(Table 1) Planktonic foraminifer abundance and stable isotope ratios of a sediment core near Baddeckenstedt, north Germany

A refined sample processing technique using glacial acetic acid has been applied to Upper Cenomanian and Lower Turonian limestones from Baddeckenstedt (Lower Saxony) enabeling the first quantitative analysis of planktonic foraminiferal populations through the Stage boundary succession in northwestern Germany. Measurements of carbonate contents, organic carbon and stable carbon and oxygen isotopes were also reported. These data allow a correlation to be made of the Baddeckenstedt section with those at Misburg (basinal facies, northwestern Germany) and Dover (Plenus Marls, southern England). Significant maxima of the organic carbon content at Baddeckenstedt correspond to prominent black shale couplets at Misburg. The planktonic foraminiferal generic groups show at Baddeckenstedt similar fluctuations as reported from Dover. Their correlation reveals details of a complex paleoceanographic regime in the NW-German Basin during the Cenomanian/Turonian Oceanic Anoxic Event.

Micropropagación de Cissus tiliacea, planta del sur del estado de México

Se micropropagó Cissus tiliacea, recurso fitogenético con potencial agronómico y farmacológico, en los medios de cultivo Murashige-Skoog (MS) y Lloyd y McCown (WPM). En ambos medios se generaron resultados similares para número de brotes, nudos, hojas y raíces adventicias, sólo existió diferencia significativa (p ≤ 0,05) en la formación de callo. Para la multiplicación in vitro se utilizó WPM adicionado con 0; 0,5; 1,0; 1,5 ó 2,0 mg L-1 de benciladenina (BA) y se emplearon tres tipos de segmentos nodales (basal, medio y apical). Las concentraciones de 0 y 0,5 mg L-1 de BA resultaron en un mayor tamaño y desarrollo del explante, además permitieron la formación de 1,2 a 1,6 raíces por explante. Las concentraciones de 1,5 y 2,0 mg L-1 de BA indujeron la formación de callo. No existió diferencia significativa en las variables evaluadas por efecto del tipo de segmento nodal establecido in vitro. En el enraizamiento, en el medio MS, se evaluaron tres tipos de auxinas: ácido naftalen-1-acético (ANA), ácido indol-3-butírico (AIB) y ácido indol- 3-acético (AIA) a 0,5 mg L-1; el mayor número de raíces secundarias y diámetro de la raíz principal fue inducido por ANA, sin embargo AIB indujo una mayor elongación de la raíz principal. Los resultados del presente trabajo sugieren que el cultivo in vitro de C. tiliacea es una alternativa para su conservación y multiplicación.

Antioxidantes y porfirinas de Adesmia boronioides, Larrea divaricata y Atriplex lampa cultivadas in vitro

Los polifenoles están involucrados en la defensa contra la radiación ultravioleta, en la actividad antioxidante, con un significado evolutivo. En la región patagónica existen plantas nativas de interés medicinal muy valoradas por la herbolaria tradicional de la zona. Se estudió actividad antioxidante y pigmentos en Adesmia boronioides, Larrea divaricata y Atriplex lampa (plántulas enteras, 60 días) micropropagados a partir de semillas estériles, cultivadas en MS suplementado con 6-bencil-amino-purina (2219 μM), ácido naftalén-acético (0,053 μM), 45 μmoles fotón.m-2 .s-1, 16h/8h luz/:oscuridad, 22-24°C, subcultivo: 20 días. A.boronioides presentó entre 1,7 y 3,7 veces mayor contenido de porfirinas respecto de los otros cultivos. Se observó una baja cantidad de clorofila total con disminución de clorofila a a expensas de la b (clorofila a/b:2,98). La actividad de catalasa (EC1.11.1.6) fue la menor de los tres cultivos. El mayor contenido de clorofilas fue encontrado en L. divaricata con un alto contenido de clorofila a (clorofila a/b:21,04) y tuvo 2 a 13 veces más antocianinas que los otros cultivos. A. lampa presentó baja cantidad de clorofila (clorofila a/b:8,53); 4 a 6 veces más polifenoles y 5 a 20 veces mayor actividad de catalasa, respecto de los otros cultivos. Los resultados indican la posibilidad de aplicar estos cultivos in vitro como fuente de metabolitos bioactivos.

