Tunable and multiple-wavelengths/temporal output from gain-switched diode laser and a four Bragg-grating fiber

The spectral narrowing and selective tuning of picosecond pulse outputs from gain-switched diode laser and a four Bragg-grating fiber, were investigated. The fiber used under investigation was designed to provide spectral narrowing and multiple wavelength/temporal output. The maximum transmission out of each of the four output fibers was ∼7.5 mW, for a current of 180 mA. The results show that an output of any combination of multiple wavelengths is only produced at modulation frequencies which satisfy resonant conditions for all cavity arms simultaneously.

A novel dual complementary output optical fiber transversal filter for DWDM applications

A novel dual complementary output optical fiber transversal filter is realized for DWDM applications. Stable, simultaneous complementary filter responses with flattened passbands and large sidelobe suppressions are achieved with a single-line cascaded Hi-Bi fiber structure.

Optimum Trajectory of Dynamic Input-Output Balance Model for Open Economy

When export and import is connected with output of basic production, and criterion functional represents a final state of economy, the generalization of classical qualitative results of the main-line theory on a case of dynamic input-output balance optimization model for open economy is given.

300-mW average output power hybrid mode-locked thulium-doped fiber laser

We report on ring thulium-doped fiber laser hybrid mode-locked by single-walled carbon nanotubes and nonlinear polarization evolution generating 600-fs pulses at 1910-1980nm wavelength band with 72.5MHz repetition rate. Average output power reached 300mW in single-pulse operation regime, corresponding to 4.88kW peak power and 2.93nJ pulse energy.

Unveiling temporal correlations characteristic of a phase transition in the output intensity of a fiber laser

We use advanced statistical tools of time-series analysis to characterize the dynamical complexity of the transition to optical wave turbulence in a fiber laser. Ordinal analysis and the horizontal visibility graph applied to the experimentally measured laser output intensity reveal the presence of temporal correlations during the transition from the laminar to the turbulent lasing regimes. Both methods unveil coherent structures with well-defined time scales and strong correlations both, in the timing of the laser pulses and in their peak intensities. Our approach is generic and may be used in other complex systems that undergo similar transitions involving the generation of extreme fluctuations.

Carbon efficiency evaluation:an analytical framework using fuzzy DEA

Data Envelopment Analysis (DEA) is a powerful analytical technique for measuring the relative efficiency of alternatives based on their inputs and outputs. The alternatives can be in the form of countries who attempt to enhance their productivity and environmental efficiencies concurrently. However, when desirable outputs such as productivity increases, undesirable outputs increase as well (e.g. carbon emissions), thus making the performance evaluation questionable. In addition, traditional environmental efficiency has been typically measured by crisp input and output (desirable and undesirable). However, the input and output data, such as CO2 emissions, in real-world evaluation problems are often imprecise or ambiguous. This paper proposes a DEA-based framework where the input and output data are characterized by symmetrical and asymmetrical fuzzy numbers. The proposed method allows the environmental evaluation to be assessed at different levels of certainty. The validity of the proposed model has been tested and its usefulness is illustrated using two numerical examples. An application of energy efficiency among 23 European Union (EU) member countries is further presented to show the applicability and efficacy of the proposed approach under asymmetric fuzzy numbers.

Novel input-output prediction approach for biomass pyrolysis

Biomass pyrolysis to bio-oil is one of the promising sustainable fuels. In this work, relation between biomass feedstock element characteristic and pyrolysis process outputs was explored. The element characteristics considered in this study include moisture, ash, fix carbon, volatile matter, carbon, hydrogen, nitrogen, oxygen, and sulphur. A semi-batch fixed bed reactor was used for biomass pyrolysis with heating rate of 30 °C/min from room temperature to 600 °C and the reactor was held at 600 °C for 1 h before cooling down. Constant nitrogen flow rate of 5 L/min was provided for anaerobic condition. Rice husk, Sago biomass and Napier grass were used in the study to form different element characteristic of feedstock by altering mixing ratio. Comparison between each element characteristic to total produced bio-oil yield, aqueous phase bio-oil yield, organic phase bio-oil yield, higher heating value of organic phase bio-oil, and organic bio-oil compounds was conducted. The results demonstrate that process performance is associated with feedstock properties, which can be used as a platform to access the process feedstock element acceptance range to estimate the process outputs. Ultimately, this work evaluated the element acceptance range for proposed biomass pyrolysis technology to integrate alternative biomass species feedstock based on element characteristic to enhance the flexibility of feedstock selection.

