Magnetic fields around radio galaxies from Faraday rotation measure analysis

The purpose of this thesis is to investigate the strength and structure of the magnetized medium surrounding radio galaxies via observations of the Faraday effect. This study is based on an analysis of the polarization properties of radio galaxies selected to have a range of morphologies (elongated tails, or lobes with small axial ratios) and to be located in a variety of environments (from rich cluster core to small group). The targets include famous objects like M84 and M87. A key aspect of this work is the combination of accurate radio imaging with high-quality X-ray data for the gas surrounding the sources. Although the focus of this thesis is primarily observational, I developed analytical models and performed two- and three-dimensional numerical simulations of magnetic fields. The steps of the thesis are: (a) to analyze new and archival observations of Faraday rotation measure (RM) across radio galaxies and (b) to interpret these and existing RM images using sophisticated two and three-dimensional Monte Carlo simulations. The approach has been to select a few bright, very extended and highly polarized radio galaxies. This is essential to have high signal-to-noise in polarization over large enough areas to allow computation of spatial statistics such as the structure function (and hence the power spectrum) of rotation measure, which requires a large number of independent measurements. New and archival Very Large Array observations of the target sources have been analyzed in combination with high-quality X-ray data from the Chandra, XMM-Newton and ROSAT satellites. The work has been carried out by making use of: 1) Analytical predictions of the RM structure functions to quantify the RM statistics and to constrain the power spectra of the RM and magnetic field. 2) Two-dimensional Monte Carlo simulations to address the effect of an incomplete sampling of RM distribution and so to determine errors for the power spectra. 3) Methods to combine measurements of RM and depolarization in order to constrain the magnetic-field power spectrum on small scales. 4) Three-dimensional models of the group/cluster environments, including different magnetic field power spectra and gas density distributions. This thesis has shown that the magnetized medium surrounding radio galaxies appears more complicated than was apparent from earlier work. Three distinct types of magnetic-field structure are identified: an isotropic component with large-scale fluctuations, plausibly associated with the intergalactic medium not affected by the presence of a radio source; a well-ordered field draped around the front ends of the radio lobes and a field with small-scale fluctuations in rims of compressed gas surrounding the inner lobes, perhaps associated with a mixing layer.

Dynamical properties and mass-luminosity relation of elliptical galaxies

In questo elaborato abbiamo analizzato un campione di 22 galssie early-type. Utilizzando una tecnica di cross-correlazione, abbiamo ottenuto profili radiali di rotazione e di dis- persione di velocitá. Questi dati ci hanno permesso di investigare molte delle proprietá dinamiche delle nostre galassie. Abbiamo ottenuto indizi sull’anisotropia orbitale e stimato le masse e il rapporto M/L del campione. Le masse misurate variano da 1010 a 1012 M , mentre i valori degli M/L, per cui abbiamo trovato una dipendenza del tipo Log M/L ∝ 0.28 Log L , sono dell’ordine dell’unitá. Abbiamo anche riprodotto le famose relazioni di scala e abbi- amo utlizzato un set di dati sugli indici di Lick/IDS per ricercare relazioni tra le proprietá chimiche e quelle dinamiche. In particolare, abbiamo riscontrato una correlazione tra molti degli indici dipendenti dalla metallicitá e la profonditá della buca di potenziale. Tali indici sembrano correlare anche con il M/L. La rotazione e la forma del profilo di dispersione di velocitá sembrano essere ininfluenti sulle proprietá chimiche. In ultima analisi, abbiamo considerato le implicazioni delle nostre misure riguardo la natura della popolazione stellare e dell’emissione X delle nostre galassie. L’indice di colore e il M/L sembrano indicare che la popolazione stellare delle nostre galassie é dominata da stelle appartenenti alle classi spettrali late-G e early-K. Sembra inoltre esserci una correlazione tra l’emissione X degli elementi del nostro campione e la profonditá della loro buca di potenziale.

