Effects of orange winemaking variables on antioxidant activity and bioactive compounds

AbstractAscorbic acid, carotenoids and polyphenols stand out among the orange juice natural antioxidants. The winemaking process affects their bioavailability and bioactivity. Antioxidant activities (AA) were estimated in different process conditions to asses those properties. The AA and their correlation with ascorbic acid, total phenolics and carotenoids content were calculated. The variables and levels analyzed were: pasteurized and natural must (PJ and NJ), pH 3.5 and 4.0 and fermentation temperatures at 10°C and 20°C. Statistically significant differences (α=0.05) were found among bioactive compounds concentrations. Antioxidant compounds concentration was higher in raw material than in orange wine. Juice pasteurization caused the major losses while subsequent vinification affects them to a lesser extent. Highest antioxidants retention was measured in wines from JN fermented at pH 3.5 and 10 °C (JN-3.5-10) followed by wines from JP and fermented at the same conditions (JP-3.5-10). AA determined by DPPH showed a positive and close correlation with FRAP, while ABTS showed a low correlation with former assays. Juice pasteurization process and fermentation temperature influenced bioactive compound reduction which correlates with the AA variation.

Chemical, morphological, and thermogravimetric of Terminalia catappa Linn

The objective of this study is to evaluate the chemical composition, morphology, and the thermogravimetric behavior of the pulp of Terminalia catappa, also known as tropical almond. The analytical results show, based mainly on its lipid content, that this fruit has a considerable energy value. Its fiber content contributes to enhance the functional properties of the fruit. Morphological characteristics show a spongy-like structure with dispersion of starch granules and high concentration of fiber bundles, confirming the results of the chemical composition analysis. The thermogravimetric behavior exhibited by this fruit pulp when submitted to progressive temperature increase under dynamic air atmosphere shows that this raw material has great potential for industrial use due to its high absorption rate of water soluble and/or lipid-based compounds, allowing its use as a dietary complement or supplement ingredient in food products.

Enhancement of ultrafiltration process by pretreatment in recovery of hemicelluloses from wood extracts

Hemicelluloses are potential raw material for several items produced in future wood-based biorefineries. One possible method for recovering hemicelluloses from wood extracts is ultrafiltration (UF). However, low filtration capacities and severe fouling restrict the use of tight UF membranes in the treatment of wood extracts. The lack of suitable commercial membranes creates a need for pretreatment which would decrease fouling and increase the filtration capacity. This thesis focuses on the evaluation of the possibility to improve the filtration capacity and decrease fouling with the pretreatment of wood extracts. Methods which remove harmful compounds and methods which degrade them are studied, as well as combinations of the methods. The tested pretreatments have an influence on both the concentration of different compounds and the molecular mass distribution of the compounds in the extract. This study revealed that in addition to which kind of compounds were removed, also the change in molecular size distribution affected the filtration capacity significantly. It was shown that the most harmful compounds for the filtration capacity of the hydrophobic 5 kDa membrane were the ones capable of permeating the membrane and fouling also the inner membrane structure. Naturally, the size of the most harmful compounds depends on the used UF membrane and is thus case-specific. However, in the choice of the pretreatment method, the focus should be on the removal of harmful compound sizes rather than merely on the total amount of removed foulants. The results proved that filtration capacity can be increased with both adsorptive and oxidative pretreatments even by hundreds of per cents. For instance, the use of XAD7 and XAD16 adsorbents increased the average flux in the UF of a birch extract from nearly zero to 107 kg/(m2h) and 175 kg/(m2h), respectively. In the treatment of a spruce extract, oxidation by pulsed corona discharge (PCD) increased the flux in UF from 46 kg/(m2h) to 158 kg/(m2h). Moreover, when a birch extract batch was treated with laccase enzyme, the flux in UF increased from 15 kg/(m2h) to 36 kg/(m2h). However, fouling was decreased only by adsorptive pretreatment while oxidative methods had a negligible or even negative impact on it. This demonstrates that filtration capacity and fouling are affected by different compounds and mechanisms. The results of this thesis show that filtration capacity can be improved and fouling decreased through appropriate pretreatment. However, the choice of the best possible pretreatment is case-specific and depends on the wood extract and the membrane used. Finding the best option requires information on the extract content and membrane characteristics as well as on the filtration performance of the membrane in the prevailing conditions and a multivariate approach. On the basis of this study, it can be roughly concluded that adsorptive pretreatment improves the filtration capacity and decreases fouling rather reliably, but it may lead to significant hemicellulose losses. Oxidation reduces the loss of valuable hemicelluloses and could improve the filtration capacity, but fouling challenges may remain. Combining oxidation with adsorptive pretreatment was not a solution for avoiding hemicellulose losses in the tested cases.

