Organic fertilization of peach trees: implication on nitrogen availability, root growth and carbon distribution within plant

In the last years, sustainable horticulture has been increasing; however, to be successful this practice needs an efficient soil fertility management to maintain a high productivity and fruit quality standards. For this purpose composted organic materials from agri-food industry and municipal solid waste has been used as a source to replace chemical fertilizers and increase soil organic matter. To better understand the influence of compost application on soil fertility and plant growth, we carried out a study comparing organic and mineral nitrogen (N) fertilization in micro propagated plants, potted trees and commercial peach orchard with these aims: 1. evaluation of tree development, CO2 fixation and carbon partition to the different organs of two-years-old potted peach trees. 2. Determination of soil N concentration and nitrate-N effect on plant growth and root oxidative stress of micro propagated plant after increasing rates of N applications. 3. Assessment of soil chemical and biological fertility, tree growth and yield and fruit quality in a commercial orchard. The addition of compost at high rate was effective in increasing CO2 fixation, promoting root growth, shoot and fruit biomass. Furthermore, organic fertilizers influenced C partitioning, favoring C accumulation in roots, wood and fruits. The higher CO2 fixation was the result of a larger tree leaf area, rather than an increase in leaf photosynthetic efficiency, showing a stimulation of plant growth by application of compost. High concentrations of compost increased total soil N concentration, but were not effective in increasing nitrate-N soil concentration; in contrast mineral-N applications increased linearly soil nitrate-N, even at the lowest rate tested. Soil nitrate-N concentration influenced positively plant growth at low rate (60- 80 mg kg-1), whereas at high concentrations showed negative effects. In this trial, the decrease of root growth, as a response to excessive nitrate-N soil concentration, was not anticipated by root oxidative stress. Continuous annual applications of compost for 10 years enhanced soil organic matter content and total soil N concentration. Additionally, high rate of compost application (10 t ha-1 year-1) enhanced microbial biomass. On the other hand, different fertilizers management did not modify tree yield, but influenced fruit size and precocity index. The present data support the idea that organic fertilizers can be used successfully as a substitute of mineral fertilizers in fruit tree nutrient management, since they promote an increase of soil chemical and biological fertility, prevent excessive nitrate-N soil concentration, promote plant growth and potentially C sequestration into the soil.

Le aziende vitivinicole: da “machines à produire” a elementi di attrazione nel paesaggio. Proposte e criteri progettuali per l’efficienza funzionale e la qualità architettonica ed ambientale delle strutture ed infrastrutture della trasformazione enologica.

La ricerca ha per oggetto la messa a punto e applicazione di un approccio metaprogettuale finalizzato alla definizione di criteri di qualità architettonica e paesaggistica nella progettazione di aziende vitivinicole medio-piccole, che effettuano la trasformazione della materia prima, prevalentemente di propria produzione. L’analisi della filiera vitivinicola, della letteratura scientifica, della normativa di settore, di esempi di “architetture del vino eccellenti” hanno esplicitato come prevalentemente vengano indagate cantine industriali ed aspetti connessi con l'innovazione tecnologica delle attrezzature. Soluzioni costruttive e tecnologiche finalizzate alla qualità architettonica ed ambientale, attuali dinamiche riguardanti il turismo enogastronomico, nuove funzionalità aziendali, problematiche legate alla sostenibilità dell’intervento risultano ancora poco esplorate, specialmente con riferimento a piccole e medie aziende vitivinicole. Assunto a riferimento il territorio ed il sistema costruito del Nuovo Circondario Imolese (areale rappresentativo per vocazione ed espressione produttiva del comparto vitivinicolo emiliano-romagnolo) è stato identificato un campione di aziende con produzioni annue non superiori ai 5000 hl. Le analisi svolte sul campione hanno permesso di determinare: modalità di aggregazione funzionale degli spazi costruiti, relazioni esistenti con il paesaggio, aspetti distributivi e materico-costruttivi, dimensioni di massima dei locali funzionali alla produzione. Il caso studio relativo alla riqualificazione di un’azienda rappresentativa del comparto è stato utilizzato per la messa a punto e sperimentazione di criteri di progettazione guidati da valutazioni relative alle prestazioni energetiche, alla qualità architettonica e alla sostenibilità ambientale, economica e paesaggistica. L'analisi costi-benefici (pur non considerando le ricadute positive in termini di benessere degli occupanti ed il guadagno della collettività in termini di danni collegati all’inquinamento che vengono evitati in architetture progettate per garantire qualità ambientale interna ed efficienza energetica) ha esplicitato il ritorno in pochi anni dell’investimento proposto, nonostante gli ancora elevati costi di materiali di qualità e dei componenti per il corretto controllo climatico delle costruzioni.

