Diagnóstico de distúrbios de tensão em sistemas de distribuição de energia elétrica usando um algoritmo imuno-neural

Pós-graduação em Engenharia Elétrica - FEIS

Pós-processamento de formas de ondas oriundas de descargas atmosféricas no Centro de Estudos de Descargas Atmosféricas e Alta Tensão (CENDAT) – IEE/USP

Atmospheric Discharges are responsible for several lost in the electrical system therefore it´s done studies to find ways to reduce the problem caused by discharges. This branch of engineering is necessary the gathering, stock and analysis of large quantity of data to validate or refuse the many studies produced about it The CENDAT proposed a project to collect data on induced voltages in distribution lines and current waveform of the lightning, but a difficulty that arose was the accumulation of data due to lack of manpower available to catalog all the data collected. Thinking in this difficulty, the engineer Acacio Silva Neto CENDAT´s researcher with trainees began to develop a program to solve this problem. This work keeps the development of this program in order to solve the problem of accumulation of data

Tratamento de águas oleosas oriundas do processo de produção de óleo de dendê utilizando a flotação por ar dissolvido

This study was developed to evaluate the performance of different coagulant and pH dosages by applying the use of Dissolved Air Flotation (FAD) to enable its use in effluent treatment of the extraction process of palm oil. The study was developed in the laboratory, where studies about emulsions stability were made for the production of a synthetic effluent which best suit the characteristics of raw effluent. The synthetic water that would be used in the tests of FAD was produced, once the stability and characterization which best approached the raw wastewater was obtained. Trials tested three coagulant doses, combined with various pH ranges and five upward velocities (Va), finding an optimal range of this combination. Some operating parameters such as time and gradient of rapid mixing (20 s / 1000 s-1), time and gradient flotation (15 min / 60 s-1), chamber pressure saturation (450 kPa) and recirculation rate (20%) were set. In this way, samples were collected for analysis of the removal of turbidity parameters, suspended solids and oils and greases. This one is obtained by a correlation turbidity x oils and greases, referring to the previous analysis. The degree of removal obtained were 73,97% for turbidity, 51,4% for total suspended solids and 86,2% for oils and greases. Removal rates may be increased in later studies, by ranging the velocity gradient and flocculation parameters and the recirculation ratio, and by using lower flotation speeds to these effluent characteristics.

Estudo de melhorias dos painéis de baixa tensão da Faculdade de Engenharia de Guaratinguetá - UNESP

The protection and distribution systems for the electrics equipments are really important for the safety of products, process and final users, for an enterprise or even for a residence. For that, it’s necessary the utilization of low voltage switchboards for controlling the feeding of a charge, avoiding any kind of abnormality that can eventually occur. It’s necessary to pay attention in the cubicles conditions, and always verify if they are in accordance to the norms of the product, verifying also any kind of physical damage for the operator and/or users. In this line, the present graduation work analyses the low voltage switchboards in the college, checking if they are attending the actual standards, suggesting some improvements and later making a simulation of the creation of a new panel that reach all the needing in substitution of this actual, through the software Simaris. Using the research and lecture of norms and regulations for verifying the problems, this way we could register the greatest acting failures. These actions are made for becoming aware to the university about the danger in using electrics equipments without a minimum degree of protection, allowed by the law, and attempting to the urgency in changing this fails

Desenvolvimento de um anteprojeto de um sistema de digitalização da proteção e controle aplicada a uma subestação elétrica industrial de alta tensão

The proposed of scanning of an electrical industrial substation HV is associated with a segment of the Electrotechnical area and aims the study and preliminary application of digital technologies in the protection, control, measurement and automation maneuvers aimed at a Industrial Electrical System typical High Voltage. Well intended to supervision, protection and control of major electrical and thermal quantities involved in a substation, such as voltage levels, current, temperature, power factor, loads of transformers and circuit feeders, status of interlocking devices, switching equipment maneuvers, etc

Avaliação do efeito da temperatura na deslignificação com o oxigênio nas propriedades do papel