Kartoitus Kaakkois-Suomen jätelietteistä, lietteen tuottajista ja käsittelymenetelmistä

In this thesis the sludge of Southeastern-Finland, the companies which produce sludge and the current methods and those still in development have been surveyed. 85 % of the waste sludge from industry comes from forest industries. The sludge from municipal waste water treatment plants is mostly used as a raw material for bioplants. The sludge from forest industry is mostly incinerated. New circulation methods increase the recycling value of the waste by creating new products but they still lack a full-scale plant. The political pressure from Europe and the politics driven by the government of Finland will drive circular economy forward and thus uplifting the processing options of waste slurries. This work is divided in two parts, first contains the survey and the second contains the experimental part and the operational methods based on the survey. In the experimental part wet hard sheet waste sludge was de-watered with shaking filter and the applications for waste sludge from cellulose factory were considered. The results are, that the wet hard sheet waste sludge can be dewatered to high enough total solids content for the inteded use. Also, the cellulose waste sludge has too high Cd content in almost all of the batches to be used as a land improment.

Derivative hedging strategies for bitumen price risk

The objective of the study is to extend the existing hedging literature of the commodity price risks by investigating what kind of hedging strategies can be used in companies using bitumen as raw material in their production. Five different alternative swap hedging strategies in bitumen markets are empirically tested. Strategies tested are full hedge strategy, simple, conservative, and aggressive term structure strategies, and implied volatility strategy. The effectiveness of the alternative strategies is measured by excess returns compared to no hedge strategy. In addition, the downside risk of each strategy is measured with target absolute semi-deviation. Results indicate that any of the tested strategies does not outperform the no hedge strategy in terms of excess returns in all maturities. The best-performing aggressive term structure strategy succeeds to create positive excess returns only in short maturities. However, risk seems to increase hand-in-hand with the excess returns so that the best-performing strategies get the highest risk metrics as well. This implicates that the company willing to gain from favorable price movements must be ready to bear a greater risk. Thus, no superior hedging strategy over the others is found.

A reaction engineering approach to homogeneously catalyzed glycerol hydrochlorination

