Debris, Roughness and Friction of Stainless Steel Archwires Following Clinical Use

Objective: To investigate the degree of debris, roughness, and friction of stainless steel orthodontic archwires before and after clinical use.Materials and Methods: For eight individuals, two sets of three brackets (n = 16) each were bonded from the first molar to the first premolar. A passive segment of 0.019- x 0.025-inch stainless steel archwire was inserted into the brackets and tied by elastomeric ligature. Debris level (via scanning electron microscopy), roughness, and frictional force were evaluated as-received and after 8 weeks of intraoral exposure. Mann-Whitney, Wilcoxon signed-rank, and Spearman correlation tests were used for statistical analysis at the .05 level of significance.Results: There were significant increases in the level of debris (P = .0004), roughness of orthodontic wires (P = .002), and friction (P = .0001) after intraoral exposure. Significant positive correlations (P < .05) were observed between these three variables.Conclusion: Stainless steel rectangular wires, when exposed to the intraoral environment for 8 weeks, showed a significant increase in the degree of debris and surface roughness, causing an increase in friction between the wire and bracket during the mechanics of sliding. (Angle Orthod. 2010;80:521-527.)

Effect of heat treatment on stainless steel orthodontic wires

This study evaluated the effect of heat treatment on CrNi stainless steel orthodontic archwires. Half of forty archwires of each thickness - 0.014 (0.35 mm), 0.016 (0.40 mm), 0.018 (0.45 mm) and 0.020 (0.50 mm) (totalling 160 archwires) - were subjected to heat treatment while the remainder were not. All of the archwires had their individual thickness measured in the anterior and posterior regions using AutoCad 2000 software before and after compressive and tensile strength testing. The data was statistically analysed utilising multivariance ANOVA at a 5% significance level. All archwires without heat treatment that were subjected to tensile strength testing presented with anterior opening, which was more accentuated in the 0.020 archwires. In the posterior region, the opening produced by the tensile force was more accentuated in the archwires without heat treatment. There was greater stability in the thermally treated archwires, especially those subjected to tensile strength testing, which indicates that the heat treatment of orthodontic archwires establishes a favourable and indispensable condition to preserve the intercanine width.

Influência do horário de colheita sobre o rendimento e composição do óleo essencial de erva-cidreira brasileira [Lippia alba (Mill.) N. E. Br.]

Este trabalho teve como objetivo verificar se o horário de colheita da erva-cidreira brasileira [Lippia alba (Mill.) N. E. Br.], fenotipo carvona-limoneno, tem influência sobre a produção de massa foliar, rendimento e composição do óleo essencial. Foram avaliados cinco horários de colheita quando a cultura estava com 145 dias desde o transplante: 8:00, 10:00, 12:00, 14:00 e 16:00 h com cinco repetições, distribuídos em blocos casualizados. O experimento foi conduzido na Fazenda Experimental Lageado da FCA-UNESP/Botucatu no Setor de Horticultura do Departamento de Produção Vegetal. A colheita foi realizada a 15 cm da superfície do solo e o óleo essencial obtido através de hidrodestilação, em aparelho tipo Clevenger. Levou-se em consideração os fatores agronômicos e o rendimento obtido por hidrodestilação. O óleo essencial foi analisado em cromatógrafo gasoso acoplado a espectrômetro de massas (CG/EM). Os resultados foram submetidos à análise de variância (Teste F) e as médias comparadas pelo teste de Tukey. Não houve diferença estatística para produção de massa foliar, teor de óleo essencial e produtividade de óleo essencial em massa fresca e seca. No entanto, entre os compostos majoritários do óleo essencial das folhas, carvona e limoneno, a melhor produtividade de carvona foi obtida às 10:00 h, em matéria fresca (2,050 L ha-1) e em matéria seca (2,068 L ha-1), e para o limoneno às 16:00 h, em matéria fresca (1,068 L ha-1) e em matéria seca (1,060 L ha-1).