Origin of cold gas and dust in massive elliptical galaxies

The recent availability of multi-wavelength data revealed the presence of large reservoirs of warm and cold gas and dust in the innermost regions of the majority of massive elliptical galaxies. To prove an internal origin of cold and warm gas, the investigation of the spatially distributed cooling process which occurs because of non-linear density perturbations and subsequent thermal instabilities is of crucial importance. The first goal of this work of thesis is to investigate the internal origin of warm and cold phases. Numerical simulations are the powerful tool of analysis. The way in which a spatially distributed cooling process originates has been examined and the off-centre amount of gas mass which cools when different and differently characterized AGN feedback mechanisms operate has been quantified. This thesis demonstrates that the aforementioned non-linear density perturbations originate and develop from AGN feedback mechanisms in a natural fashion. An internal origin of the warm phase from the once hot gas is shown to be possible. Computed velocity dispersions of ionized and hot gas are similar. The cold gas as well can originate from the cooling process: indeed, it has been estimated that the surrounding stellar radiation, which is one of the most feasible sources of ionization of the warm gas, does not manage to keep ionized all the gas at 10^4 K. Therefore, cooled gas does undergo a further cooling which can lead the warm phase to lower temperatures. However, the gas which has cooled from the hot phase is expected to be dustless; nonetheless, a large fraction of early type galaxies has detectable dust in their cores, both concentrated in filamentary and disky structures and spread over larger regions. Therefore a regularly rotating disk of cold and dusty gas has been included in the simulations. A new quantitative investigation of the spatially distributed cooling process has therefore been essential: the contribution of the included amount of dust which is embedded in the cold gas does have a role in promoting and enhancing the cooling. The fate of dust which was at first embedded in cold gas has been investigated. The role of AGN feedback mechanisms in dragging (if able) cold and dusty gas from the core of massive ellipticals up to large radii has been studied.

Galaxy evolution in the VIMOS public extragalactic redshift survey (VIPERS)

In this work I present the first measurements of the galaxy stellar mass function (GSMF) from the first public release of the VIPERS catalogue, containing ∼55,000 objects. First, I present the survey design, its scientific goal, the redshift measurements and validation. Then, I provide details about the estimate of galaxy stellar masses, star formation rates, and other physical quantities. I derive the GSMF of different galaxy types (e.g. active and passive galaxies) and as a function of the environment (defined through the local galaxy density contrast). These estimates represent new observational evidence useful to characterise the mechanism of galaxy evolution.

The dynamics of early-type galaxies as a tool to understand their hot coronae and their IMF

Dynamical models of galaxies are a powerful tool to study and understand several astrophysical problems related to galaxy formation and evolution. This thesis is focussed on a particular type of dynamical models, that are widely used in literature, and are based on the solution of the Jeans equations. By means of a numerical Jeans solver code, developed on purpose and able to build state-of-the-art advanced axisymmetric galaxy models, two of the main currently investigated issues in the field of research of early-type galaxies (ETGs) are addressed. The first topic concerns the hot and X-ray emitting gaseous coronae that surround ETGs. The main goal is to explain why flat and rotating galaxies generally exhibit haloes with lower gas temperatures and luminosities with respect to rounder and velocity dispersion supported systems. The second astrophysical problem addressed concerns instead the stellar initial mass function (IMF) of ETGs. Nowadays, this is a very controversial issue due to a growing number of works on ETGs, based on different and independent techniques, that show evidences of a systematic variation of the IMF normalization as a function of galaxy velocity dispersion or mass. These studies are changing the previous opinion that the IMF of ETGs was the same as that of spiral galaxies, and hence universal throughout the whole large family of galaxies.

