Programa Nacional de Incentivo à Leitura - PROLER: avaliação da implementação pelo Comitê Potiguar

The National Reading Incentive Program (PROLER) is a national initiative to promote and encourage reading throughout the country, linked to the National Library Foundation (FBN) of the Ministry of Culture (MinC). This research aims to assess the PROLER’s implementation process in the state of Rio Grande do Norte, from the actions of their local committee. The framework is based on contextualize the policies that seek to encourage the book and reading, as well as the processes of implementation and evaluation of public policies. The research is understood as a qualitative descriptive-exploratory study, comprising a single case study. Makes use of semi-structured interview as a tool for data collection, which was attended by 8 members of Potiguar Committee as respondents. The techniques of bibliographical and documentary analysis were used for the analysis and discussion of data obtained from surveys and documents on PROLER; as to the content of the interviews, the technique used was the analysis of conversations. As for the results, the existence of four barriers to program implementation in the state that are worth mentioning is observed: a) the political-administrative discontinuity; b) the limited resources and few partnerships; c) the management of school libraries and absence from the post of librarian in the state and; d) the absence of a process or assessment tool able to evaluate the results or the impacts of actions taken by the Potiguar Committee. It was noticed that these limiting four come PROLER making the implementation of the Rio Grande do Norte a process that, although complying with the national regulations of teacher training and follow school libraries and their needs, not flawed to develop assessments that can measure program impacts, making the feedback process of ineffective policy. Another observation of this study is seen in the fact that the Committee did not get enough to supply their shares resources, as well as not being able to articulate new partnerships, thus contributing negatively to the scope of the program form and, consequently, for the effectiveness of their actions. Has even mentioning the fact that the Committee do nothing regarding the mismanagement of the libraries that are in their care, ie, do not use the power of coercion as guaranteed by the National Policy on Reading and federal laws that treat the school library, and is therefore ineffective in relation to compliance with the program guidelines

Qualidade do solo da camada de cobertura final em área de disposição de resíduos no semiárido tropical

The final disposal of municipal solid waste in unsuitable areas without an infrastructure that meets the health measures and environmental protection, coupled with the lack of technical criteria in phase and decommissioning of the dump can promote environmental degradation. Alternatively to minimize the impacts of this activity for the stabilization of the area by isolating the massive waste with implementation of an adequate and finished by a layer of soil for plant growth final cover system. In this context, the present study aimed to evaluate the quality of the final cover in the area of a disabled dump the tropical semi-arid region in order to assist the process of recovery of these areas. The study area is located in the tropical semi-arid region in São João do Sabugi /RN. Soil samples were collected in the dump area and bushland as a benchmark of quality. To which they were subjected to analysis of physical attributes (particle density, bulk density, grain size and porosity), chemical properties (pH, K + , Na+ , Ca2 + , Mg2 + and Al3 + exchangeable, potential acidity, available phosphorus, sum of bases, CEC, base saturation, aluminum saturation, saturation Na + and adsorption ratio sodium, total organic carbon and total nitrogen) and total and soluble concentrations of heavy metals (Mn, Pb, Zn, Cd, Cu, Mo, Co, Cr, Ba and Ni). The differences between physical and chemical soil under native forest and final cover showing reduction of soil quality in the area off to the dump, which hinders the development of native vegetation and the recovery of the area. The absence of superior waterproofing to allow vertical transfer between the solid waste and the final cover promoted enrichment by chemical elements and heavy metals in excess can impair revegetation. Deficiencies found in the construction process of the final cover point to the need for intervention to accelerate the process of stabilization and recovery of the area of the local ecosystem

Estudo da incorporação de resíduos de perfuração para aplicação em cimentação de poços de petróleo

