Characterization of commercial double-walled carbon nanotube material : composition, structure, and heat capacity

A purified commercial double-walled carbon nanotube (DWCNT) sample was investigated by transmission electron microscopy (TEM), thermogravimetry (TG), and Raman spectroscopy. Moreover, the heat capacity of the DWCNT sample was determined by temperature-modulated differential scanning calorimetry in the range of temperature between -50 and 290 °C. The main thermo-oxidation characterized by TG occurred at 474 °C with the loss of 90 wt% of the sample. Thermo-oxidation of the sample was also investigated by high-resolution TG, which indicated that a fraction rich in carbon nanotube represents more than 80 wt% of the material. Other carbonaceous fractions rich in amorphous coating and graphitic particles were identified by the deconvolution procedure applied to the derivative of TG curve. Complementary structural data were provided by TEM and Raman studies. The information obtained allows the optimization of composites based on this nanomaterial with reliable characteristics.

Increasing relevance and interest : teaching environmental and planning law to built environment students

A new approach was taken to delivering a challenging "stewarship of land" unit to over 350 predominantly first year built environment students stewardship. The new approach involved incorporating environmental and planning law into the syllabus, exposing students to a wide range of statutes, selecting legal cases according to a et of criteria and revisiting the material using different modes of delivery and teaching resources. To evaluate the effectiveness of the new approach, the students were surveyed to elicit their learning experience and preferences. The survey found that most students perceived learning about environmental and planning law, including legal cases, worthwhile.----- Areas identified by the surcey for improvement included the perception by some students that: environmenatl and planning law is irrelevant to their discipline and future caree; studying law is dull and sometimes daunting; and the prescribed reading could be omitted.----- To address student perceptions, it is proposed to reorder the topics commencing with local, charismatic topics, while explanding international content and cases, to enlarge and enhance the repertoire of video clips to include sites of legal cawses and development projects, and to reformat the online weekly quizzes to promote reading of primary material.----- Overall, the approach to teaching environmental and planning law to built environment students, including the criteria for selecting legal cases, described in this paper, was found to be effective.

Through the clock's workings

Through the Clock’s Workings is a world first: a remixed and remixable anthology of literature.----- Prominent Australian authors have written new short stories and released them under a Creative Commons Attribution Non-Commercial ShareAlike licence. What that means is you can remix the stories, but only if you acknowledge the author, the remix is not for commercial use, and your new work is available for others to remix. The authors’ stories were made available on our website and new and emerging writers were invited to create their own remixes to be posted on the website and considered for publication in the print anthology alongside the original stories.----- The result is a world first: a remixed and remixable anthology of literature. Buy your copy now from the Sydney University Press eStore or download the electronic version.----- So how do you use a remixable anthology? Simple.----- Step 1 - Read. Thumb your way through the pages at will. Find the stories you love, the ones you hate, the ones that could be better.----- Step 2 - Re/create. Each story is yours to share and to remix. Use only one paragraph or character or just make subtle changes. Change the genre, alter its formal or stylistic characteristics, or revise its message. Use as little or as much as you like - as long as it works.----- Step 3 - Share. Be part of a growing community of literature remixing. Email your remix to us and start sharing. The entire anthology can be remixed - the original stories, the remixes, and even the fonts.----- Through the Clock’s Workings is Read&Write!

Cooperation using a robotic ad hoc network made from Bluetooth, JXTA, OSGi and other commercial off the shelf (COTS) products

Abstract - Mobile devices in the near future will need to collaborate to fulfill their function. Collaboration will be done by communication. We use a real world example of robotic soccer to come up with the necessary structures required for robotic communication. A review of related work is done and it is found no examples come close to providing a RANET. The robotic ad hoc network (RANET) we suggest uses existing structures pulled from the areas of wireless networks, peer to peer and software life-cycle management. Gaps are found in the existing structures so we describe how to extend some structures to satisfy the design. The RANET design supports robot cooperation by exchanging messages, discovering needed skills that other robots on the network may possess and the transfer of these skills. The network is built on top of a Bluetooth wireless network and uses JXTA to communicate and transfer skills. OSGi bundles form the skills that can be transferred. To test the nal design a reference implementation is done. Deficiencies in some third party software is found, specifically JXTA and JamVM and GNU Classpath. Lastly we look at how to fix the deciencies by porting the JXTA C implementation to the target robotic platform and potentially eliminating the TCP/IP layer, using UDP instead of TCP or using an adaptive TCP/IP stack. We also propose a future areas of investigation; how to seed the configuration for the Personal area network (PAN) Bluetooth protocol extension so a Bluetooth TCP/IP link is more quickly formed and using the STP to allow multi-hop messaging and transfer of skills.

