957 resultados para Wood sculpture, Italian


Relevância:

20.00% 20.00%

Publicador:

Resumo:

The pulp- and paper production is a very energy intensive industry sector. Both Sweden and the U.S. are major pulpandpaper producers. This report examines the energy and the CO2-emission connected with the pulp- and paperindustry for the two countries from a lifecycle perspective.New technologies make it possible to increase the electricity production in the integrated pulp- andpaper mill through black liquor gasification and a combined cycle (BLGCC). That way, the mill canproduce excess electricity, which can be sold and replace electricity produced in power plants. In thisprocess the by-products that are formed at the pulp-making process is used as fuel to produce electricity.In pulp- and paper mills today the technology for generating energy from the by-product in aTomlinson boiler is not as efficient as it could be compared to the BLGCC technology. Scenarios havebeen designed to investigate the results from using the BLGCC technique using a life cycle analysis.Two scenarios are being represented by a 1994 mill in the U.S. and a 1994 mill in Sweden.The scenariosare based on the average energy intensity of pulp- and paper mills as operating in 1994 in the U.S.and Sweden respectively. The two other scenarios are constituted by a »reference mill« in the U.S. andSweden using state-of-the-art technology. We investigate the impact of varying recycling rates and totalenergy use and CO2-emissions from the production of printing and writing paper. To economize withthe wood and that way save trees, we can use the trees that are replaced by recycling in a biomassgasification combined cycle (BIGCC) to produce electricity in a power station. This produces extra electricitywith a lower CO2 intensity than electricity generated by, for example, coal-fired power plants.The lifecycle analysis in this thesis also includes the use of waste treatment in the paper lifecycle. Both Sweden and theU.S. are countries that recycle paper. Still there is a lot of paper waste, this paper is a part of the countries municipalsolid waste (MSW). A lot of the MSW is landfilled, but parts of it are incinerated to extract electricity. The thesis hasdesigned special scenarios for the use of MSW in the lifecycle analysis.This report is studying and comparing two different countries and two different efficiencies on theBLGCC in four different scenarios. This gives a wide survey and points to essential parameters to specificallyreflect on, when making assumptions in a lifecycle analysis. The report shows that there arethree key parameters that have to be carefully considered when making a lifecycle analysis of wood inan energy and CO2-emission perspective in the pulp- and paper mill in the U.S. and in Sweden. First,there is the energy efficiency in the pulp- and paper mill, then the efficiency of the BLGCC and last theCO2 intensity of the electricity displaced by BIGCC or BLGCC generatedelectricity. It also show that with the current technology that we havetoday, it is possible to produce CO2 free paper with a waste paper amountup to 30%. The thesis discusses the system boundaries and the assumptions.Further and more detailed research, including amongst others thesystem boundaries and forestry, is recommended for more specificanswers.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Variation in wood properties for Picea abies trees and logs of different dimensions has been studied at two sites in southern Sweden of different site quality class. Trees have been classified as dominant or sub-dominant, according to their height. Log and board grades were classified and strength grade of boards, basic density and annual ring width measured. A similar study made on four northern sites was used as reference material.Sub-dominant trees were of superior quality in comparison to dominant trees, when classified by log and board grades or strength grading. Differences were accentuated for the second log where the sub-dominant trees had superior strength and low amount of boards with coarse branches. The results correspond well to those from the northern region, Jämtland. The classifica¬tion of boards as well as bending strength indicated superior properties on timber from northern sites even though the basic density was similar.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This report describes a method how to perform measurements on boilers and stoves and how to identify parameters from the measurements for the boiler/stove-model TRNSYS Type 210. The model can be used for detailed annual system simulations using TRNSYS. Experience from measurements on three different pellet stoves and four boilers were used to develop this methodology. Recommendations for the set up of measurements are given and the re-quired combustion theory for the data evaluation and data preparation are given. The data evalua-tion showed that the uncertainties are quite large for the measured flue gas flow rate and for boilers and stoves with high fraction of energy going to the water jacket also the calculated heat rate to the room may have large uncertainties. A methodology for the parameter identification process and identified parameters for two different stoves and three boilers are given. Finally the identified models are compared with measured data showing that the model generally agreed well with meas-ured data during both stationary and dynamic conditions.

