Living Snow Fences, 2006

Blowing snow can cause significant problems for mobility and safety during winter weather in three distinct ways. It may drift onto the road, thus requiring almost continuous plowing while the wind is blowing (which may occur when a given winter storm is over). Snow may drift onto wet pavement (perhaps caused by ice control chemicals) and dilute out the chemicals on the road, creating ice on the road. And sufficient blowing snow can cause a major deterioration in visibility on the road, a factor which has been shown to be significant in winter crashes. The problem of blowing snow can be very effectively addressed by creating a snow storage device upwind of the road that requires protection from snow drifting. Typically, these storage devices are fences. Extensive design guidance exists for the required height and placement of such fences for a given annual snowfall and given local topography. However, the design information on the placement of living snow fences is less complete. The purpose of this report is to present the results of three seasons of study on using standing corn as snow fences. In addition, the experience of using switch grass as a snow storage medium is also presented. On the basis of these experimental data, a design guide has been developed that makes use of the somewhat unique snow storage characteristics of standing corn snow fences. The results of the field tests on using standing corn showed that multiple rows of standing corn store snow rather differently than a traditional wooden snow fence. Specifically, while a traditional fence stores most of the snow downwind from the fence (and thus must be placed a significant distance upwind of the road to be protected, specifically at least 35 times the snow fence height) rows of standing corn store the majority of the snow within the rows. Results from the three winters of testing show that the standing corn snow fences can store as much snow within the rows of standing corn as a traditional fence of typical height for operation in Iowa (4 to 6 feet) can store. This finding is significant because it means that the snow fences can be placed at the edge of the farmer’s field closest to the road, and still be effective. This is typically much more convenient for the farmer and thus may mean that more farmers would be willing to participate in a program that uses standing corn than in traditional programs. ii On the basis of the experimental data, design guidance for the use of standing corn as a snow storage device in Iowa is given in the report. Specifically, it is recommended that if the fetch in a location to be protected is less than 5,000 feet, then 16 rows of standing corn should be used, at the edge of the field adjacent to the right of way. If the fetch is greater than 5,000 feet, then 24 rows of standing corn should be used. This is based on a row spacing of 22 inches. Further, it should be noted that these design recommendations are ONLY for the State of Iowa. Other states of course have different winter weather and without extensive further study, it cannot be said that these guidelines would be effective in other locations with other winter conditions.

G-1 Appeal Activity in the Public Assistance Programs, February 2007

G-1 - Appeal Activity in the Public Assistance Programs - February 2007

Developing a Simple and Rapid Test for Monitoring the Heat Evolution of Concrete Mixtures for Both Laboratory and Field Applications, January 2006

Various test methods exist for measuring heat of cement hydration; however, most current methods require expensive equipment, complex testing procedures, and/or extensive time, thus not being suitable for field application. The objectives of this research are to identify, develop, and evaluate a standard test procedure for characterization and quality control of pavement concrete mixtures using a calorimetry technique. This research project has three phases. Phase I was designed to identify the user needs, including performance requirements and precision and bias limits, and to synthesize existing test methods for monitoring the heat of hydration, including device types, configurations, test procedures, measurements, advantages, disadvantages, applications, and accuracy. Phase II was designed to conduct experimental work to evaluate the calorimetry equipment recommended from the Phase I study and to develop a standard test procedure for using the equipment and interpreting the test results. Phase II also includes the development of models and computer programs for prediction of concrete pavement performance based on the characteristics of heat evolution curves. Phase III was designed to study for further development of a much simpler, inexpensive calorimeter for field concrete. In this report, the results from the Phase I study are presented, the plan for the Phase II study is described, and the recommendations for Phase III study are outlined. Phase I has been completed through three major activities: (1) collecting input and advice from the members of the project Technical Working Group (TWG), (2) conducting a literature survey, and (3) performing trials at the CP Tech Center’s research lab. The research results indicate that in addition to predicting maturity/strength, concrete heat evolution test results can also be used for (1) forecasting concrete setting time, (2) specifying curing period, (3) estimating risk of thermal cracking, (4) assessing pavement sawing/finishing time, (5) characterizing cement features, (6) identifying incompatibility of cementitious materials, (7) verifying concrete mix proportions, and (8) selecting materials and/or mix designs for given environmental conditions. Besides concrete materials and mix proportions, the configuration of the calorimeter device, sample size, mixing procedure, and testing environment (temperature) also have significant influences on features of concrete heat evolution process. The research team has found that although various calorimeter tests have been conducted for assorted purposes and the potential uses of calorimeter tests are clear, there is no consensus on how to utilize the heat evolution curves to characterize concrete materials and how to effectively relate the characteristics of heat evolution curves to concrete pavement performance. The goal of the Phase II study is to close these gaps.

