943 resultados para crown rot
Resumo:
Food safety today is conditiones by the implementation of new Tecnologies for food preservation based on mild treatments and mínimum process, Novel foods, severe restrictions in the toxicològic profile of chemical preservatives, And the drastic limitation /prohibition of antibiotics, and as a consequence, by the New emergint pathogens or by the increase of classical food-borne pathogens. Biopreservatives appear within this context with strong expectations, because thei are safe microorganisms of ten isolated from foods, chemical compounds of natural origin -antimicrobial peptides and proteins, botanical extracts, enzymes- and sintetic compounds based on natural structures, but less toxic and more eficients, like the amtimicrobial peptides. Among the microbial biopreservatives, lactic acid bacteria have shown great possibilities in the preservation of cured meat products, ready to eat fresh fruit and vegetables, as well as to decrease microbial spoilage in food by products before processing for valorization. Our laboratory has performed an extense survey of the microbiological quality of fresh fruit and vegetables, and of ready-to-eat products, and have detect low levels, but significant of Salmonella sp., E. coli and Listeria spp., including L.monocytogenes, in retail markets and Supermarkets of Catalonia. Due to this reason, we started a project consisting of Developing application of lactic acid bacteria (LAB) obtained from these products, as biopreservatives. LAB were abundant in ready-to-eat fresh fruits and vegetables, specially in germinated seeds. From these products we obtained strains of Leuconostoc, Lactobacillus and Weissella, producing bacteriocins and with a Significant activity of control of L.monocytogenes in fresh apple and cut salad. Ather strains were efective in the inhibition of fungal rot during postharvest caused by Penicillium expansum
Resumo:
Soybean cyst nematode (SCN) causes the greatest yield loss of any single pathogen of soybean in Iowa. An estimated 50 million bushels were lost in Iowa to SCN in 2004. Damage from SCN is not limited to yield loss from root feeding; SCN also makes other diseases like sudden death syndrome, iron deficiency chlorosis, Pythium, Phytophthora root and stem rot and brown stem rot worse. Once established in a field, SCN cannot be eradicated. However, the use of multiple management tactics can help minimize yield loss.
Resumo:
Summary: The merchant, the town and the crown : the burgher community of Turku and economic organization from the early Middle Ages to the 1570's
Resumo:
Pseudomonas fluorescens are rhizobacteria known for their biocontrol properties. Several antimicrobial functions are crucial for this process, and the experiments described here investigate the modulation of their expression during the plant-bacterium interaction. The role of a LuxR family regulator in interkingdom signaling has been investigated using genome-scale transcriptome analysis, gene promoter studies in vivo and in vitro, biocontrol assays, and response to plant compounds. PsoR, a LuxR solo or orphan regulator of P. fluorescens, was identified. PsoR is solubilized and activates a lux-box-containing promoter only in the presence of macerated plants, suggesting the presence of a plant molecule(s) that most likely binds to PsoR. Gene expression profiles revealed that genes involved in the inhibition of plant pathogens were affected by PsoR, including a chitinase gene, iron metabolism genes, and biosynthetic genes of antifungal compounds. 2,4-Diacetylphloroglucinol production is PsoR dependent both in vitro and in vivo. psoR mutants were significantly reduced for their ability to protect wheat plants from root rot, and damping-off caused by Pythium ultimum infection. PsoR most likely senses a molecule(s) in the plant and modulates expression of genes that have a role in biocontrol. PsoR and related proteins form a subfamily of LuxR family regulators in plant-associated bacteria.