Pb isotopes in Cenozoic sediments of ODP Site 177-1090

Nd and Pb isotopic compositions extracted from bulk deep sea sediments have been shown to be robust proxies for deep water circulation as well as weathering provenance and intensity over geologically young time scales. In this study we evaluated ten deep sea samples from Ocean Drilling Program (ODP) site 1090 ranging in age from mid Eocene to early-Miocene to test whether Pb isotopic compositions extracted from geologically older sediments record reliable seawater isotopic ratios and to evaluate the source of the extracted Pb. The sequential extraction protocol used in this study is similar to protocols reported for previous studies and produces acetic acid, hydroxylamine hydrochloride (HH) and residue fractions. Each extracted fraction was analyzed for Pb isotopes, rare earth elements (REEs), and a suite of major elements. Similar 206Pb/204Pb, 207Pb/204Pb, and 208Pb/204Pb ratios are recorded from the acetic acid and HH fractions for ~70-80% of the samples, suggesting that either the acetic acid dissolves Fe-Mn oxides or multiple phases are recording the same seawater isotopic value. Several indirect tests, such as Al mass balance, comparison of Sr isotopes in HH extracts to contemporaneous seawater Sr isotopes, and comparison of Nd isotopic compositions in HH extracts to published fossil fish teeth values, provide evidence that Pb isotopic compositions measured in our bulk HH extracts record bottom water values. The relationship between Pb, Mn and Ca concentrations in HH fractions indicates that Fe-Mn oxides and a Mn-bearing carbonate are the dominant phases contributing seawater Pb. Comparison of REE patterns derived from the HH fraction and total digestions of Fe-Mn nodule standards reveals that the trivalent REEs exhibit patterns consistent with the parent archive, but Ce can be fractionated during extraction. Ratios of REEs also produce unique fields for each fraction and can be used to test the purity of the seawater signal of the extraction protocol. Finally, an initial evaluation of Pb isotopic compositions in fossil fish indicates that this archive is not suitable for bottom water Pb isotope studies.

Composition and origin of sediments at DSDP Site 54-424

The sediments recovered on Deep Sea Drilling Project Leg 54 appear to be mixtures of the normal pelagic sediments of the area and hydrothermally produced manganese and iron phases. The latter are mineralogically and chemically very similar to phases recovered from surficial sampling of the mounds. The hydrothermal nontronite which is approximately 15 meters thick in the three holes is essentially free of carbonate or detrital contaminants. The basal sediments are similar to the carbonate oozes presently being deposited in the region, but are enriched in Mn and Fe. This enrichment appears to be the result of hydrothermal deposition that took place at or near the spreading center and may not be associated with the mounds formation. Three different hypotheses for the formation of the nontronite layer and the mounds deposits are considered. An initial deposition of a widespread nontronite layer and subsequent diapiric-like movement of the layer into carbonates could account for the observed stratigraphy; however, if this be correct, analogous deposits should be present in other DSDP sites. The second hypothesis - replacement of the normal sediments by nontronite - may be feasible, but the high purity of the nontronite requires dissolution and removal of refractory elements. The third hypothesis, metal deposition in an advancing oxidation gradient, is compatible with submersible observations of the mounds; however, it can account only for the high purity of the nontronite by very rapid deposition of the hydrothermal phases.