During the drilling of oil and natural gas are generated solid waste, liquid and gaseous. These solid fragments, which are known as cuttings, are carried to the surface through the drilling fluid. Furthermore, this fluid serves to cool the bit, keeping the internal pressure of the well, and others. This solid residue is very polluting, because it has incorporated beyond the drilling fluid, which has several chemical additives harmful to the environment, some heavy metals that are harmful to the environment, such as lead. To minimize the residue generated, are currently being studied numerous techniques to mitigate the problems that such waste can cause to the environment, like addition of cuttings in the composition of soil cement brick masonry construction, addition of cuttings on the clay matrix for the manufacture of solid masonry bricks and ceramic blocks and coprocessing of the cuttings in cement. So, the main objective of this work is the incorporation of cuttings drilling of oil wells, the cement slurry used in the cementing operation of the well. This cuttings used in this study, arising from the formation Pendências, was milled and separated in a sieve of 100 mesh. After grinding had a mean particle sike in order of 86 mm and crystal structure containing phases of quartz and calcite type, characteristic of the Portland cement. Were formulated and prepared slurries of cement with density 13 lb / gal, containing different concentrations of gravel, and realized characterization tests API SPEC 10A and RP 10B. Free water tests showed values lower than 5.9% and the rheological model that best described the behavior of the mixtures was the power. The results of compressive strength (10.3 MPa) and stability (Dr <0.5 lb / gal) had values within the set of operational procedures. Thus, the gravel from the drilling operation, may be used as binders in addition to Portland cement oil wells, in order to reuse this waste and reduce the cost of the cement paste.

A reforma psiquiátrica e a política de saúde mental do Rio Grande do Norte: papéis e funções de profissionais e gestores

This study arose from an interest in knowing the reality of mental health care in Rio Grande do Norte (RN) on the advances and challenges in the intersectoral agreements paths and consolidation of the Psychosocial Care Network (RAPS) from the state. Considering problematic and concerns were defined as objectives: Identify the knowledge of managers of Rio Grande do Norte on the National Mental Health Policy (PNSM) in the RN State; Describe the activities developed by health professionals in the individual service offered in the CAPS from RN; Understanding the relationship of managers’ knowledge on national mental health policy in professionals’ practice working in the the CAPS from the countryside. It is a descriptive study with a quantitative and qualitative approach, carried out in 30 CAPS from RN’s countryside, where 183 professionals answered a structured questionnaire with closed questions about the activities they do in individual care; and 19 mental health coordinators of municipalities and the state coordinator of RAPS were interviewed about their knowledge on the Mental Health Policy. Data were collected after approval by the Research Ethics Committee of the Federal University of Rio Grande do Norte, with the number 508.430 CAAE: 25851913.7.0000.5537 from August through October of 2014 in 26 municipalities with CAPS from the state. Quantitative data were tabulated and analyzed using a descriptive statistics aided by the software Statistical Package for the Social Scienses (SPSS) version 20.0. The qualitative data were prepared in a corpus and analyzed through software Analyse Lexicale par Contexte d’um Ensemble de Segments de Texte (ALCESTE) that allow to perform textual statistical analysis and categorization from their comments, submitted to Bardin content analysis. Five categories were generated approaching the managers’ knowledge, namely: Back to society: leadership and users’ role and autonomy; The gap between policy and practice; Barriers that affect the service; Structuring the Psychosocial Care Network; Multidisciplinary team: attribuitios and activities. The CAPS professionals’ ages ranged from 20 to 58 years, prevailing females, with 76.5% of the total, the majority were social workers (16.8%), psychologists (15.3%), nurses (14.8%) and nursing technicians (14.8%). The results showed precariousness in care associated with physical workload regard to high workload and low wages of the CAPS professionals' and, also, it was possible to observe a large involvement of professionals in care delivery, despite the difficulties encountered in services. It was found little knowledge in managers regarding the National Mental Health Policy having as causes of this reality the poor education and training of these professionals. The responses of professionals working in care reveals strong consistency with what is expected of a psychosocial care service. Points up as a thesis of this study that the psychiatric reform and mental health policy in Rio Grande do Norte is following a structural expansion process, but with precariousness of services from a still unprepared management to act in a psychosocial context.

