Single Particle and Packed Bed Combustion in Modern Gasifier Stoves—Density Effects

This article is concerned with a study of an unusual effect due to density of biomass pellets in modern stoves based on close-coupled gasification-combustion process. The two processes, namely, flaming with volatiles and glowing of the char show different effects. The mass flux of the fuel bears a constant ratio with the air flow rate of gasification during the flaming process and is independent of particle density; char glowing process shows a distinct effect of density. The bed temperatures also have similar features: during flaming, they are identical, but distinct in the char burn (gasification) regime. For the cases, wood char and pellet char, the densities are 350, 990 kg/m(3), and the burn rates are 2.5 and 3.5 g/min with the bed temperatures being 1380 and 1502 K, respectively. A number of experiments on practical stoves showed wood char combustion rates of 2.5 +/- 0.5 g/min and pellet char burn rates of 3.5 +/- 0.5 g/min. In pursuit of the resolution of the differences, experimental data on single particle combustion for forced convection and ambient temperatures effects have been obtained. Single particle char combustion rate with air show a near-d(2) law and surface and core temperatures are identical for both wood and pellet char. A model based on diffusion controlled heat release-radiation-convection balance is set up. Explanation of the observed results needs to include the ash build-up over the char. This model is then used to explain observed behavior in the packed bed; the different packing densities of the biomass chars leading to different heat release rates per unit bed volume are deduced as the cause of the differences in burn rate and bed temperatures.

Gibbs free energies of formation of ZnAl2O4 and ZnCr2O4

The standard free energies of formation of zinc aluminate and chromite were determined by measuring the oxygen potential over a solid CuZn alloy, containing 10 at.−% Zn, in equilibrium with ZnO, ZnAl2O4+Al2O3(χ) and ZnCr2O4+Cr2O3, in the temperature range 700–900°C. The oxygen potential was monitored by means of a solid oxide galvanic cell in which a Y2O3 ThO2 pellet was sandwiched between a CaOZrO2 crucible and tube. The temperature dependence of the free energies of formation of the interoxidic compounds can be represented by the equations, The heat of formation of the spinels calculated from the measurements by the “Second Law method” is found to be in good agreement with calorimetrically determined values. Using an empirical correlation for the entropy of formation of cubic spinel phases from oxides with rock-salt and corundum structures and the measured high temperature cation distribution in ZnAl2O4, the entropy of transformation of ZnO from wurtzite to rock-salt structure is evaluated.

Performance evaluation of nonthermal plasma reactors for NO oxidation in diesel engine exhaust gas treatment

The discharge plasma-chemical hybrid process for NO/sub x/ removal from the due gas emissions is an extremely effective and economical approach in comparison with the conventional selective catalytic reduction system. In this paper we bring out a relative comparison of several discharge plasma reactors from the point of NO removal efficiency. The reactors were either energized by AC or by repetitive pulses. Ferroelectric pellets were used to study the effect of pellet assisted discharges on gas cleaning. Diesel engine exhaust, at different loads, is used to approximately simulate the due gas composition. Investigations were carried out at room temperature with respect to the variation of reaction products against the discharge power. Main emphasis is laid on the oxidation of NO to NO/sub 2/, without reducing NOx concentration (i.e., minimum reaction byproducts), with least power consumption. The produced NO/sub 2/ will be totally converted to N/sub 2/ and Na/sub 2/SO/sub 4/ using Na/sub 2/SO/sub 3/. The AC packed bed reactor and pelletless pulsed corona reactor showed better performance, with minimum reaction products for a given power, when the NO concentration was low (/spl sim/100 ppm). At high engine loads (NO>300 ppm) there was not much decrease in NO/sub x/ reduction and more or less all the reactors performed equally. The paper discusses these observations in detail.

A core study on NOX removal in diesel exhaust by pulsed/ac/dc electric discharge plasma

In this paper a study on effect of different energization on removal of NOX in diesel engine exhaust has been presented. Here we made a detailed qualitative study of effect of pulsed/ac/dc voltage energizations on the NOX treatment of using conventional wire-cylinder reactor configuration. It was observed that amongst different energizations, pulse energization exhibits maximum NOX removal efficiency when compared to ac and dc energizations. For a given specific energy density, wire-cylinder reactor filled with BaTiO3 pellet gives higher NOX removal efficiency when compared to reactor without pellets under both pulse and ac energization. The dc energization does not have much impact on the removal processes. The paper further discusses the individual energization cases in detail.