Advertising education in Australia: Looking back to the future

In Australia, advertising is a $13 billion industry which needs a supply of suitably skilled employees. Over the years, advertising education has developed from vocational based courses to degree courses across the country. This paper uses diffusion theory and various secondary sources and interviews to observe the development of advertising education in Australia from its early past, to its current day tertiary offerings, to discussing the issues that are arising in the near future. Six critical issues are identified, along with observations about the challenges and opportunities within Australia advertising education. By looking back to the future, it is hoped that this historical review provides lessons for other countries of similar educational structure or background, or even other marketing communication disciplines on a similar evolutionary path.

Consumer protection in the banking sector : reviewing the Code of Banking Practice

This article explains the relevance of the Code and its place in the regulatory framework, discusses some of the key issues arising in the recent review (as identified by consumer advocates1), and explains the relationship between the Code and the Financial Ombudsman Service.

Contemporary issues in Australian family law: Do we need a more unified and interventionist judicial model

Recent decisions of the Family Court of Australian reflect concerns over the adversarial nature of the legal process. The processes and procedures of the judicial system militate against a detailed examination of the issues and rights of the parties in dispute. The limitations of the family law framework are particularly demonstrated in disputes over the custody of children where the Court has tended to neglect the rights and interests of the primary carer. An alternative "unified family court" framework will be examined in which the Court pursues a more active and interventionist approach in the determination of family law disputes.

Beyond Bryan: Builders' liability and pure economic loss

In Bryan v Maloney, the High Court extended a builder’s duty of care to encompass a liability in negligence for the pure economic loss sustained by a subsequent purchaser of a residential dwelling as a result of latent defects in the building’s construction. Recently, in Woolcock Street Investments Pty Ltd v CDG Pty Ltd, the Court refused to extend this liability to defects in commercial premises. The decision therefore provides an opportunity to re-examine the rationale and policy behind current jurisprudence governing builders’ liability for pure economic loss. In doing so, this article considers the principles relevant to the determination of a duty of care generally and whether the differences between purchasers of residential and commercial properties are as great as the case law suggests

Retrospectivity and the rule of law

This book analyses and refines the arguments for and against retrospective rule making, concluding that there is one really strong argument against it: the expectation that, if an individual's actions are considered by a future court, the legal consequences of that action will be determined by the law that was discoverable at the time the action was performed. This argument, which goes to the heart of the rule of law, is generally determinative. However, in some cases the argument does not run and this book suggests that, in some areas of law, reliance should be actively discouraged by prospective warnings that the law is subject to change.

Virtual design process : design validation tool schematic approach in car carrier

An important aspect of designing any product is validation. Virtual design process (VDP) is an alternative to hardware prototyping in which analysis of designs can be done without manufacturing physical samples. In recent years, VDP have been generated either for animation or filming applications. This paper proposes a virtual reality design process model on one of the applications when used as a validation tool. This technique is used to generate a complete design guideline and validation tool of product design. To support the design process of a product, a virtual environment and VDP method were developed that supports validation and an initial design cycle performed by a designer. The product model car carrier is used as illustration for which virtual design was generated. The loading and unloading sequence of the model for the prototype was generated using automated reasoning techniques and was completed by interactively animating the product in the virtual environment before complete design was built. By using the VDP process critical issues like loading, unloading, Australian Design rules (ADR) and clearance analysis were done. The process would save time, money in physical sampling and to large extent in complete math generation. Since only schematic models are required, it saves time in math modelling and handling of bigger size assemblies due to complexity of the models. This extension of VDP process for design evaluation is unique and was developed, implemented successfully. In this paper a Toll logistics and J Smith and Sons car carrier which is developed under author’s responsibility has been used to illustrate our approach of generating design validation via VDP.