DFIG machine design for maximizing power output based on surrogate optimization algorithm

This paper presents a surrogate-model-based optimization of a doubly-fed induction generator (DFIG) machine winding design for maximizing power yield. Based on site-specific wind profile data and the machine's previous operational performance, the DFIG's stator and rotor windings are optimized to match the maximum efficiency with operating conditions for rewinding purposes. The particle swarm optimization-based surrogate optimization techniques are used in conjunction with the finite element method to optimize the machine design utilizing the limited available information for the site-specific wind profile and generator operating conditions. A response surface method in the surrogate model is developed to formulate the design objectives and constraints. Besides, the machine tests and efficiency calculations follow IEEE standard 112-B. Numerical and experimental results validate the effectiveness of the proposed technologies.

The calculation of dynamic ecological footprint on the basis of the dynamic input-output model

The Leontief input-output model is widely used to determine the ecological footprint of consumption in a region or a country. It is able to capture spillover environmental effects along the supply change, thus its popularity is increasing in ecology related economic research. These studies are static and the dynamic investigations are neglected. The dynamic Leontief model makes it possible to involve the capital and inventory investment in the footprint calculation that projects future growth of GDP and environmental impacts. We show a new calculation method to determine the effect of capital accumulation on ecological footprint. Keywords: Dynamic Leontief model, Dynamic ecological footprint, Environmental management, Allocation method

A magyar felsőoktatási rendszer válaszai társadalmi-gazdasági kihívásokra. A felsőoktatás input-output elemzése versenykörnyezetben

A magyar felsőoktatás 2004-től számos tekintetben radikális fordulatot él át. Az abszolút tömegesedés időszaka véget ért. Továbbra is beszélhetünk ugyanakkor relatív tömegesedésről. A relatív tömegesedés a negatív demográfiai trenddel párosulva az egyik meghatározó kihívás a kormányzat és a felsőoktatási intézmények számára egyaránt. Az előadás ebből az alaphelyzetből kiindulva sorra veszi a felsőoktatási intézményeket input és output oldalon érő kihívásokat és szembesíti ezeket részben a szabályozási környezettel, másrészt pedig a stakeholderek igényeivel, illetve a felsőoktatási teljesítménnyel. A kihívások és kihívásokra adott válaszok egy tágabb regionális és globális térben is értelmezést nyernek.

A Dynamic Input-Output Model with Renewable Resources

The paper studies a generalisation of the dynamic Leontief input-output model. The standard dynamic Leontief model will be extended with the balance equation of renewable resources. The renewable stocks will increase regenerating and decrease exploiting primary natural resources. In this study the controllability of this extended model is examined by taking the consumption as the control parameter. Assuming balanced growth for both consumption and production, we investigate the exhaustion of renewable resources in dependence on the balanced growth rate and on the rate of natural regeneration. In doing so, classic results from control theory and on eigenvalue problems in linear algebra are applied.

A Dynamic Input-Output Model with Renewable Resources

The paper studies a generalisation of the dynamic Leontief input-output model. The standard dynamic Leontief model will be extended with the balance equation of renewable resources. The renewable stocks will increase regenerating and decrease exploiting primary natural resources. In this study the controllability of this extended model is examined by taking the consumption as the control parameter. Assuming balanced growth for both consumption and production, we investigate the exhaustion of renewable resources in dependence on the balanced growth rate and on the rate of natural regeneration. In doing so, classic results from control theory and on eigenvalue problems in linear algebra are applied.

Kompetencia alapú, output orientált oktatás az ideális foglalkoztathatóság érdekében

