An assessment of Pythium spp. associated with soft rot disease of ginger (Zingiber officinale) in Queensland, Australia

In Australia, Pythium soft rot (PSR) outbreaks caused by P. myriotylum were reported in 2009 and since then this disease has remained as a major concern for the ginger industry. From 2012 to 2015, a number of Pythium spp. were isolated from ginger rhizomes and soil from farms affected by PSR disease and assessed for their pathogenicity on ginger. In this study, 11 distinct Pythium spp. were recovered from ginger farms in Queensland, Australia and species identification and confirmation were based on morphology, growth rate and ITS sequences. These Pythium spp. when tested showed different levels of aggressiveness on excised ginger rhizome. P. aphanidemartum, P. deliense, P. myriotylum, P. splendens, P. spinosum and P. ultimum were the most pathogenic when assessed in vitro on an array of plant species. However, P. myriotylum was the only pathogen, which was capable of inducing PSR symptoms on ginger at a temperature range from 20 to 35 °C. Whereas, P. aphanidermatum only attacked and induced PSR on ginger at 30 to 35 °C in pot trials. This is the first report of P. aphanidermatum inducing PSR of ginger in Australia at high temperatures. Only P. oligandrum and P. perplexum, which had been recovered only from soils and not plant tissue, appeared non-pathogenic in all assays.

Influence of substrates composition on immunomodulation by MSCs

Mesenchymal stem cells (MSCs) are non-hematopoietic multipotent stem cells capable to self-renew and differentiate along different cell lineages. MSCs can be found in adult tissues and extra embryonic tissues like the umbilical cord matrix/Wharton’s Jelly (WJ). The latter constitute a good source of MSCs, being more naïve and having a higher proliferative potential than MSCs from adult tissues like the bone marrow, turning them more appealing for clinical use. It is clear that MSCs modulate both innate and adaptive immune responses and its immunodulatory effects are wide, extending to T cells and dendritic cells, being therapeutically useful for treatment of immune system disorders. Mechanotransduction is by definition the mechanism by which cells transform mechanical signals translating that information into biochemical and morphological changes. Here, we hypothesize that by culturing WJ-MSCs on distinct substrates with different stiffness and biochemical composition, may influence the immunomodulatory capacity of the cells. Here, we showed that WJ-MSCs cultured on distinct PDMS substrates presented different secretory profiles from cells cultured on regular tissue culture polystyrene plates (TCP), showing higher secretion of several cytokines analysed. Moreover, it was also shown that WJ-MSCs cultured on PDMS substrates seems to possess higher immunomodulatory capabilities and to differentially regulate the functional compartments of T cells when compared to MSCs maintained on TCP. Taken together, our results suggest that elements of mechanotransduction seem to be influencing the immunomodulatory ability of MSCs, as well as their secretory profile. Thus, future strategies will be further explored to better understand these observation and to envisage new in vitro culture conditions for MSCs aiming at distinct therapeutic approaches, namely for immune-mediated disorders.

Variação sazonal da concentração de nutrientes em folhas de bananeiras, no Vale do Ribeira-SP

The Vale do Ribeira, SP, main agricultural activity is the banana crop, which accounts for most of this fruit production in the State of São Paulo. The nutritional balance of the plant is one of the most important factors for the banana plant can complete the cycle and achieve high productivity. Aiming to evaluate the seasonal variation of leaf nutrient concentration in banana plants in Vale do Ribeira-SP, we used the results of 252 chemical analyses of plant tissue, collected from August 2009 to September 2010, in the 18 representative properties for the region, ten cultivated with subgroup Cavendish banana plant and eight of subgroup Prata banana plant. The largest variation between the macronutrient occurred for K and S, and among the micronutrients, especially for Fe and B. In some dates of evaluation, there was a higher leaf concentration of P, K, Ca and Zn, in subgroup Cavendish banana plants, while the subgroup Prata banana plants showed higher leaf concentration, especially of Mn, B and N. Climatic conditions, especially rain, influenced the leaf nutrient content, especially for K, N, S, B and Fe.

