A coupled knowledge-based expert system for design of liquid-retaining structures

This paper describes a coupled knowledge-based system (KBS) for the design of liquid-retaining structures, which can handle both the symbolic knowledge processing based on engineering heuristics in the preliminary synthesis stage and the extensive numerical crunching involved in the detailed analysis stage. The prototype system is developed by employing blackboard architecture and a commercial shell VISUAL RULE STUDIO. Its present scope covers design of three types of liquid-retaining structures, namely, a rectangular shape with one compartment, a rectangular shape with two compartments and a circular shape. Through custom-built interactive graphical user interfaces, the user is directed throughout the design process, which includes preliminary design, load specification, model generation, finite element analysis, code compliance checking and member sizing optimization. It is also integrated with various relational databases that provide the system with sectional properties, moment and shear coefficients and final member details. This system can act as a consultant to assist novice designers in the design of liquid-retaining structures with increase in efficiency and optimization of design output and automated record keeping. The design of a typical example of the liquid-retaining structure is also illustrated. (C) 2003 Elsevier B.V All rights reserved.

Improving the environmental performance of bedding products by using life cycle assessment at the design stage

Improvement of the environmental performance of processes and products is a common objective in industry, and has been receiving increased attention in recent years. The main objective of this work is to evaluate the potential environmental impact of two bedding products, a polyurethane foam mattress (PFM) and a pocket spring mattress (PSM). These two types are the most common mattresses used in Europe. A Life Cycle Assessment (LCA) shows that the PFM has a higher environmental impact than the PSM. For both products the main cause of environmental impact is the manufacturing process, respectively the polyurethane foam block moulding process for the PFM, and the pocket spring nucleus process for the PSM. A scenario analysis shows the possibility of reducing the environmental impact of the products’ life cycle using an alternative End-of-Life scenario, resorting to incineration rather than landfill. Two strategies were also studied in order to reduce the environmental impact of the PFM: (1) reutilization of foam that was sent to the waste system management, and (2) a 20% weight reduction of the polyurethane foam. The second strategy has proven to be the most effective.

Mix design process of polyester polymer mortars modified with recycled GFRP waste materials

In this study, the effect of incorporation of recycled glass fibre reinforced plastics (GFRP) waste materials, obtained by means of shredding and milling processes, on mechanical behaviour of polyester polymer mortars (PM) was assessed. For this purpose, different contents of GFRP recyclates, between 4% up to 12% in weight, were incorporated into polyester PM materials as sand aggregates and filler replacements. The effect of the addition of a silane coupling agent to resin binder was also evaluated. Applied waste material was proceeding from the shredding of the leftovers resultant from the cutting and assembly processes of GFRP pultrusion profiles. Currently, these leftovers as well as non-conform products and scrap resulting from pultrusion manufacturing process are landfilled, with additional costs to producers and suppliers. Hence, besides the evident environmental benefits, a viable and feasible solution for these wastes would also conduct to significant economic advantages. Design of experiments and data treatment were accomplish by means of full factorial design approach and analysis of variance ANOVA. Experimental results were promising toward the recyclability of GFRP waste materials as partial replacement of aggregates and reinforcement for PM materials, with significant improvements on mechanical properties of resultant mortars with regards to waste-free formulations.

Design of experiments applied to the mix design process of polymer mortar materials modified with GFRP recyclates

In this work, the effect of incorporation of recycled glass fibre reinforced plastics (GFRP) waste materials, obtained by means of shredding and milling processes, on mechanical behavior of polyester polymer mortar (PM) materials was assessed. For this purpose, different contents of GFRP recyclates (between 4% up to 12% in mass), were incorporated into polyester PM materials as sand aggregates and filler replacements. The effect of silane coupling agent addition to resin binder was also evaluated. Applied waste material was proceeding from the shredding of the leftovers resultant from the cutting and assembly processes of GFRP pultrusion profiles. Currently, these leftovers, jointly with unfinished products and scrap resulting from pultrusion manufacturing process, are landfilled, with supplementary added costs. Thus, besides the evident environmental benefits, a viable and feasible solution for these wastes would also conduct to significant economic advantages. Design of experiments and data treatment were accomplish by means of full factorial design approach and analysis of variance ANOVA. Experimental results were promising toward the recyclability of GFRP waste materials as aggregates and reinforcement for PM materials, with significant improvements on mechanical properties with regard to non-modified formulations.

