Over-expression and purification strategies for recombinant multi-protein oligomers: A case study of Mycobacterium tuberculosis sigma/anti-sigma factor protein complexes

The function of a protein in a cell often involves coordinated interactions with one or several regulatory partners. It is thus imperative to characterize a protein both in isolation as well as in the context of its complex with an interacting partner. High resolution structural information determined by X-ray crystallography and Nuclear Magnetic Resonance offer the best route to characterize protein complexes. These techniques, however, require highly purified and homogenous protein samples at high concentration. This requirement often presents a major hurdle for structural studies. Here we present a strategy based on co-expression and co-purification to obtain recombinant multi-protein complexes in the quantity and concentration range that can enable hitherto intractable structural projects. The feasibility of this strategy was examined using the sigma factor/anti-sigma factor protein complexes from Mycobacterium tuberculosis. The approach was successful across a wide range of sigma factors and their cognate interacting partners. It thus appears likely that the analysis of these complexes based on variations in expression constructs and procedures for the purification and characterization of these recombinant protein samples would be widely applicable for other multi-protein systems. (C) 2010 Elsevier Inc. All rights reserved.

Performance study of high operating temperature HgCdTe mid wave infrared detector through numerical modeling

The design of present generation uncooled Hg1-xCdxTe infrared photon detectors relies on complex heterostructures with a basic unit cell of type (n) under bar (+)/pi/(p) under bar (+). We present an analysis of double barrier (n) under bar (+)/pi/(p) under bar (+) mid wave infrared (x = 0.3) HgCdTe detector for near room temperature operation using numerical computations. The present work proposes an accurate and generalized methodology in terms of the device design, material properties, and operation temperature to study the effects of position dependence of carrier concentration, electrostatic potential, and generation-recombination (g-r) rates on detector performance. Position dependent profiles of electrostatic potential, carrier concentration, and g-r rates were simulated numerically. Performance of detector was studied as function of doping concentration of absorber and contact layers, width of both layers and minority carrier lifetime. Responsivity similar to 0.38 A W-1, noise current similar to 6 x 10(-14) A/Hz(1/2) and D* similar to 3.1 x 10(10)cm Hz(1/2) W-1 at 0.1 V reverse bias have been calculated using optimized values of doping concentration, absorber width and carrier lifetime. The suitability of the method has been illustrated by demonstrating the feasibility of achieving the optimum device performance by carefully selecting the device design and other parameters. (C) 2010 American Institute of Physics. doi:10.1063/1.3463379]

Biomass gasification: Environmentally sound technology for decentralized power generation, a case study from India

This study aims at understanding the need for decentralized power generation systems and to explore the potential, feasibility and environmental implications of biomass gasifier-based electricity generation systems for village electrification. Electricity needs of villages are in the range of 5–20 kW depending on the size of the village. Decentralized power generation systems are desirable for low load village situations as the cost of power transmission lines is reduced and transmission and distribution losses are minimised. A biomass gasifier-based electricity generation system is one of the feasible options; the technology is readily available and has already been field tested. To meet the lighting and stationary power needs of 500,000 villages in India the land required is only 16 Mha compared to over 100 Mha of degraded land available for tree planting. In fact all the 95 Mt of woody biomass required for gasification could be obtained through biomass conservation programmes such as biogas and improved cook stoves. Thus dedication of land for energy plantations may not be required. A shift to a biomass gasifier-based power generation system leads to local benefits such as village self reliance, local employment and skill generation and promotion of in situ plant diversity plus global benefits like no net CO2 emission (as sustainable biomass harvests are possible) and a reduction in CO2 emissions (when used to substitute thermal power and diesel in irrigation pump sets).

Impact of climate change at species level: a case study of teak in India

In this study, we model the long-term effect of climate change on commercially important teak (Tectona grandis) and its productivity in India. This modelling assessment is based on climate projections of the regional climate model of the Hadley Center (HadRM3) and the dynamic vegetation model, IBIS. According to the model projections, 30% of teak grids in India are vulnerable to climate change under both A2 and B2 SRES scenarios because the future climate may not be optimal for teak at these grids. However, the net primary productivity and biomass are expected to increase because of elevated levels of CO2. Given these directions of likely impacts, it is crucial to further investigate the climate change impacts on teak and incorporate such findings into long-term teak plantation programs. This study also demonstrates the feasibility and limitations of assessing the impact of projected climate change at the species level in the tropics.