Curva de absorção de água em sementes de atemóia (Annona cherimola Mill. x Annona squamosa L.) cv. Gefner

O presente trabalho teve o objetivo de caracterizar a curva de absorção de água em sementes de atemóia (Annona cherimola Mill x Annona squamosa L.) cv. Gefner, submetidas a três métodos de embebição: sementes submersas em água destilada (MSSA), sementes entre papel de filtro embebido em água destilada acondicionada em caixa tipo gerbox (MPEA) e teste-padrão (MTP), com sementes mantidas em rolo de papel de filtro umedecido em água destilada. O delineamento experimental foi o inteiramente casualizado, com 6 tratamentos e 4 repetições de 25 sementes por parcela, constituídos por três métodos de embebição, empregando-se sementes vivas e mortas. O tempo de embebição entre 27; 34 e 47 horas, nos métodos MTP, MPEA e MSSA, representam indicativo para tratamento de sementes, podendo funcionar como tempo mínimo necessário para embebição em solução com reguladores vegetais. Conclui-se que os métodos que caracterizaram as três fases de absorção de água em sementes de atemóia foram o MTP e MPEA com mudança entre as fases I e II após 27 e 34 horas, respectivamente, atingindo a fase III com 234 horas, o que permite determinar o tempo de imersão para tratamentos pré-germinativos.

Enraizamento de estacas de atemoieira (Annona Cherimola Mill. x A. squamosa L.) cv. Gefner submetidas a tratamento lento e rápido com auxinas

Realizou-se este trabalho, com o objetivo de avaliar o uso de concentrações de diferentes auxinas no enraizamento de estacas de atemoieira (Annona cherimola Mill. x A. squamosa L.) cv. Gefner, empregando-se tratamento lento e rápido. O delineamento experimental empregado foi inteiramente casualizado, em esquema fatorial 3x7 (auxinas x concentrações), com 5 repetições de 12 estacas por parcela, para cada método de aplicação de auxina (lento e rápido). As estacas foram tratadas com os reguladores vegetais, por meio da imersão da base em soluções, contendo IBA, NAA e 2,4-D, durante 24 horas (tratamento lento) nas concentrações 0 (testemunha), 50, 100, 200, 300, 400 e 500 mg L-1 de cada regulador e 5 segundos (tratamento rápido) nas concentrações 0 (testemunha), 500, 1000, 2000, 3000, 4000 e 5000 mg L-1 de cada regulador. As variáveis avaliadas foram: porcentagem de estacas sobreviventes, enraizadas, sobreviventes com calos, comprimento de raiz por estaca, porcentagem de estacas enraizadas com folhas remanescentes, com brotação e com folhas remanescentes e brotação. Para o enraizamento de estacas de atemoieira cv. 'Gefner' conclui-se que, o tratamento lento, com 200 mg L-1 de NAA, proporcionou incremento ao processo, da mesma forma que o tratamento rápido com IBA, independente da concentração.

Indigofera suffruticosa Mill as new source of healing agent: Involvement of prostaglandin and mucus and heat shock proteins

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Temperature effect on dextransucrase production by Leuconostoc mesenteroides FT 045 B isolated from Alcohol and Sugar Mill Plant

Temperature (23 to 31 degrees C) and sucrose concentration ( 3 and 4%) effects on dextransucrase production by Leuconostoc mesenteroides NRRL B 512 ( F) and Leuconostoc mesenteroides FT 045 B were studied. The conditions in all fermentations were: total reaction volume 2 L, 132 rev. min-1, 0.5 vvm and pH 6.0. The optimum temperature for enzyme yield for strain NRRL B 512 ( F) was 23 degrees C, where at 8-h fermentation was possible to achieve 49.3 DSU/mL. When FT 045 B strain was utilized, 3.2 DSU/mL was obtained at temperature 23 to 25 degrees C.

