A study in Crystal engineering: Solid-state photodimerization of chloro- and methyl-coumarins

Use of chloro and methyl substitution in crystal engineering and their interchangeability in terms of mode of packing have been examined in a series of substituted coumarins. Photoreactivity in the solid state lists been correlated with the crystallograhic structures of these coumarins. The packing of chloro-substituted aromatic compounds has been investigated by analysing the arrangement of 132 compounds. Results substantiate the use of the chloro group as a steering agent and show that the chloro and methyl groups are not always interchangeable.

Correction factors for dynamic state estimation of aggregated generators

This paper presents an approach for dynamic state estimation of aggregated generators by introducing a new correction factor for equivalent inter-area power flows. The spread of generators from the center of inertia of each area is summarized by the correction term α on the equivalent power flow between the areas and is applied to the identification and estimation process. A nonlinear time varying Kalman filter is applied to estimate the equivalent angles and velocities of coherent areas by reducing the effect of local modes on the estimated states. The approach is simulated on two test systems and the results show the effect of the correction factor and the performance of the state estimation by estimating the inter-area dynamics of the system.

A solid state pulsed NMR spectrometer

A 10 MHz pulsed NMR spectrometer, built using mostly solid state devices, is described. The pulse programmer provides 2-pulse, 3-pulse, saturation burst and Carr-Purcell sequences both in repetitive and manual modes of operation. The transmitter has a maximum power output of ∼ 2 kW with a 75 Ω output impedance termination. The total gain of the receiver system is around 120 dB with a minimum band width of 2 MHz. The recovery time of the receiver is ∼ 7 µsec. A two-channel boxcar integrator capable of working in the single channel, differential and double boxcar modes provides signal to noise ratio improvement. The sensitivity and the linearity of the boxcar integrator are ∼ 2 mV and ∼ 0.1% respectively.

On a linear steady-state system of equations in microcontinuum fluid mechanics

Galerkin representations and integral representations are obtained for the linearized system of coupled differential equations governing steady incompressible flow of a micropolar fluid. The special case of 2-dimensional Stokes flows is then examined and further representation formulae as well as asymptotic expressions, are generated for both the microrotation and velocity vectors. With the aid of these formulae, the Stokes Paradox for micropolar fluids is established.

Steady state design of a sequence of sparger reactors

Abstract is not available.

A detailed study of Li-DNA fibres at various salt concentrations reveals a non-helical B-DNA and a possible similarity of solution and solid state structures

A thorough investigation of salt concentration dependence of lithium DNA fibres is made using X-ray diffraction. While for low salt the C-form pattern is obtained, crystalline B-type diffraction patterns result on increasing the salt concentration. The salt content in the gel (from which fibres are drawn) is estimated by equilibrium dialysis using the Donnan equilibrium principle. The salt range giving the best crystalline B pattern is determined. It is found that in this range meridional reflections occur on the fourth and sixth layer lines. In addition, the tenth layer meridian is absent at a particular salt concentration. These results strongly suggest the presence of non-helical features in the DNA molecule. Preliminary analysis of the diffraction patterns indicates a structural variability within the B-form itself. Further, the possibility of the structural parameters of DNA being similar in solid state and in solution is discussed.

Making More from Sheep Phase II : MMfS State Coordination – Queensland

Making More from Sheep (MMfS) is a majority market extension program funded by Meat & Livestock Australia (MLA) and Australian Wool Innovation (AWI). Phase II of MMfS commenced in Queensland with a business planning process in October 2010 and delivery from November 2010 until November 2013. Mr Tony Hamilton of the Department of Agriculture, Fisheries and Forestry (DAFF) was initially the State Coordinator with responsibility for planning, project implementation, monitoring and evaluation. He was replaced by Ms Nicole Sallur from DAFF towards the end of the project. Delivery involving partner organisations provided best practice management information and tools to sheep producers with target Key Performance Indicators (KPI’s) exceeded across all three tiers of engagement category. 31 events were delivered to 551 participants. Satisfaction and value scores averaged across all events measured 8.7 and 8.2 respectively. Operational recommendations have been included in the report.

