A Quality Assessment of Titanium Castings Produced in an Experimental Short-Heating-Cycle Investment

The aim of this study was to evaluate the quality of casting produced in an experimental short-term heating-cycle investment. Thus, reaction layer and castability of titanium casting using an experimental spinel-based investment (VR) with short heating cycle were compared with the commercial short-heating-cycle spinel-based investment Trinell (TR), the silica-phosphate-based investment Rematitan Plus ( RP), and the conventional spinel-based investment Rematitan Ultra (RU). VR has polymeric fibers added to inorganic particles. Reaction layer assessments were carried out using Vickers hardness and elemental analysis using dispersive X-ray microanalysis (EDX). Mesh patterns were used for castability test, and powder characterization was made by scanning electron microscopy (SEM). Hardness evaluation showed no difference among the investments between 100 and 200 mu m. The most important contaminant element for VR, TR, and RU was oxygen. Higher levels of mold filling were found for TR, VR, and RU compared with that obtained with RP. The quality of castings, characterized by means of the assessments of reaction layer and castability, made from the VR was similar to the commercial investments TR and RU but superior to the RP.

Cassava root husks powder as green adsorbent for the removal of Cu(II) from natural river water

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Seasonal variability of a conditional stability constant and the characterization of sedimentary humic substances from typical agricultural and urban areas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Cobalt(III) complexes with thiosemicarbazones as potential anti-Mycobacterium tuberculosis agents

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Synthesis, characterization, and thermal behavior of palladium(II) complexes containing 4-iodopyrazole

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Synthesis and thermal behavior study of complexes of the type [Pd(mu-X)(4-eb-p-phen)](2) (X = Cl, Br, I, N-3, NCO, SCN) and 4-eb-p-phen [bis(4-ethylbenzyl)p-phenylenediimine]

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Synthesis and biological evaluation of ternary silver compounds bearing N,N-chelating ligands and thiourea: X-ray structure of [{Ag(bpy) (mu-tu)}(2)](NO3)(2) (bpy=2,2 '-bipyridine; tu = thiourea)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Synthesis and characterization of cross-linked molecularly imprinted polyacrylamide for the extraction/preconcentration of glyphosate and aminomethylphosphonic acid from water samples

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Adsorption/desorption of arsenic by tropical peat: influence of organic matter, iron and aluminium

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Caracterização de cerâmicas a base de nitreto de silício para aplicações estruturais

The need for development of new materials is a natural process in the companies’ technological point of view, seeking improvements in materials and processes. Specifically, among the materials, ceramic exhibit valuable properties, especially the covalent ceramics which have excellent properties for applications which requires the abrasion resistance, hardness, high temperatures, resistence, etc. being a material that has applications in several areas. Most studies are related to improvement of properties, specially fracture toughness that allows the expansion of its application. Among the most promising ceramic materials are silicon nitride (Si3N4) which has excellent properties. The goal of this work was the development and caracterization of Si3N4-based ceramics, doped with yttrium oxide (Y2O3), rar earth concentrate (CTR2O3) and cerium oxide (CeO2) in the same proportion for the evaluation of properties. The powders' mixtures were homogenized, dried and compressed under pressure uniaxial and isostatic. Sintering was carried out in 1850 ⁰C under pressure of 0,1MPa N2 for 1 h with a heating rate of 25 ⁰C / min and cooling in the furnace inertia. The characterizations were performed using Archimedes principle to relative density, weight loss by measuring before and after sintering, phase analysis by X-ray diffraction, microstructure by scanning electron microscope (SEM), hardness and fracture toughness by the method Vickers indentation. The results obtained showed relative density of 97-98%, Vickers hardness 17 to 19 GPa, fracture toughness 5.6 to 6.8 MPa.m1/2, with phases varying from α-SiAlON and β-Si3N4 depending the types of additives used. The results are promising for tribological applications and can be defined according to the types of additives to be used

Caracterização estrutural de substâncias húmicas aquáticas extraídas dos rios Itapanhaú e Ribeira de Iguape

The knowledge of the structure characteristic of the Organic Matter is important for the understanding of the natural process. In this context aquatic humic substances (principal fraction) were isolated from water sample collected from the two distinct rivers, using procedure recommended for International Humic Substances Society and characterized by elemental analysis, electron paramagnetic resonance and nuclear magnetic resonance (13C NMR). The results were interpreted using principal component analysis (PCA) and the statistical analyses showed different in the structural characteristics of the aquatic humic substances studied.

Síntese, caracterização e estudo termoanalítico dos nicotinatos de alguns metais de transição bivalentes no estado sólido

Pós-graduação em Química - IQ

Caracterização química e estudo térmico de lodos provenientes da estação de tratamento de esgotos de Ribeirão Preto, SP, Brasil

Pós-graduação em Química - IQ

Complexos heterobilantanídicos luminescentes sob excitação UV e raios X

Pós-graduação em Química - IQ

Inorganic and organic trace mineral supplementation in weanling pig diets

A study was conducted to evaluate the s of dietary inorganic and organic trace minerals in two levels of supplementation regarding performance, diarrhea occurrence, hematological parameters, fecal mineral excretion and mineral retention in metacarpals and liver of weanling pigs. Seventy piglets weaned at 21 days of age with an average initial body weight of 6.70 ± 0.38 kg were allotted in five treatments: control diet (no added trace mineral premix); 50% ITMP (control diet with inorganic trace mineral premix supplying only 50% of trace mineral requirements); 50% OTMP (control diet with organic trace mineral premix supplying only 50% of trace mineral requirements); 100% ITMP (control diet with inorganic trace mineral premix supplying 100% of trace mineral requirements); and 100% OTMP (control diet with organic trace mineral premix supplying 100% of trace mineral requirements). Feed intake and daily weight gain were not affected by treatments, however, piglets supplemented by trace minerals presented better gain:feed ratio. No differences were observed at calcium, phosphorus, potassium, magnesium, sodium and sulfur excreted in feces per kilogram of feed intake. Treatments did not affect calcium, phosphorus, magnesium, sulfur and iron content in metacarpals. Trace mineral supplementation, regardless of level and source, improved the performance of piglets.