A kutatási projektünk tanulmánysorozata a magyar gazdaság fejlődésének különböző gazdaságfejlesztési útjait vizsgálja 2020-ig, amelyben a foglalkoztathatóság kérdése kulcs szerepet kapott. Jelen tanulmányunkban arra a kutatási kérdésre keressük a választ, hogy milyen oktatási rendszerre lenne szüksége a magyar gazdaságnak ahhoz, hogy az említett 2020-ig megvalósítható különböző gazdaságfejlesztési utak számára, biztosítani tudja a megfelelő mennyiségű és minőségű emberi erőforrást. A kutatási kérdés megválaszolásának érdekében bemutattuk az oktatási rendszer értékteremtési logikáját, a kompetencia alapú, outputorientált oktatás koncepcióját, a jelenlegi oktatási rendszert és annak kialakulását a rendszerváltás óta, valamint a gazdaságfejlesztési utak megvalósulásához készített számításainkat. A magyar oktatási rendszer, annak stacioner fejlődése esetén nem lesz képes még a stacioner gazdaságfejlesztési út (átlagosan évi 1%-os GDP növekedés 2020-ig) emberi erőforrás szükségletének a biztosítására sem, nemhogy az ennél magasabb GDP növekedéssel járó ipari termelésen, vagy gazdasági szolgáltatásokon nyugvó különböző szcenáriók szükségletének biztosítására. A diplomások túlképzésének a hiedelme megalapozatlan, nem a diplomások mennyiségével van a probléma, mivel belőlük lesz a legnagyobb hiány a különböző gazdaságfejlesztési pályák alapján, hanem maximum azok minősége vethet fel kérdéseket. Ahhoz, hogy a gazdasági növekedésünk mögé az emberi erőforrás hazánkban megfelelő minőségű és mennyiségű legyen egy teljesen új koncepció szükséges az oktatással kapcsolatban. Be kell vezetni a kompetencia alapú, output orientált oktatási modellt, amelynek irányításában a munkaerőpiac szerepét jelentősen meg kell erősíteni, és az át-, és továbbképzések területének hangsúlyát jelentősen növelni kell. Mindezek hiányában, vagy az óhajtott gazdasági növekedés nem lesz megvalósítható, vagy fél milliós nagyságrendű képzett munkaerő importjára fog Magyarország rászorulni. ________ The working papers of our research project analyze the development paths of the Hungarian economy until 2020, where employability is one of the cornerstones of the research. The research question addressed in this paper is what kind of educational system does Hungary need if we want to provide the needed human resources for the mentioned development paths until 2020. To answer the research question we introduced the value creation logic of the educational system, the concept of competency based output oriented education, today’s educational system and its 20 years history and our calculations for the development paths. The Hungarian educational system with its stationer development will not be able to provide the needed human resources to the stationer economic development path (average 1% GDP growth until 2020), not to mention the more productive manufacturing based or service based scenarios. The belief of overeducation in higher education is unfounded, the graduates will have the highest shortage according to the development paths, however their quality could raise some questions. To provide the needed quality and quantity in human resources for the economic development we need to implement a radically new educational concept, the competency based output oriented educational system, where the control of labor market and the emphasis of retraining, development as well as life-long learning has to be significantly strengthened. Without these either the desired growth will not be achievable or we should import around half million trained worker to Hungary.

On the accuracy of nonsurvey regional input-output multipliers: An empirical study

Correct specification of the simple location quotients in regionalizing the national direct requirements table is essential to the accuracy of regional input-output multipliers. The purpose of this research is to examine the relative accuracy of these multipliers when earnings, employment, number of establishments, and payroll data specify the simple location quotients.^ For each specification type, I derive a column of total output multipliers and a column of total income multipliers. These multipliers are based on the 1987 benchmark input-output accounts of the U.S. economy and 1988-1992 state of Florida data.^ Error sign tests, and Standardized Mean Absolute Deviation (SMAD) statistics indicate that the output multiplier estimates overestimate the output multipliers published by the Department of Commerce-Bureau of Economic Analysis (BEA) for the state of Florida. In contrast, the income multiplier estimates underestimate the BEA's income multipliers. For a given multiplier type, the Spearman-rank correlation analysis shows that the multiplier estimates and the BEA multipliers have statistically different rank ordering of row elements. The above tests also find no significant different differences, both in size and ranking distributions, among the vectors of multiplier estimates. ^

Nonlinear dynamics and chaos simulation system analysis for improved design

Small errors proved catastrophic. Our purpose to remark that a very small cause which escapes our notice determined a considerable effect that we cannot fail to see, and then we say that the effect is due to chance. Small differences in the initial conditions produce very great ones in the final phenomena. A small error in the former will produce an enormous error in the latter. When dealing with any kind of electrical device specification, it is important to note that there exists a pair of test conditions that define a test: the forcing function and the limit. Forcing functions define the external operating constraints placed upon the device tested. The actual test defines how well the device responds to these constraints. Forcing inputs to threshold for example, represents the most difficult testing because this put those inputs as close as possible to the actual switching critical points and guarantees that the device will meet the Input-Output specifications. ^ Prediction becomes impossible by classical analytical analysis bounded by Newton and Euclides. We have found that non linear dynamics characteristics is the natural state of being in all circuits and devices. Opportunities exist for effective error detection in a nonlinear dynamics and chaos environment. ^ Nowadays there are a set of linear limits established around every aspect of a digital or analog circuits out of which devices are consider bad after failing the test. Deterministic chaos circuit is a fact not a possibility as it has been revived by our Ph.D. research. In practice for linear standard informational methodologies, this chaotic data product is usually undesirable and we are educated to be interested in obtaining a more regular stream of output data. ^ This Ph.D. research explored the possibilities of taking the foundation of a very well known simulation and modeling methodology, introducing nonlinear dynamics and chaos precepts, to produce a new error detector instrument able to put together streams of data scattered in space and time. Therefore, mastering deterministic chaos and changing the bad reputation of chaotic data as a potential risk for practical system status determination. ^