State Dependent Attempt Rate Modeling of Single Cell IEEE 802.11 WLANs with Homogeneous Nodes and Poisson Arrivals

Analytical models of IEEE 802.11-based WLANs are invariably based on approximations, such as the well-known mean-field approximations proposed by Bianchi for saturated nodes. In this paper, we provide a new approach for modeling the situation when the nodes are not saturated. We study a State Dependent Attempt Rate (SDAR) approximation to model M queues (one queue per node) served by the CSMA/CA protocol as standardized in the IEEE 802.11 DCF. The approximation is that, when n of the M queues are non-empty, the attempt probability of the n non-empty nodes is given by the long-term attempt probability of n saturated nodes as provided by Bianchi's model. This yields a coupled queue system. When packets arrive to the M queues according to independent Poisson processes, we provide an exact model for the coupled queue system with SDAR service. The main contribution of this paper is to provide an analysis of the coupled queue process by studying a lower dimensional process and by introducing a certain conditional independence approximation. We show that the numerical results obtained from our finite buffer analysis are in excellent agreement with the corresponding results obtained from ns-2 simulations. We replace the CSMA/CA protocol as implemented in the ns-2 simulator with the SDAR service model to show that the SDAR approximation provides an accurate model for the CSMA/CA protocol. We also report the simulation speed-ups thus obtained by our model-based simulation.

Solid state and solution conformation of Boc-L-Met-Aib-L-Phe-OMe. Beta-turn conformation of a sequence related to an active chemotactic peptide analog

The conformation of the peptide Boc-L-Met-Aib-L-Phe-OMe has been studied in the solid state and solution by X-ray diffraction and 1H n.m.r., respectively. The peptide differs only in the N-terminal protecting group from the biologically active chemotactic peptide analog formyl-L-Met-Aib-L-Phe-OMe. The molecules adopt a type-II beta-turn in the solid state with Met and Aib as the corner residues (phi Met = -51.8 degrees, psi Met = 139.5 degrees, phi Aib = 58.1 degrees, psi Aib = 37.0 degrees). A single, weak 4----1 intramolecular hydrogen bond is observed between the Boc CO and Phe NH groups (N---O 3.25 A, N-H---O 128.4 degrees). 1H n.m.r. studies, using solvent and temperature dependencies of NH chemical shifts and paramagnetic radical induced line broadening of NH resonances, suggest that the Phe NH is solvent shielded in CDCl3 and (CD3)2SO. Nuclear Overhauser effects observed between Met C alpha H and Aib NH protons provide evidence of the occurrence of Met-Aib type-II beta-turns in these solvents.

The Europeanisation of occupational health services: A study of the impact of EU policies