Environmental assessment for commercial buildings: Stakeholder requirements and tool characteristics

The Cooperative Research Centre for Construction Innovation (CRC CI) is a national research, development and implementation centre focused on the needs of the property, design, construction and facility management sectors. Established in 2001 and headquartered at Queensland University of Technology as an unincorporated joint venture under the Australian Government's Cooperative Research Program, the CRC CI is developing key technologies, tools and management systems to improve the effectiveness of the construction industry. The CRC CI is a seven year project funded by a Commonwealth grant and industry, research and other government support. More than 150 researchers and an alliance of 19 leading partner organisations are involved in and support the activities of the CRC CI

Evaluation of functional performance in commercial buildings

This report fully summarises a project designed to enhance commercial real estate performance within both operational and investment contexts through the development of a model aimed at supporting improved decision-making. The model is based on a risk adjusted discounted cash flow, providing a valuable toolkit for building managers, owners, and potential investors for evaluating individual building performance in terms of financial, social and environmental criteria over the complete life-cycle of the asset. The ‘triple bottom line’ approach to the evaluation of commercial property has much significance for the administrators of public property portfolios in particular. It also has applications more generally for the wider real estate industry given that the advent of ‘green’ construction requires new methods for evaluating both new and existing building stocks. The research is unique in that it focuses on the accuracy of the input variables required for the model. These key variables were largely determined by market-based research and an extensive literature review, and have been fine-tuned with extensive testing. In essence, the project has considered probability-based risk analysis techniques that required market-based assessment. The projections listed in the partner engineers’ building audit reports of the four case study buildings were fed into the property evaluation model developed by the research team. The results are strongly consistent with previously existing, less robust evaluation techniques. And importantly, this model pioneers an approach for taking full account of the triple bottom line, establishing a benchmark for related research to follow. The project’s industry partners expressed a high degree of satisfaction with the project outcomes at a recent demonstration seminar. The project in its existing form has not been geared towards commercial applications but it is anticipated that QDPW and other industry partners will benefit greatly by using this tool for the performance evaluation of property assets. The project met the objectives of the original proposal as well as all the specified milestones. The project has been completed within budget and on time. This research project has achieved the objective by establishing research foci on the model structure, the key input variable identification, the drivers of the relevant property markets, the determinants of the key variables (Research Engine no.1), the examination of risk measurement, the incorporation of risk simulation exercises (Research Engine no.2), the importance of both environmental and social factors and, finally the impact of the triple bottom line measures on the asset (Research Engine no. 3).

Foucault Goes to Law School : Using Foucault to Examine Australian Legal Education

This paper will consider the way that Foucault’s work has been utilised to examine Australian legal education, particularly in the context of understanding the construction of the legal identity. While remaining sensitive to the many potential ‘uses’ of Foucault’s tools, as well as his problematisation of the author as an organising feature of discourse, this paper will argue that legal education scholarship overwhelmingly utilises concepts such as ‘discourse’ and ‘power-knowledge’, which, while useful, cannot provide a nuanced understanding of the construction of the legal identity. Consequently, this paper suggests that future legal education research utilise Foucault’s concepts of ‘ethics’ and ‘governmentality’ to address these issues.

The Financial Benefit For Insurers : Mediate in Personal Injuries Disputes

Resolving insurance disputes can focus only on quantum. Where insurers adopt integrative solutions they can enjoy cost savings and higher customer satisfaction. An integratively managed process can expand the negotiation options. The potential inherent in plaintiff’s emotions to resolve matters on an emotional basis, rather than an economic one, is explored. Using research, the author demonstrates how mediations are more likely to obtain integrative outcomes than unmediated conferences. Using a combination of governmental reports, published studies and academic publications, the paper demonstrates how mediation is more likely to foster an environment where the parties communicate and cooperate. Research is employed to demonstrate where mediators can reduce hostilities, in circumstances where negotiating parties alone would likely fail. Generally the paper constructs an argument to support the proposition that mediation can offer insurers an effective mechanism to reduce costs and increase customer satisfaction. INTRODUCTION Mediation can offer insurers an effective mechanism to reduce costs and increase customer satisfaction. This paper will first demonstrate the differences between distributive and integrative outcomes. It is argued insurer’s interest can be far better served through obtaining an integrative solution. The paper explains how the mediator can assist both parties to obtain an integrative outcome. Simultaneously the paper explores the extreme difficulties conference participants face in obtaining an integrative outcome without a mediator in an adversarial climate. The mediator’s ability to assist in the facilitation of integrative information exchange, defuse hostilities and reality check expectations is discussed. The mediator’s ability to facilitate in this area is compared to the inability of conference participants to achieve similar results. This paper concludes, the potential financial benefit offered by integrative solutions, combined with the ability of mediation to deliver such outcomes where unmediated conferences cannot deliver, leads to the recommendation that insurers opt for a mediation to best serve their commercial interests.