Amostragem foliar da bananeira 'Prata-Anã

Para diagnose nutricional da bananeira, é necessário padronizar a amostragem do tecido a ser utilizado, já que a composição mineral varia com a idade da planta, com a folha amostrada, entre as diversas partes da folha, ao que se somam as condições ecológicas, diferenças varietais e flutuações sazonais dos elementos. Portanto, a possibilidade de equívoco na interpretação é considerável. O Método de Amostragem Internacional de Referência (MEIR) para bananeira recomenda coletar a terceira folha de plantas com cachos que apresentem todas as pencas visíveis e não mais que três mãos de flores masculinas abertas, retirando-se a metade interna de uma faixa central do limbo, desprovida da nervura central. Há uma dificuldade em seguir tal recomendação para bananeira 'Prata-Anã' cultivada no norte de Minas Gerais, pois ela possui porte alto e roseta foliar muito densa, que confunde a localização da folha amostrada. Além disso, normalmente, as amostras são retiradas com largura diferente dos 10 cm recomendados. Dadas as dificuldades de amostragem da bananeira 'Prata-Anã' e o fato de besta cultivar sob irrigação ser pouco estudada, comparada àquelas do subgrupo Cavendish, o presente trabalho objetivou determinar o efeito da folha amostrada e da largura da amostra sobre os teores minerais de bananeira 'Prata-Anã' cultivada sob irrigação no norte de Minas Gerais. Apesar das variações estatísticas, os teores foliares mantiveram-se dentro da faixa de suficiência, independentemente da posição da folha amostra da- 2ª, 3ª ou 4ª folha - ou do tamanho da amostra - 10; 20 ou 30 cm de largura. Isto sugere que a coleta de folha na posição acima (segunda) ou abaixo (quarta) da folha recomendada terceira, numa largura foliar de 10 a 30 cm, pouco altera os teores foliares em relação à indicação pelo método MEIR, tolerando-se assim uma possível variação da amostra quanto à posição e à largura foliar testadas.

Identificação das condições gerais de conservação dos reservatórios integrantes do sistema de abastecimento de água de Natal

Infrastructure works are included in strategic areas for the social development. For that matter that all of the investments are very important for the social development. When the population has enough water and an acceptable quality, and it includes a wastewater gathering and its treatment, the whole society became less susceptible to the water diseases. Even the Water Supply and the Sewage depend for its perfect operation of reservoirs, or of the accumulation of water to provide the popular necessity, either due to retention or for the treatment wastewarer. These structures present very specific environmental conditions, because the microclimate created around them, like high environmental humidity and for the existence of many harmful substances for the concrete, such as chloride ions presents in water. The reservoir that compose the System of Water Supply of Natal were built between 1970s and 1980s, a period whom the technical and scientific community did not have in-depth studies about the reinforced concrete mechanism of deterioration. Therefore, these reservoirs have been suffered accelerated deterioration progress, and they have been shown many pathological manifestations strikingly visible. In front of all these problems this academic work aims to identify the generally conditions of conservation of all the reservoirs components of the Water Supply System of Natal. This academic work objectives to develop a recuperation plan for use in these reservoirs, in this academic work it was achieved all the survey of pathological manifestation existing in each reservoir. It was made with local visits, photographic recorders of all manifestations viii and realization of in loco tests. The other step consisted in a application of GDE/UnB metodolgy reformulated by Fonseca (2007). In the step of local visits in each reservoir it was evaluated carbonation depth, by spreading a phenolphthalein solution with 1% of concentration; evaluation of contamination of chlorides, by spreading silver nitrate solution with 1% of concentration, and evaluation of width cracks. After the conclusion of all the testings, it was established that all reservoir, studied in this academic work, have showed an advanced deteriorating condition. It´s presents prevalent pathological manifestations as unacceptable cracks, spots, efflorescence and reinforcement corrosion, and in some cases, chlorides contamination. After the conclusion of the testings and its concatenation it was able to implementing, using GDE/UnB methodology, the order of the restoration its service life and initial safety conditions

Exigências de triptofano e padrão de recuperação do desempenho de poedeiras comerciais após alimentação com rações deficientes em triptofano