Relevância:

20.00% 20.00%

Publicador:

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Emissions from residential combustion appliances vary significantly depending on the firing behaviours and combustion conditions, in addition to combustion technologies and fuel quality. Although wood pellet combustion in residential heating boilers is efficient, the combustion conditions during start-up and stop phases are not optimal and produce significantly high emissions such as carbon monoxide and hydrocarbon from incomplete combustion. The emissions from the start-up and stop phases of the pellet boilers are not fully taken into account in test methods for ecolabels which primarily focus on emissions during operation on full load and part load. The objective of the thesis is to investigate the emission characteristics during realistic operation of residential wood pellet boilers in order to identify when the major part of the annual emissions occur. Emissions from four residential wood pellet boilers were measured and characterized for three operating phases (start-up, steady and stop). Emissions from realistic operation of combined solar and wood pellet heating systems was continuously measured to investigate the influence of start-up and stop phases on total annual emissions. Measured emission data from the pellet devices were used to build an emission model to predict the annual emission factors from the dynamic operation of the heating system using the simulation software TRNSYS. Start-up emissions are found to vary with ignition type, supply of air and fuel, and time to complete the phase. Stop emissions are influenced by fan operation characteristics and the cleaning routine. Start-up and stop phases under realistic operation conditions contribute 80 – 95% of annual carbon monoxide (CO) emission, 60 – 90% total hydrocarbon (TOC), 10 – 20% of nitrogen oxides (NO), and 30 – 40% particles emissions. Annual emission factors from realistic operation of tested residential heating system with a top fed wood pelt boiler can be between 190 and 400 mg/MJ for the CO emissions, between 60 and 95 mg/MJ for the NO, between 6 and 25 mg/MJ for the TOC, between 30 and 116 mg/MJ for the particulate matter and between 2x10-13 /MJ and 4x10-13 /MJ for the number of particles. If the boiler has the cleaning sequence with compressed air such as in boiler B2, annual CO emission factor can be up to 550 mg/MJ. Average CO, TOC and particles emissions under realistic annual condition were greater than the limits values of two eco labels. These results highlight the importance of start-up and stop phases in annual emission factors (especially CO and TOC). Since a large or dominating part of the annual emissions in real operation arise from the start-up and stop sequences, test methods required by the ecolabels should take these emissions into account. In this way it will encourage the boiler manufacturers to minimize annual emissions. The annual emissions of residential pellet heating system can be reduced by optimizing the number of start-ups of the pellet boiler. It is possible to reduce up to 85% of the number of start-ups by optimizing the system design and its controller such as switching of the boiler pump after it stops, using two temperature sensors for boiler ON/OFF control, optimizing of the positions of the connections to the storage tank, increasing the mixing valve temperature in the boiler circuit and decreasing the pump flow rate. For 85 % reduction of start-ups, 75 % of CO and TOC emission factors were reduced while 13% increase in NO and 15 % increase in particle emissions was observed.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The aim in this chapter is to develop a deeper understanding about the informal Björling 'School' in Sweden. Contextually the example is related to the micro history of opera education contributing to the macro perspective illuminating a provincial example of the concept of domestic opera schooling. The specific focus was on Karl David Björling (1873-1926), the teaching parent of the Swedish tenor Jussi Björling (1911-1960) and his brothers Gösta and Olle.   The Björling family model of opera schooling belongs to the classical canon of domestic home education which was common during the epoch. The phenomenon is also within the field of opera singing an important reference to the historical context of the Nordic opera history of vocal education.   The uniqueness concerning the Björling School seems to be the rigorous and exceptionally early training. David Björling’s pedagogy was rooted in earlier German theories of musical upbringing. It's clear from his results that he was familiar with the neo-humanistic ideal on which reformed music education was based. Of a specific interest is the term Gesang als Unterricht as a concept for developing childrens musical and memorising capacities.   Conceptually the roots of the Björling model are in the eighteenth-century Romantic view of prodigies and their abilities. The extensive touring is connected to the promotion of wonder-children, and David Björling’s educational style to the conservative Master-pupil tradition.   David Björling's vocal ideal was a part of the contemporary debate about “The decadence of the singing art”, and seems to have its roots in an older Italian tradition. There are recurring similarities between his educational methods and the didactic principles of the Lamperti School: Enjoying a revival around the late 1800s and early 1900s, it has been called the natural or the national school. Nevertheless, through authentic experiences and gramophone recordings the Italian tenor Enrico Caruso became David Björling’s pedagogical role model.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The exploration of the idea of the horse is a very complex and open quest. Primarily it entails some conception of what the idea of the horse is. In choosing to title the project as such, I was attempting to indicate that what was of major interest to me was the representation of those qualities of the horse which are abstract and intangible as well as the physical qualities of the horse. Because of this interest, much of my work is concerned with movement, gesture, and the effects of structure, or lack thereof, on movement and gesture.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

My project as a Senior Scholar has been the study of the human figure through drawing and sculpture. I have worked directly from the model in order to understand the form and structure of the human body. The result of this concentrated study has been a sharpened sense of vision and an increased confidence in the use of materials for both two and three-dimensional representation.

