Combinación de sistemas de flujo de baja y alta presion para la determinacion de Mg, Ca y Sr en salmueras por espectrofotometria de absorcion atomica con llama

This article describes the combination of low- and high-pressure flow systems for the determination of Magnesium, Calcium and Strontium by flame atomic absorption spectrometry (FAAS). In the low-pressure system a short C-18 RP column (length 0,5 cm) was utilized for the preconcentration/matrix separation step, xylenol orange was used as chelating agent and tetrabutylamonium acetate for ion pair formation. The hydraulic high pressure nebulization (HHPN) was used for sample transport and sample introduction in the high pressure system. The repeatabilities and detection limits for Mg, Ca and Sr were determined and compared with those obtained by pneumatic nebulization (PN). The results show that the detection limits obtained using the HHPN for Mg, Ca and Sr are between 1.5 to 2 times better than those obtained by PN when the signal transient was measured in area. The system presented a sampling frequency of 130 h-1 for direct determination of Mg, Ca or Sr in samples of saturated sodium chloride used in the production of chlorine and sodium hydroxide.

Reaction Kinetics and Viscosity Modelling in the Fusion Syntheses of Ca- and Ca/Mg-resinates

Rosin is a natural product from pine forests and it is used as a raw material in resinate syntheses. Resinates are polyvalent metal salts of rosin acids and especially Ca- and Ca/Mg- resinates find wide application in the printing ink industry. In this thesis, analytical methods were applied to increase general knowledge of resinate chemistry and the reaction kinetics was studied in order to model the non linear solution viscosity increase during resinate syntheses by the fusion method. Solution viscosity in toluene is an important quality factor for resinates to be used in printing inks. The concept of critical resinate concentration, c crit, was introduced to define an abrupt change in viscosity dependence on resinate concentration in the solution. The concept was then used to explain the non-inear solution viscosity increase during resinate syntheses. A semi empirical model with two estimated parameters was derived for the viscosity increase on the basis of apparent reaction kinetics. The model was used to control the viscosity and to predict the total reaction time of the resinate process. The kinetic data from the complex reaction media was obtained by acid value titration and by FTIR spectroscopic analyses using a conventional calibration method to measure the resinate concentration and the concentration of free rosin acids. A multivariate calibration method was successfully applied to make partial least square (PLS) models for monitoring acid value and solution viscosity in both mid-infrared (MIR) and near infrared (NIR) regions during the syntheses. The calibration models can be used for on line resinate process monitoring. In kinetic studies, two main reaction steps were observed during the syntheses. First a fast irreversible resination reaction occurs at 235 °C and then a slow thermal decarboxylation of rosin acids starts to take place at 265 °C. Rosin oil is formed during the decarboxylation reaction step causing significant mass loss as the rosin oil evaporates from the system while the viscosity increases to the target level. The mass balance of the syntheses was determined based on the resinate concentration increase during the decarboxylation reaction step. A mechanistic study of the decarboxylation reaction was based on the observation that resinate molecules are partly solvated by rosin acids during the syntheses. Different decarboxylation mechanisms were proposed for the free and solvating rosin acids. The deduced kinetic model supported the analytical data of the syntheses in a wide resinate concentration region, over a wide range of viscosity values and at different reaction temperatures. In addition, the application of the kinetic model to the modified resinate syntheses gave a good fit. A novel synthesis method with the addition of decarboxylated rosin (i.e. rosin oil) to the reaction mixture was introduced. The conversion of rosin acid to resinate was increased to the level necessary to obtain the target viscosity for the product at 235 °C. Due to a lower reaction temperature than in traditional fusion synthesis at 265 °C, thermal decarboxylation is avoided. As a consequence, the mass yield of the resinate syntheses can be increased from ca. 70% to almost 100% by recycling the added rosin oil.