Biological activity of Pyrrole-Imidazole polyamides in vivo

This thesis focuses on biological activity of pyrrole-imidazole polyamides in vivo. The work presented includes experiments underlining sequence selectivity of these compounds in living cells and potential methods to improve it. A large fraction of this thesis is devoted to activity of Py-Im in murine models of cancer. We investigated the pharmacokinetics and biodistribution of two compounds – targeted to 5'-WGGWCW-3' and 5'-WTWCGW-3' sequences – and characterized their activity by measuring their effects on tumor growth, gene expression in vivo and in tissue culture, and their effects on physiology of tumors. The initial theoretical studies suggested that a large fraction of genomic sites are bound by Py-Im polyamides non-specifically and experimental data shows that the programmed binding sequence is not a sole determinant of the patterns of gene regulation. Despite the likely presence of non-specific effects of Py-Im polyamides in living cells, in vivo administration of Py-Im polyamides resulted in tolerable host toxicity and anti-tumor activity. Py-Im polyamide targeted to Estrogen Receptor Response Element showed downregulation of ER-driven gene expression in tumor cells, while the compound targeted to hypoxia response element reduced vascularization of tumors and their growth rate, induced apoptosis of cells in hypoxic areas and reduced expression of proangiogenic and prometastatic factors. Further studies, showed that polyamides distributed to many of the tested tissues and their FITC-conjugates showed nuclear uptake. The gene expression effects were also present in murine tissues, such as liver and kidneys, indicating a potential for use for Py-Im polyamides in non-cancerous diseases.

Diferencia de daños por herbívoros entre hojas jóvenes de color rojo y verde, ¿podría tratarse de mimetismo vegetal?

La presencia de coloración roja en las hojas jóvenes de algunas especies vegetales en los bosques tropicales podría servir como una señal para los herbívoros de la presencia de defensas químicas en las mismas, que tendría como consecuencia el escape al daño por los herbívoros. Los objetivos específicos de este trabajo fueron comparar entre hojas jóvenes verdes y rojas: a) los niveles de daño por herbívoros, b) la dureza y c) la aceptabilidad de tejido vegetal por herbívoros generalistas (saltamontes Vellea mexicana). Las hojas jóvenes rojas presentaron significativamente menor daño por herbívoros que las hojas jóvenes verdes; la dureza fue también significativamente menor en las hojas jóvenes rojas, mientras que la aceptabilidad de follaje por herbívoros no mostró diferencia significativa entre los dos tipos de hojas. Se sugiere que la coloración roja podría representar una estrategia efectiva de baja inversión de recursos que estaría permitiendo a las vulnerables hojas jóvenes escapar al daño causado por los herbívoros.

Conservação in vitro de amoreira-preta: Crescimento lento.

2016

The Growth of Muscle Cell of Inbred Chicken and Indigeneous Chicken Embryo in The Medium of Rabbit Serum and Sheep Serum

An experiment on the growth embryonic muscle cell in the rabbit and sheep serum media was conducted in the Biotechnology Laboratory of Gadjah Mada University, Yogyakarta. The aim of this experiment was to observe the potency of the growth of embryonic muscle cell of the inbred chicken and indigeneous chicken in the medium of rabbit and sheep serum. Two kinds of embryo, the inbred and indigeneous chicken of eleven days old were used in the experiment. The rabbit and the sheep serum were prepared in the laboratory. The experiment was conducted by applying Nested Classification with basic Complete Randomized Design (CRD). Data collected was analyzed using analysis of variance and also using a proliferation index formula. Samples used in those research were the inner and outer cell nucleus after fourty eight hours of the growth. The result of the experiment indicated that the index of proliferation of embryonic muscle cell of the inbred chicken in the rabbit and sheep serum were 89.65 and 84.92 percent respectively. Whereas, the proliferation index of embryonic muscle cell of the indigeneous chicken in the rabbit and sheep serum were 86.20 and 84.82 percent respectively. The total of inner muscle cell nuclei of inbred chicken embryos was significantly higher (P<0.01) than those of indigeneous chicken embryos either in the rabbit or sheep serum, but there was no difference between the serum (P>0.05). inconclusion the muscle cell of inbred and indigeneous chicken embryos could growth in both serum but the growth muscle cell of inbred chicken embryo was better than that of indigeneous chicken embryo. (Animal Production 2(2): 75-82 (2000) Key words : tissue culture, chicken embryos, index proliferation, serum.

Somatic embryogenesis, organogenesis and plant regeneration in taro (Colocasia esculenta var. esculenta)

Callus was initiated in three different ‘‘esculenta’’ taro cultivars by culturing corm slices in the dark on half-strength MS medium supplemented with 2.0 mg/l 2,4- dichlorophenoxyacetic acid (2,4-D) for 20 days followed by subculture of all corm slices to half-strength MS medium containing 1.0 mg/l thidiazuron (TDZ). Depending on the cultivar, 20–30% of corm slices produced compact, yellow, nodular callus on media containing TDZ. Histological studies revealed the presence of typical embryogenic cells which were small, isodiametric with dense cytoplasms. Somatic embryos formed when callus was transferred to hormone-free medium and *72% of the embryos germinated into plantlets on this medium. Simultaneous formation of roots and shoots during germination, and the presence of shoot and root poles revealed by histology, confirmed that these structures were true somatic embryos. Plants derived from somatic embryos appeared phenotypically normal following 2 months growth in a glasshouse. This method is a significant advance on those previously reported for the esculenta cultivars of taro due to its efficiency and reproducibility.

