Proposta de método de inspeção de radioproteção aplicada em instalações de medicina nuclear

O objetivo principal deste trabalho é implantar um método de inspeção imparcial e eficiente, visando à utilização segura e correta das radiações ionizantes no campo da medicina nuclear. Este método de inspeção aqui proposto foi aplicado em 113 serviços de medicina nuclear do país, obedecendo a uma freqüência de análise bienal (1996, 1998, 2000 e 2002). Foram estabelecidos 82 itens de radioproteção com pesos para cada item, baseados nos fatores de risco, de acordo com as normas da Comissão Nacional de Energia Nuclear (CNEN) e as recomendações da Agência Internacional de Energia Atômica. Na análise do serviço, cada item de não conformidade com as normas da CNEN gerou uma irregularidade de radioproteção, com seu peso associado. O somatório dos pesos deu a cada serviço uma pontuação final que o classificou dentro de três faixas de valores que determinaram uma tomada de decisão por parte do órgão regulador e fiscalizador: funcionamento sem restrição - menor que 100 pontos; funcionamento com restrição - igual ou maior que 100 e menor que 300 pontos; funcionamento suspenso - igual ou maior que 300 pontos. Para o caso de irregularidades reincidentes, criou-se um fator multiplicativo para a pontuação. A reincidência em qualquer item de radioproteção (irregularidade) teve seu peso multiplicado por 2n, onde n era o número de vezes em que o item encontrava-se irregular. O estabelecimento prévio de itens de radioproteção, com atribuição de pesos para cada item, procurou minimizar os valores subjetivos e pessoais presentes no julgamento e na avaliação técnica das instituições inspecionadas.

Apical closure device for transapical valve procedures?.

OBJECTIVES: Transapical transcatheter valve procedures are performed through a left minithoracotomy and require apical sutures to seal the apical access site. The use of large-calibre devices compromises any attempt to fully perform the procedure with a thoracoscopic approach or percutaneously. We report our preliminary experience in animals with a new sutureless self-expandable apical occluder, engineered to perform transapical access site closure in a minimally invasive setting with large-size introducer sheaths. METHODS: The apical occluder with extendable waist was implanted in six young pigs during an acute animal study. Under general anaesthesia, animals (mean weight: 62 ± 8 kg) received full heparinization (heparin: 100 UI/kg; activated clotting time above 250 s). Through a median sternotomy, a 21-Fr Certitude? introducer sheath (outer diameter: 25 Fr) was placed over the wire into the cardiac apex. The delivery catheter carrying the constrained apical plug was inserted into the sheath and deployed under fluoroscopic control, whereas the Certitude? was retrieved. After protamine infusion, we observed and recorded the 1-h bleeding with standard haemodynamic parameters. Animals were sacrificed, and hearts analysed. RESULTS: Six apical closure devices were successfully introduced and deployed in six pig hearts through large-size apical sheaths at first attempt. In all animals, the plugs guaranteed immediate apical sealing and traces of blood were collected in the pericardium during the 1-h observational period (mean of 16 ± 3.4 ml of blood loss per animal). Haemodynamic parameters remained stable during the entire study period and no plug dislodgement was detected with normal systemic blood pressure (mean arterial mean blood pressure: 65 ± 7 mmHg). Post-mortem analysis confirmed the full deployment and good fixation of all plugs, without macroscopic damages to the surrounding myocardium. CONCLUSIONS: This sutureless self-expandable apical occluder is a simple device capable of sealing large-size apical access sites (20-35 Fr) in an acute animal study. This approach is a step further towards less invasive transapical valve procedures in the clinical setting, and further animal tests will be performed to confirm the long-term efficacy and safety of this device.

The nitric oxide pathway in pig isolated calyceal smooth muscle.

In pig and humans, whose kidneys have a multi-calyceal collecting system, the initiation of ureteral peristalsis takes place in the renal calyces. In the pig and human ureter, recent evidence suggests that nitric oxide (NO) is an inhibitory mediator that may be involved in the regulation of peristalsis. This study was designed to assess whether the NO synthase/NO/cyclic GMP pathway modulates the motility of pig isolated calyceal smooth muscle. Immunohistochemistry revealed a moderate overall innervation of the smooth muscle layer, and no neuronal or inducible NO synthase (NOS) immunoreactivities. Endothelial NOS immunoreactivities were observed in the urothelium and vascular endothelium, and numerous cyclic GMP-immunoreactive (-IR) calyceal smooth muscle cells were found. As measured by monitoring the conversion of L-arginine to L-citrulline, Ca(2+)-dependent NOS activity was moderate. Assessment of functional effects was performed in tissue baths and showed that NO and SIN-1 decreased spontaneous and induced contractions of isolated preparations in a concentration-dependent manner. In strips exposed to NO, there was a 10-fold increase of the cyclic GMP levels compared with control preparations (P < 0.01). It is concluded that a non-neuronal NOS/NO/cyclic GMP pathway is present in pig calyces, where it may influence motility. The demonstration of cyclic GMP-IR smooth muscle cells suggests that NO acts directly on these cells. This NOS/NO/cyclic GMP pathway may be a target for drugs inhibiting peristalsis of mammalian upper urinary tract. Neurourol. Urodynam. 18:673-685, 1999.