Resumo:
PURPOSE: To implement and characterize a fluorine-19 ((19)F) magnetic resonance imaging (MRI) technique and to test the hypothesis that the (19)F MRI signal in steady state after intravenous injection of a perfluoro-15-crown-5 ether (PCE) emulsion may be exploited for angiography in a pre-clinical in vivo animal study. MATERIALS AND METHODS: In vitro at 9.4T, the detection limit of the PCE emulsion at a scan time of 10 min/slice was determined, after which the T(1) and T(2) of PCE in venous blood were measured. Permission from the local animal use committee was obtained for all animal experiments. 12 µl/g of PCE emulsion was intravenously injected in 11 mice. Gradient echo (1)H and (19)F images were obtained at identical anatomical levels. Signal-to-noise (SNR) and contrast-to-noise (CNR) ratios were determined for 33 vessels in both the (19)F and (1)H images, which was followed by vessel tracking to determine the vessel conspicuity for both modalities. RESULTS: In vitro, the detection limit was ∼400 µM, while the (19)F T(1) and T(2) were 1350±40 and 25±2 ms. The (19)F MR angiograms selectively visualized the vasculature (and the liver parenchyma over time) while precisely coregistering with the (1)H images. Due to the lower SNR of (19)F compared to (1)H (17±8 vs. 83±49, p<0.001), the (19)F CNR was also lower at 15±8 vs. 52±35 (p<0.001). Vessel tracking demonstrated a significantly higher vessel sharpness in the (19)F images (66±11 vs. 56±12, p = 0.002). CONCLUSION: (19)F magnetic resonance angiography of intravenously administered perfluorocarbon emulsions is feasible for a selective and exclusive visualization of the vasculature in vivo.
Resumo:
A integração lavoura-pecuária tem apresentado um avanço recente em áreas historicamente utilizadas com pecuária de corte extensiva no sul do Brasil. O inadequado manejo das pastagens de inverno associado ao uso da monocultura da soja no verão podem limitar o aporte de resíduos vegetais ao solo e reduzir os estoques de C orgânico do solo. O objetivo deste trabalho foi avaliar o impacto do aumento da freqüência de pastejo no inverno e de sistemas de culturas de verão no estoque de C orgânico total do solo (COT). O experimento, realizado por quatro anos sob sistema plantio direto, seguiu um delineamento de blocos ao acaso, em arranjo bifatorial 3x3, com quatro repetições. O fator A foi constituído por três intervalos de pastejos durante o inverno: sem pastejo (SP), pastejo a cada 28 dias (P28) e pastejo a cada 14 dias (P14). O fator B constou de três sistemas de culturas de verão: monocultura de soja (Mon-S), monocultura de milho (Mon-M) e rotação anual de soja e milho (Rot-S/M). Foram quantificadas as adições de C ao solo via resíduos vegetais e os estoques de COT do solo segundo os métodos de camada e massa equivalentes de solo. O aumento da freqüência de pastejo diminuiu o aporte de C oriundo das pastagens de inverno de 5,3 Mg ha-1 no tratamento SP, para 1,7 e 1,3 Mg ha-1 nos tratamentos P28 e P14, respectivamente. O milho foi a cultura que proporcionou o maior aporte de C ao solo, com uma média de 6,0 Mg ha-1, enquanto a soja adicionou apenas 2,2 Mg ha-1. Os estoques de C orgânico calculados com base em camadas equivalentes de solo foram superestimados nos tratamentos P14 e P28 e subestimados no tratamento SP em comparação aos resultados obtidos com base nas massas equivalentes de solo, que foram utilizados para comparação dos sistemas de manejo. Os estoques de C orgânico nas camadas de 0-0,025, 0,025-0,05 e 0,05-0,10 m foram linearmente relacionados à adição anual de C pelas culturas (pastagem + culturas anuais), sendo necessária a adição de 4,48 Mg ha-1 ano-1 para a manutenção do estoque original de C orgânico da camada de 0-0,10 m. A baixa adição de C ao solo pelos resíduos vegetais no tratamento P14 resultou numa emissão líquida estimada de C para a atmosfera (0,05 a 0,27 Mg ha-1 ano-1 ), enquanto o solo no tratamento SP atuou como um dreno de C atmosférico (0,19 a 0,30 Mg ha-1 ano-1). No tratamento P28, o comportamento do solo como fonte ou dreno de C dependeu do sistema de cultura de verão, tendo sido estimada uma emissão líquida de C do solo sob Mon-S (0,04 Mg ha-1 ano-1 ) e uma retenção líquida de C sob Mon-M (0,15 Mg ha-1 ano-1 ) e Rot-S/M (0,11 Mg ha-1 ano-1 ). O maior intervalo entre pastejos, durante o inverno, associado à utilização do milho no verão contribuiu para maiores adições de resíduos vegetais e acúmulo de C orgânico no solo.