The production of biodiesel through transesterification has created a surplus of glycerol on the international market. In few years, glycerol has become an inexpensive and abundant raw material, subject to numerous plausible valorisation strategies. Glycerol hydrochlorination stands out as an economically attractive alternative to the production of biobased epichlorohydrin, an important raw material for the manufacturing of epoxy resins and plasticizers. Glycerol hydrochlorination using gaseous hydrogen chloride (HCl) was studied from a reaction engineering viewpoint. Firstly, a more general and rigorous kinetic model was derived based on a consistent reaction mechanism proposed in the literature. The model was validated with experimental data reported in the literature as well as with new data of our own. Semi-batch experiments were conducted in which the influence of the stirring speed, HCl partial pressure, catalyst concentration and temperature were thoroughly analysed and discussed. Acetic acid was used as a homogeneous catalyst for the experiments. For the first time, it was demonstrated that the liquid-phase volume undergoes a significant increase due to the accumulation of HCl in the liquid phase. Novel and relevant features concerning hydrochlorination kinetics, HCl solubility and mass transfer were investigated. An extended reaction mechanism was proposed and a new kinetic model was derived. The model was tested with the experimental data by means of regression analysis, in which kinetic and mass transfer parameters were successfully estimated. A dimensionless number, called Catalyst Modulus, was proposed as a tool for corroborating the kinetic model. Reactive flash distillation experiments were conducted to check the commonly accepted hypothesis that removal of water should enhance the glycerol hydrochlorination kinetics. The performance of the reactive flash distillation experiments were compared to the semi-batch data previously obtained. An unforeseen effect was observed once the water was let to be stripped out from the liquid phase, exposing a strong correlation between the HCl liquid uptake and the presence of water in the system. Water has revealed to play an important role also in the HCl dissociation: as water was removed, the dissociation of HCl was diminished, which had a retarding effect on the reaction kinetics. In order to obtain a further insight on the influence of water on the hydrochlorination reaction, extra semi-batch experiments were conducted in which initial amounts of water and the desired product were added. This study revealed the possibility to use the desired product as an ideal “solvent” for the glycerol hydrochlorination process. A co-current bubble column was used to investigate the glycerol hydrochlorination process under continuous operation. The influence of liquid flow rate, gas flow rate, temperature and catalyst concentration on the glycerol conversion and product distribution was studied. The fluid dynamics of the system showed a remarkable behaviour, which was carefully investigated and described. Highspeed camera images and residence time distribution experiments were conducted to collect relevant information about the flow conditions inside the tube. A model based on the axial dispersion concept was proposed and confronted with the experimental data. The kinetic and solubility parameters estimated from the semi-batch experiments were successfully used in the description of mass transfer and fluid dynamics of the bubble column reactor. In light of the results brought by the present work, the glycerol hydrochlorination reaction mechanism has been finally clarified. It has been demonstrated that the reactive distillation technology may cause drawbacks to the glycerol hydrochlorination reaction rate under certain conditions. Furthermore, continuous reactor technology showed a high selectivity towards monochlorohydrins, whilst semibatch technology was demonstrated to be more efficient towards the production of dichlorohydrins. Based on the novel and revealing discoveries brought by the present work, many insightful suggestions are made towards the improvement of the production of αγ-dichlorohydrin on an industrial scale.

L’apolipoprotéine A-I interagit avec l’adhésine impliquée dans l’adhérence diffuse (AIDA-I) d’Escherichia coli : rôle lors du processus d’adhésion et d’invasion

L’adhésine impliquée dans l’adhérence diffuse (AIDA-I) est une adhésine bactérienne présente chez certaines souches d’Escherichia coli qui, associée aux toxines Stx2e ou STb, contribue à l’apparition de la maladie de l’œdème ou de la diarrhée post-sevrage chez les porcelets. AIDA-I est un autotransporteur qui confère des capacités d’autoaggrégation, de formation de biofilms et d’adhésion. L’objectif principal du projet de recherche consistait en la recherche de récepteur(s) potentiel(s) d’AIDA-I. Les bactéries pathogènes adhèrent aux cellules-cibles soit en liant directement des molécules à la surface cellulaire ou en utilisant des molécules intermédiaires qui permettent de diminuer la distance séparant la bactérie de la cellule-cible. Puisque le sérum est un fluide qui contient de nombreuses molécules, celui-ci a été utilisé comme matériel de départ pour l’isolement de récepteur(s) potentiels. Nous avons isolé un récepteur potentiel à partir du sérum porcin : l’apolipoprotéine A-I. L’interaction entre l’apolipoprotéine A-I et AIDA-I a été confirmée par ELISA et microscopie à fluorescence. La capacité à envahir les cellules épithéliales offre aux pathogènes la possibilité d’établir une niche intracellulaire qui les protègent contre les attaques du milieu extérieur. La présente étude a démontré que la présence d’AIDA-I en tant que seul facteur de virulence chez une souche de laboratoire permet de conférer la capacité d’envahir les cellules sans promouvoir la survie intracellulaire. L’étude de la souche sauvage 2787, exprimant AIDA-I en association avec d’autres facteurs de virulence, a démontré une différence significative pour les phénotypes d’invasion et de survie intracellulaire face à la souche de laboratoire exprimant AIDA-I.

