madeira juvenil em Eucalyptus citriodora

The juvenile wood has peculiar characteristics from the anatomical structure and physical-mechanical properties, considering these aspects the knowledge of the wood is essential for wood adequate utilization. The aim of this work was to determinate the zone of juvenile wood of pith-bark direction in Eucalyptus citriodora. The juvenile and mature wood zones were determined across fiber length measurement in various height in the tree stem. Results showed that juvenile wood zone occurs approximately up to the 45 at 55 mm from the pith.

Determinação precoce do sexo fetal pela análise do DNA no plasma materno

Purpose: to verify the viability of early diagnosis of fetal gender in maternal plasma by the real-time polymerase chain reaction (real-time PCR) starting at the 5th week of pregnancy. Methods: peripheral blood was collected from pregnant women with single fetus starting at the 5th week of gestation. After centrifugation, 0.4 mL plasma was separated for fetal DNA extraction. The DNA was analyzed in duplicate by real-time PCR for two genomic regions, one of the Y chromosome and the other common to both sexes, through the TaqMan® method, which uses a pair of primers and a fluorescent probe. Patients who aborted were excluded. Results: a total of 79 determinations of fetal DNA in maternal plasma were performed in 52 pregnant women. The results of the determinations were compared to fetal gender after delivery. Accuracy according to gestational age was 92.6% (25 of 27 cases) at 5 weeks with 87% sensitivity, and 95.6% (22 of 23 cases) at 6 weeks with 92% sensitivity. Starting at the 7th week of pregnancy, accuracy was 100% (29 of 29 cases). Specificity was 100% regardless of gestational age. Conclusion: real-time PCR for the detection of fetal gender in maternal plasma starting at the 5th week of gestation has good sensitivity and excellent specificity. There was agreement of the results in 100% of the cases in which male gender was diagnosed, regardless of gestational age, and from the 7th week of gestation for female gender diagnosis.

Determinação da distribuição de um nível de turbidito na formação Macaé no campo de Namorado através de uso de atributos sísmicos

This study was developed on the basis of petrophysics characterization, 3D seismic interpretation, and rock-wire-log integration. The results were integrated with amplitude attribute through cross plot (rock attribute x amplitude value). 3D seismic data also allowed inteipreting the top of Lagoa Feia, Macaé, and Carapebus formations, and Outeiro Member. The analyses of the maps of structures and attributes, integrated with wire-log data, suggest that Namorado turbidite level is candidate to be mapped with stratigraphic attributes like AverageTroughAmplitude, RMS velocity and Total AbsoluteAmplitude. Lagoa Feia Formation attribute maps (Dip-Azimuth and TotalEnergy) allows to interpret a low fault density at the carbonate coquina level in the Namorado field. This level is also considered one at the best seismic reflector and an important reservoir of the Campos Basin.