Responsabilita' sociale d'impresa e abitudini alimentari: contributo di Coop nella creazione di valore per i cittadini, per il territorio e i prodotti tipici di qualità

I cambiamenti e le innovazioni sociali, che hanno caratterizzato il secolo scorso, hanno generato mutamenti significativi nella struttura dei consumi, legati in particolare a una maggiore consapevolezza dei consumatori e allo scoppio della crisi economica. Assume sempre maggiore importanza, all’interno delle politiche di brand management, il ruolo della Responsabilità Sociale d’Impresa, che spinge la Grande Distribuzione Organizzata a proporre prodotti con più alti standard qualitativi e di sicurezza. Il caso analizzato è quello della linea biologica ViviVerde Coop, la cui offerta di prodotti biologici a private label ha avuto un impatto molto positivo sul mercato. L’analisi dell’elasticità della curva di domanda di alcuni di questi prodotti nel periodo gennaio 2010-maggio 2012 rivela diversi valori positivi e maggiori di 1, indice del fatto che il prezzo non abbia avuto effetti negativi sulle vendite dei prodotti considerati. Tale evidenza risulta rilevante proprio in un periodo di profonda crisi economica che ha interessato, in modo significativo, anche i consumi alimentari.

Una panoramica sulle agenzie di traduzione: caratteristiche, tipologie e flussi di lavoro

Over the last decades the need for translation and interpreting services has increased thanks to globalization and to the progress made in the technology field. However, the organizations which provide these services, the so-called translation agencies or translation companies, are still underrated and, in some cases, virtually unknown to those people who do not belong to the translation market. The present work aims to answer all the most common questions about these companies by describing in as much detail as possible all their aspects, mechanisms, workflows and characteristics. Chapter one introduces translation agencies outlining, in the first place, some of their main definitions and classifications. Particular attention is also devoted to the translation market, to the main trade associations in the field, to the quality standards adopted and to the important role played by social media for the success of translation agencies. Chapter two starts with a theoretical introduction to the concept of “organization” and an examination of the main types of teams commonly adopted in companies, i.e. virtual and traditional. This introduction is then followed by an analysis of the typical workflows taking place in translation agencies, the main professionals involved (such as Project Managers, translators and reviewers) and their essential competences. Finally, chapter three presents a comparison between a traditional translation agency, i.e., Going Green Translations, characterized by a physical office and internal collaborators, and a more innovative translation agency, Qabiria, which on the contrary relies on a completely decentralized team. The interviews have allowed me to highlight similarities and differences as well as advantages and disadvantages of these agencies and their teams. The chapter concludes with a personal commentary on what has emerged from the comparison, and on the future of translation companies.

Assessing visual disturbance conditions on the Custer National Forest

Assessment of soil disturbance on the Custer National Forest was conducted during two summers to determine if the U.S. Forest Service Forest Soil Disturbance Monitoring Protocol (FSDMP) was able to distinguish post-harvest soil conditions in a chronological sequence of sites harvested using different ground-based logging systems. Results from the first year of sampling suggested that the FSDMP point sampling method may not be sensitive enough to measure post-harvest disturbance in stands with low levels of disturbance. Therefore, a revised random transect method was used during the second sampling season to determine the actual extent of soil disturbance in these cutting units. Using combined data collected from both summers I detected statistically significant differences (p < 0.05) in fine fraction bulk density measurements between FSDMP disturbance classes across all sites. Disturbance class 3 (most severe) had the highest reported bulk density, which suggest that the FSDMP visual class estimates are defined adequately allowing for correlations to be made between visual disturbance and actual soil physical characteristics. Forest site productivity can be defined by its ability to retain carbon and convert it to above- and belowground biomass. However, forest management activities that alter basic site characteristics have the potential to alter productivity. Soil compaction is one critical management impact that is important to understand; compaction has been shown to impede the root growth potential of plants, reduce water infiltration rates increasing erosion potential, and alter plant available water and nutrients, depending on soil texture. A new method to assess ground cover, erosion, and other soil disturbances was recently published by the U.S. Forest Service, as the Forest Soil Disturbance Protocol (FSDMP). The FSDMP allows soil scientists to visually assign a disturbance class estimate (0 – none, 1, 2, 3 – severe) from field measures of consistently defined soil disturbance indicators (erosion, fire, rutting, compaction, and platy/massive/puddled structure) in small circular (15 cm) plots to compare soil quality properties pre- and post- harvest condition. Using this protocol we were able to determine that ground-based timber harvesting activities occurring on the Custer National Forest are not reaching the 15% maximum threshold for detrimental soil disturbance outlined by the Region 1 Soil Quality Standards.

