Particle Swarm Optimization Based Reactive Power Dispatch for Power Networks with Distributed Generation

Reactive power is critical to the operation of the power networks on both safety aspects and economic aspects. Unreasonable distribution of the reactive power would severely affect the power quality of the power networks and increases the transmission loss. Currently, the most economical and practical approach to minimizing the real power loss remains using reactive power dispatch method. Reactive power dispatch problem is nonlinear and has both equality constraints and inequality constraints. In this thesis, PSO algorithm and MATPOWER 5.1 toolbox are applied to solve the reactive power dispatch problem. PSO is a global optimization technique that is equipped with excellent searching capability. The biggest advantage of PSO is that the efficiency of PSO is less sensitive to the complexity of the objective function. MATPOWER 5.1 is an open source MATLAB toolbox focusing on solving the power flow problems. The benefit of MATPOWER is that its code can be easily used and modified. The proposed method in this thesis minimizes the real power loss in a practical power system and determines the optimal placement of a new installed DG. IEEE 14 bus system is used to evaluate the performance. Test results show the effectiveness of the proposed method.

Applying reactive models to column experiments to assess the hydrogeochemistry of seawater intrusion: optimising ACUAINTRUSION and selecting cation exchange coefficients with PHREEQC

Three sets of laboratory column experimental results concerning the hydrogeochemistry of seawater intrusion have been modelled using two codes: ACUAINTRUSION (Chemical Engineering Department, University of Alicante) and PHREEQC (U.S.G.S.). These reactive models utilise the hydrodynamic parameters determined using the ACUAINTRUSION TRANSPORT software and fit the chloride breakthrough curves perfectly. The ACUAINTRUSION code was improved, and the instabilities were studied relative to the discretisation. The relative square errors were obtained using different combinations of the spatial and temporal steps: the global error for the total experimental data and the partial error for each element. Good simulations for the three experiments were obtained using the ACUAINTRUSION software with slight variations in the selectivity coefficients for both sediments determined in batch experiments with fresh water. The cation exchange parameters included in ACUAINTRUSION are those reported by the Gapon convention with modified exponents for the Ca/Mg exchange. PHREEQC simulations performed using the Gains-Thomas convention were unsatisfactory, with the exchange coefficients from the database of PHREEQC (or range), but those determined with fresh water – natural sediment allowed only an approximation to be obtained. For the treated sediment, the adjusted exchange coefficients were determined to improve the simulation and are vastly different from those from the database of PHREEQC or batch experiment values; however, these values fall in an order similar to the others determined under dynamic conditions. Different cation concentrations were simulated using two different software packages; this disparity could be attributed to the defined selectivity coefficients that affect the gypsum equilibrium. Consequently, different calculated sulphate concentrations are obtained using each type of software; a smaller mismatch was predicted using ACUAINTRUSION. In general, the presented simulations by ACUAINTRUSION and PHREEQC produced similar results, making predictions consistent with the experimental data. However, the simulated results are not identical to the experimental data; sulphate (total S) is overpredicted by both models, most likely due to such factors as the kinetics of gypsum, the possible variations in the exchange coefficients due to salinity and the neglect of other processes.

Enhancement of the Electrochemical Performance of SWCNT dispersed in a Silica Sol-gel Matrix by Reactive Insertion of a Conducting Polymer

The electroassisted encapsulation of Single-Walled Carbon Nanotubes was performed into silica matrices (SWCNT@SiO2). This material was used as the host for the potentiostatic growth of polyaniline (PANI) to yield a hybrid nanocomposite electrode, which was then characterized by both electrochemical and imaging techniques. The electrochemical properties of the SWCNT@SiO2-PANI composite material were tested against inorganic (Fe3+/Fe2+) and organic (dopamine) redox probes. It was observed that the electron transfer constants for the electrochemical reactions increased significantly when a dispersion of either SWCNT or PANI was carried out inside of the SiO2 matrix. However, the best results were obtained when polyaniline was grown through the pores of the SWCNT@SiO2 material. The enhanced reversibility of the redox reactions was ascribed to the synergy between the two electrocatalytic components (SWCNTs and PANI) of the composite material.