Préhistoire de la Moyenne-Côte-Nord : le chert de la Minganie et l’utilisation des ressources lithiques

Ce mémoire traite de l’utilisation des matières premières lithiques telle que représentée sur les sites préhistoriques de la Moyenne-Côte-Nord du Golfe du Saint-Laurent, au Québec. Cette étude régionale se base sur la réanalyse d’un nombre important de collections archéologiques et accorde une grande importance à l’identification et à la description des matières premières utilisées. Un matériau d’origine locale, le Chert de la Minganie, y occupe une place particulière. L’importance de ce matériau pour la préhistoire régionale était jusqu’ici virtuellement inconnue. Suite à nos analyses, un inventaire complet des matières premières utilisées est mis sur pied. Ces données mettent en évidence un certain nombre de comportements. Principalement, nous identifions deux ensembles qui illustrent la présence de territoires attribuables à la répartition de groupes amérindiens subrégionaux (bandes). Finalement, à travers l’utilisation des ressources lithiques, les liens qui rattachent les groupes de notre région d’étude à ceux de la péninsule du Québec-Labrador sont illustrés.

Le Sylvicole inférieur au Méganticois : le cas du site Nepress (BiEr-21)

La découverte du site Nepress (BiEr-21) en 2004 et les saisons de fouilles subséquentes ont permis de découvrir de nombreux vestiges archéologiques. Ce mémoire a donc pour objectif de déterminer l’identité culturelle des occupants qui ont fréquenté le site, en prenant en considération les activités rituelles et la stratégie d’approvisionnement en matière lithique. Pour y parvenir, une analyse morpho-métrique de l’assemblage lithique a été effectuée. La distribution intra-site des artéfacts a également été prise en considération lors de l’analyse. Une séquence chronologique du Nord-Est américain remontant au Sylvicole inférieur est présentée dans ce mémoire. Une période d’occupation semble dominer sur le site Nepress, soit le Sylvicole inférieur. Cette manifestation est caractérisée par la présence d’artéfacts diagnostiques de la culture Meadowood. Ces objets sont un grattoir triangulaire bifacial Meadowood, ainsi qu’une imitation de pointe de type box-base.

L’inconscient tactile, ou, Les échos de la chair dans l’image

Dans la présente thèse, nous cherchons à comprendre comment l’image peut éclairer les questions de survivance et de transmission des traces psychiques et culturelles, à travers la notion d’un inconscient tactile. L’image n’est pas seulement simulacre, elle est présence porteuse de la trace psychique, de l’empreinte du réel, présentée à la perception pour en permettre la connaissance. Cette approche de l’image permet de mettre en lumière et d’expérimenter le lien qui existe entre mémoire et sensation, lorsque se dessine l’aptitude de l’image à conserver les traces vives d’une modification plastique imprimée dans la matière et à raviver la charge sensorielle du souvenir. Au fond de l’image, c’est principalement la persistance d’un inconscient, dans sa dimension tactile, que nous explorons. L’étude de ce médium capable d’actualiser l’inconscient tactile devient aussi une occasion, un prétexte, pour articuler une compréhension du point de contact où l’individu se relie à ses semblables et où il entre dans la vie de relation. Nous examinons donc comment l’image occupe une fonction carrefour entre le phénomène de la représentation et celui de la présentation, puis comment le mouvement de l’image vers la matière brute du souvenir fait d’elle un vecteur de plasticité psychique, de remaniement des traces et de créativité. Par ailleurs, nous suggérons que l’appareil perceptuel de l’homme, qui le rend capable d’être ému et sensible à une image artistique, de se laisser toucher par la présence tangible d’une œuvre, est le même qui permet que l’homme s’identifie à son semblable et éprouve de l’empathie à son égard. En ce sens, un parallèle est tracé entre le travail de l’image et le travail de culture. La façon dont certaines formes d’art contemporain s’appliquent à jouer avec les modalités du sensible est cependant aussi soumise à des limites qui sont inhérentes à la matière, comme nous le démontrons dans une réflexion sur les avatars d’une certaine postmodernité.