Evaluating methane storage targets: from powder samples to onboard storage systems

The development of a viable adsorbed natural gas onboard fuel system involves synthesizing materials that meet specific storage target requirements. We assess the impact on natural gas storage due to intermediate processes involved in taking a laboratory powder sample to an onboard packed or adsorbent bed module. We illustrate that reporting the V/V (volume of gas/volume of container) capacities based on powder adsorption data without accounting for losses due to pelletization and bed porosity, grossly overestimates the working storage capacity for a given material. Using data typically found for adsorbent materials that are carbon and MOF based materials, we show that in order to meet the Department of Energy targets of 180 V/V (equivalent STP) loading at 3.5 MPa and 298 K at the onboard packed bed level, the volumetric capacity of the pelletized sample should be at least 245 V/V and the corresponding gravimetric loading varies from 0.175 to 0.38 kg/kg for pellet densities ranging from 461.5 to 1,000 . With recent revision of the DOE target to 263 V/V at the onboard packed bed level, the volumetric loadings for the pelletized sample should be about 373 V/V.

Efecto de tres presentaciones de pienso sobre la productividad en conejos de engorde

El presente trabajo experimental se realizó, con el objetivo de estudiar el efecto de presentación del alimento, sobre los rendimientos productivos en conejos de engorde. Se aplica con tres tratamientos. A los animales del grupo control (Tl) se les suministró un pienso comercial en forma de harina. En el segundo tratamiento (T2) se suministró el mismo pienso en forma de amasijo (76% harina y 24% agua) y en el tercer tratamiento (T3) los animales consumieron el mismo pienso comercial pero en forma de gránulos o pellet. Se utilizaron 45 gazapos (de ambos sexos), de 42 días de edad de la raza Neozelandés blanco (NZB), con un peso vivo inicial promedio de 0.877 Kg. y se llevaron a los 77 días de edad con un promedio final de 1.849 Kg. de peso vivo. Para la evaluación estadística se empleó un diseño completamente aleatorio (DCA) con tres tratamientos y cinco repeticiones por tratamiento. Cada unidad experimental (jaulas de 0.40 mt2) estaba constituida por tres gazapos distribuidos aleatoriamente a los que se les registraron diariamente el consumo de alimento y semanalmente el aumento de peso vivo. Los parámetros (ANDEVA) fueron la promedio de alimento cada tratamiento. analizados estadísticamente por medio de ganancia media diaria (Kg/día), el consumo (Kg. MS/día) y el índice de conversión por todas las variables estudiadas se vieron afectadas por la forma de presentación del pienso y se registraron diferencias significativas entre los tratamientos, resultando que la ganancia media diaria (kg./día), fue similar en los tratamientos T1 y T2, pienso en forma de harina y pienso en forma de amasijo; pero si hubo diferencias significativas (P < 0.01) en relación al tratamiento T3, pienso en forma de gránulo (I, 0.02525; II, 0.02406 y III, 0.03395) respectivamente. Nuestros resultados demuestran que el consumo de pienso (kg. MS/día) difiere significativamente (P < 0.01) con un mayor consumo de pienso granulado (I, 0.06333; II, 0.07478 y III, 0.08854) respectivamente. A través del procedimiento de separación de medias (D.M.S.) se encontró que los índices de conversión para los alimentos en forma de harina y gránulo o pellet fueron similares, pero fue mayor el valor presentado por el amasijo (I, 2,51; II, 3.10 y III, 2.60) respectivamente. Durante el ensayo los animales del tratamiento tres (pienso granulado) fueron los primeros en alcanzar el peso comercial (2,072 kg.) a los 35 días del engorde, en tanto en los tratamientos I y II los pesos finales registrados fueron 1,753 y 1.721 kg de peso vivo respectivamente. Luego de analizados los resultados obtenidos se pudo detectar diferencias significativas debido a un mayor consumo y crecimiento en los animales que consumieron pienso granulado.