Este experimento foi conduzido para avaliar as exigências de triptofano e o padrão de recuperação do desempenho de poedeiras alimentadas com rações deficientes em triptofano. Foram utilizadas 160 poedeiras comerciais da linhagem Hisex White distribuídas em um delineamento inteiramente casualizado com cinco níveis de triptofano nas dietas (0,13; 0,15; 0,17; 0,19 e 0,21%), com oito repetições de quatro aves. As poedeiras permaneceram por duas semanas em adaptação (51 a 52 semanas), por seis semanas para avaliação da exigência de triptofano (53 a 58 semanas) e por quatro semanas para determinação do padrão de recuperação do desempenho (59 a 62 semanas). A produção e a massa de ovos foram prejudicadas quando as poedeiras foram alimentadas com rações contendo 0,13% de triptofano, no entanto, o desempenho foi recuperado após uma semana de alimentação com ração contendo 0,21% desse aminoácido. A qualidade interna dos ovos não foi influenciada pelos níveis de triptofano estudados (ingestão de 137,1 a 228,0 mg triptofano/dia). As exigências de triptofano foram estabelecidas entre 161 e 188 mg/dia, dependendo da característica avaliada (produção ou massa de ovos) e do modelo de regressão aplicado (polinomial, exponencial ou segmentado).

Seleção seqüencial de descritores por análise da semântica para recuperação de imagens baseada no conteúdo

With the rapid growth of databases of various types (text, multimedia, etc..), There exist a need to propose methods for ordering, access and retrieve data in a simple and fast way. The images databases, in addition to these needs, require a representation of the images so that the semantic content characteristics are considered. Accordingly, several proposals such as the textual annotations based retrieval has been made. In the annotations approach, the recovery is based on the comparison between the textual description that a user can make of images and descriptions of the images stored in database. Among its drawbacks, it is noted that the textual description is very dependent on the observer, in addition to the computational effort required to describe all the images in database. Another approach is the content based image retrieval - CBIR, where each image is represented by low-level features such as: color, shape, texture, etc. In this sense, the results in the area of CBIR has been very promising. However, the representation of the images semantic by low-level features is an open problem. New algorithms for the extraction of features as well as new methods of indexing have been proposed in the literature. However, these algorithms become increasingly complex. So, doing an analysis, it is natural to ask whether there is a relationship between semantics and low-level features extracted in an image? and if there is a relationship, which descriptors better represent the semantic? which leads us to a new question: how to use descriptors to represent the content of the images?. The work presented in this thesis, proposes a method to analyze the relationship between low-level descriptors and semantics in an attempt to answer the questions before. Still, it was observed that there are three possibilities of indexing images: Using composed characteristic vectors, using parallel and independent index structures (for each descriptor or set of them) and using characteristic vectors sorted in sequential order. Thus, the first two forms have been widely studied and applied in literature, but there were no records of the third way has even been explored. So this thesis also proposes to index using a sequential structure of descriptors and also the order of these descriptors should be based on the relationship that exists between each descriptor and semantics of the users. Finally, the proposed index in this thesis revealed better than the traditional approachs and yet, was showed experimentally that the order in this sequence is important and there is a direct relationship between this order and the relationship of low-level descriptors with the semantics of the users

Avaliação nutricional em folhas de bananeira 'Prata-anã' adubadas com composto orgânico

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Amadurecimento da banana-prata climatizada em diferentes dias após a colheita

O amadurecimento induzido por climatização em bananas, é um procedimento que tem sido largamente utilizado. Ele proporciona uma maturação uniforme, já que a fruta apresenta maturação desuniforme em vista da formação dos frutos em pencas com diferentes idades. No entanto, não há para todas as cultivares de banana, estudos específicos em relação ao tempo entre a colheita e a climatização que possa afetar a qualidade dos frutos. Desta forma, com o presente trabalho objetivou-se avaliar mediante as características físicas, químicas e fisiológicas a qualidade da banana - prata climatizada em diferentes dias entre a colheita e a climatização. Foram testados três diferentes dias de climatização sendo 1, 2 e 3 dias após a colheita. Ao final da climatização, os frutos foram armazenados em temperatura ambiente por um período de 5 dias. As análises realizadas foram: perda de massa, coloração da casca, respiração, firmeza, pH, sólidos solúveis, acidez titulável e amido. Frutas climatizadas 1 dia após a colheita apresentaram-se, no 1º dia de armazenamento, com menor perda de massa, mais verdes, com maior liberação de CO2, mais firmes, com menores teores de sólidos solúveis e maior porcentagem de amido, quando comparados àqueles climatizados aos 2 e 3 dias após a colheita. Essa diferença foi reduzida com o decorrer do armazenamento praticamente se igualando os tratamentos ao final do armazenamento.