Tratamento de cascalho de perfuração utilizando sistemas microemulsionados

The oil industry is one of the activities that generates more waste to the environment. The drill cuttings is a waste generated in large quantities in the drilling process and that may cause environmental damage such as soil contamination and consequently the contamination of groundwater if disposed of without prior treatment. Arises the need to develop scientific activities and research ways to adapt these wastes the current environmental standards. In the case of solid wastes, the NBR 10004: 2004 of the Brazilian Association of Technical Standards (ABNT) classifies them into class I waste (hazardous) and class II (not dangerous), which determines which wastes may or may not be discarded in the environment without causing environmental impact. This study presents a novel alternative for treating drill cuttings, where this waste was classified as class I (Abreu & Souza, 2005), mainly by removing the n-paraffin present in it, since this arises when using drilling fluids base oil. Using microemulsion systems promotes the removal of this contaminant drill cuttings samples from wells located in Alto do Rodrigues - RN. Initially, we determined the concentration of paraffin using infrared method in samples were extracted with ultrasound, we obtained a paraffin concentration in the range from 36.59 to 43.52 g of paraffin per kilogram of cuttings. Used two microemulsion systems containing two nonionic surfactants from different classes, one is an alcohol ethoxylated (UNTL-90) and the other an nonylphenol ethoxylated (RNX 110). The results indicated that the system UNTL-90 surfactant has better efficiency than the system with RNX 110. The study of the influence of contact time at the extraction showed that for times greater than 25 minutes has a tendency to increase the percentage extraction with increasing contact time. It was also observed that the extraction is fast because at 1 minute contact has 22.7% extraction. The reuse of the microemulsion system without removing the paraffin extracted in previous steps, showed reduction of 29.32 in percentage of extraction by comparing the first and third extraction, but by comparing the first and second extractions reduction is 8.5 in percentage extraction, so the systems reuse optimization can be an option for economically viable removing paraffin from cuttings. The extraction with shaking is more effective in the treatment of cuttings, reaching the extraction percentage of 87.04%, that is, obtaining a drill cuttings with 0.551% paraffin. Using the percentage of paraffin employed in non-aqueous drilling fluids and fluid maximum limit on cuttings for disposal established by the Environmental Protection Agency of the United States (US EPA), one arrives at the conclusion that the level of paraffin on gravel cannot exceed 3.93%. Conclude that the amount of paraffin in the treated cuttings with the microemulsion system with shaking is below the established by US EPA, showing that the system used was efficient in removing the paraffin from the drill cuttings.

Caracterização e separação física de placas de circuito impresso de computadores obsoletos

The unbridled consumption of electronic equipment associated with fast immersion of new technologies on the market leads to the accelerated growth of electronic waste. Such waste mostly contains printed circuit boards in its structure. Printed circuit boards have many metals, including heavy metals, being highly toxic. Electronic waste is discarded improperly and indiscriminately, usually without any previous treatment and with other municipal waste, contaminating the environment and causing serious problems to human health. Beyond these metals, there are also precious metals and high value-added basis, that can be recovered and recycled, reducing the exploration of natural resources. Thus, due to the high growth potential and reuse of these waste treatment processes, characterization and separation were applied to the printed circuit boards. The printed circuit boards were subjected to physical treatments such as dismantling, crushing, sizing separation, magnetic separation and chemical treatments such as pyrolysis and leaching. Through characterization process (pyrolysis and leaching) the proportions of the components of the granulometric range were determined: 46,08% of metals; 23,32% of polymers and 30,60% of ceramics. It was also observed by particle size separation that metal components tend to concentrate in coarse fractions, while polymeric and ceramic components in fine fractions. From the magnetic separation process was obtained 12,08% of magnetic material and 82,33% of non-magnetic material.

Estudo do aproveitamento de resíduos PAE no desenvolvimento de materiais cerâmicos

This work presents a new ceramic material obtained through the incorporation of solid waste from the steel industry and known as dedusting powder PAE - in ceramic formulations based on clay, potassium and sodium feldspars, kaolin and talc. Formulations were prepared with ceramic residue levels of 0% (basic mass - MB), 2%, 4% and 8%, subjected to firing at temperatures of 1000 ° C, 1050ºC, 1100ºC and 1150ºC for periods of 15 min. and 120 min. The physicchemical and mechanical properties of these ceramic formulations were determined based on the firing temperature, residence time in the oven and the percentage of waste. Since the physicochemical and mechanical properties of the sintered materials were evaluated by chemical analysis techniques (fluorescence X-rays - FRX), particle size distribution, specific surface area, apparent density, structural analysis by diffraction of X-rays (DRX) and characterization of surface by scanning electron microscopy (SEM). The magnetic response characteristics and the pattern of magnetic ferrites of the samples were analyzed in the assay conditions, having noticed that the saturation magnetic susceptibility depend on the sintering temperature of the material and it is associated with its crystal structure. From the analysis results, it was concluded that the ceramic material with better physical and mechanical properties is obtained when the 8% from PAE residue is added to standard formulation under the burn time of 15 minutes and temperature of 1150ºC.

