Investigation of Techniques for Accelerating the Construction of Bridge Deck Overlays, 2016

Use of bridge deck overlays is important in maximizing bridge service life. Overlays can replace the deteriorated part of the deck, thus extending the bridge life. Even though overlay construction avoids the construction of a whole new bridge deck, construction still takes significant time in re-opening the bridge to traffic. Current processes and practices are time-consuming and multiple opportunities may exist to reduce overall construction time by modifying construction requirements and/or materials utilized. Reducing the construction time could have an effect on reducing the socioeconomic costs associated with bridge deck rehabilitation and the inconvenience caused to travelers. This work included three major tasks with literature review, field investigation, and laboratory testing. Overlay concrete mix used for present construction takes long curing hours and therefore an investigation was carried out to find fast-curing concrete mixes that could reduce construction time. Several fast-cuing concrete mixes were found and suggested for further evaluation. An on-going overlay construction project was observed and documented. Through these observations, several opportunities were suggested where small modifications in the process could lead to significant time savings. With current standards of the removal depth of substrate concrete in Iowa, it takes long hours for the removal process. Four different laboratory tests were performed with different loading conditions to determine the necessary substrate concrete removal depth for a proper bond between the substrate concrete and the new overlay concrete. Several parameters, such as failure load, bond stress, and stiffness, were compared for four different concrete removal depths. Through the results and observations of this investigation several conclusions were made which could reduce bridge deck overlay construction time.

Low Cost Techniques of Base Stabilization, HR-312, Construction Report, 1989

This research project was initiated in 1988 to study the effectiveness of four different construction techniques for establishing a stable base on a granular surfaced roadway. After base stabilization, the roadway was then seal coated, eliminating dust problems associated with granular surfaced roads. When monies become available, the roadway can be surfaced with a more permanent structure. A 2.8 mile section of the Horseshoe Road in Dubuque County was divided into four divisions for the study. This report discusses the procedures used during construction of these different divisions. Problems and possible solutions have been analyzed to better understand the capabilities of the materials and construction techniques used on the project.

What matters for predicting spatial distributions of trees: techniques, data, or species' characteristics?

Data characteristics and species traits are expected to influence the accuracy with which species' distributions can be modeled and predicted. We compare 10 modeling techniques in terms of predictive power and sensitivity to location error, change in map resolution, and sample size, and assess whether some species traits can explain variation in model performance. We focused on 30 native tree species in Switzerland and used presence-only data to model current distribution, which we evaluated against independent presence-absence data. While there are important differences between the predictive performance of modeling methods, the variance in model performance is greater among species than among techniques. Within the range of data perturbations in this study, some extrinsic parameters of data affect model performance more than others: location error and sample size reduced performance of many techniques, whereas grain had little effect on most techniques. No technique can rescue species that are difficult to predict. The predictive power of species-distribution models can partly be predicted from a series of species characteristics and traits based on growth rate, elevational distribution range, and maximum elevation. Slow-growing species or species with narrow and specialized niches tend to be better modeled. The Swiss presence-only tree data produce models that are reliable enough to be useful in planning and management applications.

Nouvelles techniques de stimulation cérébrale: perspectives thérapeutiques en psychiatrie [Novel brain stimulation techniques: therapeutic perspectives in psychiatry]

Recent advances have allowed the development of new physical techniques in neurology and psychiatry, such as Transcranial Magnetic Stimulation (TMS), Vagus Nerve Stimulation (VNS), and Deep Brain Stimulation (DBS). These techniques are already recognized as therapeutic approaches in several late stage refractory neurological disorders (Parkinson's disease, tremor, epilepsy), and currently investigated in psychiatric conditions, refractory to medical treatment (obsessive-compulsive disorder, resistant major depression). In Paralell, these new techniques offer a new window to understand the neurobiology of human behavior.

Techniques de "non-fusion" en chirurgie rachidienne [Non fusion techniques in spinal surgery]

In order to prevent adjacent segment degeneration following spinal fusion new techniques are being used. Lumbar disc arthroplasty yields mid term results equivalent to those of spinal fusion. Cervical disc arthroplasty is indicated in the treatment of cervicobrachialgia with encouraging initial results. The ability of arthroplasty to prevent adjacent segment degeneration has yet to be proven. Although dynamic stabilization had not been proven effective in treating chronic low back pain, it might be useful following decompression of lumbar spinal stenosis in degenerative spondylolisthesis. Interspinal devices are useful in mild lumbar spinal stenosis but their efficacy in treating low back pain is yet to be proven. Confronted with a growing number of new technologies clinicians should remain critical while awaiting long term results.

Personnels contractuels techniques et administratifs du Centre national de la recherche scientifique . Services extérieurs. [Décrets des 28 mai 1952, 14 novembre et 7 décembre 1955 ; arrêté du 14 novembre 1955, du Ministre de l'Education nationale.]