Geochemistry of ODP Sites 121-758 and 121-757

Nd isotopes are useful tracers for paleoceanography due to the short Nd residence time in seawater and the large differences between the isotopic signatures of various geological reservoirs. Therefore, ?Nd variations reflect the geological history of individual oceanic basins. Using a differential dissolution technique, which extracts Nd isotopes of seawater trapped in MnO2 coatings and carbonates in marine sediment, we measured almost two hundred samples from ODP Sites 758 and 757 in the Northern Bay of Bengal covering the last 4 Ma. For the first time, we have shown a covariation between epsilon-Nd and d18O over at least the last 800 ka. We also show that from 4 Ma to 2.6 Ma, epsilon-Nd is almost constant and starts to fluctuate at 2.6 Ma when northern glaciations increased. From 2.6 Ma to 1 Ma the fluctuation period is close to 40 ka while from 1 Ma to present it is dominantly 100 ka. We attribute these findings to mixing between Himalayan river water (that ultimately originates as Indian summer monsoon rain) and normal Bay of Bengal seawater. Previous studies on seawater, using epsilon-Nd, d18O analyzed on planktonic foraminifera and sedimentary data, can be integrated into this model. A simple quantitative binary mixing model suggests that the summer monsoon rain was more intense during interglacial than glacial periods. During last glacial episode, the monsoon trajectory was deviated to the east. At a large scale, the Indian monsoon is fully controlled by the variations in Northern Hemisphere climate but with a complex response function to this forcing. Our study clearly establishes the large potential of Nd isotope data to evaluate the hydrological river regime during the Quaternary and its relationship with climate fluctuations, particularly when the sediment archive is sampled close to sediment sources.