Determinação direta de Ca, Mg, Mn e Zn em amostras de leite de búfala da Ilha de Marajó por espectrometria de absorção atômica com chama (FAAS)

This work proposes an analytical procedure for direct determination of calcium, magnesium, manganese and zinc in buffalo milk by flame atomic absorption spectrometry (FAAS). Samples were diluted with a solution containing 10% (v/v) of water-soluble tertiary amines (CFA-C) at pH 8. For comparison, buffalo milk samples were digested with HNO3 and H2O2. According to a paired t-test, the results obtained in the determination of Ca, Mg, Mn and Zn in digested samples and in 10% (v/v) CFA-C medium were in agreement at a 95% confidence level. The developed procedure is simple, rapid, decrease the possibility of contamination and can be applied for the routine determination of Ca, Mg, Mn and Zn in buffalo milk samples without any difficulty caused by matrix constituents, such as fat content, and particle size distribution in the milk emulsion.

Influence of initial CaO/SiO2 ratio on the hydration of rice husk ash-Ca(OH)2 and sugar cane bagasse ash-Ca(OH)2 pastes

This work presents the results of a study on the hydration of pastes containing calcium hydroxide and either rice husk ash (RHA) or sugar cane bagasse ash (SCBA) in various initial CaO/SiO2 molar ratios. The products of the reactions were characterized by thermal analyses X-ray diffraction, and scanning electron microscopy. In the case of the RHA pastes, the product was composed of CaO-SiO2-H2O (type I C-S-H) or CaO-SiO2-H2O (type II C-S-H) according to the CaO/SiO2 ratio of the mixture. In contrast, in the case of the SBCA pastes, the product was composed primarily of CaO-SiO2-H2O that differed from both the previous types; the product also contained inclusions of calcium aluminate hydrates.

Padrão de distribuição de K+, Ca++, Mg++ e P no solo de um pomar de citros em função da fertirrigação

Em solos tropicais, a distribuição dos nutrientes no solo em função da fertirrigação realizada por meio de irrigação localizada (gotejamento e/ou microaspersão), na cultura de citros, é pouco conhecida. Este trabalho teve por objetivo avaliar os padrões de distribuição de potássio, cálcio, magnésio e fósforo em solo tropical, em função da fertirrigação, aplicada por dois sistemas de irrigação localizada (microaspersão e gotejamento), sendo que o sistema por gotejamento era composto por uma e duas linhas laterais por linha de plantas, e o de microaspersão por apenas uma linha, e com três dotações hídricas (100%, 75% e 50%) da evapotranspiração da cultura (ETc), em um pomar de laranjeira. As fontes de fertilizantes utilizadas na fertirrigação foram o nitrato de amônio (fonte de N), o cloreto de potássio (fonte de K+) e o ácido fosfórico (fonte de P). Observouse que, sob o emissor, nos tratamentos com gotejamento, houve depleção nos teores de Ca++ e Mg++ desde a superfície do solo até 60 cm de profundidade em relação aos teores anteriores às fertirrigações, enquanto os teores de P aumentaram, principalmente na camada de 0 cm a 20 cm. Na microaspersão, esses efeitos não foram observados, ocorrendo distribuição mais homogênea desses nutrientes tanto na direção transversal à linha de plantas quanto em profundidade. As lâminas de irrigação aplicadas por irrigação localizada não interferem na distribuição de K+ aplicado por fertirrigação e do Ca++ e Mg++ no solo em profundidade, porém menores lâminas de irrigação promovem maior concentração de P na camada mais superficial do solo, e lâminas maiores carregam o P para camadas mais profundas.