Forward modelling of petrological crust-forming processes on the early Earth

Tonalite-trondhjemite-granodiorite (TTG) gneisses form up to two-thirds of the preserved Archean continental crust and there is considerable debate regarding the primary magmatic processes of the generation of these rocks. The popular theories indicate that these rocks were formed by partial melting of basaltic oceanic crust which was previously metamorphosed to garnet-amphibolite and/or eclogite facies conditions either at the base of thick oceanic crust or by subduction processes.rnThis study investigates a new aspect regarding the source rock for Archean continental crust which is inferred to have had a bulk compostion richer in magnesium (picrite) than present-day basaltic oceanic crust. This difference is supposed to originate from a higher geothermal gradient in the early Archean which may have induced higher degrees of partial melting in the mantle, which resulted in a thicker and more magnesian oceanic crust. rnThe methods used to investigate the role of a more MgO-rich source rock in the formation of TTG-like melts in the context of this new approach are mineral equilibria calculations with the software THERMOCALC and high-pressure experiments conducted from 10–20 kbar and 900–1100 °C, both combined in a forward modelling approach. Initially, P–T pseudosections for natural rock compositions with increasing MgO contents were calculated in the system NCFMASHTO (Na2O–CaO–FeO–MgO–Al2O3–SiO2–H2O–TiO2) to ascertain the metamorphic products from rocks with increasing MgO contents from a MORB up to a komatiite. A small number of previous experiments on komatiites showed the development of pyroxenite instead of eclogite and garnet-amphibolite during metamorphism and established that melts of these pyroxenites are of basaltic composition, thus again building oceanic crust instead of continental crust.rnThe P–T pseudosections calculated represent a continuous development of their metamorphic products from amphibolites and eclogites towards pyroxenites. On the basis of these calculations and the changes within the range of compositions, three picritic Models of Archean Oceanic Crust (MAOC) were established with different MgO contents (11, 13 and 15 wt%) ranging between basalt and komatiite. The thermodynamic modelling for MAOC 11, 13 and 15 at supersolidus conditions is imprecise since no appropriate melt model for metabasic rocks is currently available and the melt model for metapelitic rocks resulted in unsatisfactory calculations. The partially molten region is therfore covered by high-pressure experiments. The results of the experiments show a transition from predominantly tonalitic melts in MAOC 11 to basaltic melts in MAOC 15 and a solidus moving towards higher temperatures with increasing magnesium in the bulk composition. Tonalitic melts were generated in MAOC 11 and 13 at pressures up to 12.5 kbar in the presence of garnet, clinopyroxene, plagioclase plus/minus quartz (plus/minus orthopyroxene in the presence of quartz and at lower pressures) in the absence of amphibole but it could not be explicitly indicated whether the tonalitic melts coexisting with an eclogitic residue and rutile at 20 kbar do belong to the Archean TTG suite. Basaltic melts were generated predominantly in the presence of granulite facies residues such as amphibole plus/minus garnet, plagioclase, orthopyroxene that lack quartz in all MAOC compositions at pressures up to 15 kbar. rnThe tonalitic melts generated in MAOC 11 and 13 indicate that thicker oceanic crust with more magnesium than that of a modern basalt is also a viable source for the generation of TTG-like melts and therefore continental crust in the Archean. The experimental results are related to different geologic settings as a function of pressure. The favoured setting for the generation of early TTG-like melts at 15 kbar is the base of an oceanic crust thicker than existing today or by melting of slabs in shallow subduction zones, both without interaction of tonalic melts with the mantle. Tonalitic melts at 20 kbar may have been generated below the plagioclase stability by slab melting in deeper subduction zones that have developed with time during the progressive cooling of the Earth, but it is unlikely that those melts reached lower pressure levels without further mantle interaction.rn