Desenvolvimento e caracterização de nanocompósito de resina epóxi com nanopartículas de sílica para revestimento de dutos para transporte de petróleo

The use of polymer based coatings is a promising approach to reduce the corrosion problem in carbon steel pipes used for the transport of oil and gas in the oil industry. However, conventional polymer coatings offer limited properties, which often cannot meet design requirements for this type of application, particularly in regard to use temperature and wear resistance. Polymer nanocomposites are known to exhibit superior properties and, therefore, offer great potential for this type of application. Nevertheless, the degree of enhancement of a particular property is greatly dependent upon the matrix/nanoparticle material system used, the matrix/nanoparticle interfacial bonding and also the state of dispersion of the nanoparticle in the polymer matrix. The objective of the present research is to develop and characterize polymer based nanocomposites to be used as coatings in metallic pipelines for the transportation of oil and natural gas. Epoxy/SiO2 nanocomposites with nanoparticle contents of 2, 4, and 8 wt % were processed using a high-energy mill. Modifications of the SiO2 nanoparticles‟ surfaces with two different silane agents were carried out and their effect on the material properties were investigated. The state of dispersion of the materials processed was studied using Scanning and Transmission Electron Microscopy (SEM and TEM) micrographs. Thermogravimetric analysis (TG) were also conducted to determine the thermal stability of the nanocomposites. In addition, the processed nanocomposites were characterized by dynamic mechanical analysis (DMA) to investigate the effect of nanoparticles content and silane treatment on the viscoelastic properties and on the glass transition temperature. Finally, wear tests of the pin-on-disc type were carried out to determine the effects of the nanoparticles and the silane treatments studied. According to the results, the addition of SiO2 nanoparticles treated with silane increased the thermal stability, the storage modulus and Tg of the epoxy resin and decreased wear rate. This confirms that the interaction between the nanoparticles and the polymer chains plays a critical role on the properties of the nanocomposites

Análise de confiabilidade de uma bomba centrífuga: aplicação na injeção de água para recuperação de petróleo

The oil industry`s need to produce with maximum efficiency, not to mention the safety and the environment aspects, encourages the optimization of processes. It makes them look for a level of excellence in acquisition of equipment, ensuring the quality without prejudice security of facilities and peoples. Knowing the reliability of equipment and that this stands for a system is fundamental to the production strategy to seeks the maximum return on investment. The reliability analysis techniques have been increasingly applied in the industry as strategy for predicting failures likelihood ensuring the integrity of processes. Some reliability theories underlie the decisions to use stochastic calculations to estimate equipment failure. This dissertation proposes two techniques associating qualitative (through expertise opinion) and quantitative data (European North Sea oil companies fault database, Ored) applied on centrifugal pump to water injection system for secondary oil recovery on two scenarios. The data were processed in reliability commercial software. As a result of hybridization, it was possible to determine the pump life cycle and what impact on production if it fails. The technique guides the best maintenance policy - important tool for strategic decisions on asset management.

Produção e caracterização de frutos de bananeira 'Prata-Anã'e 'Prata-Zulu'

O trabalho objetivou comparar o ciclo cultural e a produção, além de avaliar atributos físico-químicos e sensoriais de frutos de bananeiras das cultivares Prata-Anã e Prata-Zulu, nas condições de Botucatu-SP. Foram avaliadas as seguintes características em campo: número de dias entre o plantio e o florescimento; número de dias entre o florescimento e a colheita; ciclo; peso do cacho; número de frutos por cacho; número de pencas por cacho; peso, número de frutos, comprimento e diâmetro dos frutos da 2ª penca. As análises físico-químicas foram realizadas no dia da colheita e a cada 3 dias, num período de 12 dias, sendo determinados: perda de massa, firmeza, relação polpa/casca, pH, acidez total titulável, e sólidos solúveis totais. Na análise sensorial, avaliou-se a aceitação dos atributos sabor, textura, aparência, aroma e apreciação geral dos frutos. Com os resultados obtidos, verificou-se que a cultivar Prata-Zulu apresentou produção bastante superior à 'Prata-Anã', o que indica ser uma cultivar com boas características agronômicas. Apesar de a cultivar Prata-Zulu apresentar maior perda de massa e menor firmeza, apresentou como vantagem frutos mais doces (maior SST); mesmo assim, a preferência do consumidor é pela 'Prata-Anã', que apresenta como principal vantagem as dimensões do fruto, que são menores, tornando-se assim mais práticos para o consumo.