Resumo:
The use of leaf total nitrogen concentration as an indicator for nutritional diagnosis has some limitations. The objective of this study was to determine the reliability of total N concentration as an indicator of N status for eucalyptus clones, and to compare it with alternative indicators. A greenhouse experiment was carried out in a randomized complete block design in a 2 × 6 factorial arrangement with plantlets of two eucalyptus clones (140 days old) and six levels of N in the nutrient solution. In addition, a field experiment was carried out in a completely randomized design in a 2 × 2 × 2 × 3 factorial arrangement, consisting of two seasons, two regions, two young clones (approximately two years old), and three positions of crown leaf sampling. The field areas (regions) had contrasting soil physical and chemical properties, and their soil contents for total N, NH+4-N, and NO−3-N were determined in five soil layers, up to a depth of 1.0 m. We evaluated the following indicators of plant N status in roots and leaves: contents of total N, NH+4-N, NO−3-N, and chlorophyll; N/P ratio; and chlorophyll meter readings on the leaves. Ammonium (root) and NO−3-N (root and leaf) efficiently predicted N requirements for eucalyptus plantlets in the greenhouse. Similarly, leaf N/P, chlorophyll values, and chlorophyll meter readings provided good results in the greenhouse. However, leaf N/P did not reflect the soil N status, and the use of the chlorophyll meter could not be generalized for different genotypes. Leaf total N concentration is not an ideal indicator, but it and the chlorophyll levels best represent the soil N status for young eucalyptus clones under field conditions.
Resumo:
Cova del Gegant is located near the city of Sitges (Barcelona, Spain). The cave is a small karst system which contains Upper Pleistocene archaeological and paleontological material (DauRa et al., 2005). The site was first excavated in 1954 and then in 1972 and 1974- (Viñas, 1972; Viñas & Villalta, 1975) and in 1985 and 1989 (maRtínez et al., 1985; moRa, 1988; maRtínez et al., 1990). Finally, in 2007, Grup de Recerca del Quaternari has restarted the archaeological research at Cova del Gegant (DauRa, 2008; DauRa et al., 2010). A human mandible was recovered during the first field season in 1954 and was recently published by DauRa et al. (2005). In the present study, we describe a new human tooth (left I2) that appeared, like the mandible, in a revision of the faunal material recovered from the site in 1974-1975. The specimen preserves the entire crown and the cervical two thirds of the root (Figure 1). The lack of the root apex makes it difficult to determine if the tooth was fully developed at the time of death. However, CT analysis reveals a pulp cavity that could be still open, suggesting root formation was incomplete. The specimen shows only slight dental wear corresponding to stage 2 of Molnar (1971 en Hillson, 1996). Morphologically, the crown shows slight shovelling and a lingual tubercle and appears similar to Neandertal incisors. Standard crown measurements (buccolingual diameter=7.7 mm; mesiodistal diameter= 7.3 mm) (Figure 2) suggest a fairly large tooth, particularly in the BL dimension, again resembling Neandertals in this regard. Discriminant analysis classified the Gegant incisor as Neandertal with a 99.8% posterior probability (Table 2). Association of this tooth with the previously described mandible is considered unlikely given the different ages at death estimated for each. Thus, there appear to be two individuals preserved in the sediments of the Gegant cave, one adult and one subadult (around 8-10 years old).