Efecto de tres niveles de proteína sobre los rendimientos productivos en conejos de engorde

El presente trabajo experimental se realizó con el objetivo de estudiar el efecto de la variación proteica sobre los rendimientos productivos en conejos de engorde y la evaluación económica de los Tratamientos. Se utilizarán 27 gazapos de 40 días de edad, de la raza Neozelandés Blanco (NB), con un peso vivo inicial promedio de 0.612 Kg. Se realizó sexaje de los animales resultando 12 hembras y 15 machos. Se utilizaron tres tratamientos. A los animales del grupo uno (T1) se les suministró pellet con 13% PB. En el segundo grupo (T2) o testigo se suministró pellet con 15% PB y el tercer tratamiento se suministró pellet con 17% PB. Para las evaluaciones estadísticas se empleó un diseño completamente aleatorio (DCA), con tres tratamientos y tres repeticiones por tratamiento. Cada repetición estaba constituida por tres gazapos distribuidos aleatoriamente a los que se le registraron diariamente consumo de alimento y semanalmente aumento de peso vivo, ganancia media diaria e índice de conversión alimenticia. Las variables analizadas estadísticamente por medio del análisis de varianza (ANDEVA) fueron la Consumo Promedio de Alimento (Kg/día), Ganancia Media Diaria (Gr/día) y el índice de conversión por cada tratamiento, Duración del período de Ceba y los Costos Totales por Tratamiento. Para las variables dependientes se obtuvieron los siguientes valores : %P T1. 13%; T2. 15%; T3. 17% CA(Kg) T1: 0.0757 %; T2: 0.0785; T3: 0.0945 GMD (Gr/Dia) T1: 18.874; T2:17.990; T3: 17.902 ICA (Kg A/Kg PV)T1: 4.01; T2: 4.36; T3: 5.28 lnc. Peso (Kg) T1: 1.189; T2: 1.134; T3: 1.128 Durante el ensayo los animales del tratamiento T1 (13 16 PB) fueron los primeros en alcanzar el peso comercial (1.872 Kg) a los 63 días del engorde. En tanto en los tratamientos T2 (15 % PB) y T3 (17 % PB) los pesos finales registrados fueron 1.850 y 1.833 Kg de PV respectivamente. En el ANDEVA realizado para las diferentes variables, se observó que el efecto de los tratamientos sobre Consumo alimenticio, Ganancia Media Diaria e índice de Conversión Alimenticia resultó no significativo concluyendo que no existe diferencia entre los tratamientos. Sin embargo el Tratamiento con13% de PB (T1) fue el que presentó menor consumo, mayor ganancia de peso y mejor conversión Con la realización del análisis de los costos totales para un gazapo en engorde se determinaron valores de $20.01(T1),20.45 (T2) y 21.55 (T3). Al determinar los costos de alimentación por tratamiento se obtuvieron valores de C$ 27.91 para el13% de PB (T1), C$ 30.86 para el15% de PB (T2) y C$ 43.53 para el 17% de PB (T3). Pudiendo concluir que el tratamiento con 13% de PB (T1) fue el que presentó menores costos de alimentación y por lo tanto se obtuvo mayor utilidad.

Heating, current drive and confinement regimes with the JET ICRH and lhcd systems

During its 1990 operation, 2 large RF systems were available on JET. The Ion Cyclotron Resonance Heating (ICRH) system was equipped with new beryllium screens and with feedback matching systems. Specific impurities generated by ICRH were reduced to negligible levels even in the most stringent H-mode conditions. A maximum power of 22 MW was coupled to L-mode plasmas. High quality H-modes (tau-E greater-than-or-equal-to 2.5 tau-EG) were achieved using dipole phasing. A new high confinement mode was discovered. It combines the properties of the H-mode regime to the low central diffusivities obtained by pellet injection. A value of n(d) tau-E T(i) = 7.8 x 10(20) m-3 s keV was obtained in this mode with T(e) approximately T(i) approximately 11 keV. In the L-mode regime, a regime, a record (140 kW) D-He-3 fusion power was generated with 10 - 14 MW of ICRH at the He-3 cyclotron frequency. Experiments were performed with the prototype launcher of the Lower Hybrid Current Drive (LHCD) systems with coupled power up to 1.6 MW with current drive efficiencies up to < n(e) > R I(CD)/P = 0.4 x 10(20) m-2 A/W. Fast electrons are driven by LHCD to tail temperatures of 100 keV with a hollow radial profile. Paradoxically, LHCD induces central heating particularly in combination with ICRH. Finally we present the first observations of the synergistic acceleration of fast electrons by Transit Time Magnetic Pumping (TTMP) (from ICRH) and Electron Landau Damping (ELD) (from LHCD). The synergism generates TTMP current drive even without phasing the ICRH antennae.