Simulating dioxane transport in a heterogeneous glacial aquifer system (Washtenaw County, Michigan) using publicly available models and data

The primary challenge in groundwater and contaminant transport modeling is obtaining the data needed for constructing, calibrating and testing the models. Large amounts of data are necessary for describing the hydrostratigraphy in areas with complex geology. Increasingly states are making spatial data available that can be used for input to groundwater flow models. The appropriateness of this data for large-scale flow systems has not been tested. This study focuses on modeling a plume of 1,4-dioxane in a heterogeneous aquifer system in Scio Township, Washtenaw County, Michigan. The analysis consisted of: (1) characterization of hydrogeology of the area and construction of a conceptual model based on publicly available spatial data, (2) development and calibration of a regional flow model for the site, (3) conversion of the regional model to a more highly resolved local model, (4) simulation of the dioxane plume, and (5) evaluation of the model's ability to simulate field data and estimation of the possible dioxane sources and subsequent migration until maximum concentrations are at or below the Michigan Department of Environmental Quality's residential cleanup standard for groundwater (85 ppb). MODFLOW-2000 and MT3D programs were utilized to simulate the groundwater flow and the development and movement of the 1, 4-dioxane plume, respectively. MODFLOW simulates transient groundwater flow in a quasi-3-dimensional sense, subject to a variety of boundary conditions that can simulate recharge, pumping, and surface-/groundwater interactions. MT3D simulates solute advection with groundwater flow (using the flow solution from MODFLOW), dispersion, source/sink mixing, and chemical reaction of contaminants. This modeling approach was successful at simulating the groundwater flows by calibrating recharge and hydraulic conductivities. The plume transport was adequately simulated using literature dispersivity and sorption coefficients, although the plume geometries were not well constrained.

An Ecological and Chemical Assessment of Copper Contaminated Streams in the Keweenaw Peninsula

The copper mining boom in Michigan's Upper Peninsula ended in the mid-1960s, but the historical mining still affects the region to this day. Earlier studies conducted in the Keweenaw have shown that trace metals in the sediments negatively affect benthic macroinvertebrate populations. However, because the concentrations of trace metals that are observed to be toxic often differ significantly between the laboratory and the environment, a better method for determining toxic levels of trace metals in the natural environment is desirable in order to establish surface water quality guidelines that effectively protect aquatic life. There were four research objectives for this research project. First, to determine if trace-level concentrations of copper can result in detectable ecological impacts even in the presence of high dissolved organic carbon (DOC). Second, to determine if there is a "safe" concentration of total dissolved copper below which there is little to no ecological impairment. Third, to establish which streams in the Keweenaw Peninsula have been most impacted by elevated levels of total dissolved copper. Fourth, to use this information to evaluate revisions to the water quality criterion for copper that were recently proposed by the Michigan Department of Environmental Quality (MDEQ). In order to collect water quality and macroinvertebrate data, two sampling surveys of approximately 50 streams were completed in the spring and summer of 2012. Our findings demonstrate that negative ecological impacts can be detected even in the presence of high concentrations of DOC. The majority of surveyed streams showed evidence of total dissolved copper concentrations that were elevated above background levels. Our findings suggest that there are detectable negative impacts below the current water quality standard for copper in many Keweenaw streams. The diversity of benthic macroinvertebrates and the number of species present has been reduced as a result of exposure to copper. Additionally, the multimetric approach used by MDEQ is unable to detect copper impairment in local streams due to the use of several insensitive metrics. The proposed changes to the copper criterion would increase the amount of total dissolved copper allowable despite the fact that approximately 25% of streams sampled have aquatic chemistries that would leave them vulnerable to high levels of copper ions.

Geochemistry and Stable Isotopes of Surface Water and Groundwater in the Continental Pit in Butte, Montana, USA