Composition of sediments from the north-west African continental margin

Entlang dreier Profile vom NW-afrikanischen Kontinentalrand wurden Oberflächensedimente aus Wassertiefen zwischen 39m und 1514m auf ihre Zusammensetzung der Sandfraktion, auf ihre Gehalte an Karbonat und organischer Substanzen sowie auf ihre mineralogische Zusammensetzung hin untersucht. 1) Die auf dem Schelf und dem oberen Hang abgelagerten Sedimente (<500m) zeichnen sich durch hohe Sandgehalte (>70%) und durch hohe Grob/Fein-Verhältnisse aus. Unterhalb dieses Bereiches nimmt der Einfluß von Strömungen, die die Ablagerung von wesentlichen Mengen an Feinmaterial oberhalb 500m verhindern, ab, wie die starke Abnahme des Sandgehaltes, des Quarz/Glimmer und des Grob/Fein-Verhältnisses zeigen. Die Sedimente aus diesen Wassertiefen werden zum großen Teil aus Partikeln der Siltfraktion aufgebaut. Mit zunehmender Tiefe ist auch eine Zunahme der Tonfraktion zu beobachten, wobei höhere Tonanteile (>10%) erst in Tiefen unterhalb von 1200m auftreten. 2) Die quantitative Komponentenanalyse der Sandfraktion zeigt, daß der karbonatische Anteil fast ausschließlich biogener Herkunft ist. Er besteht zum wesentlichen Teil aus planktonischen Komponenten, vorwiegend Foraminiferen und mengenmäßig nur sehr untergeordnet auftretenden Pteropoden. Das opalkieselige Plankton (Diatomeen, Radiolarien) ist nur in geringen Mengen in den untersuchten Proben vorhanden. Auch das Benthos stellt nur eine untergeordnete Komponente der Sandfraktion dar. Vor allem der Anteil von Foraminiferen und Mollusken nimmt mit zunehmender Wassertiefe relativ deutlich ab. Die übrigen benthonischen Komponenten sind im Sediment nur in geringen Anteilen vertreten. 3) Hauptsedimentbildner im Profil Nouakchott sind die nichtbiogenen, terrigen-detritischen Sandkomponenten. Sie bestehen vorwiegend aus Quarz und mit zunehmender Wassertiefe aus Kotpillen bzw. Kotpillenaggregaten. Je nach Tiefe treten vor allem Glimmer (>1000m) und Glaukonit (<800m) hinzu. Die restlichen Komponenten treten nur gelegentlich und in äußerst geringen Mengen im rezenten Oberflächensediment auf. 4) Quarz wird als Windstaub mit dem NE-Passat und vor allem durch den "Harmattan" aus der Sahara heraustransportiert und vorwiegend über dem Schelfbereich sedimentiert. Windstaubmaterial besteht primär weitgehend aus Siltkorngrößen, die vor Nouakchott über die Schelfkante hinaustransportiert werden und zu einer Grobsiltanreicherung am mittleren Hang führen. 5) Das Verhältnis zwischen den karbonatischen Biogenkomponenten und den nichtbiogenen Partikeln spiegelt sich deutlich in der Karbonatverteilung sowohl des Gesamtsedimentes als auch der Sandfraktion wider. Relativ hohe Karbonatgehalte vor Cap Leven im Norden stehen sehr geringen Anteilen von Nouakchott gegenüber. Mit zunehmender Wassertiefe ist eine deutliche Abnahme des Karbonatanteils zu verfolgen. 6) Die Tatsache, daß das Profil Cap Blanc im Bereich des ganzjährigen Auftriebs liegt, spiegelt sich nicht in der Zusammensetzung der Sandfraktion wider. Südlich der Zone des ganzjährigen Auftriebs weisen verschiedene Parameter (Radiolarien, Diatomeen, Verhältnis von Radiolarien zu planktonischen Foraminiferen, Benthos/Plankton-Verhältnis der Foraminiferen) trotz abnehmender Auftriebsintensität eher steigende Werte auf. Dies ist wesentlich auf eine infolge des Nährstoffeintrages durch Flußzufuhr bedingte Verschiebung der maximalen Primärproduktion weit in südliche Richtung zurückzuführen. 7) In den aufgeführten Parametern zeigen sich von Profil zu Profil sehr deutliche fazielle Unterschiede, obwohl der großklimatische Hintergrund im gesamten Untersuchungsgebiet etwa gleich ist. Vor Cap Leven bildet sich eine Fazies, die im wesentlichen aus planktonischen Foraminiferen besteht, während das Sediment vor Nouakchott zum überwiegenden Teil aus nichtbiogenen Komponenten aufgebaut wird. Im Übergangsbereich vor Cap Blanc bildet sich eine Mischfazies, die keinerlei Prägung durch das Auftriebsgeschehen erhält. Die Ursachen dieser faziellen Unterschiede werden auf fehlenden Terrigeneinfluß vor Cap Leven einerseits und hohe Terrigenanlieferung vor Nouakchott andererseits zurückgeführt. 8) Die Zusammensetzung und Verteilung der rezenten Grobfraktionssedimente am Kontinentalrand vor Nw-Afrika wird somit im wesentlichen als Ergebnis einer Überprägung der Biogenanlieferung durch nichtbiogene Komponenten angesehen. Wesentlicher steuernder Faktor ist demnach das hier vorherrschende Windsystem.

