Materiali a memoria di forma: caratterizzazione e applicazioni nel campo dei beni culturali

Questo lavoro di tesi nasce da un progetto di ricerca promosso nel 2001 dal Prof. Leonardo Seccia (Seconda Facoltà di Ingegneria, sede di Forlì, e C.I.R.A.M., Università di Bologna), dal Prof. Nicola Santopuoli (Facoltà di Architettura Valle Giulia, Sapienza Università di Roma), dal Prof. Ingo Muller e dal Dott. André Musolff (Technical University Berlin, Facultat III, Thermodynamics). Tale progetto ha avuto come obiettivo lo studio, la progettazione e la realizzazione di un dispositivo di ancoraggio in lega a memoria di forma per il restauro di affreschi e mosaici parietali, che presentino distacchi più o meno evidenti fra gli strati di intonaco di supporto, proponendosi come mezzo efficace per la salvaguardia strutturale di tali zone variamente ammalorate. In particolare, è stata programmata una serie di prove di laboratorio per caratterizzare in modo preciso il comportamento del materiale prescelto, al fine di realizzare un prototipo rispondente alle caratteristiche di progetto ed anche per implementare un modello numerico sufficientemente realistico. A questo proposito, è stato anche approfondito il problema della scelta del modello costitutivo più adeguato. Successivamente, i risultati ottenuti sono stati impiegati nella progettazione e realizzazione di nuovi dispositivi in lega a memoria di forma da impiegare nel campo dei beni culturali, fra cui sistemi reversibili per il ricongiungimento di parti fratturate e sistemi di movimentazione intelligenti sia per lastre di protezione di superfici affrescate, sia per finestre da inserire in contesti museali per il controllo del microclima.

Modellazione e simulazione di sistemi meccanici ad elevato numero di gradi di libertà mediante metodi non convenzionali e sistemi CAD

Recent developments in piston engine technology have increased performance in a very significant way. Diesel turbocharged/turbo compound engines, fuelled by jet fuels, have great performances. The focal point of this thesis is the transformation of the FIAT 1900 jtd diesel common rail engine for the installation on general aviation aircrafts like the CESSNA 172. All considerations about the diesel engine are supported by the studies that have taken place in the laboratories of the II Faculty of Engineering in Forlì. This work, mostly experimental, concerns the transformation of the automotive FIAT 1900 jtd – 4 cylinders – turbocharged – diesel common rail into an aircraft engine. The design philosophy of the aluminium alloy basement of the spark ignition engine have been transferred to the diesel version while the pistons and the head of the FIAT 1900 jtd are kept in the aircraft engine. Different solutions have been examined in this work. A first V 90° cylinders version that can develop up to 300 CV and whose weight is 30 kg, without auxiliaries and turbocharging group. The second version is a development of e original version of the diesel 1900 cc engine with an optimized crankshaft, that employ a special steel, 300M, and that is verified for the aircraft requirements. Another version with an augmented stroke and with a total displacement of 2500 cc has been examined; the result is a 30% engine heavier. The last version proposed is a 1600 cc diesel engine that work at 5000 rpm, with a reduced stroke and capable of more than 200 CV; it was inspired to the Yamaha R1 motorcycle engine. The diesel aircraft engine design keeps the bore of 82 mm, while the stroke is reduced to 64.6 mm, so the engine size is reduced along with weight. The basement weight, in GD AlSi 9 MgMn alloy, is 8,5 kg. Crankshaft, rods and accessories have been redesigned to comply to aircraft standards. The result is that the overall size is increased of only the 8% when referred to the Yamaha engine spark ignition version, while the basement weight increases of 53 %, even if the bore of the diesel version is 11% lager. The original FIAT 1900 jtd piston has been slightly modified with the combustion chamber reworked to the compression ratio of 15:1. The material adopted for the piston is the aluminium alloy A390.0-T5 commonly used in the automotive field. The piston weight is 0,5 kg for the diesel engine. The crankshaft is verified to torsional vibrations according to the Lloyd register of shipping requirements. The 300M special steel crankshaft total weight is of 14,5 kg. The result reached is a very small and light engine that may be certified for general aviation: the engine weight, without the supercharger, air inlet assembly, auxiliary generators and high pressure body, is 44,7 kg and the total engine weight, with enlightened HP pump body and the titanium alloy turbocharger is less than 100 kg, the total displacement is 1365 cm3 and the estimated output power is 220 CV. The direct conversion of automotive piston engine to aircrafts pays too huge weight penalties. In fact the main aircraft requirement is to optimize the power to weight ratio in order to obtain compact and fast engines for aeronautical use: this 1600 common rail diesel engine version demonstrates that these results can be reached.