Asymmetric drift and halo flattening in disk galaxies

The main result in this work is the solution of the Jeans equations for an axisymmetric galaxy model containing a baryonic component (distributed according to a Miyamoto-Nagai profile) and a dark matter halo (described by the Binney logarithmic potential). The velocity dispersion, azimuthal velocity and some other interesting quantities such as the asymmetric drift are studied, along with the influence of the model parameters on these (observable) quantities. We also give an estimate for the velocity of the radial flow, caused by the asymmetric drift. Other than the mathematical beauty that lies in solving a model analytically, the interest of this kind of results can be mainly found in numerical simulations that study the evolution of gas flows. For example, it is important to know how certain parameters such as the shape (oblate, prolate, spherical) of a dark matter halo, or the flattening of the baryonic matter, or the mass ratio between dark and baryonic matter, have an influence on observable quantities such as the velocity dispersion. In the introductory chapter, we discuss the Jeans equations, which provide information about the velocity dispersion of a system. Next we will consider some dynamical quantities that will be useful in the rest of the work, e.g. the asymmetric drift. In Chapter 2 we discuss in some more detail the family of galaxy models we studied. In Chapter 3 we give the solution of the Jeans equations. Chapter 4 describes and illustrates the behaviour of the velocity dispersion, as a function of the several parameters, along with asymptotic expansions. In Chapter 5 we will investigate the behaviour of certain dynamical quantities for this model. We conclude with a discussion in Chapter 6.

Main characteristics of the emission from elliptical galaxies

Elliptical galaxies are one of the most characteristic objects we can find in the sky. In order to unveil their properties, such as their structure or chemical composition, one must study their spectral emission. In fact they seem to behave rather differently when observed with different eyes. This is because their light is mainly brought by two different components: optical radiation arises from its stars, while the X emission is primarly due to a halo of extremely hot gas in which ellipticals seem to be embedded. After a brief classification, the two main processes linked to these phenomena will be described, together with the informations we can collect thanks to them. Eventually, we will take a quick look at the other regions of the electromagnetic spectrum.

Observability of high density tracing molecular lines in lensed galaxies with the Atacama large millimeter array

Lo scopo di questo lavoro di tesi è indagare le capacità di ALMA di osservare il continuo e le righe molecolari di emissione di HCN, HCO+ e HNC, in galassie lensate ad alto z, nelle prime fasi della loro formazione. Per farlo vengono utilizzate osservazioni ALMA di righe di emissione molecolare, relative a dati pubblici di Ciclo 0. Queste osservazioni vengono utilizzate per simulare in modo realistico l’emissione da parte di galassie ad alto z e la risposta osservativa del telescopio, assumendo diverse possibili geometrie di lensing. Inoltre le recenti osservazioni ALMA sono state utilizzate per aggiornare le relazioni già esistenti tra la luminosità FIR e la luminosità delle righe molecolari. Queste recenti osservazioni con maggiore sensibilità e risoluzione angolare, sembrano essere in buon accordo con le precedenti osservazioni. Per realizzare questo progetto di tesi, sono stati scaricati dall’archivio ALMA i dati non calibrati relativi a due sorgenti ben studiate: NGC1614, rappresentativa delle galassie di tipo starburst ed IRAS 20551-4250, un AGN oscurato. Il processo di calibrazione è stato ripetuto per esaminare le proprietà dei cubi di dati utilizzando il pacchetto Common Astronomy Software Applications (CASA). Le righe spettrali osservate e l’emissione del continuo sono state successivamente estrapolate ad alto z riscalando adeguatamente le distanze, le dimensioni delle sorgenti e le frequenze di emissione. In seguito è stato applicato un modello di lensing gravitazionale basato su quello di Lapi et al. (2012). Sono state considerate diverse configurazioni tra lente e sorgente per ottenere diverse geometrie delle immagini e diversi fattori di amplificazione. Infine stato utilizzato il software CASA per simulare le osservazioni ALMA in modo da verificare le capacità osservative del telescopio al variare della geometria del sistema. Per ogni riga molecolare e per l’emissione del continuo sono state determinate la sensibilit e la risoluzione che possono essere raggiunte con le osservazioni ALMA e sono state analizzate alcune strategie osservative per effettuare survey di righe spettrali in oggetti lensati. Inoltre stata analizzata la possibilit di caratterizzare oggetti starburst ed AGN dai rapporti tra le righe di emissione delle molecole traccianti di alta densit. Le prestazioni di ALMA consentiranno di distinguere e stimare i contributi relativi di SB ed AGN in galassie lensate a z > 2.5, quindi vicine alla loro presunta epoca di formazione (Lapi et al. 2010), in meno di 5 minuti di osservazione per qualsiasi fattore di magnificazione. Nel presente lavoro sono state inoltre discusse alcune strategie osservative per condurre survey o followup per osservare le righe di HCN(4-3), HCO+(4-3) e HNC(4-3) in galassie lensate a redshift 2.5 < z < 3, dimostrando che sono possibili per campioni statisticamente significativi in tempi relativamente brevi.

