Análise faciológica e estratigráfica das formações Taciba (parte superior) e Rio Bonito (membro Triunfo) em poços testemunhados da área de Monte Alegre (PR)

The Triunfo Member, from Rio Bonito Formation, is a potential reservoir for hydrocarbons and water, and contains coal deposits in the northern state of Paraná. On the eastern edge of the Paraná Basin, the Triunfo Member has two depocenters in Santa Catarina and offlap to the North of Paraná; here in two adjacent areas characterized his final lapout. These areas have a number of wells core/logged with the initials MA and NF, Monte Alegre and Figueira North, which were drilled by the Companhia de Pesquisa e Recursos Minerais (CPRM), in order to research for coal in the Rio Bonito Formation. In this study, three wells in the MA area, and they were MA-4, MA-6 and MA-7 was subjected to vertical facies analysis (1D), from the description of wells and processing of data, so that later it was possible to chronocorrelate thereof, together with MA-5 well, through cycles facies (2D). This is a thesis which has never been developed in these wells mentioned above, it was possible to observe the development of part of the Member Taciba (top) and the Member Triunfo as a whole, can be determined three cycles facies to the latter, as well as their depositional environments. Finally, the chronocorrelate showed that there is a tabular architecture between the wells studied, this occurred because of subsidence uniform

A internacionalização do setor siderúrgico via fusões e aquisições: um estudo sobre a competitividade do setor no Brasil

A siderurgia é um importante elo na cadeia siderúrgica, unindo tanto setores que estão atrás dela, mineração e carvão, como os que seguem a sua frente, setores da construção civil, máquinas e ferramentas, automobilístico e até mesmo setores de maior intensidade tecnológica como o da aeronáutica. Esta monografia tem por objetivo estudar a internacionalização que o setor siderúrgico brasileiro sofreu durante a última década analisando tanto os fluxos de fusões e aquisições de empresas brasileiras as quais compram ativos no exterior como também de indústrias siderúrgicas estrangeiras que adquirem ativos produtivos no Brasil. Deseja-se estabelecer se as Fusões e Aquisições foram capazes de trazer maior competitividade para as empresas nacionais e avaliar o impacto que a indústria brasileira sofre com a entrada de siderúrgicas estrangeiras. Para tanto, foram feitas análises qualitativas buscando analisar quais as estratégias de internacionalização das empresas e relacionar as fusões e aquisições feitas de acordo com as estratégias traçadas. Em termos quantitativos tentou-se verificar por meio do market-share mensurado em termos mundiais de venda se as operações realizadas pelas empresas foram capazes de elevá-las a patamares competitivos superiores

Litofácies e relações estratigráficas da formação Aquidauana no nordeste da Bacia do Paraná - São Sebastião do Paraíso (MG)

The Aquidauana Formation is characterized by sandstones of variable granulation, mudstones and diamectites abundant in clay, typical colors like brick red (vermelho tijolo) of glacial, fluvial and lacustrine origin. It’s chronostratigraphic equivalent to the Itarará group from the Neo Carboniferous age, that under the exploratory view, such units represent important intervals in the basin, occurring together with them minerals as well as energy resources as petroleum, underground water and coal – what requires a great paleogeography and stratigraphy knowledge for its exploration. By gathering information from the columnar sections of the area, it was possible to characterize the sedimentary facies, the stacking pattern as well as the association. It was also made an attempt of stratigraphic correlation, which showed great difficulties since glacial environments present a great lateral discontinuity of the facies besides the complex relationship process of formation. As a result, it was obtained 8 sedimentary facies, the lateral and vertical relations and genesis process. It is proposed that the sedimentary environment in the study area is the fluvio glacial, characterized by alluvial systems formed by defrosted water which transport the sediments that are deposited in plains in front of the glacier (distal outwash). Petrographic thin section analysis showed that the transportation process was ineffective. The grains present punctual to lobular contacts, characterizing good porosity and permeability to the rock, varying these qualities according to more or less existence of matrix. The presence of Iron Oxide deposited between the recrystallization border and feldspathic mineral indicates that this rock has possibly presented a primary rubefaction, intensified by alkaline fluid percolation

Avaliação da influência do substrato utilizado na qualidade e quantidade das parcelas de água escoada, percolada e armazenada em três estruturas experimentais de telhado verde extensino

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Biosusceptometria de corrente alternada para avaliação do trânsito gastrintestinal de alimentos líquidos em ratos

The gastrointestinal tract is the main route of nutrients absorption and drugs delivery. Is important to know the parameters related to the tract, like gastric emptying and gastrointestinal transit, in order to better understand the behavior of different kind of meals or drugs passing through the GIT. Many techniques are used to study these parameters, such as manometry, scintigraphy, phenol red, activated charcoal and carbon-13 reading. However, these methods use radiation, are invasive and require animal sacrifice. As an alternative proposal, the Alternate Current Biosusceptometry (ACB), a magnetic technique, has proved to be effective for these studies with small animals, in a noninvasive way, low cost, radiation free and avoiding the animal death. Associating the ACB to magnetic micro or nanoparticles used as tracers, it is possible to observe the meal behavior inside of the GIT. Focusing meanly on liquid meals digestion, this paper had the objective to evaluate the efficiency of the ACB technique in gastric emptying and gastrointestinal transit evaluation of liquid meals in rats. To perform the experiments, magnetic nanoparticles (ferrite, MgFe2O4) were used on a 1,5 ml solution introduced by gavage on similar weight and age rats. The sensor made by 2 pairs of coils, capable of generating and detecting magnetic fields, creates a field on the interest place and when this field is in contact with the marked meal, it changes, resulting on a variation of the measured voltage. The voltage variation is analyzed and is obtained a particle concentration on the interest region. The results showed that is possible to apply the ACB technique on the GIT evaluation of liquid particles digestion, gastric emptying and meal cecum arrival time curves were obtained and from that, is possible to observe a pattern of gastrointestinal transit. Both mean process time values were acquired, proving the technique capability of ...

