Reconstruction of networks from their betweenness centrality

In this paper we study the reconstruction of a network topology from the values of its betweenness centrality, a measure of the influence of each of its nodes in the dissemination of information over the network. We consider a simple metaheuristic, simulated annealing, as the combinatorial optimization method to generate the network from the values of the betweenness centrality. We compare the performance of this technique when reconstructing different categories of networks –random, regular, small-world, scale-free and clustered–. We show that the method allows an exact reconstruction of small networks and leads to good topological approximations in the case of networks with larger orders. The method can be used to generate a quasi-optimal topology fora communication network from a list with the values of the maximum allowable traffic for each node.

The Boundaries of the Firm from the Extended Transaction Cost Economics Point of View - Empirical Study

Tutkimuksen tavoitteena oli tutkia yrityksen rajoja laajennetun transaktiokustannusteorian näkökulmasta. Tutkimus oli empiirinen tutkimus, jossa tutkittiin viittä toimialaa. Tutkimuksen tavoitteena oli verrata paperiteollisuutta teräs-, kemian-, ICT- ja energiateollisuuteen. Aineisto empiiriseen osioon kerättiin puolistrukturoiduilla teemahaastatteluilla. Tutkimus osoitti, että laajennettu transaktiokustannusteoria soveltuu hyvinyrityksen rajojen määrittelyyn. Staattinen transaktiokustannusteorian selitysaste ei ole riittävä, joten dynaaminen laajennus on tarpeellinen. Tutkimuksessa ilmeni, että paperiteollisuudella verrattuna muihin toimialoihin on suurimmat haasteet tehokkaiden rajojen määrittämisessä.

Transfer entropy reconstruction and labeling of neuronal connections from simulated calcium imaging

Neuronal dynamics are fundamentally constrained by the underlying structural network architecture, yet much of the details of this synaptic connectivity are still unknown even in neuronal cultures in vitro. Here we extend a previous approach based on information theory, the Generalized Transfer Entropy, to the reconstruction of connectivity of simulated neuronal networks of both excitatory and inhibitory neurons. We show that, due to the model-free nature of the developed measure, both kinds of connections can be reliably inferred if the average firing rate between synchronous burst events exceeds a small minimum frequency. Furthermore, we suggest, based on systematic simulations, that even lower spontaneous inter-burst rates could be raised to meet the requirements of our reconstruction algorithm by applying a weak spatially homogeneous stimulation to the entire network. By combining multiple recordings of the same in silico network before and after pharmacologically blocking inhibitory synaptic transmission, we show then how it becomes possible to infer with high confidence the excitatory or inhibitory nature of each individual neuron.

Can smartphones and tablets improve the management of childhood illness in Tanzania? A qualitative study from a primary health care worker's perspective.

BACKGROUND: The impact of the Integrated Management of Childhood Illness (IMCI) strategy has been less than anticipated because of poor uptake. Electronic algorithms have the potential to improve quality of health care in children. However, feasibility studies about the use of electronic protocols on mobile devices over time are limited. This study investigated constraining as well as facilitating factors that influence the uptake of a new electronic Algorithm for Management of Childhood Illness (ALMANACH) among primary health workers in Dar es Salaam, Tanzania. METHODS: A qualitative approach was applied using in-depth interviews and focus group discussions with altogether 40 primary health care workers from 6 public primary health facilities in the three municipalities of Dar es Salaam, Tanzania. Health worker's perceptions related to factors facilitating or constraining the uptake of the electronic ALMANACH were identified. RESULTS: In general, the ALMANACH was assessed positively. The majority of the respondents felt comfortable to use the devices and stated that patient's trust was not affected. Most health workers said that the ALMANACH simplified their work, reduced antibiotic prescription and gave correct classification and treatment for common causes of childhood illnesses. Few HWs reported technical challenges using the devices and complained about having had difficulties in typing. Majority of the respondents stated that the devices increased the consultation duration compared to routine practice. In addition, health system barriers such as lack of staff, lack of medicine and lack of financial motivation were identified as key reasons for the low uptake of the devices. CONCLUSIONS: The ALMANACH built on electronic devices was perceived to be a powerful and useful tool. However, health system challenges influenced the uptake of the devices in the selected health facilities.

Lake-level and salinity reconstruction from diatom analyses in Quillagua Formation (Late Neogene, Central Andean Forearc, Northern Chile)

A sedimentary and micropaleontological study of the Quillagua Formation provides a detailed paleohydrological reconstruction of the lacustrine system which occupied the present-day hyperarid Quillagua-Llamara fore-arc Basin (Northern Chile) from lattermost Miocene to Early Pliocene times.