[Code]

Study of fish swimming activity using Acoustical Doppler Velocimetry (ADV) techniques

Peer reviewed

Purification and fractionation by nanotiltration in dairy and sugar and sweetener industry applications

Nanotiltration is a membrane separation method known for its special characteristic of rejecting multivalent ions and passing monovalent ions. Thus, it is commonly applied with dilute aqueous solutions in partial salt removal, like in drinking water production. The possibilities of nanofiltration have been studied and the technique applied in a wide branch of industries, e.g. the pulp and paper, the textile and the chemical processing industry. However, most present applications and most of the potential applications studied involve dilute solutions, the permeating stream being generally water containing monovalent salts. In this study nanotiltration is investigated more as a fractionation method. A well-known application in the dairy industry is concentration and partial salt removal from whey. Concentration and partial demineralization is beneficial for futher processing of whey as whey concentrates are used e.g. in baby foods. In the experiments of this study nanotiltration effectively reduced the monovalent salts in the whey concentrate. The main concern in this application is lactose leakage into the permeate. With the nanofiltration membranes used the lactose retentions were practically ? 99%. Another dairy application studied was the purification and reuse of cleaning solutions. This is an environmentally driven application. An 80% COD reduction by nanofiltration was observed for alkaline cleaning-in-place solution. Nanofiltration is not as commonly applied in the sugar and sweeteners industry as in the dairy industry. In this study one potential application was investigated, namely xylose purification from hemicellulose hydrolyzate. Xylose is raw material for xylitol production. Xylose separation from glucose was initially studied with xylose-glucose model solutions. The ability of nanofiltration to partially separate xylose into the permeate from rather concentrated xylose-glucose solutions (10 w-% and 30 w-%) became evident. The difference in size between xylose and glucose molecules according to any size measure is small, e.g. the Stokes diameter of glucose is 0.73 nm compared to 0.65 nm for xylose. In further experiments, xylose was purified into nanoliltration permeate from a hemicellulose hydrolyzate solution. The xylose content in the total solids was increased by 1.4—1.7 fold depending on temperature, pressure and feed composition.

Evaluation of acid digestion techniques to estimate chromium contents in cattle feces

The objective of this work was to evaluate the accuracy of digestion techniques using nitric and perchloric acid at the ratios of 2:1, 3:1, and 4:1 v v-1, in one- or two-step digestion, to estimate chromium contents in cattle feces, using sodium molybdate as a catalyst. Fecal standards containing known chromium contents (0, 2, 4, 6, 8, and 10 g kg-1) were produced from feces of five animals. The chromium content in cattle feces is accurately estimated using digestion techniques based on nitric and perchloric acids, at a 3:1 v v-1 ratio, in one-step digestion, with sodium molybdate as a catalyst.

Evolving techniques to evaluate ejaculatory function.

PURPOSE OF REVIEW: Recent findings in the physiology and neurobiology of ejaculation have expanded our understanding of male sexual function and have allowed the development of new instruments to investigate ejaculatory and orgasmic disorders. RECENT FINDINGS: The evidence-based definition of lifelong premature ejaculation has set a model in the evaluation and treatment outcome of sexual dysfunction. New instruments to objectively assess arousal, orgasm and the expulsion phase of ejaculation such as functional MRI, dynamic pelvic ultrasound, PET scans and validated questionnaires have lead to a better understanding of sexual dysfunction in men. Animal models, developments in neurobiology and clinical experience have transformed a purely psychoanalytical approach to ejaculatory and orgasmic function into a novel multidisciplinary, scientifically sound and evidence-based discipline of medicine. SUMMARY: Ejaculation is an integral part of normal sexual function. Ejaculatory dysfunction is common and may cause substantial disruption to the quality of a patient's life. A better understanding of the epidemiology, pathophysiology, neuroscience and genetics of ejaculatory and orgasmic function will eventually lead to the development of new, effective methods of treatment of disorders of ejaculation and orgasm in men.

Actinobaculum schaalii: clinical observation of 20 cases.

Actinobaculum schaalii is a new species that has so far been isolated from human blood, urine and pus. Its importance has probably been underestimated and other Actinobaculum spp. may also have been underdiagnosed. This retrospective study comprises all known cases of A. schaalii infections identified since 2004 in the canton of Neuchâtel (170,000 inhabitants), Switzerland. Strains were cultivated and isolated in the bacteriology laboratory using its routine procedure. Identification included a Rapid ID 32 A strip (bioMérieux) and 16S rRNA gene sequencing. Twenty-one positive samples were found in 19 patients (11 male, 8 female) of all ages (range 16-91 years): 10 from urine (50%), six from blood (30%), one from both blood and urine (5%), and three from pus (15%). Thirteen out of 17 (76%) cases with either blood or urine specimens had underlying genitourinary tract pathologies. When urine cultures were positive for A. schaalii, leucocytes were found in all samples (10/10, 100%) but all nitrite tests were negative (10/10, 100%). The onset of appropriate treatment was delayed due to the diminished sensitivity of A. schaalii to the antibiotics commonly used for UTIs (i.e. ciprofloxacin and trimethoprim/sulfamethoxazole) and to the delay in microbiological diagnosis. A. schaalii should specifically be searched in all cases of leukocyturia with a negative nitrite test but with Gram-positive rods in the Gram stain, in patients with underlying genitourinary tract pathology, instead of dismissing these findings as clinically irrelevant colonization by coryneform bacteria. This infection may be much more common than previously thought.

The Application of 3D Reconstruction Techniques in the Analysis of Ancient Tarraco’s Urban Topography

The widespread implementation of GIS-based 3D topographical models has been a great aid in the development and testing of archaeological hypotheses. In this paper, a topographical reconstruction of the ancient city of Tarraco, the Roman capital of the Tarraconensis province, is presented. This model is based on topographical data obtained through archaeological excavations, old photographic documentation, georeferenced archive maps depicting the pre-modern city topography, modern detailed topographical maps and differential GPS measurements. The addition of the Roman urban architectural features to the model offers the possibility to test hypotheses concerning the ideological background manifested in the city shape. This is accomplished mainly through the use of 3D views from the main city accesses. These techniques ultimately demonstrate the ‘theatre-shaped’ layout of the city (to quote Vitrubius) as well as its southwest oriented architecture, whose monumental character was conceived to present a striking aspect to visitors, particularly those arriving from the sea.