Assessing the Functionality and Biocompatibility of a Wireless Contact Lens Sensor for 24 hour-intraocular Pressure Monitoring in Volunteers: Preliminary Results

Purpose: In vitro studies in porcine eyes have demonstrated a good correlation between induced intraocular pressure variations and corneal curvature changes, using a contact lens with an embedded microfabricated strain gauge. Continuous 24 hour-intraocular pressure (IOP) monitoring to detect large diurnal fluctuation is currently an unmet clinical need. The aims of this study is to evaluate precision of signal transmission and biocompatibility of 24 hour contact lens sensor wear (SENSIMED Triggerfish®) in humans. Methods: After full eye examination in 10 healthy volunteers, a 8.7 mm radius contact lens sensor and an orbital bandage containing a loop antenna were applied and connected to a portable recorder. Best corrected visual acuity and position, lubrication status and mobility of the sensor were assessed after 5 and 30 minutes, 4, 7 and 24 hours. Subjective comfort was scored and activities documented in a logbook. After sensor removal full eye examination was repeated, and the registration signal studied. Results: The comfort score was high and did not fluctuate significantly, except at the 7 hour-visit. The mobility of the contact lens was minimal but its lubrication remained good. Best corrected visual acuity was significantly reduced during the sensor wear and immediately after its removal. Three patients developed mild corneal staining. In all but one participant we obtained a registration IOP curve with visible ocular pulse amplitude. Conclusions: This 24 hour-trial confirmed the functionality and biocompatibility of SENSIMED Triggerfish® wireless contact lens sensor for IOP-fluctuation monitoring in volunteers. Further studies with a range of different contact lens sensor radii are indicated.

European integration, FDI and the internal geography of trade : evidence from Western European border regions

In this paper we use a gravity model to study the trade performance of French and Spanishborder regions relatively to non-border regions, over the past two decades. We find that,controlling for their size, proximity and location characteristics, border regions trade onaverage between 62% and 193% more with their neighbouring country than other regions,and twice as much if they are endowed with good cross border transport infrastructures.Despite European integration, however, this trade outperformance has fallen for the mostperipheral regions within the EU. We show that this trend was linked in part to a shift in the propensity of foreign investors to move their affiliates from the regions near their home market to the regions bordering the EU core.

Monetary integration and the cost of borrowing

With the beginning of the European Monetary Union (EMU), euro-area sovereign securities¿ adjusted spreads over Germany (corrected from the foreign exchange risk) experienced an increase that caused a lower than expected decline in borrowing costs. The objective of this paper is to study what explains that rising. In particular, if it took place a change in the price assigned by markets to domestic (credit risk and/or market liquidity) or to international risk factors. The empirical evidence supports the idea that a change in the market value of liquidity occurred with the EMU. International and default risk play a smaller role

Regional integration and specialisation patterns in Spain

The aim of this paper is to analyse how economic integration in Europe has affected industrial geographical concentration in Spain and explain what the driving forces behind industry location are. Firstly, we construct regional specialisation and geographical concentration indices for Spanish 50 provinces and 30 industrial sectors in 1979, 1986 and 1992. Secondly, we carry out an econometric analysis of the determinants of geographical concentration of industries. Our main conclusion is that there is no evidence of increasing specialisation in Spain between 1979 and 1992 and that the most important determinant of Spain¿s economic geography is scale economies. Furthermore, traditional trade theory has no effects in explaining the pattern of industrial concentration

Financial Integration, Trade Openness and International Transmission

[cat] Com afecten l’obertura comercial i financera a la volatilitat macroeconòmica? La literatura existent, tant empírica com teòrica, no ha assolit encara un consens. Aquest article usa un model microfonamentat de dos països simètrics amb entrada endògena d’empreses per estudiar-ho. L’anàlisis es du a terme per tres règims econòmics diferents amb diferents nivells d’integració internacional: una economia tancada, una autarquia financera i una integració plena. Es consideren diversos nivells d’obertura comercial, en forma de biaix domèstic de la demanda i l’economia pot patir pertorbacions en la productivitat del treball i en innovació. El model conclou que la incertesa macroeconòmica, representada principalment per la volatilitat del consum, la producció i la relació real d’intercanvi internacional, depèn del grau d’obertura i del tipus de pertorbació.

MAR-mediated integration of plasmid vectors for in vivo gene transfer and regulation.

BACKGROUND: The in vivo transfer of naked plasmid DNA into organs such as muscles is commonly used to assess the expression of prophylactic or therapeutic genes in animal disease models. RESULTS: In this study, we devised vectors allowing a tight regulation of transgene expression in mice from such non-viral vectors using a doxycycline-controlled network of activator and repressor proteins. Using these vectors, we demonstrate proper physiological response as consequence of the induced expression of two therapeutically relevant proteins, namely erythropoietin and utrophin. Kinetic studies showed that the induction of transgene expression was only transient, unless epigenetic regulatory elements termed Matrix Attachment Regions, or MAR, were inserted upstream of the regulated promoters. Using episomal plasmid rescue and quantitative PCR assays, we observed that similar amounts of plasmids remained in muscles after electrotransfer with or without MAR elements, but that a significant portion had integrated into the muscle fiber chromosomes. Interestingly, the MAR elements were found to promote plasmid genomic integration but to oppose silencing effects in vivo, thereby mediating long-term expression. CONCLUSIONS: This study thus elucidates some of the determinants of transient or sustained expression from the use of non-viral regulated vectors in vivo.