Initiation of embryogenic cell suspensions of taro (Colocasia esculenta var. esculenta) and plant regeneration

Embryogenic callus was initiated by culturing in vitro taro corm slices on agar-solidified half-strength MS medium containing 2.0 mg/L 2,4-dichlorophenoxyacetic acid (2,4-D) for 20 days followed by transfer to 1.0 mg/L thidiazuron (TDZ). Callus was subsequently proliferated on solid medium containing 1.0 mg/L TDZ, 0.5 mg/L 2,4- D and 800 mg/L glutamine before transfer to liquid medium containing the same components but with reduced glutamine (100 mg/L). After 3 months in liquid culture on an orbital shaker, cytoplasmically dense cell aggregates began to form. Somatic embryogenesis was induced by plating suspension cells onto solid media containing reduced levels of hormones (0.1 mg/L TDZ, 0.05 mg/L 2,4-D), high concentrations of sucrose (40–50 g/L) and biotin (1.0 mg/L). Embryo maturation and germination was then induced on media containing 0.05 mg/L benzyladenine (BA) and 0.1 mg/L indole-3-acetic acid (IAA). Histological studies of the developing embryos revealed the presence of typical shoot and root poles suggesting that these structures were true somatic embryos. The rate of somatic embryos formation was 500–3,000 per mL settledcell volume while approximately 60% of the embryos regenerated into plants.

Repair of calvarial defects with customized tissue-engineered bone grafts - I. Evaluation of osteogenesis in a three-dimensional culture system

Bone generation by autogenous cell transplantation in combination with a biodegradable scaffold is one of the most promising techniques being developed in craniofacial surgery. The objective of this combined in vitro and in vivo study was to evaluate the morphology and osteogenic differentiation of bone marrow derived mesenchymal progenitor cells and calvarial osteoblasts in a two-dimensional (2-D) and three-dimensional (3-D) culture environment (Part I of this study) and their potential in combination with a biodegradable scaffold to reconstruct critical-size calvarial defects in an autologous animal model [Part II of this study; see Schantz, J.T., et al. Tissue Eng. 2003;9(Suppl. 1):S-127-S-139; this issue]. New Zealand White rabbits were used to isolate osteoblasts from calvarial bone chips and bone marrow stromal cells from iliac crest bone marrow aspirates. Multilineage differentiation potential was evaluated in a 2-D culture setting. After amplification, the cells were seeded within a fibrin matrix into a 3-D polycaprolactone (PCL) scaffold system. The constructs were cultured for up to 3 weeks in vitro and assayed for cell attachment and proliferation using phase-contrast light, confocal laser, and scanning electron microscopy and the MTS cell metabolic assay. Osteogenic differentiation was analyzed by determining the expression of alkaline phosphatase (ALP) and osteocalcin. The bone marrow-derived progenitor cells demonstrated the potential to be induced to the osteogenic, adipogenic, and chondrogenic pathways. In a 3-D environment, cell-seeded PCL scaffolds evaluated by confocal laser microscopy revealed continuous cell proliferation and homogeneous cell distribution within the PCL scaffolds. On osteogenic induction mesenchymal progenitor cells (12 U/L) produce significantly higher (p < 0.05) ALP activity than do osteoblasts (2 U/L); however, no significant differences were found in osteocalcin expression. In conclusion, this study showed that the combination of a mechanically stable synthetic framework (PCL scaffolds) and a biomimetic hydrogel (fibrin glue) provides a potential matrix for bone tissue-engineering applications. Comparison of osteogenic differentiation between the two mesenchymal cell sources revealed a similar pattern.