L’exploitation du phoque dans le secteur de l’embouchure du Saguenay (Québec, Canada) par les Iroquoiens au Sylvicole supérieur(1000-1534 de notre ère)

Au cours du Sylvicole supérieur (1000-1500 AD), le secteur de l’embouchure du Saguenay aurait été exploité par des groupes Iroquoiens du Saint-Laurent en quête de ressources marines, et plus particulièrement du phoque. Ces groupes provenaient vraisemblablement de la région de Québec où se trouvaient leurs camps de base et auraient ainsi développé une forme d’adaptation aux ressources marines de l’estuaire, faisant d’eux les groupes iroquoiens les plus mobiles de toute la vallée du Saint-Laurent. Dans cette étude, nous proposons que l’exploitation des mammifères marins fût pratiquée en deux temps, d’abord au printemps, lors de courtes périodes par des contignents de chasseurs masculins attirés par le phoque du Groenland et puis en été, par des familles entières profitant de la présence de phoques gris et commun. Les pinnipèdes étaient probablement traqués sur la batture ou sur les glaces et abattus à la hache ou à l’arc et à la flèche. Puisque les résidus alimentaires retrouvés dans les vases de cuisson étaient surtout composés de poissons et de mammifères terrestres, il est supposé que des sous-produits de la chasse au phoque aient été rapportés dans la région de Québec et utilisés comme réserve de nourriture, comme matière première ou comme monnaie d’échange. Nous défendons également l’hypothèse que ces excursions dans l’estuaire n’étaient pas nécessairement liées à la précarité de l’agriculture dans la région de Québec puisque cette pratique aurait été adoptée tardivement, soit après 1300 AD et peut être même à partir de 1400 AD. Les données sont issues de six sites ayant fait l’objet de fouilles répartis sur une bande littorale de 40 km de longueur. Il s’agit des sites Ouellet (DaEk-6), Anse-aux-Pilotes IV (DbEj-7), Cap-de-Bon-Désir (109G), Site archéologique des Basques-de-l’Anse-à-la-Cave (DbEi-5), Pointe-à-Crapaud (DbEi-2) et Escoumins I (DcEi-1).

Chert Nastapoka : caractérisation chimique et exploitation au Paléoesquimau, baie d’Hudson, Nunavik

Les assemblages lithiques dominent la plupart des sites archéologiques du Nunavik et constituent ainsi une véritable mine d’informations. Le nombre limité de travaux sur les matériaux de la côte est de la baie d’Hudson, nous a amené à nous pencher sur une source présente dans ce secteur. Notre objectif était alors de caractériser la matière première provenant de cette formation géologique, le chert Nastapoka. Pour ce faire, nous avons choisi la technique de fluorescence aux rayons X. Les résultats ont permis de constater, en plus des observations macroscopiques, la nature très variable de ce chert présentant une signature chimique complexe. Pour compléter le portrait, nous avons évalué l’utilisation du chert Nastapoka par les Paléoesquimaux par une comparaison d’analyses technologiques déjà effectuées sur les sites GhGk-4, GhGk-63 et IcGm-5. Cet examen a révélé que l’évolution des stratégies d’exploitation des matériaux lithiques dans cette région appui le continuum culturel Prédorsétien-Dorsétien observé ailleurs.