Effects of Fe addition on the mechanical and thermo-mechanical properties of SiC/FeSi2/Si composites produced via reactive infiltration

Remaining silicon in SiC-based materials produced via reactive infiltration limits their use in high-temperature applications due to the poor mechanical properties of silicon: low fracture toughness, extreme fragility and creep phenomena above 1000 °C. In this paper SiC–FeSi2 composites are fabricated by reactive infiltration of Si–Fe alloys into porous Cf/C preforms. The resulting materials are SiC/FeSi2 composites, in which remaining silicon is reduced by formation of FeSi2. For the richest Fe alloys (35 wt% Fe) a nominal residual silicon content below 1% has been observed. However this, the relatively poor mechanical properties (bending strength) measured for those resulting materials can be explained by the thermal mismatch of FeSi2 and SiC, which weakens the interface and does even generate new porosity, associated with a debonding phenomenon between the two phases.

Coagent Modified Polypropylene Prepared by Reactive Extrusion: A New Look Into the Structure-Property Relations of Injection Molded Parts

Peroxide-mediated reactive extrusion of linear isotactic polypropylene (L-PP) was conducted in the presence of trimethylolpropane trimethacrylate (TMPTMA) and triallyl trimesate (TAM) coagents, using a twin screw extruder. The resulting coagent-modified polypropylenes (CM-PP) had higher viscosities and elasticities, as well as increased crystallization temperature compared to PP reacted only with peroxide (DCP-PP). Additionally, deviations from terminal flow, and strain hardening were observed in PP modified with TAM, signifying the presence of long chain branching (LCB). The CM-PP formulations retained the modulus and tensile strength of the parent L-PP, in spite of their lower molar mass and viscosities, whereas their elongation at break and the impact strength were better. This was attributed to the finer spherulitic structure of these materials, and to the disappearance of the skin-core layer in the injection molded specimens.

Europe’s reactive and protective muddling through: the results of a summit in fire fighting mode. EPC Post-Summit Analysis, 19 October 2015

The EU’s October summit was dominated by one issue; the migration and refugee crisis, with EU leaders intent on putting on a public display of unity after weeks of bitter arguments, and concentrating on fire-fighting and immediate measures to tackle the most pressing reasons for, and impacts of, the crisis. Longer-term measures to address some of the root causes of increased migratory flows, support for the integration of newly arrived refugees or the introduction of new channels of legal migration, were not discussed. The Summit also spent little time on two issues that had originally been expected to be a key part of the agenda: the forthcoming British referendum on EU membership, where irritation with the slow pace of talks and British vagueness about its demands were in evidence; and the governance of Economic and Monetary Union (EMU), where EU leaders missed another opportunity for a thorough debate about future perspectives on the basis of the ‘Five Presidents’ Report’.

Reactive, Slow and...Innovative? Decision-making Structures and Policy Outputs

Consensus democracies like Switzerland are generally known to have a low innovation capacity (Lijphart 1999). This is due to the high number of veto points such as perfect bicameralism or the popular referendum. These institutions provide actors opposing a policy with several opportunities to block potential policy change (Immergut 1990; Tsebelis 2002). In order to avoid a failure of a process because opposing actors activate veto points, decision-making processes in Switzerland tend to integrate a large number of actors with different - and often diverging - preferences (Kriesi and Trechsel 2008). Including a variety of actors in a decision-making process and taking into account their preferences implies important trade-offs. Integrating a large number of actors and accommodating their preferences takes time and carries the risk of resulting in lowest common denominator solutions. On the contrary, major innovative reforms usually fail or come only as a result of strong external pressures from either the international environment, economic turmoil or the public (Kriesi 1980: 635f.; Kriesi and Trechsel 2008; Sciarini 1994). Standard decision-making processes are therefore characterized as reactive, slow and capable of only marginal adjustments (Kriesi 1980; Kriesi and Trechsel 2008; Linder 2009; Sciarini 2006). This, in turn, may be at odds with the rapid developments of international politics, the flexibility of the private sector, or the speed of technological development.

An in-situ permeable reactive barrier for the treatment of hexavalent chromium and trichloroethylene in ground water /

"Project Officer, Robert W. Puls, Subsurface Protection and Remediation Division."