Design modular: Solução sustentável aplicada aos resíduos limpos na indústria do couro

ISSN 19820941

From creative ideas to new emerging ventures: the process of identification and exploitation among finnish design entrepreneurs

This study focuses on identification and exploitation processes among Finnish design entrepreneurs (i.e. selfemployed industrial designers). More specifically, this study strives to find out what design entrepreneurs do when they create new ventures, how venture ideas are identified and how entrepreneurial processes are organized to identify and exploit such venture ideas in the given industrial context. Indeed, what does educated and creative individuals do when they decide to create new ventures, where do the venture ideas originally come from, and moreover, how are venture ideas identified and developed into viable business concepts that are introduced on the markets? From an academic perspective: there is a need to increase our understanding of the interaction between the identification and exploitation of emerging ventures, in this and other empirical contexts. Rather than assuming that venture ideas are constant in time, this study examines how emerging ideas are adjusted to enable exploitation in dynamic market settings. It builds on the insights from previous entrepreneurship process research. The interpretations from the theoretical discussion build on the assumption that the subprocesses of identification and exploitation interact, and moreover, they are closely entwined with each other (e.g. McKelvie & Wiklund, 2004, Davidsson, 2005). This explanation challenges the common assumption that entrepreneurs would first identify venture ideas and then exploit them (e.g. Shane, 2003). The assumption is that exploitation influences identification, just as identification influences exploitation. Based on interviews with design entrepreneurs and external actors (e.g. potential customers, suppliers and collaborators), it appears as identification and exploitation of venture ideas are carried out in close interaction between a number of actors, rather than alone by entrepreneurs. Due to their available resources, design entrepreneurs have a desire to focus on identification related activities and to find external actors that take care of exploitation related activities. The involvement of external actors may have a direct impact on decisionmaking and various activities along the processes of identification and exploitation, which is something that previous research does not particularly emphasize. For instance, Bhave (1994) suggests both operative and strategic feedback from the market, but does not explain how external parties are actually involved in the decisionmaking, and in carrying out various activities along the entrepreneurial process.

A multicase study for the evaluation of a pattern-based visual design process for collaborative learning

Collage is a pattern-based visual design authoring tool for the creation of collaborative learning scripts computationally modelled with IMS Learning Design (LD). The pattern-based visual approach aims to provide teachers with design ideas that are based on broadly accepted practices. Besides, it seeks hiding the LD notation so that teachers can easily create their own designs. The use of visual representations supports both the understanding of the design ideas and the usability of the authoring tool. This paper presents a multicase study comprising three different cases that evaluate the approach from different perspectives. The first case includes workshops where teachers use Collage. A second case implies the design of a scenario proposed by a third-party using related approaches. The third case analyzes a situation where students follow a design created with Collage. The cross-case analysis provides a global understanding of the possibilities and limitations of the pattern-based visual design approach.

Constructability in the Bridge Design Process, Progress Report, HR-320, 1990

Information concerning standard design practices and details for the Iowa Department of Transportation (IDOT) was provided to the research team. This was reviewed in detail so that the researchers would be familiar with the terminology and standard construction details. A comprehensive literature review was completed to gather information concerning constructability concepts applicable to bridges. It was determined that most of the literature deals with constructability as a general topic with only a limited amount of literature with specific concepts for bridge design and construction. Literature was also examined concerning the development of appropriate microcomputer databases. These activities represent completion of Task 1 as identified in the study.

DFMA- Analysis and Aspects of Applying Internet Based Collaborative Design for Axial Eccentric Oil-Pump Design

The integrated system of design for manufacturing and assembly (DFMA) and internet based collaborative design are presented to support product design, manufacturing process, and assembly planning for axial eccentric oil-pump design. The presented system manages and schedules group oriented collaborative activities. The design guidelines of internet based collaborative design & DFMA are expressed. The components and the manufacturing stages of axial eccentric oil-pump are expressed in detail. The file formats of the presented system include the data types of collaborative design of the product, assembly design, assembly planning and assembly system design. Product design and assembly planning can be operated synchronously and intelligently and they are integrated under the condition of internet based collaborative design and DFMA. The technologies of collaborative modelling, collaborative manufacturing, and internet based collaborative assembly for the specific pump construction are developed. A seven-security level is presented to ensure the security of the internet based collaborative design system.

Customization, transparency and proximity: a user- centered content strategy applied to the design of a virtual library website

We present a case study of the redesign of the organizational presentation and content of the Virtual Library website at the Universitat Oberta de Catalunya (Open University of Catalonia, UOC), based on a user-centered design strategy. The aim of the redesign was to provide users with more intuitive, usable and understandable content (textual content, resources and services) by implementing criteria of customization, transparency and proximity. The study also presents a selection of best practices for applying these criteria to the design of other library websites.

Customization, transparency and proximity: a user- centered content strategy applied to the design of a virtual library website

We present a case study of the redesign of the organizational presentation and content of the Virtual Library website at the Universitat Oberta de Catalunya (Open University of Catalonia, UOC), based on a user-centered design strategy. The aim of the redesign was to provide users with more intuitive, usable and understandable content (textual content, resources and services) by implementing criteria of customization, transparency and proximity. The study also presents a selection of best practices for applying these criteria to the design of other library websites.