Studies on the Production, Properties and Processability of Low Protein Latex

Latex protein allergy is a serious problem faced by users of natural rubber latex products. This is severe in health care workers, who are constantly using latex products like examination gloves, surgical gloves etc. Out of the total proteins only a small fraction is extractable and only these proteins cause allergic reactions in sensitized people. Enzymic deproteinisation of latex and leaching and chlorination of latex products are the common methods used to reduce the severity of the problem.Enzyme deproteinisation is a cubersome process involving high cost and process loss.Physical properties of such films are poor. Leaching is a lengthy process and in leached latex products presence of extractable proteins is observed on further storing. Chlorination causes yellowing of latex products and reduction in tensile properties.In this context a more simple process of removal of extractable proteins from latex itself was investigated. This thesis reports the application of poly propylene glycol (PPG) to displace extractable proteins from natural latex. PPG is added to 60 % centrifuged natural latex to the extent of 0.2 % m/rn, subssequently diluted to 30 % dry rubber content and again concentrated to obtain a low protein latex.Dilution of concentrated latex and subsequent concentration lead to a total reduction in non - rubber solids in the concentrate, especially proteins and reduction in the ionic concentration in the aqueous phase of the latex. It has been reported that proteins in natural rubber / latex affect its behaviour in the vulcanisation process. Ionic concentration in the aqueous phase of latex influence the stability, viscosity and flow behaviour of natural latex. Hence, a detailed technological evaluation was carried out on this low protein latex. In this study, low protein latex was compared with single centrifuged latex ( the raw material to almost every latex product), double centrifuged latex ( because dilution and second concentration of latex is accompanied by protein removal to some extent and reduction in the ionic concentration of the aqueous phase of latex.). Studies were conducted on Sulphur cure in conventional and EV systems under conditions of post ~ cure and prevulcanisation of latex. Studies were conducted on radiation cure in latex stage. Extractable protein content in vulcanised low protein latex films are observed to be very low. lt is observed that this low protein latex is some what slower curing than single centrifuged latex, but faster than double centrifuged latex. Modulus of low protein latex films were slightly low. In general physical properties of vulcanised low protein latex films are only siightly lower than single centrifuged latex. Ageing properties of the low protein latex films were satisfactory. Viscosity and flow behaviour of low protein latex is much better than double centrifuged latex and almost comparable to single centrifuged latex. On observing that the physical properties and flow behaviour of low protein latex was satisfactory, it was used for the preparation of examination gloves and the gloves were evaluated. It is observed that the properties are conforming to the Indian Standard Specifications. It is thus observed that PPG treatment of natural latex is a simple process of preparing low protein latex. Extractable protein content in these films are very low.The physical properties of the films are comparable to ordinary centrifuged latex and better than conventionally deprotenized latex films. This latex can be used for the production of examination gloves.

Inventory management in public sector electrical industry in Kerala

The thesis entitled Inventory Management In Public Sector Electrical Industry In Kerala. Investigations were carried out on inventory management in public sector electrical industry in Kerala and suggest methods to improve their efficiency. Various aspects of inventory management, its scope and need in industry are detailed. The objectives of the present study concentrates to get an overall view of the system of inventory management, assess the positions and levels of inventory. It analyzes the inventory management policies and practices, the organizational set-up for materials by the electrical undertakings. The study examines the liquidity of the electrical undertakings as well as techniques of inventory management in the electrical industry in Kerala. Hypotheses state that the existing organizational systems and practices are inadequate to ensure efficient management of inventories in electrical industry. Introduction of scientific inventory techniques has a favourable effect on the workings of inventory departments. The financial performance of the public sector electrical undertakings is not at all satisfactory on account of the high raw material costs, heavy borrowings and huge interest burdens. The scope of this study is limited to the assessment of savings, in inventories of electrical products due to inventory management. The methodology of the study is to project the cost reduction of the inventory department on the basis of data collected and to validate this projection with the aid of analysis and survey. The limitations of the study is that the data obtained relate to the period 1989-90 and earlier and the current position is not available and uniform norms cannot be applied to evaluate different inventory management organisation.

A Study Of The Textile Industry In Kerala With Comparative Reference To Tamil Nadu

. The cotton mill industry is one of the important medium and large-scale industries in the State of Kerala. Due to the widespread development of the handloom industry in the State, there is an environment conducive to the growth of cotton spinning mills which produce yarn, the raw material required by the handloom industry. New spin— ing mills are being commissioned. But the performance of the existing cotton spinning and weaving mills in the State is not quite satisfactory. Hence an analysis has been carried out into the profitability and financial position of the industry in Kerala. The objective of the study is to make a financial analysis of the industry covering various aspects such as cost structure, productivity, asset structure, financial structure and working capital management.