The first report in Brazil of severe infection caused by community-acquired methicillin-resistant Staphylococcus aureus (CA-MRSA)

Community-acquired methicillin-resistant Staphylococcus aureus (CA-MRSA) is an emergent pathogen in Brazil. However, there are no data on the prevalence of CA-MRSA. We report here the first well-characterized case of severe life-threatening CA-MRSA infection in a child living in Rio de Janeiro city. The patient had many complications including hematogenous osteomyelitis and involvement of multiple sites requiring drainage of soft-tissue abscess, and pleural and pericardial empyema. The MRSA isolates recovered were genotyped using PFGE, SCCmec typing and multilocus sequence typing. Disk diffusion tests were performed following Clinical and Laboratory Standards Institute recommendations. In addition, the presence of Panton-Valentine leukocidin (PVL) was assessed by PCR amplification, using specific primers for lukF-pv (encoding for the F subunit of the PVL). The bacterial isolates were related to the ST30-SCCmecIV lineage (Oceania Southwest Pacific clone), a PVL producer CA-MRSA previously detected in Porto Alegre, RS, Brazil. Also, the isolates analyzed were susceptible to all non-β-lactam antibiotics tested. The present report demonstrates that disseminated CA-MRSA disease is also occurring in Rio de Janeiro. Thus, the empirical treatment of moderate or severe infections suspected of being associated with CA-MRSA needs to be reviewed in order to allow prompt initiation of an effective therapy that also covers these microorganisms.

Influência da adição de íons Ca++ e Mg++ na dureza de géis de concentrado proteíco de soro de leite bovino

Inúmeros estudos vêm sendo realizados com o objetivo de compreender o comportamento das proteínas do Concentrado Protéico de Soro (CPS). A capacidade destas proteínas em formar géis estáveis a temperaturas entre 70ºC e 90ºC, é uma propriedade funcional importante para a confecção de vários produtos alimentícios, tais como: produtos de padaria, cárneos, texturizados e lácteos. A concentração protéica, pH, composição iônica e temperatura podem ser controladas para obter um gel com as características desejadas. Neste trabalho foi investigado o efeito dos íons metálicos bivalentes Ca++ e Mg++, na propriedade de dureza de géis de CPS induzidos termicamente. Dispersões protéicas a 6; 7 e 8% de proteína do CPS a pH 6,3 com 0; 7,5; 15; 30 e 75mm de CaCl2 ou MgCl2 foram aquecidas a 75ºC por 45 min, resfriadas a 4ºC por 12 horas, e os géis avaliados em um texturômetro TA-XT2. Os géis formados com maiores concentrações do sal adicionado obtiveram maiores valores de dureza na faixa estudada. Nas concentrações de 15 a 75mM os valores de dureza dos géis com a adição de CaCl2 foram significativamente maiores (p<0,05) do que com adição de MgCl2. Na concentração de 8% de proteínas do CPS ambos os tratamentos atingem o maior valor de dureza (p<0,05) a 30mM do sal adicionado. O cálcio iônico mostrou ter um importante papel na formação do gel de proteínas do soro.

Charles Clarke Chapman, ca. 1942

Original mounted photograph, signed by the photographer [Hartsook], as well as by C. C. Chapman [Affectionately yours, Father], ca. 1942.

Charles Clarke Chapman, Los Angeles, California, ca. 1895

Studio portrait photograph of Charles Clarke Chapman, Los Angeles, California, ca. 1895

Original Chapman home ranch packing house, Santa Ysabel, California, ca. 1900

Original Chapman home ranch packing house, Santa Ysabel, California, ca. 1900. [copy print]

Frank M. Chapman, Jr. son of Frank M. and Wilhelmina Chapman, Chicago, Illinois, ca. 1891.

Studio portrait of Frank M. Chapman, Jr. son of Frank M. and Wilhelmina Chapman, Chicago, Illinois, ca. 1891.

Grant Chapman, Clarke Chapman, and Frank Chapman Jr., Palmetto Grove, Covina, California, ca. 1915

Left to right: Grant Chapman, Clarke Chapman, and Frank Chapman Jr., sons of Frank Marion and Wilhelmina Zillen Chapman, on a porch at Palmetto Grove, Covina, California, ca. 1915.

Grounds of Palmetto Grove, estate of Frank Marion Chapman, Covina, California, ca. 1915

Grounds of Palmetto Grove, estate of Frank Marion Chapman, Covina, California, ca. 1915.

Samuel James Chapman, ca. 1948

Samuel James Chapman, brother of Charles Clarke Chapman, ca. 1948.