An investigation into the feasibility of fetal lung maturity prediction using statistical textural features

Fetal lung and liver tissues were examined by ultrasound in 240 subjects during 24 to 38 weeks of gestational age in order to investigate the feasibility of predicting the maturity of the lung from the textural features of sonograms. A region of interest of 64 X 64 pixels is used for extracting textural features. Since the histological properties of the liver are claimed to remain constant with respect to gestational age, features obtained from the lung region are compared with those from liver. Though the mean values of some of the features show a specific trend with respect to gestation age, the variance is too high to guarantee definite prediction of the gestational age. Thus, we restricted our purview to an investigation into the feasibility of fetal lung maturity prediction using statistical textural features. Out of 64 features extracted, those features that are correlated with gestation age and less computationally intensive are selected. The results of our study show that the sonographic features hold some promise in determining whether the fetal lung is mature or immature.

Structural Health Monitoring (SHM) Using Strain Gauges, PVDF Film and Fiber Bragg Grating (FBG) Sensors: A Comparative Study

The term Structural Health Monitoring has gained wide acceptance in the recent pastas a means to monitor a structure and provide an early warning of an unsafe conditionusing real-time data. Utilization of structurally integrated, distributed sensors tomonitor the health of a structure through accurate interpretation of sensor signals andreal-time data processing can greatly reduce the inspection burden. The rapidimprovement of the Fiber Bragg Grating sensor technology for strain, vibration andacoustic emission measurements in recent times make them a feasible alternatives tothe traditional strain gauges transducers and conventional Piezoelectric sensors usedfor Non Destructive Evaluation (NDE) and Structural Health Monitoring (SHM).Optical fiber-based sensors offers advantages over conventional strain gauges, PVDFfilm and PZT devices in terms of size, ease of embedment, immunity fromelectromagnetic interference(EMI) and potential for multiplexing a number ofsensors. The objective of this paper is to demonstrate the feasibility of Fiber BraggGrating sensor and compare its utility with the conventional strain gauges and PVDFfilm sensors. For this purpose experiments are being carried out in the laboratory on acomposite wing of a mini air vehicle (MAV). In this paper, the results obtained fromthese preliminary experiments are discussed.

Intense Acoustic Burst Ultrasound Modulated Optical Tomography for Elasticity Mapping of Soft Biological Tissue Mimicking Phantom: A Laser Speckle Contrast Analysis Study

This report addresses the assessment of variation in elastic property of soft biological tissues non-invasively using laser speckle contrast measurement. The experimental as well as the numerical (Monte-Carlo simulation) studies are carried out. In this an intense acoustic burst of ultrasound (an acoustic pulse with high power within standard safety limits), instead of continuous wave, is employed to induce large modulation of the tissue materials in the ultrasound insonified region of interest (ROI) and it results to enhance the strength of the ultrasound modulated optical signal in ultrasound modulated optical tomography (UMOT) system. The intensity fluctuation of speckle patterns formed by interference of light scattered (while traversing through tissue medium) is characterized by the motion of scattering sites. The displacement of scattering particles is inversely related to the elastic property of the tissue. We study the feasibility of laser speckle contrast analysis (LSCA) technique to reconstruct a map of the elastic property of a soft tissue-mimicking phantom. We employ source synchronized parallel speckle detection scheme to (experimentally) measure the speckle contrast from the light traversing through ultrasound (US) insonified tissue-mimicking phantom. The measured relative image contrast (the ratio of the difference of the maximum and the minimum values to the maximum value) for intense acoustic burst is 86.44 % in comparison to 67.28 % for continuous wave excitation of ultrasound. We also present 1-D and 2-D image of speckle contrast which is the representative of elastic property distribution.

Experimental study and simulation principles of an oil-gas multiphase transportation system

Presented is an experimental study on the performance of an oil-gas multiphase transportation system, especially on the multiphase flow patterns, multiphase pumping and multiphase metering of the system. A dynamic simulation analysis is conducted to deduce simulation parameters of the system and similarity criteria under simplified conditions are obtained. The reliability and feasibility of two-phase flow experiment with oil and natural gas simulated by water and air are discussed by using the similarity criteria.