Produzione di virus sintetici per lo studio dei meccanismi di interazione coinvolti nell'induzione di resistenza

Beet soil-borne mosaic virus (BSBMV) and Beet necrotic yellow vein virus (BNYVV) are members of Benyvirus genus. BSBMV has been reported only in the United States while BNYVV has a worldwide distribution. Both viruses are vectored by Polymyxa betae, possess similar host ranges, particles number and morphology. Both viruses are not serologically related but have similar genomic organizations. Field isolates consist of four RNA species but some BNYVV isolates contain a fifth RNA. RNAs 1 and 2 are essential for infection and replication while RNAs 3 and 4 play important roles on plant and vector interactions, respectively. Nucleotide and amino acid analyses revealed BSBMV and BNYVV are different enough to be classified in two different species. Additionally in BNYVV/BSBMV mixed infections, a competition was previous described in sugar beet, where BNYVV infection reduces BSBMV accumulation in both susceptible and resistant cultivars. Considering all this observations we hypothesized that BNYVV and BSBMV crossed study, exploiting their similarities and divergences, can improve investigation of molecular interactions between sugar beets and Benyviruses. The main achievement of our research is the production of a cDNA biologically active clones collection of BNYVV and BSBMV RNAs, from which synthetic copies of both Benyviruses can be transcribed. Moreover, through recombination experiments we demonstrated, for the first time, the BNYVV RNA 1 and 2 capability to trans-replicate and encapsidate BSBMV RNA 3 and 4, either the BSBMV RNA 1 and 2 capability to replicate BNYVV RNA2 in planta. We also demonstrated that BSBMV RNA3 support long-distance movement of BNYVV RNA 1 and 2 in B. macrocarpa and that 85 foreign sequence as p29HA, GFP and RFP, are successfully expressed, in C. quinoa, by BSBMV RNA3 based replicon (RepIII) also produced by our research. These results confirm the close correlation among the two viruses. Interestingly, the symptoms induced by BSBMV RNA-3 on C. quinoa leaves are more similar to necrotic local lesions caused by BNYVV RNA-5 p26 than to strongly chlorotic local lesions or yellow spot induced by BNYVV RNA- 3 encoded p25. As previous reported BSBMV p29 share 23% of amino acid sequence identity with BNYVV p25 but identity increase to 43% when compared with sequence of BNYVV RNA-5 p26. Based on our results the essential sequence (Core region) for the longdistance movement of BSBMV and BNYVV in B. macrocarpa, is not only carried by RNA3s species but other regions, perhaps located on the RNA 1 and 2, could play a fundamental role in this matter. Finally a chimeric RNA, composed by the 5’ region of RNA4 and 3’ region of RNA3 of BSBMV, has been produced after 21 serial mechanically inoculation of wild type BSBMV on C. quinoa plants. Chimera seems unable to express any protein, but it is replicated and transcript in planta. It could represent an important tool to study the interactions between Benyvirus and plant host. In conclusion different tools, comprising a method to study synthetic viruses under natural conditions of inoculum through P. Betae, have been produced and new knowledge are been acquired that will allow to perform future investigation of the molecular interactions between sugar beets and Benyviruses.

Analisi e simulazione di un convertitore a tre livelli per applicazioni di potenza

La tesi presenta l'analisi del funzionamento di un inverter a tre livelli di tipo diode-clamped, confrontando tra loro varie tecniche di modulazione e valutandone l'efficienza (per ulteriori informazioni contattare matteo.toffano@gmail.com).

Analisi e ottimizzazione termodinamica del sistema di generazione di potenza di un impianto solare a concentrazione ibrido

Impianto solare termodinamico a concentrazione per la produzione di energia elettrica.