The thickness of the gaseous layer in disk galaxies

il profilo verticale del gas dipende sia dal potenziale galattico, e quindi dalla distribuzione di materia, sia dalla dispersione di velocit`a del gas La nostra analisi teorica ha mostrato che l’altezza scala dell’idrogeno gassoso ad un certo raggio `e fortemente legata alla componente di massa dominate: nelle parti centrali, dove domina la materia barionica, il disco gassoso incrementa il suo spessore esponenzialmente con una lunghezza scala pari al doppio di quella del disco stellare; dalle zone intermedie fino alla fine del disco, il profilo verticale del gas `e influenzato dalla distribuzione di DM. In queste zone lo spessore del disco gassoso cresce con il raggio in maniera circa lineare. Tale fenomeno viene definito gas flaring. Lo scopo principale di questa tesi `e la ricerca di una nuova tecnica per poter stimare il profilo vertical del gas in galassie con inclinazione intermedia.

On the Luminous and Dark Matter Distribution in Early-Type Galaxies

The way mass is distributed in galaxies plays a major role in shaping their evolution across cosmic time. The galaxy's total mass is usually determined by tracing the motion of stars in its potential, which can be probed observationally by measuring stellar spectra at different distances from the galactic centre, whose kinematics is used to constrain dynamical models. A class of such models, commonly used to accurately determine the distribution of luminous and dark matter in galaxies, is that of equilibrium models. In this Thesis, a novel approach to the design of equilibrium dynamical models, in which the distribution function is an analytic function of the action integrals, is presented. Axisymmetric and rotating models are used to explain observations of a sample of nearby early-type galaxies in the Calar Alto Legacy Integral Field Area survey. Photometric and spectroscopic data for round and flattened galaxies are well fitted by the models, which are then used to get the galaxies' total mass distribution and orbital anisotropy. The time evolution of massive early-type galaxies is also investigated with numerical models. Their structural properties (mass, size, velocity dispersion) are observed to evolve, on average, with redshift. In particular, they appear to be significantly more compact at higher redshift, at fixed stellar mass, so it is interesting to investigate what drives such evolution. This Thesis focuses on the role played by dark-matter haloes: their mass-size and mass-velocity dispersion correlations evolve similarly to the analogous correlations of ellipticals; at fixed halo mass, the haloes are more compact at higher redshift, similarly to massive galaxies; a simple model, in which all the galaxy's size and velocity-dispersion evolution is due to the cosmological evolution of the underlying halo population, reproduces the observed size and velocity-dispersion of massive compact early-type galaxies up to redshift of about 2.

Kinematics of local and high-z galaxies through 3D modeling of emission-line datacubes