Análise de microestrutura e de características geotécnicas de misturas de resíduo de polimento de porcelanato e solo

Brazil is a country in development, rich in natural resources. In order to grow sustainably, it is necessary to Brazil to preserve its environment, which is an expressive challenge, especially to industries, such as those producing ceramic materials. This study was developed using Porcelain Tile Polishing Residue (RPP) in blends with soil to build compacted fills. This residue is a slurry generated during the polishing process of porcelain tiles and contains powdery material from the polished tile, the abrasives used during the process and cooling water. The RPP was collected from a private company located in Conde/PB and it was mixed with a sandy-clayey soil, to build the fills. Laboratorial tests were conducted with pure soil, pure RPP and blends in proportions of 5%, 10%, 15% and 20% of RPP in addition to the dry mass of pure soil. The Chemical and Physical Characterization tests performed were: specific solid weight, grain size distribution, laser analysis of grain size distribution, Atterberg limits, X ray fluorescence, X ray diffraction, scanning electron microscopy and soil compaction,. The materials and blends were also compacted and direct shear tests and plate load tests were performed. Plate load tests were conducted using a circular plate with 30 cm diameter, on specimens of pure soil and 5% blend, compacted in a metallic box inside the Soil Mechanics Laboratory of the Federal University of Rio Grande do Norte, Brazil. Both mechanical tests performed were conducted under inundated conditions, willing to reduce the influence of soil suction. An evaluation of the results of the tests performed shows that RPP is a fine material, with grain size distribution smaller than 0,015mm, composed mainly of silica and alumina, and particles in angular shape. The soil was characterized as a clayey sand, geologically known as a lateritic soil, with high percentages of alumina and iron oxide, and particles with rounded shape. Both the Soil and the blends presented low plasticity, while the residue showed a medium plasticity. Direct shear tests showed that the addition of RPP did not cause major changes into blends’ friction angle data, however, it was possible to note that, for the proportions studied, that is a tendency of obtain lower shear stresses for higher percentages of RPP in the blends. Both pure soil and 5% mixture showed a punching disruption for the Plate load test. For this same test, the allowable stress for 5% mixture was 44% higher than the pure soil, and smaller vertical settlement results for all stresses.

Análise de microestrutura e de características geotécnicas de misturas de resíduo de polimento de porcelanato e solo

Brazil is a country in development, rich in natural resources. In order to grow sustainably, it is necessary to Brazil to preserve its environment, which is an expressive challenge, especially to industries, such as those producing ceramic materials. This study was developed using Porcelain Tile Polishing Residue (RPP) in blends with soil to build compacted fills. This residue is a slurry generated during the polishing process of porcelain tiles and contains powdery material from the polished tile, the abrasives used during the process and cooling water. The RPP was collected from a private company located in Conde/PB and it was mixed with a sandy-clayey soil, to build the fills. Laboratorial tests were conducted with pure soil, pure RPP and blends in proportions of 5%, 10%, 15% and 20% of RPP in addition to the dry mass of pure soil. The Chemical and Physical Characterization tests performed were: specific solid weight, grain size distribution, laser analysis of grain size distribution, Atterberg limits, X ray fluorescence, X ray diffraction, scanning electron microscopy and soil compaction,. The materials and blends were also compacted and direct shear tests and plate load tests were performed. Plate load tests were conducted using a circular plate with 30 cm diameter, on specimens of pure soil and 5% blend, compacted in a metallic box inside the Soil Mechanics Laboratory of the Federal University of Rio Grande do Norte, Brazil. Both mechanical tests performed were conducted under inundated conditions, willing to reduce the influence of soil suction. An evaluation of the results of the tests performed shows that RPP is a fine material, with grain size distribution smaller than 0,015mm, composed mainly of silica and alumina, and particles in angular shape. The soil was characterized as a clayey sand, geologically known as a lateritic soil, with high percentages of alumina and iron oxide, and particles with rounded shape. Both the Soil and the blends presented low plasticity, while the residue showed a medium plasticity. Direct shear tests showed that the addition of RPP did not cause major changes into blends’ friction angle data, however, it was possible to note that, for the proportions studied, that is a tendency of obtain lower shear stresses for higher percentages of RPP in the blends. Both pure soil and 5% mixture showed a punching disruption for the Plate load test. For this same test, the allowable stress for 5% mixture was 44% higher than the pure soil, and smaller vertical settlement results for all stresses.