Efficacy and Residue Comparisons between Two Slow-release Formulations of Fluridone

Residue profiles and efficacy of Avast and Sonar, two slow release pellet formulations of fluridone {1-methyl-3-phenyl-5- [3-(trifluoromethyl)phenly]-4(1H)-pyridinone}, were compared in outdoor tanks. Hydrilla (Hydrilla verticillata (L.f.) Royle) and southern naiad (Najas guadalupensis (Sprengel) Magnus) were treated with a split application of 6, 12, 18 and 24 μg/l a.i. fluridone and the concentrations of both formulations compared over a 134-day period. Both pellet formulations exhibited very similar residues over time for each respective treatment, resulted in peak concentrations of fluridone 40 to 50 days after application, and effectively and similarly controlled southern naiad and hydrilla at all rates tested by 92 days after initial application. (PDF contains 3 pages.)

Histoire philosophique et politique : des établissemens et du commerce des européens dans les deux Indes

Guillaume Raynal, historiador e filósofo francês, nasceu em Saint-Geniez-en Rouergue em 11 de abril de 1713 e morreu em Choillot, em 6 de março de 1796. Estudou no Colégio dos Jesuítas de Pézenas, distinguindo-se como pregador e professor. Abandonou o hábito jesuita para se dedicar à filosofia e à história, publicando numerosos artigos no Mercure de France. Tendo sido alvo de um mandado de prisão, refugiou-se na Prússia e mais tarde na Rússia; retornou à França em 1787. ‘Histoire philosofique et politique’ foi publicada simultaneamente pelo mesmo editor em duas impressões, contendo cinco volumes a primeira e dez volumes a segunda. Foi uma das obras que mais ínfluenciou o movimento da Revolução Francesa, tendo o autor utilizado opiniões e, eventualmente, a colaboração de Diderot e Holbach, entre outros contemporâneos. Proibido na França e ai queimado em 1781, este importante trabalho de Raynal teve mais de trinta edições num periodo de vinte anos e foi traduzido para quase todos os idiomas europeus. Segundo Borba de Moraes, ‘esta edição de Genebra é a melhor e mais bela’. Na impressão de dez volumes existentes na Biblioteca da Câmara, a seção referente ao Brasil encontra-se no volume 5.

The use of locally available materials in fish feed production

In Nigeria, the culture of fish is gaining importance, but local fish farmers face a set back because of the stoppage on importation of fish feed. Locally available raw materials such as yam, plantain, banana, cowpeas, macuna, maize, cassava, millet, sorghum, groundnut, sunnhemp seed and brewery wastes are considered as potential materials for fish feed. These have been examined on their minimum protein contributions since this is the most expensive part of the fish feed. Alternative sources to animal proteins are also examined. Plant protein from groundnut, melon, mucuna and others compare favourably with bloodmeal mixture and thus can be used to replace the more expensive animal proteins. Pellet feed can be produced on a small scale or commercial basis from the locally available raw materials and the fish farmer is advised to seek assistance from qualified fisheries personnel

Guía de diseño de un edificio de bajo consumo energético

[ES]Comparativa de las alternativas disponibles para la construcción de un edificio, con el objetivo de optimizar el diseño disminuyendo las pérdidas de energía. De los distintos tipos de construcciones posibles, la investigación se centra en una vivienda unifamiliar. El trabajo aborda, por una parte, el diseño de la envolvente de la vivienda con las técnicas eficientes y los materiales mejor ajustados a la zona de edificación; y por otra, la selección del sistema de calefacción y de agua caliente sanitaria (ACS). Se opta por bloques de tierra comprimida, aislante de celulosa y enlucido de arcilla para las paredes, así como por una caldera de pellets para el sistema de calefacción y una instalación de energía solar térmica para el ACS.

