Características limnológicas da coluna d'água e dos efluentes de viveiros de criação de camarões-da-amazônia

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Modal analysis of anisotropic diffused-channel waveguide by a scalar finite element method

A procedure to model optical diffused-channel waveguides is presented in this work. The dielectric waveguides present anisotropic refractive indexes which are calculated from the proton concentration. The proton concentration inside the channel is calculated by the anisotropic 2D-linear diffusion equation and converted to the refractive indexes using mathematical relations obtained from experimental data, the arbitrary refractive index profile is modeled by a. nodal expansion in the base functions. The TE and TM-like propagation properties (effective index) and the electromagnetic fields for well-annealed proton-exchanged (APE) LiNbO3 waveguides are computed by the finite element method.

Multiscale Fractal Descriptors and Polynomial Classifier for Partial Pixels Identification in Regions of Interest of Mammographic Images

Computer systems are used to support breast cancer diagnosis, with decisions taken from measurements carried out in regions of interest (ROIs). We show that support decisions obtained from square or rectangular ROIs can to include background regions with different behavior of healthy or diseased tissues. In this study, the background regions were identified as Partial Pixels (PP), obtained with a multilevel method of segmentation based on maximum entropy. The behaviors of healthy, diseased and partial tissues were quantified by fractal dimension and multiscale lacunarity, calculated through signatures of textures. The separability of groups was achieved using a polynomial classifier. The polynomials have powerful approximation properties as classifiers to treat characteristics linearly separable or not. This proposed method allowed quantifying the ROIs investigated and demonstrated that different behaviors are obtained, with distinctions of 90% for images obtained in the Cranio-caudal (CC) and Mediolateral Oblique (MLO) views.

Os problemas de espalhamento quântico em potenciais elementares

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A new Hemigrammus Gill from upper rio Parana system, Southeastern Brazil (Characiformes : Characidae)

Hemigrammus parana is described from the upper rio Parana system, in the area of influence of the Ilha Solteira reservoir in states of Mato Grosso do Sul, Minas Gerais and São Paulo, southeastern Brazil. The new species differs from all congeners by the combination of the following characters: absence of humeral spot; presence of a roughly triangular or rectangular conspicuous black caudal spot, extending from base to tip of middle caudal-fin rays, its greatest depth at base of caudal-fin rays; and anal-fin rays iii-iv, 18-23.

Microtensile bond strengths and scanning electron microscopic evaluation of self-adhesive and self-etch resin cements to intact and etched enamel

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Tunneling time through a barrier using the local value of a time operator

A time for a quantum particle to traverse a barrier is obtained for stationary states by setting the local value of a time operator equal to a constant. This time operator, called the tempus operator because it is distinct from the time of evolution, is defined as the operator canonically conjugate to the energy operator. The local value of the tempus operator gives a complex time for a particle to traverse a barrier. The method is applied to a particle with a semiclassical wave function, which gives, in the classical limit, the correct classical traversal time. It is also applied to a quantum particle tunneling through a rectangular barrier. The resulting complex tunneling time is compared with complex tunneling times from other methods.

Increase of temperature of an ideal nondegenerate quantum gas in a suddenly expanding box due to energy quantization

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Experimental aspects of biomass fuels in a bubbling fluidized bed combustor

This work presents experimental information relevant to the combustion of biomass in a bubbling fluidized bed. The biomass distribution in a fluidized bed was studied through tests performed in a cold bed, while the volatiles released in the biomass pyrolysis, the burning rate of the resulting charcoal, and the combustion control regime, were studied through tests performed in a high temperature bed.Visual examination of photographs taken from a transparent walls bed, with a rectangular cross-section, showed that the large fuel particles, typical of biomass processing, were distributed in the bubbles, in the splash zone, and in the emulsion phase. The occurrence of biomass in the emulsion phase was favored by burning biomass particles of greater density and smaller size-expetimentally determined in each case. Decreasing the fuel particle size improved the biomass distribution inside the bed. The same was accomplished by increasing the superficial gas velocity as high as possible, compatibly with the acceptable elutriation.Burning tests showed that the biomass fuels have the advantage of reaching the diffusional regime at temperatures that can be lower than 1000 K, which ensures that the biomass fuels burn in a stable regime. (C) 2007 Elsevier B.V. All rights reserved.

