Pocket data mining: towards collaborative data mining in mobile computing environments

Pocket Data Mining (PDM) is our new term describing collaborative mining of streaming data in mobile and distributed computing environments. With sheer amounts of data streams are now available for subscription on our smart mobile phones, the potential of using this data for decision making using data stream mining techniques has now been achievable owing to the increasing power of these handheld devices. Wireless communication among these devices using Bluetooth and WiFi technologies has opened the door wide for collaborative mining among the mobile devices within the same range that are running data mining techniques targeting the same application. This paper proposes a new architecture that we have prototyped for realizing the significant applications in this area. We have proposed using mobile software agents in this application for several reasons. Most importantly the autonomic intelligent behaviour of the agent technology has been the driving force for using it in this application. Other efficiency reasons are discussed in details in this paper. Experimental results showing the feasibility of the proposed architecture are presented and discussed.

Surface chemistry of glycine on Pt{111} in different aqueous environments

Adsorption of glycine on Ptf111g under UHV conditions and in different aqueous environments was studied by XPS (UHV and ambient pressure) and NEXAFS. Under UHV conditions, glycine adsorbs in its neutral molecular state up to about 0.15 ML. Further deposition leads to the formation of an additional zwitterionic species, which is in direct contact with the substrate surface, followed by the growth of multilayers, which also consist of zwitterions. The neutral surface species is most stable and decomposes at 360 K through a multi-step process which includes the formation of methylamine and carbon monoxide. When glycine and water are co-adsorbed in UHV at low temperatures (< 170 K) inter-layer diffusion is inhibited and the surface composition depends on the adsorption sequence. Water adsorbed on top of a glycine layer does not lead to significant changes in its chemical state. When glycine is adsorbed on top of a pre-adsorbed chemisorbed water layer or thick ice layer, however, it is found in its zwitterionic state, even at low coverage. No difference is seen in the chemical state of glycine when the layers are exposed to ambient water vapor pressure up to 0.2 Torr at temperatures above 300 K. Also the decomposition temperature stays the same, 360 K, irrespective of the water vapor pressure. Only the reaction path of the decomposition products is affected by ambient water vapor.

Foreign direct investment in high-risk environments: an historical perspective

Since the banking crisis of 2008 the global economy is perceived as riskier than before. Firms that cannot manage risks have withdrawn from countries in which they previously invested. These problems are not new. For centuries firms have invested in risky foreign environments, and many of them have succeeded. This paper reviews the risk management strategies of foreign investors. Using archival evidence and secondary sources it distinguishes the different types of risks that investors face and the different strategies by which risks can be managed. It investigates which strategies are used to manage which types of risk.

Review of the potential for co-firing of cassava rhizome for generating heat and power in cassava based bio-ethanol plant in Thailand

Biomass is an important source of energy in Thailand and is currently the main renewable energy source, accounting for 40% of the renewable energy used. The Department of Alternative Energy and E�ciency (DEDE), Ministry of Thailand, has been promoting the use of renewable energy in Thailand for the past decade. The new target for renewable energy usage in the country is set at 25% of the �nal energy demand in 2021. Thailand is the world’s fourth largest producer of cassava and this results in the production of signi�cant amounts of cassava rhizome which is a waste product. Cassava rhizome has the potential to be co-�red with coal for the production of heat and power. With suitable co-�ring ratios, little modi�cation will be required in the co-�ring technology. This review article is concerned with an investigation of the feasibility of co-�ring cassava rhizome in a combined heat and power system for a cassava based bio-ethanol plant in Thailand. Enhanced use of cassava rhizome for heat and power production could potentially contribute to a reduction of greenhouse gas emissions and costs, and would help the country to meet the 2021 renewable energy target.