Iron and phosphorus speciations in DSDP Leg 92 sediments

We present a detailed study of the co-diagenesis of Fe and P in hydrothermal plume fallout sediments from ~19°S on the southern East Pacific Rise. Three distal sediment cores from 340-1130 km from the ridge crest, collected during DSDP Leg 92, were analysed for solid phase Fe and P associations using sequential chemical extraction techniques. The sediments at all sites are enriched in hydrothermal Fe (oxyhydr)oxides, but during diagenesis a large proportion of the primary ferrihydrite precipitates are transformed to the more stable mineral form of goethite and to a lesser extent to clay minerals, resulting in the release to solution of scavenged P. However, a significant proportion of this P is retained within the sediment, by incorporation into secondary goethite, by precipitation as authigenic apatite, and by readsorption to Fe (oxyhydr)oxides. Molar P/Fe ratios for these sediments are significantly lower than those measured in plume particles from more northern localities along the southern East Pacific Rise, and show a distinct downcore decrease to a depth of ~12 m. Molar P/Fe ratios are then relatively constant to a depth of ~35 m. The Fe and P speciation data indicate that diagenetic modification of the sediments is largely complete by a depth of 2.5 m, and thus depth trends in molar P/Fe ratios can not solely be explained by losses of P from the sediment by diffusion to the overlying water column during early diagenesis. Instead, these sediments are likely recording changes in dissolved P concentrations off the SEPR, possibly as a result of redistribution of nutrients in response to changes in oceanic circulation over the last 10 million years. Furthermore, the relatively low molar P/Fe ratios observed throughout these sediments are not necessarily solely due to losses of scavenged P by diffusion to the overlying water column during diagenesis, but may also reflect post-depositional oxidation of pyrite originating from the volatile-rich vents of the southern East Pacific Rise. This study suggests that the molar P/Fe ratio of oxic Fe-rich sediments may serve as a proxy of relative changes in paleoseawater phosphate concentrations, particularly if Fe sulfide minerals are not an important component during transport and deposition.

Nd-Sr isotopic composition of foraminifera and bulk sediments

We present new isotopic data for sedimentary planktonic foraminifera, as well as for potential water column and sedimentary sources of neodymium (Nd), which confirm that the isotopic composition of the foraminifera is the same as surface seawater and very different from deep water and sedimentary Nd. The faithfulness with which sedimentary foraminifera record the isotopic signature of surface seawater Nd is difficult to explain given their variable and high Nd/Ca ratios, ratios that are often sedimentary foraminifera, ratios that are often much higher than is plausible for direct incorporation within the calcite structure. We present further data that demonstrate a similarly large range in Nd/Ca ratios in plankton tow foraminifera, a range that may be controlled by redox conditions in the water column. Cleaning experiments reveal, in common with earlier work, that large amounts of Nd are released by cleaning with both hydrazine and diethylene triamine penta-acetic acid, but that the Nd released at each step is of surface origin. While further detailed studies are required to verify the exact location of the surface isotopic signature and the key controls on foraminiferal Nd isotope systematics, these new data place the use of planktonic foraminifera as recorders of surface water Nd isotope ratios, and thus of variations in the past supply of Nd to the oceans from the continents via weathering and erosion, on a reasonably sure footing.

Iron and carbon geochemistry of sediment core GeoB1401-4

Iron speciation was determined in hemiplegic sediments from a high productivity area to investigate systematically the early diagenetic reactivity of Fe. A combination of various leaching agents (1 M HCI, dithionite buffered in citrate/acetic acid, HF/H2SO4, acetic Cr(II)) was applied to sediment and extracted more than 80% of total Fe. Subsequent Fe species determination defined specific mineral fractions that are available for Fe reduction and fractions formed as products of Fe diagenesis. To determine the Fe speciation of (sheet) silicates we explored an extraction procedure (HF/H2SO4) and verified the procedure by application to standard rocks. Variations of Fe speciation of (sheet) silicates reflect the possible formation of Fe-bearing silicates in near surface sediments. The same fraction indicates a change in the primary input at greater depth, which is supported by other parameters. The Fe(II)/ Fe(III) -ratio of total sediment determined by extractions was compared with Mössbauer-spectroscopy ] at room temperature and showed agreement within 10%. M6ssbauer-spectroscopy indicates the occurrence of siderite in the presence of free sulfide and pyrite, supporting the importance of microenvironments during mineral formation. The occurrence of other Fe(II) bearing minerals such as ankerite (Ca-, Fe-, Mg-carbonate) can be presumed but remains speculative.