Erbium and ytterbium co-doped SiO2 : GeO2 planar waveguide prepared by the sol-gel route using an alternative precursor

The sol-gel method combined with a spin-coating technique has been successfully applied for the preparation of rare-earth doped silica:germania films used for the fabrication of erbium-doped waveguide amplifiers (EDWA), presenting several advantages over other methods for the preparation of thin films. As with other methods, the sol-gel route also shows some drawbacks, such as cracks related to the thickness of silica films and high hydrolysis rate of certain precursors such as germanium alkoxides. This article describes the preparation and optical characterization of erbium and ytterbium co-doped SiO2:GeO2 crack-free thick films prepared by the sol-gel route combined with a spin-coating technique using a chemically stable non-aqueous germanium oxide solution as an alternative precursor. The non-crystalline films obtained are planar waveguides exhibiting a single mode at 1,550 nm with an average thickness of 3.9 mu m presenting low percentages of porosity evaluated by the Lorentz-Lorenz Effective Medium Approximation, and low stress, according to the refractive index values measured in both transversal electric and magnetic polarizations. Weakly confining core layers (0.3% < Delta n < 0.75%) were obtained according to the refractive index difference between the core and buffer layers, suggesting that low-loss coupling EDWA may be obtained. The life time of the erbium I-4(13/2) metastable state was measured as a function of erbium concentration in different systems and based on these values it is possible to infer that the hydroxyl group was reduced and the formation of rare-earth clusters was avoided.

Taxonomy of Ophiuroidea (Echinonermata) from the continental shelf and slope of the southern and southeastern Brazilian coast

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influência do modelo de análise estatística e da forma das parcelas experimentais na seleção de clones de Eucalyptus spp.

Foram avaliadas três formas de parcelas experimentais (retangular, uma linha - linear e parcela de uma árvore - STP) em testes clonais de Eucalyptus spp, utilizando-se três experimentos, cada um com 18 clones. Foram usados três modelos de análise (mínimos quadrados ordinários - ANOVA tradicional, modelos mistos com fator clone fixo ou com fator clone aleatório - REML/BLUP). Os dois primeiros modelos apresentaram resultados similares. Com REML/BLUP houve estreitamento das predições em relação às amplitudes obtidas com as médias, e essa redução foi proporcionalmente maior com parcelas retangulares e STP. O ordenamento dos clones também foi similar com esses dois tipos de parcelas. É provável que com parcelas STP haja um balanço compensatório das alocompetições, pois se pode trabalhar com maior número de repetições e menor custo. Portanto, com parcelas STP haverá economia de recursos e sem prejuízos para o Programa de Melhoramento Florestal.

Composição florística e estrutura da comunidade de plantas do estrato herbáceo em áreas de cultivo de árvores frutíferas

O objetivo do presente trabalho foi caracterizar, em três épocas, a comunidade de plantas presentes em áreas de cultivo de abacateiro e de nogueira pecan, localizadas na Fazenda Experimental Lageado, da FCA-UNESP, município de Botucatu-SP. em decorrência da arquitetura da copa e do caráter decíduo das nogueiras, esta área apresenta-se mais ensolarada, o que produz condições ambientais diferentes entre as duas áreas estudadas. Foi estabelecida uma grade retangular composta de 55 parcelas quadradas, contíguas, com 5 m de lado, havendo 40 parcelas sob os abacateiros e 15 sob as nogueiras. As coletas foram realizadas em março, maio e agosto de 1993, quando foram sorteados quadrados de 1x 1 m em cada parcela, de forma a não haver coincidência entre as amostragens realizadas em cada época. Foram levantadas as espécies ocorrentes, sua porcentagem de cobertura e freqüência. Os dados foram analisados através de métodos multivariados, utilizando-se a Análise de Agrupamento para as seis situações (3 épocas x 2 ambientes). Foram coletadas, no total, 54 espécies, distribuídas em 38 gêneros e 19 famílias, sendo Asteraceae e Poaceae as que contribuíram com o maior número de espécies. A riqueza em espécies foi maior na área sob as nogueiras; em ambas as áreas, a riqueza foi maior na estação úmida. Sob os abacateiros, a porcentagem de cobertura total da comunidade apresentou pouca variação temporal, diferindo da área sob as nogueiras onde se observou flutuação deste parâmetro. O padrão de distribuição espacial, para quase todas as populações, foi do tipo agrupado. A similaridade florística foi maior entre as duas áreas dentro de cada época de coleta. A presença constante de espécies como Commelina nudiflora que contribuiu com valores elevados de cobertura nas três épocas de coleta, mostra a necessidade de utilizar métodos de controle permanentes na área do pomar estudado.

O problema de corte de placas defeituosas

O problema tratado neste trabalho consiste em cortar uma placa retangular em peças menores retangulares, de modo que a perda seja minimizada. A placa, entretanto, contém defeitos bem localizados. Propomos uma abordagem em grafo E/OU para representação das soluções possíveis e um método de enumeração implícita para determinar a solução ótima. Resultados computacionais demonstram a efetividade da abordagem.

O problema de corte de estoque em indústrias de móveis de pequeno e médio portes

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)