Feasibility of Protein a for the Oriented Immobilization of Immunoglobulin on Silicon Surface for a Biosensor with Imaging Ellipsometry

The feasibility of using protein A to immobilize antibody on silicon surface for a biosensor with imaging ellipsometry was presented in this study. The amount of human IgG bound with anti-IgG immobilized by the protein A on silicon surface was much more than that bound with anti-IgG immobilized by physical adsorption. The result indicated that the protein A could be used to immobilize antibody molecules in a highly oriented manner and maintain antibody molecular functional configuration on the silicon surface. High reproducibility of the amount of antibody immobilization and homogenous antibody adsorption layer on surfaces could be obtained by this immobilization method. Imaging ellipsometry has been proven to be a fast and reliable detection method and sensitive enough to detect small changes in a molecular monolayer level. The combination of imaging ellipsometry and surface modification with protein A has the potential to be further developed into an efficient immunoassay protein chip.

Feasibility of adopting integrated rice-cum-fish culture system to enhance the development of conventional aquaculture participation in Niger State

In a survey conducted to find out the status of integrated rice-cum-fish culture in Niger State, Nigeria, 0.37 ha of Fadama wetlands was utilized for rice-cum-fish culture and at experimental stage. In the case study of this rice-cum-fish model, the Nile Tilapia (Oreochromis niloticus) was involved. The result was that 1,4720 kg/ha/yr could be produced using chick manure application under rice-cum-fish culture model. The available records reveal that 233,079 ha out of 495,000 ha of estimated Fadama in Niger State was used for rice cultivation in 1997. If 233,079 ha were to be used for integrated rice-cum fish culture, it is estimated that 343,092 mt of fish (Oreochromis niloticus) could be produced per year. The fish demand in Niger State in 2002 was 50,000 mt. The NPK application under rice-cum-fish production gave the best rice production estimated at 43,968.0 kg/ha/yr. The percentage increase in rice yield as well as increase in net income due to introduction of fish was 10.1 % and 54.4% respectively. The culture system is therefore recommended for adoption towards greater participation in aquaculture development by the farmers

Efficacy and safety of autologous platelet rich plasma for the treatment of vascular ulcers in primary care: Phase III study

Background: Vascular ulcers are commonly seen in daily practice at all levels of care and have great impact at personal, professional and social levels with a high cost in terms of human and material resources. Given that the application of autologous platelet rich plasma has been shown to decrease healing times in various different studies in the hospital setting, we considered that it would be interesting to assess the efficacy and feasibility of this treatment in primary care. The objectives of this study are to assess the potential efficacy and safety of autologous platelet rich plasma for the treatment of venous ulcers compared to the conventional treatment (moist wound care) in primary care patients with chronic venous insufficiency (C, clinical class, E, aetiology, A, anatomy and P, pathophysiology classification C6). Design: We will conduct a phase III, open-label, parallel-group, multicentre, randomized study. The subjects will be 150 patients aged between 40 and 100 years of age with an at least 2-month history of a vascular venous ulcer assigned to ten primary care centres. For the treatment with autologous platelet rich plasma, all the following tasks will be performed in the primary care setting: blood collection, centrifugation, separation of platelet rich plasma, activation of coagulation adding calcium chloride and application of the PRP topically after gelification. The control group will receive standard moist wound care. The outcome variables to be measured at baseline, and at weeks 5 and 9 later include: reduction in the ulcer area, Chronic Venous Insufficiency Quality of Life Questionnaire score, and percentage of patients who require wound care only once a week. Discussion: The results of this study will be useful to improve the protocol for using platelet rich plasma in chronic vascular ulcers and to favour wider use of this treatment in primary care.

Value chain analysis: shrimp, prawn and tilapia from the southern region of Bangladesh & feasibility analysis: brackish water sea-bass in the southern region in Bangladesh

The WorldFish Center is implementing the FtF Aquaculture Project in 20 southern districts in Bangladesh. The project is implemented under USAID’s Feed the Future initiative in collaboration with the Government of Bangladesh. The project contributes to achieving the ‘Feed the Future’ goals through four objectives: (i) dissemination of improved quality fish and shrimp seed, (ii) improving the nutrition and income status of farm households, (iii) increasing investment, employment and fish production through commercial aquaculture and (iv) policy and regulatory reform and institutional capacity building to support sustainable aquaculture growth. The project commissioned this study to gather insights into the value chains of shrimp, prawn and tilapia in the project region and the feasibility of promoting culture of brackish water sea-bass in the region. The findings and recommendations are expected to provide the foundation for the project to design its interventions for achieving its goals.