Resumo:
Pseudomonas fluorescens CHA0 produces several secondary metabolites, e.g., the antibiotics pyoluteorin (Plt) and 2,4-diacetylphloroglucinol (Phl), which are important for the suppression of root diseases caused by soil-borne fungal pathogens. A Tn5 insertion mutant of strain CHA0, CHA625, does not produce Phl, shows enhanced Plt production on malt agar, and has lost part of the ability to suppress black root rot in tobacco plants and take-all in wheat. We used a rapid, two-step cloning-out procedure for isolating the wild-type genes corresponding to those inactivated by the Tn5 insertion in strain CHA625. This cloning method should be widely applicable to bacterial genes tagged with Tn5. The region cloned from P. fluorescens contained three complete open reading frames. The deduced gene products, designated PqqFAB, showed extensive similarities to proteins involved in the biosynthesis of pyrroloquinoline quinone (PQQ) in Klebsiella pneumoniae, Acinetobacter calcoaceticus, and Methylobacterium extorquens. PQQ-negative mutants of strain CHA0 were constructed by gene replacement. They lacked glucose dehydrogenase activity, could not utilize ethanol as a carbon source, and showed a strongly enhanced production of Plt on malt agar. These effects were all reversed by complementation with pqq+ recombinant plasmids. The growth of a pqqF mutant on ethanol and normal Plt production were restored by the addition of 16 nM PQQ. However, the Phl- phenotype of strain CHA625 was due not to the pqq defect but presumably to a secondary mutation. In conclusion, a lack of PQQ markedly stimulates the production of Plt in P. fluorescens.
Resumo:
Purpose: The aim of this study was to evaluate the clinical fracture rate of crowns fabricated with the pressable, leucite-reinforced ceramic IPS Empress, and relate the results to the type of tooth restored. Materials and Methods: The database SCOPUS was searched for clinical studies involving full-coverage crowns made of IPS Empress. To assess the fracture rate of the crowns in relation to the type of restored tooth and study, Poisson regression analysis was used. Results: Seven clinical studies were identified involving 1,487 adhesively luted crowns (mean observation time: 4.5 +/- 1.7 years) and 81 crowns cemented with zinc-phosphate cement (mean observation time: 1.6 +/- 0.8 years). Fifty-seven of the adhesively luted crowns fractured (3.8%). The majority of fractures (62%) occurred between the third and sixth year after placement. There was no significant influence regarding the test center on fracture rate, but the restored tooth type played a significant role. The hazard rate (per year) for crowns was estimated to be 5 in every 1,000 crowns for incisors, 7 in every 1,000 crowns for premolars, 12 in every 1,000 crowns for canines, and 16 in every 1,000 crowns for molars. One molar crown in the zinc-phosphate group fractured after 1.2 years. Conclusion: Adhesively luted IPS Empress crowns showed a low fracture rate for incisors and premolars and a somewhat higher rate for molars and canines. The sample size of the conventionally luted crowns was too small and the observation period too short to draw meaningful conclusions. Int J Prosthodont 2010;23:129-133.
Resumo:
OBJECTIVE: To evaluate the clinical performance of glass-ceramic/zirconia crowns fabricated using intraoral digital impressions - a retrospective study with a three-year follow-up. METHODS: 70 consecutive patients with a total of 86 glass-ceramic/zirconia crowns were treated by a single clinician using standardized clinical and laboratory protocols. A complete digital workflow was adopted for the purpose except for the veneering procedure for the glass-ceramic crowns. Occlusal adjustments were made before the ceramic glazing procedure. Before cementation, all abutments where carefully cleaned with a 70% alcoholic solution and air dried. Cementation was performed using dual-curing, self-adhesive resin cement. Patients were re-examined after 12, 24 and 36 months, to assess crown chipping/fractures. RESULTS: After the three-year follow-up, none of the zirconia-based restoration was lost ("apparent" survival rate 100%) otherwise, the chipping rate of the veneering material increased from 9.3% after 12 months, to 14% after 24 months to 30.2% after 36 months. As a consequence, the "real" success rate after 3 years was 69.8%. CONCLUSIONS: After 3 years the success rate of zirconia-based crowns was 69.8%, while the incidence of the chipping was 30.2%. Assuming an exponential increase in chipping rate between 12 and 36 months it can be argued that, among others, the fatigue-mechanism could be advocated as the main factor for the failure of glass-ceramic veneered zirconia especially after 24 months.