Agronomic characteristics of 'Prata-anã' and 'Maçã' bananas micropropagated

O experimento foi instalado com o objetivo de estudar o desempenho agronômico de cultivares de bananeira Prata-anã e Maçã, na região de São Manuel-SP. Foram avaliadas as seguintes características de desenvolvimento, no primeiro ciclo de produção: número de dias do plantio à floração e da mesma à colheita, número de rebentos (filhos) emitidos até o surgimento da inflorescência e na época da colheita, número de folhas ativas na época do aparecimento da inflorescência e da colheita, e características de rendimento, como peso médio do cacho, ráquis, penca e fruto, número médio de frutos por penca e cacho, comprimento e diâmetro médio dos frutos. Também foi avaliada a incidência de pragas e doenças. Foi empregado o delineamento inteiramente casualizado, com 2 tratamentos, 15 repetições e 5 plantas úteis por parcela experimental. As duas cultivares foram caracterizadas pelos valores das estatísticas descritivas, média e desvio-padrão, para as características de interesse no experimento. Foram estabelecidas possíveis correlações entre medidas de desenvolvimento e produção. As duas cultivares apresentaram ciclo do plantio até a colheita de 574 dias para 'Prata-anã' e 567 dias para 'Maçã', sendo que o ciclo produtivo foi maior na 'Prata-anã'. Não houve problemas de pragas e doenças em todo o ciclo de produção, nas duas cultivares avaliadas.

Crescimento e produção de bananeira prata-anã adubada com composto orgânico durante cinco safras

O presente trabalho objetivou avaliar a influência da adubação orgânica durante cinco safras, nas características de crescimento e produtividade de plantas de bananeira-'Prata-anã'. O experimento foi instalado no município de Botucatu-SP, em novembro de 2002, com mudas convencionais, adotando-se o espaçamento de 2,5 x 2,5 m, sendo as plantas adubadas com composto orgânico produzido a partir de serragem de madeira e esterco bovino devidamente compostados, que constituíram os tratamentos: 0; 43; 86; 129 e 172 kg de composto por planta, sendo estas doses de composto calculadas de acordo com o teor de potássio presente no composto. No florescimento das plantas em cada ciclo (2003, 2004, 2005, 2006 e 2007), foram medidas a circunferência do pseudocaule, a altura de inserção da inflorescência e determinou-se o número de folhas úteis por planta. Na colheita, foram determinados a massa do cacho, o número de frutos por cacho, o número de pencas por cacho, a massa da 2ª penca, o número de frutos na 2ª penca, o comprimento e o diâmetro de frutos da 2ª penca. As doses de composto orgânico não causaram alterações nas características de crescimento das plantas; contudo, em função dos ciclos avaliados, foi possível observar queda no número de folhas a partir do segundo ciclo e alterações na altura de plantas e circunferência do pseudocaule. No presente trabalho, onde as doses de K2O oscilaram entre zero e 394 g por planta, os cachos com massa mais elevada foram obtidos com as duas maiores quantidades de compostos aplicadas, o que, economicamente, indica como a melhor dose a ser recomendada a de 129 kg de composto por planta, que fornece 290,5 g de K2O por planta.

Estudo tribológico de biolubrificantes com adição de nanopartículas de óxidos (zinco e cobre)

Currently, vegetable oils have been studied for bio-lubricants base that fits the new environmental standards. Since, in a world full of finite natural resources, mineral oils bring consequences to the environment due to its low biodegradability and toxicity, also it is important to consider that synthetic oils have a high cost The aim of this work is to obtain a biolubricant additived with oxide nanoparticles (ZnO and CuO) for better resistance to friction and wear, which is not toxic to the environment and have better adherence under boundary lubrication. The methodology consisted in the synthesis of bio-lubricants (soybean and sunflower base) by epoxidation reaction. Then, some physical-chemical analysis in bio-lubricants are made to characterize theses lubricants, such as, density, acidity, iodine value, viscosity, viscosity index. Later, the lubricants were additive with nanoparticles. The tribological performance was evaluated by the equipment HFRR (High Frequency Reciprocating Rig) consisting of a wear test ball-plan type. The characterization of wear analysis was performed by SEM / EDS. The results show that bio-lubricants may be synthesized by reaction of epoxidation with good conversion. Tribological point of view, the epoxidized oils are more effective than lubricant additived with the oxide nanoparticles, they had lower coefficients of friction and better rate of film formation in the study. However, because they are environmentally friendly, bio-lubricants gain the relevant importance in tribological field

Desenvolvimento de sistemas a base de tensoativos para recuperação avançada de petróleo