Anatomia do caule de Lycopersicon Esculentum Mill., submetido a diferentes tratamentos com reguladores vegetais

The effects of plant growth regulators GA3 50 mg. L-1, NAA 100 mg. L-1, CCC 1500 mg.L-1 and SADH 3000 mg.L-1 on stem anatomy of Lycopersicon esculentum Mill cv. Ângela Gigante were studied. Two sets of experiments were carried out in greenhouse during two separte periods. Anatomical studies , revealed that growth promotors induced increased xylem thickness and increased the number of tracheary elements while the growth retardants decreased xylem thickness and induced fiber formation.

Effect of citrate ions on the electrochemical behaviour of low-carbon steel in borate buffer solutions

The electrochemical behaviour of cold-rolled low carbon steel was studied on both active and passive potential regions in borate buffer solutions with and without the addition of sodium citrate (NaCit). In the active region anodic charges increased significantly and RCT values decreased with citrate, due to the formation of soluble complexes. In the passive potential region the film formed at +0.4 V in borate buffer solution with and without 0.010 M NaCit is probably enriched by Fe3O4 oxide, while films formed at +0.8 V are probably enriched by gamma-Fe2O3. The equivalent circuit [R-s(R(CT)Q)] fitted all experimental impedance data. (C) 2003 Elsevier Ltd. All rights reserved.

Influence of spraying parameters on the electrochemical behaviour of HVOF thermally sprayed stainless steel coatings in 3.4% NaCl

Stainless steel coatings obtained by High Velocity Oxygen Fuel (HVOF) were characterized using optical (OM) and scanning electron microscopy (SEM), electron probe micro-analysis, X-ray diffraction (XRD), open-circuit potential (E-OC) measurements, electrochemical impedance spectroscopy (EIS) and polarisation tests. Differences among coated steels were mainly related with the gun-substrate distance parameter (310 nm for samples A and B and 260 min for C and D). The open-circuit potential values measured for all the samples after 18 h of immersion in aerated and unstirred 3.4% NaCl solution were: - 0.334, - 0.360, - 0.379 and - 0.412 V vs. Ag/AgCl,KClsat. for samples A to D, respectively. For EIS measurements, Nyquist plots showed higher capacitive semi-circle for samples sprayed at longer distance, indicating higher corrosion resistance in NaCl solution. (c) 2005 Elsevier B.V. All rights reserved.

Electrochemical behavior of thermally sprayed stainless steel coatings in 3.4% NaCl solution

Four types of stainless steel coatings prepared by a high velocity oxy-fuel spraying system (HVOF) were studied. Differences among coated steels were related to the spraying parameters, which influenced the behavior of the samples against the corrosion. The electrochemical behavior of the stainless steel coatings was strongly influenced by porosity, the presence of micro- and macro-cracks, and also of un-melted particles. Once the electrolyte reached the steel substrate via these defects, the galvanic pair formed between the coating and substrate-accelerated corrosion, leading to the depletion of the coating. (C) 2004 Elsevier Ltd. All rights reserved.

Effect of hydrogen charging on the stability of SAE 10B22 steel surface in alkaline solutions

The influence of hydrogen charging into a quenched and tempered boron steel membrane electrode (SAE 10B22) was studied using borate buffer (pH 8.4) and NaOH solutions (pH 12.7), with or without the addition of 0.01 M EDTA. At the hydrogen input side, hydrogen charging influenced cyclic voltammograms increasing the anodic charge of iron(II) hydroxide formation, and decreasing the donor density of passive films. These results suggest that the hydrogen ingress caused instability of metallic surface, increasing the surface area activity. (C) 2005 Elsevier Ltd. All rights reserved.

Austenite decomposition of C-Mn steel containing boron by continuous cooling

The austenite decomposition in C-Mn steel containing boron was studied by continuous cooling from 1100 and 845 degreesC using the Jominy test. The results indicate that the different cooling speeds and the presence of boron refine and change the percentage of ferrite microstructure, martensite, and fine pearlite. (C) 2001 Elsevier B.V. B.V. All rights reserved.

Effect of cerium (IV) ions on the anticorrosion properties of siloxane-poly(methyl methacrylate) based film applied on tin coated steel

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)