The energy spectra of uranium atoms sputtered from uranium metal and uranium dioxide targets

The energy spectra of ²³⁵U atoms sputtered from a 93% enriched ²³⁵U metal foil and a hot pressed ²³⁵U0₂ pellet by an 80 keV ⁴⁰Ar⁺ beam have been measured in the range 1 eV to 1 keV. The measurements were made using a mechanical time-of-flight spectrometer in conjunction with the fission track technique for detecting ²³⁵U. The design and construction of this spectrometer are discussed in detail, and its operation is mathematically analyzed.

The results of the experiment are discussed in the context of the random collision cascade model of sputtering. The spectrum obtained by the sputtering of the ²³⁵U metal target was found to be well described by the functional form E(E+E_b)^-2.77, where E_b = 5.4 eV. The ²³⁵U0₂ target produced a spectrum that peaked at a lower energy (~ 2 eV) and decreased somewhat more rapidly for E ≳ 100 eV.

Mitochondria and the development of sea urchin embryos

After artificial activation or fertilization of non-nucleate fragments or eggs of the sea urchin, the mitochondria actively synthesize RNA. The RNA made in non-nucleate fragments is shown to be mostly single stranded and to be associated primarily with the low speed pellet of centrifuged cellular homogenates.

Protein synthesis is observed in non-nucleate fragments in the presence or absence of the mitochondrial RNA synthesis: it is found to be qualitatively similar but quantitatively less in the absence of the RNA synthesis. The continued syntheses of proteins in the non-nucleate fragments in the absence of mitochondrial RNA synthesis provides additional evidence for the presence of a stable messenger RNA component in the unfertilized sea urchin egg.

Since the uptake or actinomycin D was found to be inhibited by the presence of a fertilization membrane, ethidium bromide, at 10 μgs/ml, is used as an effective inhibitor of RNA synthesis in non-nucleate fragments and in early cleavage stage embryos. However, this same concentration of ethidium bromide is found to be only partially effective in blocking RNA synthesis at the mesenchyme blastula stage of development.

Low concentrations of ethidium bromide (2 and 5 μgs/ml) are found not to be lethal but to be capable of producing moderate developmental defects. In the presence of concentrations of ethidium bromide adequate to inhibit all the mitochondrial RNA synthesis (10 μgs/ml of ethidium bromide), from fertilization on, the embryos do not cleave beyond the 4-8 cell stages. When similar concentrations of ethidium bromide are added at an early mesenchyme blastula stage, the embryos do not gastrulate but continue to swim for more than 24 additional hours (adequate for control embryos to develop to a late prism stage). These results lead to the conclusion that mitochondrial RNA synthesis may be very essential for normal development to occur.

DNA is synthesized in the non-nucleate fragments of sea urchin eggs. None of the newly synthesized DNA is found in the closed circular form. When phenol extracted directly from the fragments, the DNA is found to sediment at approximately 38 and 27s in sucrose gradients but neither of these size classes could be found associated with the isolated mitochondria. The template for the synthesis of DNA in non-nucleate fragments remains unknown.

Polyculture du machoiron Chrysichthys nigrodigitatus avec Oreochromis niloticus en etang

Fingerling catfish Chrysichthys nigrodigitatus (P=4.0 g, FL=65.3 mm) and Oreochromis niloticus (P=11.2 g, TL=84.8 mm) were stocked in 0.06 ha earthen ponds at Pass (Annex of the Aquaculture Research Station at Layo, Côte d'Ivoire). The ponds were stocked at densities of 6700 catfish per ha, and 6700 catfish with 3350 tilapias per ha. The study lasted from February to August 1985 and the fish were fed daily at 6% of the estimated catfish biomass with 32% protein pellet. There were no differences in mean weekly water temperature (p > 0.05). The dissolved oxygen concentration was higher in ponds where tilapias were added (p < 0.05) The presence of tilapias seems to have improved water quality and did not affect growth and production of catfish (p > 0.05). Their presence also significantly increased total fish yield (p < 0.05) by 23.5%. There were no significant differences (p > 0.05) in catfish survival between the two production systems.