The Continental porphyry Cu‐Mo mine, located 2 km east of the famous Berkeley Pit lake of Butte, Montana, contains two small lakes that vary in size depending on mining activity. In contrast to the acidic Berkeley Pit lake, the Continental Pit waters have near-neutral pH and relatively low metal concentrations. The main reason is geological: whereas the Berkeley Pit mined highly‐altered granite rich in pyrite with no neutralizing potential, the Continental Pit is mining weakly‐altered granite with lower pyrite concentrations and up to 1‐2% hydrothermal calcite. The purpose of this study was to gather and interpret information that bears on the chemistry of surface water and groundwater in the active Continental Pit. Pre‐existing chemistry data from sampling of the Continental Pit were compiled from the Montana Bureau of Mines and Geology and Montana Department of Environmental Quality records. In addition, in March of 2013, new water samples were collected from the mine’s main dewatering well, the Sarsfield well, and a nearby acidic seep (Pavilion Seep) and analyzed for trace metals and several stable isotopes, including dD and d18O of water, d13C of dissolved inorganic carbon, and d34S of dissolved sulfate. In December 2013, several soil samples were collected from the shore of the frozen pit lake and surrounding area. The soil samples were analyzed using X‐ray diffraction to determine mineral content. Based on Visual Minteq modeling, water in the Continental Pit lake is near equilibrium with a number of carbonate, sulfate, and molybdate minerals, including calcite, dolomite, rhodochrosite (MnCO3), brochantite (CuSO4·3Cu(OH)2), malachite (Cu2CO3(OH)2), hydrozincite (Zn5(CO3)2(OH)6), gypsum, and powellite (CaMoO4). The fact that these minerals are close to equilibrium suggests that they are present on the weathered mine walls and/or in the sediment of the surface water ponds. X‐Ray Diffraction (XRD) analysis of the pond “beach” sample failed to show any discrete metal‐bearing phases. One of the soil samples collected higher in the mine, near an area of active weathering of chalcocite‐rich ore, contained over 50% chalcanthite (CuSO4·5H2O). This water‐soluble copper salt is easily dissolved in water, and is probably a major source of copper to the pond and underlying groundwater system. However, concentrations of copper in the latter are probably controlled by other, less‐soluble minerals, such as brochantite or malachite. Although the acidity of the Pavilion Seep is high (~ 11 meq/L), the flow is much less than the Sarsfield Well at the current time. Thus, the pH, major and minor element chemistry in the Continental Pit lakes are buffered by calcite and other carbonate minerals. For the Continental Pit waters to become acidic, the influx of acidic seepage (e.g., Pavilion Seep) would need to increase substantially over its present volume.

Produktentwicklung von Druckgussteilen

Die Produktentwicklung von Druckgussteilen kann flexibel, wirtschaftlich und schnell durch die Herstellung von RP-Unikaten und Metallabgüssen aus Keramikschalen realisiert werden. Dieser Weg eignet sich vor allem für komplexe Bauteile und macht eine Produkterprobung mit qualitativ deutlich verbesserter Aussagekraft trotz reduzierter Entwicklungskosten möglich. In Abgrenzung zum Sandguss, muss die Konstruktion der Bauteile nicht verändert werden. 
Durch eine gezielte Wärmebehandlung wird die Vergleichbarkeit der mechanischen Eigenschaften von Prototypen zu späteren Serienteilen möglich. Technisch sinnvolle Änderungen sind leicht und flexibel realisierbar, da werkzeuglos gefertigt wird. Für unerreichbare Hohlräume und Hinterschnitte kann in diesem Verfahren mit Keramikkernen als Einleger gearbeitet werden. Auch diese Kerne können werkzeuglos hergestellt werden. Ein Verzicht auf technisch Sinnvolles aus Kostengründen ist damit hinfällig.
In der Konstruktion ergeben sich neue Freiheitsgrade, so dass Ziele im Leichtbau, die Einsparung von Verbindungstechnik oder die erhöhte Materialeffizienz realisierbar werden. Die so entwickelten Bauteile sind insgesamt qualitativ hochwertiger und bilden die technischen Anforderungen bestmöglich ab. Damit kann die für die Erprobung benötigte Zahl der Prototypen verringert werden. 
Je komplexer die Geometrie der Bauteile, je stärker kommen die beschriebenen Effekte zum Tragen. Diese Aussage gilt für die Produktentwicklung und für Kleinserien, die herkömmlich zu teuer und zu schwer im Druckguss oder Schmiedeverfahren produziert werden

Adjudication-related processes are underreported and lack standardization in clinical trials of venous thromboembolism: a systematic review