Chemical characterization of marine sub-micrometer aerosol particles during the MERIAN cruise MSM18/3 from the Cape Verde island Sao Vicente to Gabun (Atlantic Ocean)

Sub-micron marine aerosol particles (PM1) were collected during the MERIAN cruise MSM 18/3 between 22 June 2011 and 21 July 2011 from the Cape Verde island Sao Vicente to Gabun crossing the tropical Atlantic Ocean and passing equatorial upwelling areas. According to air mass origin and chemical composition of the aerosol particles, three main regimes could be established. Aerosol particles in the first part of the cruise were mainly of marine origin, in the second part was marine and slightly biomass burning influenced (increasing tendency) and in the in last part of the cruise, approaching the African mainland, biomass burning influences became dominant. Generally aerosols were dominated by sulfate (caverage = 1.99 µg/m**3) and ammonium ions (caverage = 0.72 µg/m**3) that are well correlated and slightly increasing along the cruise. High concentrations of water insoluble organic carbon (WISOC) averaging 0.51 µg/m**3 were found probably attributed to the high oceanic productivity in this region. Water soluble organic carbon (WSOC) was strongly increasing along the cruise from concentrations of 0.26 µg/m**3 in the mainly marine influenced part to concentrations up to 3.3 µg/m**3 that are probably caused by biomass burning influences. Major organic constituents were oxalic acid, methansulfonic acid (MSA) and aliphatic amines. MSA concentrations were quite constant along the cruise (caverage = 43 ng/m**3). While aliphatic amines were more abundant in the first mainly marine influenced part with concentrations of about 20 ng/m**3, oxalic acid showed the opposite pattern with average concentrations of 12 ng/m**3 in the marine and 158 ng/m**3 in the biomass burning influenced part. The alpha dicarbonyl compounds glyoxal and methylglyoxal were detected in the aerosol particles in the low ng/m**3 range and followed oxalic acid closely. MSA and aliphatic amines accounted for biogenic marine (secondary) aerosol constituents whereas oxalic acid and the alpha dicarbonyl compounds were believed to result mainly from biomass burning. N-alkane concentrations increased along the cruise from 0.81 to 4.66 ng/m**3, PAHs and hopanes were abundant in the last part of the cruise (caverage of PAHs = 0.13 ng/m**3, caverage of hopanes = 0.19 ng/m**3). Levoglucosan was identified in several samples of the last part of the cruise in concentrations around 2 ng/m**3, pointing to (aged) biomass burning influences. The investigated organic compounds could explain 9.5% of WSOC in the mainly marine influenced part (dominating compounds: aliphatic amines and MSA) and 2.7% of WSOC in the biomass burning influenced part (dominating compound: oxalic acid) of the cruise.

Characterization cement pastes degraded in lanoratory solutions and physiochemical parameters employed for modeling the process

Previously degradation studies carried out, over a number of different mortars by the research team, have shown that observed degradation does not exclusively depend on the solution equilibrium pH, nor the aggressive anions relative solubility. In our tests no reason was found that could allow us to explain, why same solubility anions with a lower pH are less aggressive than others. The aim of this paper is to study cement pastes behavior in aggressive environments. As observed in previous research, this cement pastes behaviors are not easily explained only taking into account only usual parameters, pH, solubility etc. Consequently the paper is about studying if solution physicochemical characteristics are more important in certain environments than specific pH values. The paper tries to obtain a degradation model, which starting from solution physicochemical parameters allows us to interpret the different behaviors shown by different composition cements. To that end, the rates of degradation of the solid phases were computed for each considered environment. Three cement have been studied: CEM I 42.5R/SR, CEM II/A-V 42.5R and CEM IV/B-(P-V) 32.5 N. The pastes have been exposed to five environments: sodium acetate/acetic acid 0.35 M, sodium sulfate solution 0.17 M, a solution representing natural water, saturated calcium hydroxide solution and laboratory environment. The attack mechanism was meant to be unidirectional, in order to achieve so; all sides of cylinders were sealed except from the attacked surface. The cylinders were taking out of the exposition environments after 2, 4, 7, 14, 30, 58 and 90 days. Both aggressive solution variations in solid phases and in different depths have been characterized. To each age and depth the calcium, magnesium and iron contents have been analyzed. Hydrated phases evolution studied, using thermal analysis, and crystalline compound changes, using X ray diffraction have been also analyzed. Sodium sulphate and water solutions stabilize an outer pH near to 8 in short time, however the stability of the most pH dependent phases is not the same. Although having similar pH and existing the possibility of forming a plaster layer near to the calcium leaching surface, this stability is greater than other sulphate solutions. Stability variations of solids formed by inverse diffusion, determine the rate of degradation.