Genotype x culture media interaction effects on regeneration response of three indica rice cultivars

Interactive effects of genotypes with callus induction and regeneration media combinations on green plantlet regeneration response were studied for three indica rice (Oryza sativa L.) cultivars, IR-72, IR-54 and Karnal Local. Isolated mature-embryoswere used to derive scutellar callus and fifteen media combinations involvingMS, N6, R2, SK1 and some modifications were tested. Regeneration percentage as well as the shoot-bud induction frequency were influenced by genotype, callus induction medium, regeneration medium, interaction between genotype and the two media (callus induction and regeneration) as well the interaction between the callus induction medium and regeneration medium. Basal media combination of SK1m (callusing) and MS (regeneration) was found to be the best for cv. Karnal Local in which regeneration frequency of 88% and shoot-bud induction of 233% was observed. In IR-72, the highest regeneration frequency of 47.5% and shoot-bud induction frequency of 77% was obtained on MS-MS combination. In IR-54, highest regeneration frequency (25%) was recorded on MMS(N)-MMS(N) combination, whereas, highest frequency of shoot-bud induction (50%) was observed on MMS(S)-MS combination. Although genotype and the composition of the callus induction basal medium were the major determinants of regeneration response, an overall analysis of variation also revealed a significant interaction between the media used for de-differentiation (callusing) and re-differentiation (plantlet regeneration)

In vitro pre-vascularisation of tissue-engineered constructs: A co-culture perspective

In vitro pre-vascularization is one of the main vascularization strategies in the tissue engineering field. Culturing cells within a tissue-engineered construct (TEC) prior to implantation provides researchers with a greater degree of control over the fate of the cells. However, balancing the diverse range of different cell culture parameters in vitro is seldom easy and in most cases, especially in highly vascularized tissues, more than one cell type will reside within the cell culture system. Culturing multiple cell types in the same construct presents its own unique challenges and pitfalls. The following review examines endothelial-driven vascularization and evaluates the direct and indirect role other cell types have in vessel and capillary formation. The article then analyses the different parameters researchers can modulate in a co-culture system in order to design optimal tissue-engineered constructs to match desired clinical applications.

Assessing organizational culture in complex sociotechnical systems : Methodological evidence from studies in nuclear power plant maintenance organizations

Failures in industrial organizations dealing with hazardous technologies can have widespread consequences for the safety of the workers and the general population. Psychology can have a major role in contributing to the safe and reliable operation of these technologies. Most current models of safety management in complex sociotechnical systems such as nuclear power plant maintenance are either non-contextual or based on an overly-rational image of an organization. Thus, they fail to grasp either the actual requirements of the work or the socially-constructed nature of the work in question. The general aim of the present study is to develop and test a methodology for contextual assessment of organizational culture in complex sociotechnical systems. This is done by demonstrating the findings that the application of the emerging methodology produces in the domain of maintenance of a nuclear power plant (NPP). The concepts of organizational culture and organizational core task (OCT) are operationalized and tested in the case studies. We argue that when the complexity of the work, technology and social environment is increased, the significance of the most implicit features of organizational culture as a means of coordinating the work and achieving safety and effectiveness of the activities also increases. For this reason a cultural perspective could provide additional insight into the problem of safety management. The present study aims to determine; (1) the elements of the organizational culture in complex sociotechnical systems; (2) the demands the maintenance task sets for the organizational culture; (3) how the current organizational culture at the case organizations supports the perception and fulfilment of the demands of the maintenance work; (4) the similarities and differences between the maintenance cultures at the case organizations, and (5) the necessary assessment of the organizational culture in complex sociotechnical systems. Three in-depth case studies were carried out at the maintenance units of three Nordic NPPs. The case studies employed an iterative and multimethod research strategy. The following methods were used: interviews, CULTURE-survey, seminars, document analysis and group work. Both cultural analysis and task modelling were carried out. The results indicate that organizational culture in complex sociotechnical systems can be characterised according to three qualitatively different elements: structure, internal integration and conceptions. All three of these elements of culture as well as their interrelations have to be considered in organizational assessments or important aspects of the organizational dynamics will be overlooked. On the basis of OCT modelling, the maintenance core task was defined as balancing between three critical demands: anticipating the condition of the plant and conducting preventive maintenance accordingly, reacting to unexpected technical faults and monitoring and reflecting on the effects of maintenance actions and the condition of the plant. The results indicate that safety was highly valued at all three plants, and in that sense they all had strong safety cultures. In other respects the cultural features were quite different, and thus the culturally-accepted means of maintaining high safety also differed. The handicraft nature of maintenance work was emphasised as a source of identity at the NPPs. Overall, the importance of safety was taken for granted, but the cultural norms concerning the appropriate means to guarantee it were little reflected. A sense of control, personal responsibility and organizational changes emerged as challenging issues at all the plants. The study shows that in complex sociotechnical systems it is both necessary and possible to analyse the safety and effectiveness of the organizational culture. Safety in complex sociotechnical systems cannot be understood or managed without understanding the demands of the organizational core task and managing the dynamics between the three elements of the organizational culture.