OBJECTIVES Although the use of an adjudication committee (AC) for outcomes is recommended in randomized controlled trials, there are limited data on the process of adjudication. We therefore aimed to assess whether the reporting of the adjudication process in venous thromboembolism (VTE) trials meets existing quality standards and which characteristics of trials influence the use of an AC. STUDY DESIGN AND SETTING We systematically searched MEDLINE and the Cochrane Library from January 1, 2003, to June 1, 2012, for randomized controlled trials on VTE. We abstracted information about characteristics and quality of trials and reporting of adjudication processes. We used stepwise backward logistic regression model to identify trial characteristics independently associated with the use of an AC. RESULTS We included 161 trials. Of these, 68.9% (111 of 161) reported the use of an AC. Overall, 99.1% (110 of 111) of trials with an AC used independent or blinded ACs, 14.4% (16 of 111) reported how the adjudication decision was reached within the AC, and 4.5% (5 of 111) reported on whether the reliability of adjudication was assessed. In multivariate analyses, multicenter trials [odds ratio (OR), 8.6; 95% confidence interval (CI): 2.7, 27.8], use of a data safety-monitoring board (OR, 3.7; 95% CI: 1.2, 11.6), and VTE as the primary outcome (OR, 5.7; 95% CI: 1.7, 19.4) were associated with the use of an AC. Trials without random allocation concealment (OR, 0.3; 95% CI: 0.1, 0.8) and open-label trials (OR, 0.3; 95% CI: 0.1, 1.0) were less likely to report an AC. CONCLUSION Recommended processes of adjudication are underreported and lack standardization in VTE-related clinical trials. The use of an AC varies substantially by trial characteristics.

Education for specialization in prosthodontics in Switzerland and the role of EPA.

Advertisement for any dental treatment was rare in Switzerland. Then the use of digital media became popular, particularly in the field of implant- and esthetic-dentistry. In parallel to the dental schools of public universities, private universities and companies built up centers for continuing education that issue specialists diplomas and M.Sc. degrees. Prosthodontics itself is characterized by many sub-disciplines that incorporated their own associations. These also offer graduate training curricula which diminish the significance of specialization in prosthodontics. Specialized prosthodontists do not have a financial benefit in Switzerland where dentistry is not supported by any insurance. In other European countries funding of prosthodontic treatment depends on their healthcare systems. There are four specialties in Dentistry recognized by the European Union (EU). Specialization in prosthodontics was introduced in Sweden already in 1982 and today it is declared in about 20 European countries, while for others no recognized program exists. Thus there are great variations with more recognized specialists in former east European countries. In Switzerland the prosthodontic specialization curriculum was developed and guided by the Swiss Society for Reconstructive Dentistry, and only in 2001 it became fully acknowledged by the Federal Department of Health. The four Swiss Universities offer the 3-year program under the supervision of the society, while the government remains the executive body. In 2003 EPA tried to set up guidelines and quality standards for an EPA recognized specialization. In spite of these attempts and the Bologna Reform in Europe, it appears that the quality standards and the level of education still may differ significantly among European countries.

Early detection of lung cancer: a statement from an expert panel of the Swiss university hospitals on lung cancer screening.

The discussion about setting up a program for lung cancer screening was launched with the publication of the results of the National Lung Screening Trial, which suggested reduced mortality in high-risk subjects undergoing CT screening. However, important questions about the benefit-harm balance and the details of a screening program and its cost-effectiveness remain unanswered. A panel of specialists in chest radiology, respiratory medicine, epidemiology, and thoracic surgery representing all Swiss university hospitals prepared this joint statement following several meetings. The panel argues that premature and uncontrolled introduction of a lung cancer screening program may cause substantial harm that may remain undetected without rigorous quality control. This position paper focuses on the requirements of running such a program with the objective of harmonizing efforts across the involved specialties and institutions and defining quality standards. The underlying statement includes information on current evidence for a reduction in mortality with lung cancer screening and the potential epidemiologic implications of such a program in Switzerland. Furthermore, requirements for lung cancer screening centers are defined, and recommendations for both the CT technique and the algorithm for lung nodule assessment are provided. In addition, related issues such as patient management, registry, and funding are addressed. Based on the current state of the knowledge, the panel concludes that lung cancer screening in Switzerland should be undertaken exclusively within a national observational study in order to provide answers to several critical questions before considering broad population-based screening for lung cancer.

Information Technology Outsourcing: Towards Sustainable Business Value

This book attempts to synthesize research that contributes to a better understanding of how to reach sustainable business value through information systems (IS) outsourcing. Important topics in this realm are how IS outsourcing can contribute to innovation, how it can be dynamically governed, how to cope with its increasing complexity through multi-vendor arrangements, how service quality standards can be met, how corporate social responsibility can be upheld, and how to cope with increasing demands of internationalization and new sourcing models, such as crowdsourcing and platform-based cooperation. These issues are viewed from either the client or vendor perspective, or both. The book should be of interest to all academics and students in the fields of Information Systems, Management, and Organization as well as corporate executives and professionals who seek a more profound analysis and understanding of the underlying factors and mechanisms of outsourcing.