Blended learning in distance education: Sri Lankan perspective

The purpose of this paper is to explore the implementation of online learning in distance educational delivery at Yellow Fields University (pseudonymous) in Sri Lanka. The implementation of online distance education at the University included the use of blended learning. The policy initiative to introduce online for distance education in Sri Lanka was guided by the expectation of cost reduction and the implementation was financed under the Distance Education Modernization Project. The paper presents one case study of a larger multiple case study research that employed an ethnographic research approach in investigating the impact of ICT on distance education in Sri Lanka. Documents, questionnaires and qualitative interviews were used for data collection. There was a significant positive relationship between ownership of computers and students’ ability to use computer for word processing, emailing and Web searching. The lack of access to computers and the Internet, the lack of infrastructure, low levels of computer literacy, the lack of local language content, and the lack of formal student support services at the University were found to be major barriers to implementing compulsory online activities at the University

Visual sensor fusion for active security in robotic industrial environments

This work presents a method of information fusion involving data captured by both a standard CCD camera and a ToF camera to be used in the detection of the proximity between a manipulator robot and a human. Both cameras are assumed to be located above the work area of an industrial robot. The fusion of colour images and time of light information makes it possible to know the 3D localization of objects with respect to a world coordinate system. At the same time this allows to know their colour information. Considering that ToF information given by the range camera contains innacuracies including distance error, border error, and pixel saturation, some corrections over the ToF information are proposed and developed to improve the results. The proposed fusion method uses the calibration parameters of both cameras to reproject 3D ToF points, expressed in a common coordinate system for both cameras and a robot arm, in 2D colour images. In addition to this, using the 3D information, the motion detection in a robot industrial environment is achieved, and the fusion of information is applied to the foreground objects previously detected. This combination of information results in a matrix that links colour and 3D information, giving the possibility of characterising the object by its colour in addition to its 3D localization. Further development of these methods will make it possible to identify objects and their position in the real world, and to use this information to prevent possible collisions between the robot and such objects.

Visual sensor fusion for active security in robotic industrial environments

This work presents a method of information fusion involving data captured by both a standard charge-coupled device (CCD) camera and a time-of-flight (ToF) camera to be used in the detection of the proximity between a manipulator robot and a human. Both cameras are assumed to be located above the work area of an industrial robot. The fusion of colour images and time-of-flight information makes it possible to know the 3D localization of objects with respect to a world coordinate system. At the same time, this allows to know their colour information. Considering that ToF information given by the range camera contains innacuracies including distance error, border error, and pixel saturation, some corrections over the ToF information are proposed and developed to improve the results. The proposed fusion method uses the calibration parameters of both cameras to reproject 3D ToF points, expressed in a common coordinate system for both cameras and a robot arm, in 2D colour images. In addition to this, using the 3D information, the motion detection in a robot industrial environment is achieved, and the fusion of information is applied to the foreground objects previously detected. This combination of information results in a matrix that links colour and 3D information, giving the possibility of characterising the object by its colour in addition to its 3D localisation. Further development of these methods will make it possible to identify objects and their position in the real world and to use this information to prevent possible collisions between the robot and such objects.

The interdependence of continental warm cloud properties derived from unexploited solar background signals in ground-based lidar measurements

We have extensively analysed the interdependence between cloud optical depth, droplet effective radius, liquid water path (LWP) and geometric thickness for stratiform warm clouds using ground-based observations. In particular, this analysis uses cloud optical depths retrieved from untapped solar background signals that are previously unwanted and need to be removed in most lidar applications. Combining these new optical depth retrievals with radar and microwave observations at the Atmospheric Radiation Measurement (ARM) Climate Research Facility in Oklahoma during 2005–2007, we have found that LWP and geometric thickness increase and follow a power-law relationship with cloud optical depth regardless of the presence of drizzle; LWP and geometric thickness in drizzling clouds can be generally 20–40 % and at least 10 % higher than those in non-drizzling clouds, respectively. In contrast, droplet effective radius shows a negative correlation with optical depth in drizzling clouds and a positive correlation in non-drizzling clouds, where, for large optical depths, it asymptotes to 10 μm. This asymptotic behaviour in non-drizzling clouds is found in both the droplet effective radius and optical depth, making it possible to use simple thresholds of optical depth, droplet size, or a combination of these two variables for drizzle delineation. This paper demonstrates a new way to enhance ground-based cloud observations and drizzle delineations using existing lidar networks.