A política da emoçao. Análise de La Razón de mi Vida de Eva Perón

A minha intençao neste trabalho é analisar a obra de María Eva Duarte de Perón, La Razón de mi Vida, colocando a atençao no conteúdo fortemente emotivo da mesma. O livro foi publicado em 1951, um ano antes da sua morte, e foi a fonte das diversas versoes do mito de Evita, sendo também criticado como mais um instrumento de propaganda política, produto de um ghost-writter. Tentando ir além desta idéia, abordarei o texto como um documento historicamente situado, no qual a retórica da emoçao "justifica" o lugar de Eva Duarte na política nacional e coloca o sentimento como um principio de identidade do partido

A política da emoçao. Análise de La Razón de mi Vida de Eva Perón

A minha intençao neste trabalho é analisar a obra de María Eva Duarte de Perón, La Razón de mi Vida, colocando a atençao no conteúdo fortemente emotivo da mesma. O livro foi publicado em 1951, um ano antes da sua morte, e foi a fonte das diversas versoes do mito de Evita, sendo também criticado como mais um instrumento de propaganda política, produto de um ghost-writter. Tentando ir além desta idéia, abordarei o texto como um documento historicamente situado, no qual a retórica da emoçao "justifica" o lugar de Eva Duarte na política nacional e coloca o sentimento como um principio de identidade do partido

A política da emoçao. Análise de La Razón de mi Vida de Eva Perón

A minha intençao neste trabalho é analisar a obra de María Eva Duarte de Perón, La Razón de mi Vida, colocando a atençao no conteúdo fortemente emotivo da mesma. O livro foi publicado em 1951, um ano antes da sua morte, e foi a fonte das diversas versoes do mito de Evita, sendo também criticado como mais um instrumento de propaganda política, produto de um ghost-writter. Tentando ir além desta idéia, abordarei o texto como um documento historicamente situado, no qual a retórica da emoçao "justifica" o lugar de Eva Duarte na política nacional e coloca o sentimento como um principio de identidade do partido

Educação ambiental no curso de técnico de edificações - ifsul campus Pelotas : desafios e possibilidades da educação emancipatória nos cursos técnicos

O presente trabalho de dissertação de mestrado visa a descortinar as contradições que estão presentes nas representações de docentes e discentes da disciplina de práticas construtivas do Curso Técnico de Edificações, do Instituto Federal Sul-Rio-Grandese (IFSul), campus Pelotas, em suas relações sócioeducativas, encontrando nesse desvelamento alternativas para o desenvolvimento destas atividades práticas de forma a contribuir na sustentabilidade do curso, e por conseguinte na sustentabilidade das relações entre homens, natureza e meio ambiente. A partir dessas representações sociais e contradições, esse trabalho possibilitou, através de um estudo de caso de natureza qualitativa dialética, de posse das categorias do Materialismo Dialético e Histórico e da economia política, uma compreensão dialética de como o modo de produção capitalista interfere nas ações em geral, inclusive nas relações de educação. A opção por esse assunto foi principalmente devido a constatações próprias, como professor de práticas construtivas, da necessidade de continuidade das atividades práticas no curso, mas de uma maneira mais coerente com as leis da natureza, por um processo educativo emancipador de educadores e educandos, socializando os saberes libertadores da educação ambiental. O estudo mostrou-se coerente e revelador materializando-se em possibilidades, projetos e ações imediatas de transformações dentro do curso de maneira a interferir nas relações de todos entre si e com a natureza, com uma forma possível de utilizar as matériasprimas necessárias sem o desperdício, com o máximo de aproveitamento e reciclagem, com a possibilidade de levar essas aulas práticas para fora dos muros da escola, em atividades necessárias para entidades assistenciais, minimizando a geração de resíduos sólidos a serem descartados na natureza, contribuindo dessa maneira com o perfeito relacionamento homem-homem, homem-natureza, na busca da sustentabilidade e na conservação da vida no Planeta.