This study concerns Framework Directive 89/391/EEC on health and safety at work, which encouraged improvements in occupational health services (OHS) for workers in EU member states. Framework Directive 89/391/EEC originally aimed at bringing the same level of occupational health and safety to employees in both the public and private sectors in EU member states. However, the implementation of the framework directive and OHS varies widely among EU member states. Occupational health services have generally been considered an important work-related welfare benefit in EU member states. The purpose of this study was to analyse OHS within the EU context and then analyse the impact of EU policies on OHS implementation as part of the welfare state benefit. The focus is on social, health, and industrial policies within welfare state regimes as well as EU policy-making processes affecting these policies in EU member states. The research tasks were divided into four groups related to the policy, functions, targets,and actors of OHS. The questions related to policy tried to discover the role of OHS in other policies, such as health, social, and labour market policies within the EU. The questions about functions sought to describe the changes, as well as the path dependence, of OHS in EU member states after the framework directive. The questions about targets were based on the general aims of WHO and the ILO in relation to equity, solidarity, universality, and access to OHS. The questions on actors were designed to understand the variety of stakeholders interested in OHS. The actors were supranational (EU, ILO, and WHO), national (ministries, institutes, and professional organisations), and social partners (trade unions and employers organisations). The study data were collected by interviewing 92 people in 15 EU member states, including representatives of ministries, institutions, research,trade unions, employers organisations, and occupational health organisations. Other documents were collected from the Internet,databases, libraries, and conference materials for a systematic review of the policies, strategies, organisation, financing, and monitoring of OHS in EU member states. Different analytical methods were used in the data analysis. The main findings of the study can be summarised as follows. First, occupational health services is a context-dependent phenomenon, which therefore varies according to the development of the welfare state in general, and depends on each country s culture, history, economy, and politics. The views of different stakeholders in EU member states concerning the impact and possibilities of OHS to improve health vary from evidence-based opinions to the sporadic impact of OHS on occupational health. OHS as a concept is vaguely defined by the EU, whereas the ILO defines OHS content. The tasks of OHS began as preventive and protective services for workers. However, they have moved towards multidisciplinary and organisational development as well as the workplace health promotion sphere.Since 1989 OHS has developed differently in different EU member states depending on the starting position of those states, but planning and implementation are crucial phases in the process toward better OHS coverage, equity, and access. Nevertheless, the data used for the planning and legitimisation of OHS activities are mainly based on occupational health data rather than on OHS data. This makes decisions on political or policy grounds inaccurate. OHS is still an evolving concept and benefit for workers, but the Europeanisation of OHS reflects contextual changes, such as the impact of the internal market, competition, and commercialisation on OHS. Stronger cooperation and integration with health, social, and employment services would be an asset for workers, because of new epidemics, an epidemiological shift towards new risks, an ageing labour market, and changes in the labour market. Different methods and approaches are needed in order to study the results of integrated services. In the future, more detailed information will be needed about the actual impact of EU policies on OHS and decision-making processes in order to get OHS into different policies in the EU and its member states. Further results and effects of OHS processes on occupational health need to be analysed more carefully. The adoption of a variety of research strategies and a multidisciplinary approach to understand the influence of different policies on OHS in the EU and its member states would highlight the options and opportunities to improve workers occupational health. Key subject headings: Occupational health services, EU policy, policymaking,framework directive 89/391/EEC

Triplet-state Photophysics and Transient Photochemistry of Cyclic Enethiones A Laser Flash Photolysis Study

The triplets of four cyclic enethiones, including thiocoumarin, have been investigated by nanosecond laser flash photolysis. Data are presented for transient spectra and kinetics associated with triplets, quantum yields of intersystem crossing and singlet oxygen photosensitization. The quenching of the thiocoumarin triplet (A:, = 485 nm, E:,, = 8.8 x lo3 dm3 mol-' cm-'in benzene) by several olefins, amines and hydrogen donors occurs with rate constants of 107-5 x lo9 dm3 mol-' s-'; the lower limits of quantum yields ( c#+~) for the related photoreactions, estimated from ground-state depletion, are generally small (0.0-0.1 1 in benzene, except for good hydrogen donors, namely, p-methoxythiophenol and tri-n-butylstannane) . The radical anion of thiocoumarin (A,,, = 405-435 nm) is formed in two stages upon triplet quenching by triethylamine in acetonitrile; the fast component is the result of direct electron transfer to the triplet and the slower component is assigned to secondary photoreduction of the thione ground state by the a-aminoalkyl radical derived from the triethylamine radical-cation.

AG15 (Sustainable Agricultural State-level Investment Program) natural resource management extension in irrigated cotton and grain

Natural Resource Management project developing reources and supporting best practice management for irrigated cotton and grain growers in Queensland.

Preparative solid state chemistry. Recent developments

A survey of recent developments in preparative solid state chemistry shows that, with a knowledge of structural chemistry and reactivity patterns of solids, it is possible to synthesize a variety of new solids possessing novel structures. A distinction is made between synthesis ofnew solids and synthesis of solids bynew methods. Three new routes to solid state synthesis are recognized: the precursor method, and topochemical methods involving redox and ion-exchange reactions. The low-temperature topochemical methods enable synthesis of metastable phases that are inaccessible by the high temperature route. Several illustrative examples of solid state synthesis from the recent literature are presented.