G-1 Appeal Activity in the Public Assistance Programs, April 2007

G-1 - Appeal Activity in the Public Assistance Programs - April 2007

G-1 Appeal Activity in the Public Assistance Programs, March 2007

G-1 - Appeal Activity in the Public Assistance Programs - March 2007

Does Prison Substance Abuse Treatment Reduce Recidivism?Performance Audit Report Iowa Department of Corrections Licensed Substance Abuse Programs, May 25, 2007

The Iowa Department of Corrections faces a growing prison population expected to quickly exceed current capacities. Additionally, nine out of every ten offenders have a history of alcohol or drug problems often both. Research suggests that alcohol and drugs lead to criminal behavior, which lead offenders right back to prison creating a vicious circle and placing a financial and societal burden on the state. However, research also shows that substance abuse treatment can minimize criminal behavior, and offers a way to shut the revolving prison door. Substance abuse programming attempts to change offender thinking patterns and behavior in order to facilitate re-entry back into the community, lessen substance abuse relapse and reduce recidivism. Yet nearly 60% of offenders with identified needs are not treated, and many lacking treatment are high risk. Additionally, the percentage of offenders returning to prison varies significantly from program to program and some programs can not show they have reduced recidivism when compared to offender groups with substance abuse problems and receiving no treatment at all. All of which minimize the effect substance Abuse programming has in curbing prison population growth and reducing crime.

Limited clinical benefit of minority K103N and Y181C-variant detection in addition to routine genotypic resistance testing in antiretroviral therapy-naive patients.

OBJECTIVE: The presence of minority nonnucleoside reverse transcriptase inhibitor (NNRTI)-resistant HIV-1 variants prior to antiretroviral therapy (ART) has been linked to virologic failure in treatment-naive patients. DESIGN: We performed a large retrospective study to determine the number of treatment failures that could have been prevented by implementing minority drug-resistant HIV-1 variant analyses in ART-naïve patients in whom no NNRTI resistance mutations were detected by routine resistance testing. METHODS: Of 1608 patients in the Swiss HIV Cohort Study, who have initiated first-line ART with two nucleoside reverse transcriptase inhibitors (NRTIs) and one NNRTI before July 2008, 519 patients were eligible by means of HIV-1 subtype, viral load and sample availability. Key NNRTI drug resistance mutations K103N and Y181C were measured by allele-specific PCR in 208 of 519 randomly chosen patients. RESULTS: Minority K103N and Y181C drug resistance mutations were detected in five out of 190 (2.6%) and 10 out of 201 (5%) patients, respectively. Focusing on 183 patients for whom virologic success or failure could be examined, virologic failure occurred in seven out of 183 (3.8%) patients; minority K103N and/or Y181C variants were present prior to ART initiation in only two of those patients. The NNRTI-containing, first-line ART was effective in 10 patients with preexisting minority NNRTI-resistant HIV-1 variant. CONCLUSION: As revealed in settings of case-control studies, minority NNRTI-resistant HIV-1 variants can have an impact on ART. However, the implementation of minority NNRTI-resistant HIV-1 variant analysis in addition to genotypic resistance testing (GRT) cannot be recommended in routine clinical settings. Additional associated risk factors need to be discovered.

Relationship between the users' contact time in educational programs on diabetes mellitus and self-care skills and knowledge

Abstract OBJECTIVE Check the relationship between the users' contact time in educational programs and self-care and knowledge variables in diabetes mellitus. METHOD A longitudinal study with a quantitative approach with the participation, in the initial phase, of 263 users linked to Basic Health Units in Belo Horizonte, Brazil during the years 2012 and 2013. The data were collected with respect to the total contact time of the users' participation in the educational program as regards knowledge and self-care in acquired diabetes mellitus. The data were analyzed using the Student t-test for comparison of means, considering a 0.05 significance level. RESULTS The final sample included 151 users. The analysis showed that the improvement in self-care scores was statistically higher during an educational intervention of eight hours or more (p-value <0.05). In relation to the scores for knowledge, there was a statistically significant improvement at the end of the educational program. It was not possible to identify a value for the contact time from which there was an increase in mean scores for the ability of knowledge. CONCLUSION To improve the effectiveness of the promotion of skills related to knowledge and self-care in diabetes mellitus, it is necessary to consider the contact time as a relevant factor of the educational program.