Language learning in the public eye: an analysis of newspapers and official documents in England

This article considers the issue of low levels of motivation for foreign language learning in England by exploring how language learning is conceptualised by different key voices in that country through the examination of written data: policy documents and reports on the UK's language needs, curriculum documents, and press articles. The extent to which this conceptualisation has changed over time is explored, through the consideration of documents from two time points, before and after a change in government in the UK. The study uses corpus analysis methods in this exploration. The picture that emerges is a complex one regarding how the 'problems' and 'solutions' surrounding language learning in that context are presented in public discourse. This, we conclude, has implications for the likely success of measures adopted to increase language learning uptake in that context.

Modelling as learning: a consultancy methodology for enhancing learning in management teams

This article reviews the experiences of a practising business consultancy division. It discusses the reasons for the failure of the traditional, expert consultancy approach and states the requirements for a more suitable consultancy methodology. An approach called ‘Modelling as Learning’ is introduced, its three defining aspects being: client ownership of all analytical work performed, consultant acting as facilitator and sensitivity to soft issues within and surrounding a problem. The goal of such an approach is set as the acceleration of the client's learning about the business. The tools that are used within this methodological framework are discussed and some case studies of the methodology are presented. It is argued that a learning experience was necessary before arriving at the new methodology but that it is now a valuable and significant component of the division's work.

The role of statistical learning in the acquisition of motion event construal in a second language

Learning to talk about motion in a second language is very difficult because it involves restructuring deeply entrenched patterns from the first language (Slobin 1996). In this paper we argue that statistical learning (Saffran et al. 1997) can explain why L2 learners are only partially successful in restructuring their second language grammars. We explore to what extent L2 learners make use of two mechanisms of statistical learning, entrenchment and pre-emption (Boyd and Goldberg 2011) to acquire target-like expressions of motion and retreat from overgeneralisation in this domain. Paying attention to the frequency of existing patterns in the input can help learners to adjust the frequency with which they use path and manner verbs in French but is insufficient to acquire the boundary crossing constraint (Slobin and Hoiting 1994) and learn what not to say. We also look at the role of language proficiency and exposure to French in explaining the findings.

Profile of European adults interested in internet-based personalized nutrition: The Food4Me Study

Purpose Personalised intervention may have greater potential for reducing the global burden of non-communicable diseases and for promoting better health and wellbeing across the life-span than the conventional “one size fits all” approach. However, the characteristics of individuals interested in personalised nutrition (PN) are unclear. Therefore, the aim of this study was to describe the characteristics of European adults interested in taking part in an internet-based PN study. Methods Individuals from seven European countries (UK, Ireland, Germany, the Netherlands, Spain, Greece and Poland) were invited to participate in the study via the Food4Me website (http://www.food4me.org). Two screening questionnaires were used to collect data on socio-demographic, anthropometric and health characteristics as well as dietary intakes. Results A total of 5662 individuals expressed an interest in the study (mean age 40 ± 12.7; range 15-87 years). Of these 64.6% were female and 96.9% were Caucasian. Overall, 12.9% were smokers and 46.8% reported the presence of a clinically diagnosed disease. Furthermore, 46.9% were overweight or obese and 34.9% were sedentary during leisure time. Assessment of dietary intakes showed that 54.3% of individuals reported consuming at least 5 portions of fruit and vegetables per day, 45.9% consumed more than 3 servings of wholegrains and 37.2% limited their salt intake to less than 5.75g per day. Conclusions Our data indicate that individuals volunteering to participate in an internet-based PN study are broadly representative of the European adult population, most of whom had adequate nutrient intakes but who could benefit from improved dietary choices and greater physical activity. Future use of internet-based PN approaches is thus relevant to a wide target audience.