Feasibility of using sea surface temperature imagery to mitigate cheloniid sea turtle–fishery interactions off the coast of northeastern USA

As sea turtles migrate along the Atlantic coast of the USA, their incidental capture in fisheries is a significant source of mortality. Because distribution of marine cheloniid turtles appears to be related, in part, to sea surface temperature (SST), the ability to predict water temperature over the continental shelf could be useful in minimizing turtle–fishery interactions. We analyzed 10 yr of advanced very high resolution radiometer (AVHRR) SST imagery to estimate the proportion of 18 spatial zones, nearshore and offshore of Hatteras, North Carolina, USA (35° N), to north of Cape Sable, Nova Scotia (44° N), at temperatures >10 to 15°C, by week. Detailed examples for 11°C, the temperature employed by some management actions in the study area, and for 14°C, the lowest temperature at which turtles were sighted by some studies in the area, demonstrate a predictable pattern of rapid warming in March and April, followed by rapid cooling in October and November, with nearshore waters warming more rapidly than those offshore. Of those loggerhead turtles Caretta caretta that stranded, were sighted, or were incidentally captured between Cape Hatteras, North Carolina, and Cape Cod, Massachusetts, those at lower latitudes occurred when 25% or more of the area reached a water temperature of 11°C, while those in the northern zones did not occur until 50% or more of the area had reached a water temperature of 14°C. This analysis provides a means of predicting marine cheloniid turtle presence, which can be helpful in regulating fisheries that seasonally interact with turtles.

Economic feasibility of composite fish culture in leased-in village tanks of Kanyakumari district: an invesment analysis

Kanyakumari district belonging to the high rainfall zone has resource advantages for composite fish culture in the leased-in village tanks. There are more than 400 fish farmers operating in leased-in tanks following composite fish culture under the FFDA programme. To estimate the economic feasibility and financial viability of the enterprise, the present study was taken up. 38 fish farmers selected from the district provided the necessary information like capital investment, costs and return and constraints. The data collected were analysed and a farm nearest to the average farm situation was taken as the representative farm. Investment criteria like PayBack Period (PBP), Simple Rate of Returns (SRR), Net Present Value (NPV) and Benefit Cost Ratio (BCR) were estimated taking into account a period of 10 years, the period for which the village tanks are leased-out to fish farmers under the FFDA programme. The analysis indicated the profitability of composite fish culture in village tanks in the district and the results are discussed with recommendations.

Feasibility of bi-culture of mud crab (Scylla serrata) and shrimp (Penaeus monodon)

A study on the feasibility of bi-culture of mud crab (Scylla serrata) and shrimp (Penaeus monodon) in brackishwater earthen ponds (0.1 ha each) was carried out for a period of five months (March-August). Nursed shrimp juvenile (ABL:· 3.36±0.23 em and ABW: 0.26±0.04 g) and crab juvenile (ACL: 2.61±0.22 cm, ACW: 4.63±0.11 cm and ABW: 43±2.64 g) were stocked following the experimental design of shrimp 2/m2 (Treatment-1), shrimp 2/m2 and mud crab l/m2 (Treatment-2) and shrimp 2/m2 and mud crab 0.5/m2 (Treatment-3). Crabs were fed with chopped trash tilapia @ 10~5%, while shrimp were fed with Saudi-Bangla shrimp feed @ 3~5% of biomass twice daily. Significantly (p<0.05) higher specific growth rate (SGR) of shrimp and mud crab was 1.86% (g/day) in T2 and 0.83% (g/day) in T3, respectively. The survival of shrimp and mud crab also varied significantly (p<0.05) with a higher mean value of74.63% in Tl and 51.04% in T3, respectively. The production of shrimp (424.09 kg/ha) was significantly (p<0.05) higher in Tl and that of mud crab (568.80 kg/ha) in T2. Significantly (p<0.05) highest total production of 871.29 kg!ha was in T2 followed by 708.52 kg/ha in T3 and 424.09 kg/ha in Tl. The results indicate that mud crab can be cultured at a stocking rate of 1/m2 together with shrimp at 2/m2 •