Market Orientation in Rapidly Internationalizing Small Companies — Evidence from the Software Industry

For more than a decade, researchers have been aware of the increased pace of small-firm internationalization and the greater effect of these rapidly growing small businesses on the wealth, international trade, and job-creation opportunities of countries. Due to the small size of the home market, Finnish companies have been generally considered highly interested in internationalization. One particular domain in which rapid internationalization has been considered feasible is the global software business, with its knowledge-intensive nature and high growth potential. However, over time the failure rate of small entrepreneurial firms has remained especially high in high-technology markets. One of the reasons for this seems to lie in the fact that these companies are often formed by people with a strong technological background but limited competences in other areas. Further, research on the marketing capabilities of rapidly internationalizing high-tech firms has been scarce thus far. In addition, while there is much research on the first years of operations of rapidly internationalizing companies, it is not well known what becomes of them later on. Therefore, there is a need for more investigation into the managerial mindset, competences and decision-making in these small companies, especially from the perspective of how they acquire and exploit market knowledge, and enhance their networking capabilities in order to promote international expansion. The present study focuses on market orientation in small software firms that internationalize their operations rapidly in global software markets. It builds on qualitative data to illustrate how these companies develop their market-oriented product-market strategies during the process of increasing international commitment. It also shows how they manage their network relationships in order to be able to offer better customer service and to thrive in the fierce global competition. The study was conducted in the empirical context of Finnish small software companies, and the main data consists of interviews with top managers in these businesses. The interviews were designed to cover a minimum period of five years of the company's international operations, thus offering a retrospective in-depth perspective on market orientation, internationalization and partnerships in the given context. One particular focus is on less successfully internationalized software companies, and the challenges they face when approaching international markets. This study makes a significant contribution to the literature on market orientation for several reasons. First, building on data from the software industry, it clarifies the existing theory in the context of rapid internationalization and network relationships. Secondly, it provides a good body of evidence on market orientation in both successfully and less successfully internationalized companies, and identifies the key related differences between the two company groups. Thirdly, it highlights the importance of inter-firm networks in the rapid internationalization of small software firms, providing companies with important market knowledge and, in some cases, management challenges. Fourthly, this investigation clarifies market orientation in the context of different software-product strategies, thus, combining the perspectives of market orientation in both manufacturing and services. In sum, the results of the study are significant for both small software firms and public-policy makers since they shed light on the market-oriented managerial mindset and the market-information gathering and sharing processes that are needed in successful rapid internationalization.

Image quality in CT: From physical measurements to model observers.

Evaluation of image quality (IQ) in Computed Tomography (CT) is important to ensure that diagnostic questions are correctly answered, whilst keeping radiation dose to the patient as low as is reasonably possible. The assessment of individual aspects of IQ is already a key component of routine quality control of medical x-ray devices. These values together with standard dose indicators can be used to give rise to 'figures of merit' (FOM) to characterise the dose efficiency of the CT scanners operating in certain modes. The demand for clinically relevant IQ characterisation has naturally increased with the development of CT technology (detectors efficiency, image reconstruction and processing), resulting in the adaptation and evolution of assessment methods. The purpose of this review is to present the spectrum of various methods that have been used to characterise image quality in CT: from objective measurements of physical parameters to clinically task-based approaches (i.e. model observer (MO) approach) including pure human observer approach. When combined together with a dose indicator, a generalised dose efficiency index can be explored in a framework of system and patient dose optimisation. We will focus on the IQ methodologies that are required for dealing with standard reconstruction, but also for iterative reconstruction algorithms. With this concept the previously used FOM will be presented with a proposal to update them in order to make them relevant and up to date with technological progress. The MO that objectively assesses IQ for clinically relevant tasks represents the most promising method in terms of radiologist sensitivity performance and therefore of most relevance in the clinical environment.

Splat-based surface reconstruction from defect-laden point sets

We introduce a method for surface reconstruction from point sets that is able to cope with noise and outliers. First, a splat-based representation is computed from the point set. A robust local 3D RANSAC-based procedure is used to filter the point set for outliers, then a local jet surface - a low-degree surface approximation - is fitted to the inliers. Second, we extract the reconstructed surface in the form of a surface triangle mesh through Delaunay refinement. The Delaunay refinement meshing approach requires computing intersections between line segment queries and the surface to be meshed. In the present case, intersection queries are solved from the set of splats through a 1D RANSAC procedure

Plastic surgery in chest wall reconstruction: relevant aspects - case series

Objective: to discuss the participation of Plastic Surgery in the reconstruction of the chest wall, highlighting relevant aspects of interdisciplinaryness. Methods: we analyzed charts from 20 patients who underwent extensive resection of the thoracic integument, between 2000 and 2014, recording the indication of resection, the extent and depth of the raw areas, types of reconstructions performed and complications. Results: among the 20 patients, averaging 55 years old, five were males and 15 females. They resections were: one squamous cell carcinoma, two basal cell carcinomas, five chondrosarcomas and 12 breast tumors. The extent of the bloody areas ranged from 4x9 cm to 25x40 cm. In 12 patients the resection included the muscular plane. In the remaining eight, the tumor removal achieved a total wall thickness. For reconstruction we used: one muscular flap associated with skin grafting, nine flaps and ten regional fasciocutaneous flaps. Two patients undergoing reconstruction with fasciocutaneous flaps had partially suffering of the flap, solved with employment of a myocutaneous flap. The other patients displayed no complications with the techniques used, requiring only one surgery. Conclusion: the proper assessment of local tissues and flaps available for reconstruction, in addition to the successful integration of Plastic Surgery with the specialties involved in the treatment, enable extensive resections of the chest wall and reconstructions that provide patient recovery.