The deslignification with oxygen, also denominated pre-O2, consists in a whitening stage, which consists of accomplishing an oxidation of the lignin, and remove it with the alkali, providing a larger earnings in the bleaching of the pulp. The pre-O2 is a process already very established, where a significant part of the cellulose of whitened short fiber produced nowadays suffers deslignification for this method. The conditions of work of this stage contemplate directly in the results of the deslignification level, in the physical, optical and mechanics properties of the pulp, and consequently of the paper, because this is important to know their effects fully. The main variables related to the control of this process are respectively: pressure and oxygen load, alkaline load, consistence, time and temperature, being this last variable was the study focus in this work. The objective of the work was to analyze the effect of the variation of the temperature in the oxygen whitening along every bleaching process of the pulp, refine and in the optical, physics and mechanics properties of the paper. The development of the work was based in four temperature levels (90, 95, 100 and 105°C) combined to two whitening sequences (OD0(E+P)D1P and OAHTD0(E+P)D1P). The results obtained in the oxygen deslignification stage indicated that the elevation of the temperature contemplated in increases of the whiteness, deslignification efficiency and in the viscosity loss allied to the reduction of the selectivity of the process. In the remaining of the whitening, the sequence that included the acid hydrolysis presented values slightly inferior of whiteness, kappa number, viscosity and yield in relation to the other sequence when compared with the samples of same temperatures. Already the physical tests showed that the sequence with acid stage amplifies the values of capillary... (Complete abstract click electronic access below)

Efeito do treinamento físico aeróbio em hipertensos de meia idade e idosos nos valores de consumo máximo de oxigênio

The aim of this study was to investigate whether aerobic capacity (VO2max) would be modified by antihypertensive therapy in elderly and middle-age women after 12 weeks of exercise training. The volunteers were divided in two groups: normotensive (n=14) and hypertensive (n=14). Aerobic exercise was performed for 3 days/week, during 60 minutes, for 12 weeks with an intensity of 50-70% rest heart hate. Anthropometric parameters (weight and height), body fat index, % of fat mass, cardiopulmonary evaluation to calculated VO2max and a cardiovascular evaluation with blood pressure and rest heart hate were evaluated at baseline and after training program. At the end of study abdominal circumference and Borg scale were also evaluated. Our findings showed the aerobic program of 12 weeks was effective to reduce diastolic blood pressure in both groups. Systolic blood pressure was reduced only hypertensive group. No evidences were found the aerobic capacity was affected by hypertensive therapies. In conclusion, the aerobic program for 12 weeks was effective to reduce blood pressure and there was no influence of antihypertensive therapy on the aerobic capacity in this particular population.

Efeito da adição de oxigênio na produção de glicerol quinase pela levedura recombinante de Pichia pastoris

O glicerol é um importante subproduto de processos fermentativos. Em algumas bebidas alcoólicas, como vinhos e vodcas contribuem com seu sabor tornando-a aceitável para o consumidor. Com o incentivo na produção de biocombustíveis, a disponibilidade do glicerol deve aumentar, já que é o principal subproduto gerado na produção do Biodiesel. A sua presença em alguns alimentos, pode identificar presença de microrganismos, já que pode ser uma fonte de carbono para eles. Devido às inúmeras utilizações do glicerol para diversos tipos de indústrias, a dosagem do glicerol se torna cada vez mais importante e rotineira. Isso incentiva novas pesquisas de métodos de doseamento. A enzima GK é presente em vários microrganismos e converte o glicerol em glicerol-3-fosfato. Com a utilização da enzima Glicerol -3- fofato desidrogenase, o glicerol - 3 – fosfato é convertido a di-hidroxi-acetona fosfato com a produção de NADH. Este pode ser quantificado através do espectrofotômetro, tornando-se um rápido e eficiente método para doseamento. A levedura recombinante Pichia pastoris foi escolhida pois foi inserida no seu DNA, o Gene GUT1 que expressa a GK em Saccharomyces cerevisiae. Além disso, a expressão enzimática é extracelular, diminuindo etapas no processo de isolamento da enzima GK. O trabalho consistiu em otimizar a produção de GK expressa pela levedura recombinante Pichia pastoris por meio da adição de oxigênio no biorreator de fermentação em escala de 2,5 L. Os resultados do presente estudo indicam o ponto ótimo de oxigenação em fermentador nos parâmetros estabelecidos é de 2,0 lpm tanto para a produção de enzimática quanto para biomassa formada