Resumo:
Freezing and thawing action induces damage to unbound gravel roads in Iowa resulting in maintenance costs for secondary road departments. Some approaches currently used by County Engineers to deal with this problem include temporarily spreading rock on the affected areas, lowering or improving drainage ditches, tiling, bridging the area with stone and geosynthetic covered by a top course of aggregate or gravel, coring boreholes and filling them with calcium chloride to melt lenses and provide drainage, and re-grading the crown to a slope of 4% to 6% to maximize spring drainage. However, most of these maintenance solutions are aimed at dealing with conditions after they occur. This study was tasked with identifying alternative approaches in the literature to mitigate the problem. An annotated bibliographic record of literature on the topic of frost-heave and thaw-weakening of gravel roads was generated and organized by topic, and all documents were assessed in terms of a suitable rating for mitigating the problem in Iowa. Over 300 technical articles were collected and selected down to about 150 relevant articles for a full assessment. The documents collected have been organized in an electronic database, which can be used as a tool by practitioners to search for information regarding the various repair and mitigation solutions, measurement technologies, and experiences that have been documented by selected domestic and international researchers and practitioners. Out of the 150+ articles, 71 articles were ranked as highly applicable to conditions in Iowa. The primary mitigation methods identified in this study included chemical and mechanical stabilization; scarification, blending, and recompaction; removal and replacement; separation, and reinforcement; geogrids and cellular confinement; drainage control and capillary barriers, and use of alternative materials. It is recommended that demonstration research projects be established to examine a range of construction methods and materials for treating granular surfaced roadways to mitigate frost-heave and thaw-weakening problems. Preliminary frost-susceptibility test results from ASTM D5916 are included for a range of Iowa materials.
Resumo:
Field studies were established in Zavalla and Oliveros, Argentina, during four years in order to optimize Johnsongrass (Sorghum halepense (L.) Pers.) chemical control by means of the thermal calendar model in comparison with other criteria (weed height or days after sowing). The effect of three application dates of postemergence herbicides was determined by visual control, density of tillers originated from rhizome bud regrowth, and from crown and shoot bud regrowth, and soybean yield. Following the thermal calendar model criterion, applications during the second date afforded the best control. Weed height for the first date showed little variability between experiments but was highly variable in the second and third application dates, achieving in some cases values greater than 120 cm. For all years, no significant differences were detected for crop yield between the first and second application dates, and yields were always lower for the third date. The greatest rhizome bud regrowth was observed for the earliest application date and the highest crown and shoot bud regrowth was determined for the last application date. Parameters associated with control efficiency showed the best behaviour for the second date. However, plant height at this moment may interfere with herbicide application and the variability exhibited by this parameter highlights the risk of determining control timing using only one decision criterion.
Resumo:
ABSTRACT Application of salicylic acid induces systemic acquired resistance in tobacco. pchA and pchB, which encode for the biosynthesis of salicylic acid in Pseudomonas aeruginosa, were cloned into two expression vectors, and these constructs were introduced into two root-colonizing strains of P. fluorescens. Introduction of pchBA into strain P3, which does not produce salicylic acid, rendered this strain capable of salicylic acid production in vitro and significantly improved its ability to induce systemic resistance in tobacco against tobacco necrosis virus. Strain CHA0 is a well-described biocontrol agent that naturally produces salicylic acid under conditions of iron limitation. Introduction of pchBA into CHA0 increased the production of salicylic acid in vitro and in the rhizosphere of tobacco, but did not improve the ability of CHA0 to induce systemic resistance in tobacco. In addition, these genes did not improve significantly the capacity of strains P3 and CHA0 to suppress black root rot of tobacco in a gnotobiotic system.