G-1 Appeal Activity in the Public Assistance Programs, May 2007

G-1 - Appeal Activity in the Public Assistance Programs - May 2007

Audit report on the Iowa Water Pollution Control Works Financing Program (Clean Water Program) and the Iowa Drinking Water Facilities Financing Program (Drinking Water Program), joint programs of the Iowa Finance Authority and the Iowa Department of Natural Resources, for the year ended June 30, 2006

Audit report on the Iowa Water Pollution Control Works Financing Program (Clean Water Program) and the Iowa Drinking Water Facilities Financing Program (Drinking Water Program), joint programs of the Iowa Finance Authority and the Iowa Department of Natural Resources, for the year ended June 30, 2006

Report on the Early Out Incentive (EOI) programs, including a Buy Out Program, for the period November 20, 2001 through February 28, 2006

Report on the Early Out Incentive (EOI) programs, including a Buy Out Program, for the period November 20, 2001 through February 28, 2006

Are rules-based government programs shielded from special-interest politics? Evidence from revenue-sharing transfers in Brazil

Manipulation of government finances for the benefit of narrowly defined groups is usuallythought to be limited to the part of the budget over which politicians exercise discretion inthe short run, such as earmarks. Analyzing a revenue-sharing program between the centraland local governments in Brazil that uses an allocation formula based on local population estimates,I document two main results: first, that the population estimates entering the formulawere manipulated and second, that this manipulation was political in nature. Consistent withswing-voter targeting by the right-wing central government, I find that municipalities withroughly equal right-wing and non-right-wing vote shares benefited relative to opposition orconservative core support municipalities. These findings suggest that the exclusive focus ondiscretionary transfers in the extant empirical literature on special-interest politics may understatethe true scope of tactical redistribution that is going on under programmatic disguise.

Sistemática, filogenia e distribuição geográfica das espécies sul-americanas de Centris (Paracentris) Cameron, 1903 e de Centris (Penthemisia) Moure, 1950, incluindo uma análise filogenética do "grupo Centris" sensu Ayala, 1998 (Hymenoptera, Apoidea, Centridini)

Systematics, phylogeny and geographical distribution of the South American species of Centris (Paracentris) Cameron, 1903, and Centris (Penthemisia) Moure, 1950, including a phylogenetic analysis of the "Centris group" sensu Ayala, 1998 (Hymenoptera, Apoidea, Centridini). A cladistic analysis with the objective of testing the hypothesis of monophily of Centris (Paracentris) Cameron, 1903, and of studying its phylogenetic relationships with the other subgenera that belong to the Centris group, sensu Ayala, 1998, and the relationships among the species that occur in South America, is presented. Centris (Paracentris) is a group of New World bees of amphitropical distribution, especially diversified in the Andes and in the xeric areas of South and North America. Thirty-one species were included in the analysis, four considered as outgroup, and 49 characters, all from external morphology and genitalia of adult specimens. Parsimony analyses with equal weights for the characters and successive weighting were performed with the programs NONA and PAUP, and analyses of implied weighting with the program PeeWee. The strict consensus among the trees obtained in all the analyses indicates that C. (Paracentris), as previously recognized, is a paraphyletic group. In order to eliminate that condition, the subgenera C. (Acritocentris), C. (Exallocentris) and C. (Xerocentris), all described by SNELLING (1974) are synonymized under C. (Paracentris). The subgenus C. (Penthemisia) Moure, 1950, previously considered a synonym of C. (Paracentris), is reinstated, but in a more restricted sense than originally proposed and with the following species: Centris brethesi Schrottky, 1902; C. buchholzi Herbst, 1918; C. chilensis (Spinola, 1851), C. mixta mixta Friese, 1904, and C. mixta tamarugalis Toro & Chiappa, 1989. Centris mixta, previously recognized as the only South American species of the subgenus C. (Xerocentris), a group supposedly amphitropical, came out as the sister-species of C. buchholzi. The following South American species were recognized under Centris (Paracentris): Centris burgdorfi Friese, 1901; C. caelebs Friese, 1900; C. cordillerana Roig-Alsina, 2000; C. euphenax Cockerell, 1913; C. flavohirta Friese, 1900; C. garleppi (Schrottky, 1913); C. klugii Friese, 1900; C. lyngbyei Jensen-Haarup, 1908; C. mourei Roig-Alsina, 2000; C. neffi Moure, 2000; C. nigerrima (Spinola, 1851); C. toroi sp. nov.; C. tricolor Friese, 1900; C. unifasciata (Schrottky, 1913), and C. vogeli Roig-Alsina, 2000. The relationships among the subgenera of the "Centris group" were: (Xanthemisia (Penthemisia (Centris s. str. - Paracentris))). Centris xanthomelaena Moure & Castro 2001, an endemic species of the Caatinga and previously considered a C. (Paracentris), came out as the sister group of C. (Centris) s. str. A new species of C. (Paracentris) from Chile is described: Centris toroi sp. nov. Lectotypus designations and redescriptions are presented for Centris burgdorfi, C. caelebs, C. lyngbyei, C. tricolor, C. autrani Vachal, 1904 and C. smithii Friese, 1900. New synonyms proposed: C. buchholzi Herbst, 1918 = Centris wilmattae Cockerell, 1926 syn. nov.; C. caelebs Friese, 1900 = Paracentris fulvohirta Cameron, 1903. The female of C. vogeli Roig-Alsina, 2000 and the male of C. xanthomelaena are described.

G-1 Appeal Activity in the Public Assistance Programs, June 2007

G-1 Appeal Activity in the Public Assistance Programs, June 2007