Neuroscience robotics to investigate multisensory integration and bodily awareness.

Humans experience the self as localized within their body. This aspect of bodily self-consciousness can be experimentally manipulated by exposing individuals to conflicting multisensory input, or can be abnormal following focal brain injury. Recent technological developments helped to unravel some of the mechanisms underlying multisensory integration and self-location, but the neural underpinnings are still under investigation, and the manual application of stimuli resulted in large variability difficult to control. This paper presents the development and evaluation of an MR-compatible stroking device capable of presenting moving tactile stimuli to both legs and the back of participants lying on a scanner bed while acquiring functional neuroimaging data. The platform consists of four independent stroking devices with a travel of 16-20 cm and a maximum stroking velocity of 15 cm/s, actuated over non-magnetic ultrasonic motors. Complemented with virtual reality, this setup provides a unique research platform allowing to investigate multisensory integration and its effects on self-location under well-controlled experimental conditions. The MR-compatibility of the system was evaluated in both a 3 and a 7 Tesla scanner and showed negligible interference with brain imaging. In a preliminary study using a prototype device with only one tactile stimulator, fMRI data acquired on 12 healthy participants showed visuo-tactile synchrony-related and body-specific modulations of the brain activity in bilateral temporoparietal cortex.

Integration of local-scale hydrological and regional-scale geophysical based on a nonlinear Bayesian sequential simulation approach

Significant progress has been made with regard to the quantitative integration of geophysical and hydrological data at the local scale. However, extending the corresponding approaches to the regional scale represents a major, and as-of-yet largely unresolved, challenge. To address this problem, we have developed a downscaling procedure based on a non-linear Bayesian sequential simulation approach. The basic objective of this algorithm is to estimate the value of the sparsely sampled hydraulic conductivity at non-sampled locations based on its relation to the electrical conductivity, which is available throughout the model space. The in situ relationship between the hydraulic and electrical conductivities is described through a non-parametric multivariate kernel density function. This method is then applied to the stochastic integration of low-resolution, re- gional-scale electrical resistivity tomography (ERT) data in combination with high-resolution, local-scale downhole measurements of the hydraulic and electrical conductivities. Finally, the overall viability of this downscaling approach is tested and verified by performing and comparing flow and transport simulation through the original and the downscaled hydraulic conductivity fields. Our results indicate that the proposed procedure does indeed allow for obtaining remarkably faithful estimates of the regional-scale hydraulic conductivity structure and correspondingly reliable predictions of the transport characteristics over relatively long distances.

Designing and testing of a sensor based on a magnetoresistive manganese perovskite thick film

In this paper we report on the growth of thick films of magnetoresistive La2/3Sr1/3MnO3 by using spray and screen printing techniques on various substrates (Al2O3 and ZrO2). The growth conditions are explored in order to optimize the microstructure of the films. The films display a room-temperature magnetoresistance of 0.0012%/Oe in the 1 kOe field region. A magnetic sensor is described and tested.

Determinação da tensão de água em solo agrícola usando um sensor de dissipação de calor

Um estudo foi realizado sob condições de laboratório e de campo objetivando avaliar um sensor de solo utilizado para determinação da temperatura e da tensão da água no solo. Devido à solubilidade do gesso, material poroso utilizado na fabricação dos sensores, houve redução em área da seção transversal e volume, e aumento da porosidade efetiva desses sensores, em relação aos valores observados antes do início dos testes. Os valores médios da temperatura observados com os sensores foram praticamente iguais aos observados com um termômetro de referência com precisão de 0,1°C. Quando sensores saturados foram instalados a 5 cm de profundidade em um solo franco-argilo-siltoso secado ao ar, em relação a valores de Delta T, o tempo de resposta do sensor à secagem foi um pouco superior a 24 horas. Valores de Delta T observados, tanto no laboratório quanto no campo, apresentaram maior variabilidade na faixa representativa de solo seco, em comparação com o solo úmido. Sob condições de campo, não houve diferença estatística (teste F; 5%) entre as médias de Delta T obtidas com os sensores de dissipação de calor instalados a 10 cm de profundidade e as médias de tensão obtidas com tensiômetros e transformadas para Delta T.

Estudio sobre los procesos de integración laboral de los inmigrantes. Study of immigrants' labour integration process

El presente trabajo pretende mostrar los resultados de un estudio cuya intención era identificar posibles variables que afectan a los procesos y estrategias de integración laboral de personas procedentes de otros países; las necesidades formativas en relación al colectivo de referencia y ampliar el conocimiento del fenómeno en aras de la intervención psicoeducativa y social. A partir de una metodología de investigación de orientación cualitativa se ha concluido que las diferencias en cuanto a las estrategias de integración y sus logros están más determinadas por los niveles de cualificación en el país de origen que por las propias diferencias culturales. The article shows the results of a study carried out by the authors to identify possible variables that affect the processes and strategies of occupational integration of people coming from other countries, to establish training needs in relation to the reference group and to extend the knowledge of the phenomenon for the sake of the educational and social intervention. Using a qualitative research methodology, it was concluded that the differences in integration strategies and their accomplishments are better explained by the levels of qualification attained in the country of origin than by cultural differences.