The kinematics is a fundamental tool to infer the dynamical structure of galaxies and to understand their formation and evolution. Spectroscopic observations of gas emission lines are often used to derive rotation curves and velocity dispersions. It is however difficult to disentangle these two quantities in low spatial-resolution data because of beam smearing. In this thesis, we present 3D-Barolo, a new software to derive the gas kinematics of disk galaxies from emission-line data-cubes. The code builds tilted-ring models in the 3D observational space and compares them with the actual data-cubes. 3D-Barolo works with data at a wide range of spatial resolutions without being affected by instrumental biases. We use 3D-Barolo to derive rotation curves and velocity dispersions of several galaxies in both the local and the high-redshift Universe. We run our code on HI observations of nearby galaxies and we compare our results with 2D traditional approaches. We show that a 3D approach to the derivation of the gas kinematics has to be preferred to a 2D approach whenever a galaxy is resolved with less than about 20 elements across the disk. We moreover analyze a sample of galaxies at z~1, observed in the H-alpha line with the KMOS/VLT spectrograph. Our 3D modeling reveals that the kinematics of these high-z systems is comparable to that of local disk galaxies, with steeply-rising rotation curves followed by a flat part and H-alpha velocity dispersions of 15-40 km/s over the whole disks. This evidence suggests that disk galaxies were already fully settled about 7-8 billion years ago. In summary, 3D-Barolo is a powerful and robust tool to separate physical and instrumental effects and to derive a reliable kinematics. The analysis of large samples of galaxies at different redshifts with 3D-Barolo will provide new insights on how galaxies assemble and evolve throughout cosmic time.

Extraktion und nanoanalytische Charakterisierung refraktärer Nanometallpartikel frühester solarer Materie und Synthese metallischer Nanopartikel aus dotierten Ca-Mg-Al-Si-Schmelzen

Primitive kohlige Chondrite sind Meteorite, die seit ihrer Entstehung im frühen Sonnensystem kaum verändert wurden und dadurch einen Einblick in Prozesse geben, die zur Bildung und Veränderung der ersten festen Materie führten. Solche Prozesse können anhand von Bruchstücken dieser Meteorite detailliert im Labor studiert werden, sodass Rückschlüsse auf die Entwicklung unseres Sonnensystems im frühen Stadium getroffen werden können. Ca-, Al-reiche Einschlüsse (CAIs) aus chondritischen Meteoriten sind die ersten Festkörper des Sonnensystems und enthalten viele refraktäre Metallnuggets (RMNs), welche hauptsächlich aus den Elementen Os, Ir, Ru, Mo und Pt bestehen. Nach weit verbreiteter Ansicht sind diese Nuggets wahrscheinlich im Gleichgewicht mit dem solaren Nebel kondensiert, bereits früher oder gleichzeitig mit Oxiden und Silikaten. Die exakten Mechanismen, die zu ihren heute beobachteten Eigenschaften führten, sind allerdings unklar. Um frühere Arbeiten fortzuführen, wurde eine hohe Anzahl RMNs in vier unterschiedlichen Typen von Meteoriten detailliert studiert, darunter solche aus dem nahezu unveränderten Acfer 094, Allende (CV3ox), Leoville (CV3red) und Murchison (CM2). Die RMNs wurden in-situ, assoziiert mit ihren Wirtsmineralen und auch in Säurerückständen gefunden, deren Präparationsprozedur in dieser Arbeit speziell für RMNs durch eine zusätzliche Dichtetrennung verbessert wurde.rnDie Ergebnisse decken eine Reihe von Ungereimtheiten zwischen den beobachteten RMN-Eigenschaften und einer Kondensationsherkunft auf, sowohl für Kondensation in solarer Umgebung, als auch für Kondensation aus Material von Supernovae oder roten Riesen, für die die Kondensationssequenzen refraktärer Metalle speziell für diesen Vergleich berechnet wurden. Stattdessen wurden in dieser Arbeit neue Einblicke in die RMN-Entstehung und die Entwicklung der ersten Festkörper (CAIs) durch eine Kombination aus experimentellen, isotopischen, strukturellen und petrologischen Studien an RMNs gewonnen. Viele der beobachteten Eigenschaften sind mit Ausfällung der RMN aus einer CAI-Schmelze vereinbar. Ein solches Szenario wird durch entsprechende Untersuchungen an synthetisch hergestellten, mit refraktären Metallen im Gleichgewicht stehenden CAI-Schmelzen bestätigt. Es folgt aus den Ergebnissen, dass die Mehrzahl der RMNs isotopisch solar ist und alle untersuchten RMNs innerhalb von CAIs bei rascher Abkühlung (um bis zu 1000 °C/40 sek.) einer CAI-Schmelze gebildet wurden. rn