Occurrence and formation of indole-3-acetamide in Arabidopsis thaliana

An HPLC/GC–MS/MS technique (high-pressure liquid chromatography in combination with gas chromatography–tandem mass spectrometry) has been worked out to analyze indole-3-acetamide (IAM) with very high sensitivity, using isotopically labelled IAM as an internal standard. Using this technique, the occurrence of IAM in sterile-grown Arabidopsis thaliana (L.) Heynh. was demonstrated unequivocally. In comparison, plants grown under non-sterile conditions in soil in a greenhouse showed approximately 50% higher average levels of IAM, but the differences were not statistically significant. Thus, microbial contributions to the IAM extracted from the tissue are likely to be minor. Levels of IAM in sterile-grown seedlings were highest in imbibed seeds and then sharply declined during the first 24 h of germination and further during early seedling development to remain below 20–30 pmol g–1 fresh weight throughout the rosette stage. The decline in indole-3-aetic acid (IAA) levels during germination was paralleled by a similar decline in IAM levels. Recombinant nitrilase isoforms 1, 2 and 3, known to synthesize IAA from indole-3-acetonitrile, were shown to produce significant amounts of IAM in vitro as a second end product of the reaction besides IAA. NIT2 was earlier shown to be highly expressed in developing and in mature A. thaliana embryos, and NIT3 is the dominantly active gene in the hypocotyl and the cotyledons of young, germinating seedlings. Collectively, these data suggest that the elevated levels of IAM in seeds and germinating seedlings result from nitrilase action on indole-3-acetonitrile, a metabolite produced in the plants presumably from glucobrassicin turnover.

Geochemical fingerprints and controls in the sediments of an urban river: River Manzanares, Madrid (Spain)

The geochemical fingerprint of sediment retrieved from the banks of the River Manzanares as it passes through the City of Madrid is presented here. The river collects the effluent water from several Waste Water Treatment (WWT) plants in and around the city, such that, at low flows, up to 60% of the flow has been treated. A total of 18 bank-sediment cores were collected along the course of the river, down to its confluence with the Jarama river, to the south–east of Madrid. Trace and major elements in each sample were extracted following a double protocol: (a) “Total” digestion with HNO3, HClO4 and HF; (b) “Weak” digestion with sodium acetate buffered to pH=5 with acetic acid, under constant stirring. The digests thus obtained were subsequently analysed by ICP-AES, except for Hg which was extracted with aqua regia and sodium chloride-hydroxylamine sulfate, and analysed by Cold Vapour-AAS. X-ray diffraction was additionally employed to determine the mineralogical composition of the samples. Uni- and multivariate analyses of the chemical data reveal the influence of Madrid on the geochemistry of Manzanares' sediments, clearly manifested by a marked increase in the concentration of typically “urban” elements Ag, Cr, Cu, Pb and Zn, downstream of the intersection of the river with the city's perimeter. The highest concentrations of these elements appear to be associated with illegal or accidental dumping of waste materials, and with the uncontrolled incorporation of untreated urban runoff to the river. The natural matrix of the sediment is characterised by fairly constant concentrations of Ce, La and Y, whereas changes in the lithology intersected by the river cause corresponding variations in Ca–Mg and Al–Na contents. In the final stretch of the river, the presence of carbonate materials seems to exert a strong geochemical control on the amount of Zn and, to a lesser extent, Cu immobilised in the sediments. This fact suggests that a variable but significant proportion of both elements may be susceptible to reincorporation in the aqueous phase under realistic environmental conditions.