Controle social e políticas públicas: contribuições para aprimorar o controle social do programa nacional de alimentação escolar

The National School Feeding Programme (PNAE) is a public policy in Brazil for over 60 years and represents one of the most important programs of feeding and nutrition in the world. The role of family farming as a source of employment in rural areas, food provider and for ensuring much of the Brazil’s food security is constantly present at the government's and social movement’s agendas. Law 11.947 of 2009 marked its integration in the food supply for the National School Feeding Programme. Article 14 of aforementioned law highlights that a minimum of 30% (thirty percent) of the funds transferred by the National Development Fund Education (FNDE) to the Programme must be used for the purchase of food directly from family farmers or their organizations. The national school feeding policy under the responsibility of the FNDE and is subjected to agencies of internal control, such as the General Controllership of the Union (CGU), of external control, such as the Audit Courts of the Union and the of the states, and to the social control of the school feeding councils. Those funds are transferred to the implementing agencies, which are the education offices of the states, municipalities and of the Federal District. These entities must annually present their accountings to the School Feeding Councils, which analyze them and then issue a conclusive report to the FNDE, approving with or without reservations, or rejecting them. In this sense, this research aims to propose parameters that should contribute to the improvement of the social control over purchases from family farming for the National School Feeding Programme. The study was conducted by non parametric sampling alongside the managers of the implementing entities, school feeding councils and Family Farming Organizations all across Brazil, from the databases provided by FNDE and by the National Union of Cooperatives of Family Agriculture and Solidarity Economy (Unicafes). The study points out that the legal framework of PNAE seeks to ensure the participation of family farming in the food supply for the Programme, despite allowing the executing agencies to justify the non-compliance of the minimum required in a number of ways. The survey also signalizes that the school feeding councils follow the implementation of the Programme very shyly, and points out that there is room to expand and enhance the participation of these councils and organizations of family farming in the execution of PNAE. Its effectiveness requires a constant and effective process of training of the agents involved in the Programme.

Valorização de resíduos provenientes da atividade no setor avícola: aplicação do processo de compostagem

O setor avícola, como setor em constante crescimento está associado à produção de elevadas quantidades de resíduos sólidos orgânicos. A crescente taxa de produção de resíduos avícolas leva à necessidade de lhes dar um destino adequado podendo a valorização orgânica, nomeadamente a compostagem, ser uma opção. O presente estudo pretende dar um contributo para o projeto de uma unidade de compostagem numa empresa portuguesa do setor, com valorização dos resíduos produzidos pela mesma, avaliando o potencial de aplicação desta operação de tratamento de resíduos e a qualidade do produto final. Como primeiro passo foi realizada uma caracterização dos resíduos a utilizar de forma a perceber a sua possível influência no processo de degradação. Os ensaios de compostagem foram realizados à escala laboratorial, numa gama de temperatura de 50 a 55ᵒC, utilizando como substrato base uma mistura dos resíduos avícolas, de acordo com os seus quantitativos de produção. Vários potenciais agentes estruturantes foram também testados, como adição ao substrato. A monitorização do processo foi feita com base em análises das fases gasosa (gases de exaustão), sólida (substrato em decomposição) e líquida (lixiviado). A avaliação do processo foi ainda complementada com a caracterização dos produtos finais obtidos, os quais foram ainda sujeitos a testes de fitotoxicidade. Foram observados graus de conversão de matéria orgânica relativamente altos (40-50%), comprovando a aplicabilidade desta operação de tratamento de resíduos. Embora a diferença entre ensaios tenha sido pouco notória, a utilização de uma combinação de cama de aviário e mato destroçado e compostado aparenta ser ligeiramente mais eficiente, enquanto a utilização de casca de eucalipto produziu os piores resultados. Perdas de humidade e de azoto foram as duas situações mais críticas observadas para os vários ensaios, tendo influência tanto sobre o processo como sobre o produto final. Os compostos obtidos revelam baixa qualidade, exibindo valores elevados de pH e condutividade elétrica e elevadas concentrações de metais pesados, tais como cobre e zinco. Supõe-se que as características adversas verificadas estejam associadas à aplicação de quantidades demasiado elevadas de cinza nos substratos, levando à necessidade de redução deste material; estudos adicionais seriam necessários a fim de avaliar as possibilidades de ajuste das quantidades a utilizar, dos diferentes materiais, com o intuito de produzir um produto final com qualidade, respeitando os requisitos legais.