Petroleum is a complex combination of various classes of hydrocarbons, with paraffinic, naphtenic and aromatic compounds being those more commonly found in its composition. The recent changes in the world scenario, the large reserves of heavy oils and also the lack of new discoveries of large petroleum fields are indications that, in the near future, the oil recovery by conventional methods will be limited. In order to increase the efficiency of the extraction process, enhanced recovery methods are cited in applications where conventional techniques have proven to be little effective. The injection of surfactant solutions as an enhanced recovery method is advantageous in that surfactants are able to reduce the interfacial tensions between water and oil, thus augmenting the displacement efficiency and, as a consequence, increasing the recovery factor. This work aims to investigate the effects of some parameters that influence the surfactant behavior in solution, namely the type of surfactant, the critical micelle concentration (CMC) and the surface and interface tensions between fluids. Seawater solutions containing the surfactants PAN, PHN and PJN have been prepared for presenting lower interfacial tensions with petroleum and higher stability under increasing temperature and salinity. They were examined in an experimental apparatus designed to assess the recovery factor. Botucatu (Brazil) sandstone plug samples were submitted to assay steps comprising saturation with seawater and petroleum, conventional recovery with seawater and enhanced recovery with surfactant solutions. The plugs had porosity between 29.6 and 32.0%, with average effective permeability to water of 83 mD. The PJN surfactant, at a concentration 1000% above CMC in water, had a higher recovery factor, causing the original oil in place to be recovered by an extra 20.97%, after conventional recovery with seawater

Otimização do processo de recuperação do cromo de efluentes de curtumes por microemulsões no extrator Morris

The tanning industries are those which transform animal hide or skin into leather. Due to the complexity of the transformation process, greater quantities of chemicals are being used which results in the generation of effluents with residual solids. The chromium in the residual waters generated by tanning tend to be a serious problem to the environment, therefore the recovery of this metal could result in the reduction of manufacturing costs. This metal is usually found in a trivalent form which can be converted into a hexavalent compound under acidic conditions and in the presence of organic matter. The present study was carried out with the objective to recover chromium through an extraction/re-extraction process using micro emulsions. Micro emulsions are transparent and thermodynamically stable system composed of two immiscible liquids, one forming the continuous phase and the other dispersed into micro bubbles, established by an interfacial membrane formed by surface active and co-surface active molecules. The process of recovering the chromium was carried out in two stages. The first, an extraction process, where the chromium was extracted in the micro emulsion phase and the aqueous phase in excess was separated. In the second stage, a concentrated acid was added to the micro emulsion phase rich in chromium in order to obtain a Winsor II system, where the water that formed in the micro emulsion phase separates into a new micro emulsion phase with a higher concentration of chromium, due to the lowering of the hydrophiles as well as the ionisation of the system. During the experimental procedure, a study was initiated with a synthetic solution of chromium sulphate passing onto the effluent. A Morris extractor was used in the extraction process. Tests were carried out according to the plan and the results were analysed by statistical methods in order to optimise the main parameters that influence the process: the total rate of flow (Q), stirring speed (w) and solvent rate (r). The results, after optimization, demonstrated that the best percentuals in relation to the chromium extraction (99 %) were obtained in the following operational conditions: Q= 2,0 l/h, w= 425 rpm and r= 0,375. The re-extraction was carried out at room temperature (28 °C), 40 °C and 50°C using hydrochloric acid (8 and 10 M) and sulphuric acid (8 M) as re-extracting agents. The results obtained demonstrate that the process was efficient enough in relation to the chromium extraction, reaching to re-extraction percentage higher than 95 %.

Aplicação de microemulsão na recuperação de petróleo de reservatórios carbonáticos

The large investment in exploration activities offshore Brazil has generated new findings, generally in carbonate reservoirs, with different wettability conditions usually considered in the sandstone, strongly water-wet. In general, the carbonates reservoirs tend to be oil-wet, it difficult to mobilize of oil these reservoirs. These oils can be mobilized by different methods, or it may reverse the wettability of the surface of the reservoir and facilitate the flow of oil, improving production rates. Thus, the objective of this work was to study the influence of inversion on the wettability of the rock in the production and recovery of petroleum from carbonate reservoirs, using microemulsions. Three systems were chosen with different classes of surfactants: a cationic (C16TAB), an anionic (SDS) and nonionic (Unitol L90). Studies of the influence of salinity on the formation of the microemulsion as well as the characterization of fluids using density and viscosity measurements were also performed. To verify the potential of microemulsion systems in changing the wettability state of the chalk oil-wet to water-wet, contact angle measurements were performed using chalk of neutral-wet as surface material. Overall, with respect to the ionic character of the surfactants tested, the cationic surfactant (C16TAB) had a greater potential for reversal in wettability able to transform the rock wettability neutral to strongly water-wet, when compared with the anionic surfactant (SDS) and nonionic (Unitol L90), which showed similar behavior, improving the wettability of the rock to water. The microemulsions of all surfactants studied were effective in oil recovery, resulting in 76.92% for the system with C16TAB, 67.42% for the SDS and 66.30% for Unitol L90 of residual oil