Simulação de ciclo combinado utilizando software comercial

In Brazil, The power generation has always depended on the rivers, in other words, there are moments that the power generation can vary, which can cause variations in energy supply and even blackout according to the level of water in the reservoirs of the hydroelectric plants. For this reason, many options has been studied, like our example, which is about a combined cycle power plant in Canas. The use of combined cycle is interesting from the point o view of energy, because its efficiency is between 50 and 60%, and from the point of view of environment, because it can burn natural gas, which is cleaner than coal, it reduces the emission of gases that influence on the greenhouse effect. This work aims to perform a technical analysis of a case study of a power plant proposed to be built in Canas by the AES/AES Tietê Group. For the analysis will be used the commercial software GateCycle 6.0.0 from GE, this software has the power of simulating power generation cycles (nuclear, combined, etc.). The energy department of UNESP has the license, which makes possible the academic use of this tool. Two combined cycles were simulated, one using one pressure level HRSG, and another one closer to the real power plant, which is a combined cycle with a three pressure level HRSG. The results were close to expected, for the combined cycle with one pressure HRSG the power was 513,9 MW and a efficiency of 53,27%, in the case with the three pressure level HRSG the power was 517,1 MW and a efficiency of 53,5%. We conclude that the software requires that the user must have the knowledge about the subjects involved in the use of GateCycle in problems resolutions

Estudo sobre desruptores endócrinos em sistemas aquáticos: detecção e perspectivas de tratamento das águas do Rio Aporé-MS/GO, utilizando-se adsorventes sólidos

Pós-graduação em Ciência dos Materiais - FEIS

Uso e conservação de plantas medicinais nativas por comunidades quilombolas no município de Alcântara, Maranhão

Pós-graduação em Agronomia (Horticultura) - FCA

Desenvolvimento, implantação e avaliação do desempenho de biorreator anaeróbico de leito fluidizado e leito fixo com filtros biológicos em materiais diversos

This study aimed to develop, implement and evaluate the performance of a new type of bioreactor for anaerobic treatment of wastewater using different filling materials like trickling filters post-reactor. This bioreactor has mixed characteristics of the UASB reactors and horizontal flow from the point of view of removal of BOD (Biochemical Oxygen Demand) ssed (settled solids), TS (Total Solids), SS (Suspended Solid), SD (Dissolved Solids) and turbidity. The experimental model consists of a bioreactor with a volume of 12 m³, 2/3 filled by fluidized bed and 1/3 for fixed. The fluidized bed is made of polystyrene plates used as a system percolation and compartmentalized trickling filters, where each compartment was filled with a support medium with different characteristics (gravel number 4, plastic rings of polystyrene, PET and HDPE) . In addition, the output of a filter system was installed three entries filled with activated carbon. The bioreactor was installed in private residence in the city of Igarapava-SP (20° 02'40.18"S and 47° 45'01.36" W). The system was highly efficient as the removal of organic contaminant load 92% on average reducing the BOD, a significant result when compared to other anaerobic systems. For the other parameters, the mean reduction was 96% for turbidity, 99% ssed, 67.5% ST, 57% SD and 88% of SS. As for its operation the system was capable of operating in continuous flow without the need for maintenance during the entire period of evaluation and without energy, as it operates taking advantage of the natural slope of the terrain where it is installed. The environmental impacts were minimized due to the preservation of local vegetation allowing the ecosystem to remain unchanged beyond the prototype was completely sealed preventing exhalation of odors and therefore not causing inconvenience to neighboring populations. Given these facts it was concluded that the prototype is shown to be highly feasible deployed as a new alternative for treatment of sewage in rural and urban settings (individual homes, condos, farms, ranches, etc.) Due to ease of design and operability, and sustainability at all stages of execution.

A Vale em Moçambique: uma etnografia das relações entre brasileiros e moçambicanos no cotidiano dos megaprojetos

Pós-graduação em Ciências Sociais - FCLAR

Utilização de redes neurais artificiais aplicadas na discriminação de padrões de doenças florestais

Pós-graduação em Ciência Florestal - FCA

Exploratory study of electromyographic behavior of the vastus medialis and vastus lateralis at neuromuscular fatigue onset

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Estudo da utilização de serragem de madeira como adsorvente para o tratamento de efluentes têxteis

The Brazilian textile industry has been a highlight in the global economy. Connected with this high economic performance there is the water consumption and the generation of great volumes of wastewater which present high concentrations of dyes and chemical substances. One of the main techniques used in the treatment of textile effluents is adsorption, which has the activated carbon as the main adsorbent. Recently, studies have been developed to find alternative materials to activated carbon and exhibiting good adsorption capacity of dyes. The aim of this work is to study the potential of sawdust as adsorbent of low cost to remove the dye Direct Green 26. The results of this type of dye removal were obtained through the study of adsorption isotherms obtained by spectrophotometry in the UV-visible region analyzed by the Langmuir model. Finally, a comparison was made of these results with those of other adsorbents. Results showed that the average removal of dye, using sawdust, was 78.8% for an initial concentration of 500mg / L and the maximum adsorption capacity of 119mg / g. These results demonstrate the great potential of sawdust as an adsorbent for the dye Direct Green 26.

A aplicação da abordagem do Tecnógeno na identificação e classificação dos terrenos e depósitos tecnogênicos no ambiente urbano de Guarapuava-PR

Pós-graduação em Geografia - FCT

Produção de etanol utilizando cascas de banana e de laranja por co-fermentação de Zymomonas mobilis e Pichia stipitis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)