Discoloration and mineralization of Reactive Red HE-3B by heterogeneous photo-Fenton reaction

Discoloration and mineralization of Reactive Red HE-3B were studied by using a laponite clay-based Fe nanocomposite (Fe-Lap-RD) as a heterogeneous catalyst in the presence of H2O2 and UV light. Our experimental results clearly indicate that Fe-Lap-RD mainly consists of Fe2O3 (meghemite) and Fe2Si4O10(OH)2 (iron silicate hydroxide) which have tetragonal and monoclinic structures, respectively, and has a high specific surface area (472m(2) / g) as well as a high total pore volume (0.547 cm(3)/g). It was observed that discoloration of HE-3B undergoes a much faster kinetics than mineralization of HE-3B. It was also found that initial HE-3B concentration, H2O2 concentration, UV light wavelength and power, and Fe-Lap-RD catalyst loading are the four main factors that can significantly influence the mineralization of HE-3B. At optimal conditions, complete discoloration of 100 mg/L HE-3B can be achieved in 30 min and the total organic carbon removal ratio can attain 76% in 120 min, illustrating that Fe-Lap-RD has a high photo-catalytic activity in the photo-assisted discoloration and mineralization of HE-3B in the presence of UV light (254nm) and H2O2. (C) 2003 Elsevier Science Ltd. All rights reserved.

Cross-reactive recognition of human and primate cytomegalovirus sequences by human CD4 cytotoxic T lymphocytes specific for glycoprotein B and H

Although the importance of CD4(+) T cell responses to human cytonnegalovirus (HCMV) has recently been recognized in transplant and immunosuppressed patients, the precise specificity and nature of this response has remained largely unresolved. In the present study we have isolated CD4(+) CTL which recognize epitopes from HCMV glycoproteins gB and gH in association with two different HLA-DR antigens, DRA1*0101/DRB1*0701 (DR7) and DRA1*0101/DRB1*1101 (DR11). Comparison of amino acid sequences of HICMV isolates revealed that the gB and gH epitope sequences recognized by human CD4(+) T cells were not only conserved in clinical isolates from HCMV but also in CMV isolates from higher primates (chimpanzee, rhesus and baboon). Interestingly, these epitope sequences from chimpanzee, rhesus and baboon CMV are efficiently recognized by human CD4(+) CTL. More importantly, we show that gB-specific T cells from humans can also efficiently lyse pepticle-sensitized Patr-DR7(+) cells from chimpanzees. These findings suggest that conserved gB and gH epitopes should be considered while designing a prophylactic vaccine against HCMV. In addition, they also provide a functional basis for the conservation of MHC class 11 lineages between humans and Old World primates and open the possibility for the use of such primate models in vaccine development against HCMV.

C-reactive protein, cardiovascular risk, and renal disease in a remote Australian Aboriginal community

Rates of cardiovascular and renal disease in Australian Aboriginal communities are high, but we do not know the contribution of inflammation to these diseases in this setting. In the present study, we sought to examine the distribution of C-reactive protein (CRP) and other markers of inflammation and their relationships with cardiovascular risk markers and renal disease in a remote Australian Aboriginal community. The study included 237 adults (58% of the adult population) in a remote Aboriginal community in the Northern Territory of Australia. Main outcome measures were CRP, fibrinogen and lgG concentrations, blood pressure (BP), presence of diabetes, lipids, albuminuria, seropositivity to three common micro-organisms, as well as carotid intima-media thickness (IMT). Serum concentrations of CRP [7 (5-13) mg/l; median (inter-quartile range)] were markedly increased and were significantly correlated with fibrinogen and lgG concentrations and inversely correlated with serum albumin concentration. Higher CRP concentrations were associated with lgG seropositivity to Helicobacter pylori and Chlamydia pneumoniae and higher lgG titre for cytomegalovirus. Higher CRP concentrations were associated with the following: the 45-54-year age group, female subjects, the presence of skin sores, higher body mass index, waist circumference, BP, glycated haemoglobin and greater albuminuria. CRP concentrations increased with the number of cardiovascular risk factors, carotid IMT and albuminuria independently of other risk factors. These CRP concentrations were markedly higher than described in other community settings and are probably related, in a large part, to chronic and repeated infections. Their association with markers of cardiovascular risk and renal disease are compatible with the high rates of cardiovascular and renal disease in this community, and provide more evidence of strong links between these conditions, through a shared background of infection/inflammation. This suggests that a strong focus on prevention and management of infections will be important in reducing these conditions, in addition to interventions directed at more traditional risk factors.