Are Evaluation of ICTs Investment Using Decision Support Systems:Case Applications from Distributor's and End User's Perspective Group Decision

The evaluation of investments in advanced technology is one of the most important decision making tasks. The importance is even more pronounced considering the huge budget concerning the strategic, economic and analytic justification in order to shorten design and development time. Choosing the most appropriate technology requires an accurate and reliable system that can lead the decision makers to obtain such a complicated task. Currently, several Information and Communication Technologies (ICTs) manufacturers that design global products are seeking local firms to act as their sales and services representatives (called distributors) to the end user. At the same time, the end user or customer is also searching for the best possible deal for their investment in ICT's projects. Therefore, the objective of this research is to present a holistic decision support system to assist the decision maker in Small and Medium Enterprises (SMEs) - working either as individual decision makers or in a group - in the evaluation of the investment to become an ICT's distributor or an ICT's end user. The model is composed of the Delphi/MAH (Maximising Agreement Heuristic) Analysis, a well-known quantitative method in Group Support System (GSS), which is applied to gather the average ranking data from amongst Decision Makers (DMs). After that the Analytic Network Process (ANP) analysis is brought in to analyse holistically: it performs quantitative and qualitative analysis simultaneously. The illustrative data are obtained from industrial entrepreneurs by using the Group Support System (GSS) laboratory facilities at Lappeenranta University of Technology, Finland and in Thailand. The result of the research, which is currently implemented in Thailand, can provide benefits to the industry in the evaluation of becoming an ICT's distributor or an ICT's end user, particularly in the assessment of the Enterprise Resource Planning (ERP) programme. After the model is put to test with an in-depth collaboration with industrial entrepreneurs in Finland and Thailand, the sensitivity analysis is also performed to validate the robustness of the model. The contribution of this research is in developing a new approach and the Delphi/MAH software to obtain an analysis of the value of becoming an ERP distributor or end user that is flexible and applicable to entrepreneurs, who are looking for the most appropriate investment to become an ERP distributor or end user. The main advantage of this research over others is that the model can deliver the value of becoming an ERP distributor or end user in a single number which makes it easier for DMs to choose the most appropriate ERP vendor. The associated advantage is that the model can include qualitative data as well as quantitative data, as the results from using quantitative data alone can be misleading and inadequate. There is a need to utilise quantitative and qualitative analysis together, as can be seen from the case studies.

Customization, transparency and proximity: a user- centered content strategy applied to the design of a virtual library website

We present a case study of the redesign of the organizational presentation and content of the Virtual Library website at the Universitat Oberta de Catalunya (Open University of Catalonia, UOC), based on a user-centered design strategy. The aim of the redesign was to provide users with more intuitive, usable and understandable content (textual content, resources and services) by implementing criteria of customization, transparency and proximity. The study also presents a selection of best practices for applying these criteria to the design of other library websites.

Product management in global sales operations

Työn tavoitteena oli määrittää myyntikonfiguraattorissa käytettävän tuotemallin yleinen rakenne. Ensin selvitettiin tuotemallin luomista ja konseptin suunnittelua kirjallisuuden ja asiantuntijoiden haastattelujen avulla. Asiantuntijoiden haastattelut toteutettiin vapaamuotoisesti kysymyslistaa apuna käyttäen. Tämän lisäksi työssä pohditaan sähköisen liiketoiminnan roolia sekä myyntikonfiguraattorin tulevaisuuden näkymiä. Diplomityössä käsitellään tuotemallia yleisellä tasolla. Toinen näkökulma käsittelee tuotemallia tietoteknisissä sovelluksissa käytettyjen menetelmien pohjalta. Tuotemallin muodostaminen aloitettiin asiakkaalle näkyvästä osasta eli myyntikonfiguraattorin ulkoasusta. Seuraava ongelma oli standardoida tuotetta ja tarjousta kuvaavat dokumentit globaalisti. Tähän ratkaisuun päädyttiin haastattelujen sekä asiantuntijoiden kokoontumisien pohjalta. Loppuosa diplomityöstä käsittelee myyntikonfiguraattorin asemaa kohdeyrityksen sähköisessä liiketoiminnassa sekä esittelee erään näkemyksen myyntikonfiguraattorin yhteenliittymästä asiakashallinta- ja tuotetiedonhallinta järjestelmiin. Diplomityössä saavutettiin asetetut tavoiteet: Myyntikonfigurattori yhtenäistää kohdeyrityksen hinnoittelua globaalisti, nopeuttaa tarjouksentekoprosessia, helpottaa uuden tuotteen lanseerausta ja standardoi tuotemallin globaalisti. Myyntikonfiguraattorin integrointi muihin tietojärjestelmiin tehostaa myynnin toimintoja. Haasteeksi jää loppukäyttäjien kannustaminen tehokkaaseen käyttöön sekä ylläpidon toteuttaminen. Ilman käyttäjiä ja heidän innostustaan voi projekti menettää johdon luottamuksen.

A Learner-Centred Game-Design Approach: Impacts on teachers" creativity

This study presents an innovative pedagogical approach where teachers become game designers and engage in creative teaching practices. Within co-design training workshops, 21 Spanish primary and secondary school teachers have developed their own Game-Based Learning (GBL) scenarios, especially tailored to their teaching contexts and students profiles. In total, teachers developed 13 GBL scenarios and put them into practice in real teaching contexts. The present paper analyses the impacts of this learner-centred game design approach on teachers" creativity from three different points of view: the GBL design process, the GBL scenario, and the teaching processes at stake.