Relevância:

20.00% 20.00%

Publicador:

Relevância:

20.00% 20.00%

Publicador:

Relevância:

20.00% 20.00%

Publicador:

Relevância:

20.00% 20.00%

Publicador:

Resumo:

O Brasil se tornou nos últimos anos uma importante economia no cenário global. O país sempre foi visto basicamente como um exportador de commodities; no entanto, devido ao crescimento de investimentos e ao desenvolvimento de diversos setores econômicos, essa imagem mudou e está em processo de reconstrução. As empresas para poderem se diferenciarem e ganharem competitividade, precisam entender profundamente como consumidores percebem e avaliam os produtos brasileiros atualmente. É de extrema importância para o Brasil entender o potencial competitivo para posicionar-se corretamente contra as nações desenvolvidas e altamente industrializadas, bem como contra as gigantes economias emergentes como Rússia, China e Índia. Este estudo explora como um grupo de respondentes italianos avaliam a categoria de cosméticos brasileiros. Foi conduzida uma pesquisa exploratória com o objetivo de identificar dentre quarto categorias diferentes de produtos qual seria analisada em detalhe posteriormente por meio de entrevistas em profundidade. Das 4 categorias diferentes de produtos (vestuário, cosméticos, frutas frescas e carnes) foi selecionada a categoria cosméticos que obteve a menor avaliação geral no estudo exploratório. Após a escolha da categoria a ser analisada, uma pesquisa qualitativa com 7 entrevistas em profundidade com consumidores italianos residentes no Brasil foram realizadas. Das pesquisas realizadas são obtidas as percepções de um grupo de consumidores sobre os atributos e associações psicológicas sobre a categoria de cosméticos brasileiros. A análise será conduzida utilizando 3 componentes para explicar a atitude de consumo: a cognitiva, a conativa e a emocional. Deste modo, os resultados e conclusões são apresentados e explorados. Ademais, um mapa psicológico das atitudes sobre a categoria analisada perante o público estudado será desenvolvido, com o objetivo de pontuar suas forças e fraquezas. Desta análise final será possível ter uma visão ampla das características, bem como dos pontos críticos que precisam ser melhorados no futuro para que o Brasil seja uma nação competitiva na indústria de cosméticos e também algumas questões que podem ser estendidas a outros setores da economia brasileira.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Este estudo tem como objetivo desenvolver uma análise comparativa do potencial de internacionalização na Rússia e no Brasil para as PME italianas que operam na indústria da moda. Depois de apresentar ao leitor as principais áreas cobertas, tais como, o contexto, a metodologia e revisão da literatura, é fornecido um panorama macroeconômico das áreas geográficas composto, englobando um estudo específico sobre o estado atual da economia e da demanda para os bens italianos. O estudo, introduzindo o leitor na indústria de moda italiana, suas principais características e o desempenho atual, já evidencia a busca pela internacionalização. As conclusões decorrentes das análises macroeconômicas funcionam como introdução à visão geral da indústria de moda italiana, uma indústria que representa, fortemente, o "Made in Italy" no exterior. A breve análise da história desta indústria, principais características e situação atual irão, então, sugerir que a internacionalização é o caminho mais viável às PME, para se recuperarem dos anos turbulentos da crise. Entre o vasto conjunto de opções geográficas que as PME têm para abraçar internacionalização, este estudo tem como objetivo fornecer duas análises sobre a indústria da moda: o mercado russo e o brasileiro. A análise, com base no quadro de capacidade de ‘resposta internacional’ proposto por Bartlet e Ghoshal (1989), apresenta os resultados de um conjunto de pesquisas e entrevistas realizadas no Brasil, na Itália e na Rússia, sob a forma de uma análise comparativa dos dois mercados-alvo. A análise evidenciará os drivers de mercado, custo, competitividade e legislação que justificam o processo de internacionalização em ambos os mercados. Os resultados levam à conclusão e às recomendações que os dois mercados representam duas oportunidades muito diferentes para as PME da indústria da moda italiana.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Esta tese de mestrado tem por intenção entender quais são as mais importantes diferenças culturais para os expatriados Italianos que trabalham no Brasil e aprender as implicações práticas para o ambiente de trabalho. O método utilizado foi qualitativo, com 23 entrevistas em profundidade com expatriados italianos de nível médio ate top management, com experiência de trabalho no Brasil. Os resultados indicam que os expatriados Italianos experimentam dificuldades com as diferenças em termos de comunicação, distinção entre as esfera profissional e privada, distancia do poder e planejamento. Em contrapartida, outros fatores como a discriminação positiva para os estrangeiros, diferenças em geneder equality e masculinidade, assim como com a atitude positiva dos workplaces e uma economia em crescimento, todos influenciam de maneira positiva a experiência do expatriado. Enfim, algumas sugestões práticas sobre os efeitos das diferenças culturais e sobre a estruturação de um possível cross-cultural training são expostas.