Finnish buyers’ perceptions of Indian textile and clothing suppliers: Country of origin in focus

Choosing the right supplier is crucial for long-term business prospects and profitability. Thus organizational buyers are naturally very interested in how they can select the right supplier for their needs. Likewise, suppliers are interested in knowing how their customers make purchasing decisions in order to effectively sell and market to them. From the point of view of the textile and clothing (T&C) industry, regulatory changes and increasing low-cost and globalization pressures have led to the rise of low-cost production locations India and China as the world’s largest T&C producers. This thesis will examine T&C trade between Finland and India specifically in the context of non-industrial T&C products. Its main research problem asks: what perceptions do Finnish T&C industry buyers hold of India and Indian suppliers? B2B buyers use various supplier selection models and criteria in making their purchase decisions. A significant amount of research has been done into supplier selection practices, and in the context of international trade, country of origin (COO) perceptions specifically have garnered much attention. This thesis uses a mixed methods approach (online questionnaire and in-depth interviews) to evaluate Finnish T&C buyers’ supplier selection criteria, COO perceptions of India and experiences of Indian suppliers. It was found that the most important supplier selection criteria used by Finnish T&C buyers are quality, reliability and cost. COO perceptions were not found to be influential in purchasing process. Indian T&C suppliers’ strengths were found to be low cost, flexibility and a history of traditional T&C expertise. Their weaknesses include product quality and unreliable delivery times. Overall, the main challenges that need to be overcome by Indian T&C companies are logistical difficulties and the cost vs. quality trade-off. Despite positive perceptions of India for cost, the overall value offered by Indian T&C products was perceived to be low due to poor quality. Unreliable delivery time experiences also affected buyer’s reliability perceptions of Indian suppliers. The main limiting factors of this thesis relate to the small sample size used in the research. This limits the generalizability of results and the ability to evaluate the reliability and validity of some of the research instruments.

Molecular epidemiology and extended-spectrum β-lactamases production of Klebsiella pneumoniae isolated from three dairy herds

The objectives of this study were to isolate Klebsiella pneumoniae from different sources in three dairy cattle herds, to use the pulsed-field gel electrophoresis (PFGE) to measure genotypic similarities between isolates within a dairy herd, to verify the production of extended-spectrum β-lactamases (ESBLs) by the double-disk synergy test (DDST), and to use the PCR to detect the main ESBLs subgroups genes. Three dairy farms were selected based on previous mastitis outbreaks caused by K. pneumoniae. Milk samples were collected from lactating cows and from the bulk tank. Swabs were performed in different locations, including milking parlors, waiting room, soil, animal's hind limbs and rectum. K. pneumoniae was isolated from 27 cases of intramammary infections (IMI) and from 41 swabs. For farm A isolates from IMI and bulk tank were considered of the same PGFE subtype. One isolate from a bulk tank, three from IMI cases and four from environmental samples were positive in the DDST test. All eight DDST positive isolates harbored the bla shv gene, one harbored the bla tem gene, and three harbored the bla ctx-m gene, including the bulk tank isolate. Our study confirms that ESBL producing bacteria is present in different locations in dairy farms, and may be responsible for IMI. The detection of ESBLs on dairy herds could be a major concern for both public and animal health.

Mathematical modeling of level of anaesthesia from EEG measurements

Problem of modeling of anaesthesia depth level is studied in this Master Thesis. It applies analysis of EEG signals with nonlinear dynamics theory and further classification of obtained values. The main stages of this study are the following: data preprocessing; calculation of optimal embedding parameters for phase space reconstruction; obtaining reconstructed phase portraits of each EEG signal; formation of the feature set to characterise obtained phase portraits; classification of four different anaesthesia levels basing on previously estimated features. Classification was performed with: Linear and quadratic Discriminant Analysis, k Nearest Neighbours method and online clustering. In addition, this work provides overview of existing approaches to anaesthesia depth monitoring, description of basic concepts of nonlinear dynamics theory used in this Master Thesis and comparative analysis of several different classification methods.

Developing sustainable value proposition: A case study from manufacturing industry

Increasing pressures to reduce costs, inprove productivity, and lower the environmental impact are forcing suppliers to present evidences of the monetary and societal value they create for the customers and society around. The extant academic literature on the practical activities related to topic is still sparse and this study addresses the gap by developing sustainable customer value proposition for Valmet’s recycled fibre line solution for the Chinese market. The research is based on literature review and single case study method. Theoretically the study is connected to the emerging literature of customer value and life cycle engineering, and to the research of sustainable development in the field of marketing. For exloiting empirical evidences, in-depth supplier interviews and customer survey were conducted. The results suggest that selling of recycled fibre line solution requires tangible and credible evidence of the value and utility which is delivered for the customer. In addition to the economic benefits also societal benefits should be included in the value proposition that are the focus of attention in China. Still, the role of discovered benefits may be contradictory until they are communicated to appropriate decision makers. Managerially the study contributes to the customer value management and quantification knowledge and practices in Valmet’s organization.