924 resultados para Solid waste landfill
Resumo:
This work analyses the recuperation of the energy of Municipal Solid Waste (MSW) through the incineration process. It considers the up to date tendency of segregation (separation) of plastic, paper and cardboard, glass and metals and their influence in the fluxes of mass and energy in the incineration system of MSW. For its development was used information related to the generation of MSW in Bauru city and the Combust software. The results so obtained allowed the estimation of the Caloric power of the typical MSW and also of this residue when one considers the separations of paper/cardboard and plastic for recycling.
Resumo:
The incentive for consumption and production in large quantity in modern society generates enormous amounts of urban solid residues in the form of municipal solid waste (MSW). With the intention of reducing these residues of the municipal waste tips and to generate energy, briquettes with mixtures of MSW and residues of Eucalyptus grandis were produced. The briquettes were manufactured with 0, 5, 10, 15, 20 and 25% of MSW in the mixture with wood waste and 12% of moisture content. The analyzed parameters used to choose the best treatments were combustion analysis versus ash content, mechanical strength and energy content. The briquettes up to 10% of MSW showed low resistance, and above 15% showed large increase in ash content. Therefore, the treatment that fulfilled the requirements for combustion versus ash content and mechanical resistance was of at least 15% of MSW, since the source of the ash is unidentified. Considering the net energy content, the best treatment was 25% of MSW, with 17,175 kJ kg-1. Nevertheless, it is strongly advised that further studies related to gas emissions are necessary.
Resumo:
This paper presents a brief review about site investigation procedures for contaminated sites recommended by Brazilian and Canadian environmental agencies as well as discusses the theme of geo-environmental investigation as applied to Brazilian practice. The main definitions on the theme are reviewed and some guidelines are proposed for conducting a geo-environmental investigation of Brazilian contaminated sites using different site and laboratory investigation techniques based on the presented review and on the experience obtained from the investigation of a solid waste disposal site in the interior of the state of São Paulo, Brazil.
Resumo:
Incluye bibliografía
Resumo:
Incluye Bibliografía
Resumo:
The objective of this study was to evaluate the effect of organic fertilizers (urban solid waste and swine manure) as a source of nutrients and residue from bauxite processing as a corrective of soil acidity, in area cultivated with sugar cane irrigated with potable water and served in the availability of phosphorus (P), potassium (K), calcium (Ca), magnesium (Mg) and sulfur (S) levels in the soil and plants. For this experiment was carried out in pots, using a Alfisol, assessing the availability of the elements in the 0-20 cm layer and the concentration of these nutrients in the leaves of sugarcane. The data showed that the residues increased the concentrations of Ca and Mg in soil, as the concentration of K was not changed and S was not detected, due to the low concentration in the soil. In the leave +1 of sugarcane the residue of bauxite increased levels of N, P, K, Ca and Mg (15.68, 1.73, 10.43, 3.50 and 1.08 g kg-1, respectively). The application of urban solid waste and swine manure also increased the levels of N, K and Ca (11.56, 9.18 and 2.81 g kg-1, respectively). The quality of irrigation water did not alter the availability of P, K, Ca, Mg and S in the soil as well as the levels of these macronutrients in the plant.
Resumo:
Taking into account the current context about environmental concern, the main purposes of this research were to develop and apply indicators in order to evaluate waste residues management in airports. As a result, 17 indicators related to generation, storage, transportation, collection, and solid waste disposal were created. These were applied in Viracopos International Airport, in Campinas, São Paulo State, Brazil. The results obtained in the study had a 2.9 performance, in a scale from one to five, characterized as regular. Posteriorly, the main weaknesses in waste residues management were analyzed in such Airport, as well as good practices and solutions were identifed. The highlighted management strategies suggested were the adjustment of areas for waste storage, recycling, and residues composting.
Resumo:
The concern related to solid waste increases efforts to develop products based on biodegradable materials. At present, PLA has one of the highest potentials among biopolyesters, particularly for packaging. However, its application is limited in some fields. In order to optimize PLA properties, organo-modified montmorilonites have been extensively used to obtain nanocomposites. Although PLA nanocomposites studies are widely reported in the literature, there is still few information about the influence of organoclays on de biodegradation process, which is a relevant information, since one of the main purposals related to the final disposal of biopolymers as PLA is composting. Besides, in the last years some research has been conducted in order to evaluate the potential toxicity of montmorilonite, unmodified or organo-modified. Since the use of montmorilonite is expanding in different applications, human exposure and risk assessment are important issues to be investigated. In this context, this review intends to compile available information related to common organoclays used for PLA nanocomposites, its properties, biodegradation analysis and potential toxicity evaluation of nanocomposites, focused on montmorilonite as filler. Two issues of relevance were pointed out. The first is food safety and quality, and the second consideration is the environmental effect. © 2013 Springer Science+Business Media New York.
Resumo:
The purpose of this study was to evaluate the physical and mechanical properties of particleboard made with pruning wastes from Ipê (Tabebuia serratifolia) and Chapéu-de-Sol (Terminalia catappa) trees. Particleboards were prepared with both wood species, using all the material produced by grinding the pruning wastes. The particleboards had dimensions of 45×45 cm, a thickness of approximately 11.5 mm and an average density of 664 kg/m3. A urea-formaldehyde adhesive was used in the proportion of 12% of the dry particle mass. The particleboards were pressed at a temperature of 130 C for 10 mins. The physical and mechanical properties analyzed were density, moisture content, thickness swelling, percentage of lignin and cellulose, modulus of resilience, modulus of elasticity and tensile strength parallel to the grain, accordingly to the standards NBR 14810 and CS 236-66 (1968). The particleboards were considered to be of medium density. The particle size significantly affected the static bending strength and tensile strength parallel to the grain. Ipê presented better results, demonstrating a potential for the production and use of particleboard made from this species. © The Author(s) 2013.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)