Prefácios e notas do tradutor: tensão e acolhimento na relação com o outro

The purpose of this paper is to examine the paratexts, mainly prefaces and notes, written by translators on writings of foreigners' travels in Brazil, with the purpose of evidencing which perspective guided their translations, if the perspective of the foreign author is adopted or if it is that of the domestic reader. The works examined were published by the Brazilian publishing house Companhia Editora Nacional in the Brasiliana Colllection. Most of the translators adopted a welcoming discourse to the author in their prefaces, but their prefaces, translations and notes reveal a certain tension between what they stated and what was effectively done, with moments of rupture in which the author's meanings are questioned and even denied. According to my analysis, this happens because the several forces acting on the translation, the author, the translator and the text to be translated, the languages involved, the reader are not working linearly, but in constant tension. As a result, different perspectives are adopted in different translations, but in the same translation there are moments in which the foreign pole is privileged and moments in which the domestic pole emerges.

Avaliação do envolvimento do receptor dectina-1 na atividade fungicida e na produção de metabólitos do oxigênio por neutrófilos e monócitos humanos desafiados com Paracoccidioides brasiliensis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Alocação de modem PLC utilizando SNR em uma rede elétrica de baixa tensão

Pós-graduação em Engenharia Elétrica - FEIS

Caracterização isotópica do CO2 dissolvido em águas subterrâneas no município de Paulínia, SP

Pós-graduação em Geociências e Meio Ambiente - IGCE

Caracterização do fator de intensidade de tensão em corpos trincados através do método dos elementos finitos

The industry generally has sought materials with high mechanical resistance, low density, thermal stability and corrosion resistance. In the aerospace industry, for example, the use of aluminum alloys, such as Al 2024-T351 and Al 7075-T7351, have become essential. However, the use of these materials often do not resulted in a satisfactory performance of the component, since the presence of cracks can cause total rupture of the component, even with a tension below the yield stress of the material, unexpectedly. In this work, these aluminum alloys were analyzed and samples were modeled by the finite element method. Moreover, in the models were applied two different types of cracks, central and edge crack, a vertical force was applied to result in a tension 70% of the yield stress of the material analyzed. Through stress asymptotic distribution in the region near the crack tip were calculated the values of the stress intensity factors for each crack length, after the stress intensity factors characterized were compared graphically with the values of fracture toughness found in the available literature

Detecção da procedência de plantas psicoativas pelos isótopos estáveis do nitrogênio (15n) e oxigênio (18o)

This research examines the merits of hallucinogenic plants considered and/or psychoactive substances, such as Cannabis sativa and Ipomoea violacea, using the isotope rates of stable isotope of oxygen (18O) and nitrogen (15N), continuing projects already developed by the research group at the Center for Stable Isotope (CIE), which evaluated the isotopes carbon-13. This paper helps in creating a database that we intent to use in evaluation of each plant merit. Through the IRMS (Isotope-Ratio Mass Spectrometry) technique, it has shown that some of the 24 samples of marijuana (Cannabis sativa L.) evaluated were similar to those grown in the regions of Fairbanks and Tanacross Alaska, USA. In turn, the 50 samples of Ipomoea violacea, coming from Botucatu (SP) and Três Lagoas (MS), got their differences detected, in order to clearly identify the discrepancies between their growing regions. Thus, it was possible not only to track the geographical differences between marijuana samples collected from different regions, but also evaluate the isotopic variation of leaf, flower and seed of Ipomoea violacea. With this database, it was possible to determine the origin region of the drug and/or detect where the cultivation was carried out, aiding in the search of the traffic control agencies, such as the Federal Police in Brazil

Algoritmo híbrido neural-imuno aplicado ao diagnóstico de distúrbios de tensão em sistemas de distribuição de energia elétrica

Pós-graduação em Engenharia Elétrica - FEIS