Estudi tècnic-econòmic de l'adaptació a la Llei de Benestar Animal d'una explotació porcina de la comarca d'Osona i posterior valoració de la seva implementació

Des de la publicació de la Llei de Benestar Animal RD 1135/ 2002, de 31 d’octubre que regula els tres aspectes clau de la producció porcina‐ sistemes d’estabulació i construccions permeses; formació obligatòria dels ramaders i maneig dels animals‐ totes les granges de nova construcció han estat projectades seguint els seus preceptes. Mentre que les granges existents han hagut d’adaptar‐hi les seves instal∙lacions sota amenaça de tancament si no es complien els requisits. L’objectiu d’aquest treball ha estat l’elaboració de l’estudi tècnic‐ econòmic per a l’adaptació a la Llei de Benestar Animal d’una explotació porcina de la comarca d’Osona. Després d’avaluar la situació inicial de les instal∙lacions, establir les línies de previsió de creixement i analitzar els avantatges i inconvenients de cada sistema i model, s’opta pel sistema d’alimentació electrònic model Nedap en grup dinàmic de truges sobre sòl amb jaç de palla. Una decisió no massa extesa en granges del sud d’Europa on se sol preferir l’slat de formigó i/o superfície pavimentada, però imprescindible perquè aquesta explotació pogués aconseguir una millor gestió de les dejeccions ramaderes i assegurar una millora agronòmica de les terres de conreu. El treball conclou amb el seguiment del desenvolupament de l’alternativa escollida i una valoració dels canvis derivats de l’adaptació al Benestar Animal després del primer any i mig en ús. Les millores obtingudes en termes de maneig, funcionament de la granja, salut dels animals i índex productius són remarcables. D’una banda, cal destacar el fet de tenir un nombre de coixeres molt menor respecte les granges amb superfície dura, així com la facilitat i rapidesa en els parts degut al benestar. De l’altra,la reducció del volum de purí, l’increment de la fracció sòlida i la disponibilitat de compost per al camp. Per això, no és exagerat observar el jaç amb palla com una de les solucions més adequades i equilibrades per aquesta explotació que combina boví, porcí i terra per a la producció de cultius.

O impacto do PADCT na química e engenharia química

Among all activities related to the management of science and technology in Brazil, program monitoring and evaluation is certainly one of the less developed and most needed. There are no universal methodologies that can be applied. In essence programs can be evaluated by relating their achievements to pre-established goals. A second strategy is to compare programs similar in nature, utilizing as reference common indicators. Finally programs can be evaluated by their socio-economic impact comparing investments to outcomes. All strategies mentioned require appropriate program design monitoring and expert independent evaluation. In Brazil as in many other countries including developed ones this activity is complicated by the fact that programs vary widely in their scope and goals. In Brazil program designs often do not specify clearly their purposes and output indicators, many are not monitored properly which makes evaluation difficult. Consequently science and technology programs are difficult to be compared to each other, and even evaluated on the basis of pre-established goals. In PADCT monitoring and evaluation proved to be the most challenging activities. Two lessons however were learnt. One is that the process of monitoring and evaluation has to be continuously exposed to criticism to be perfected; and the second is that the evaluation process must not be exhausted shortly after investments since translation of scientific knowledge into industrial applications may prove to be a lengthy process. In this exercise we certainly do not pretend to evaluate the QEQ subprogram but to organize some of the information produced by different sources related to this subject, including the PADCT administration. We use somewhat each strategy described: compare the outputs of the QEQ to predetermined proposed goals (particularly in PADCT II), compare the QEQ to other PADCT subprograms, and specify some outputs in terms of technological and industrial applications. Finally, we utilize this opportunity to discuss science and technology M&E in general and the complexity of developing this area in Brazil.

Comparison of three analytical methods for the determination of quinolones in pig muscle samples

This work presents a comparison between three analytical methods developed for the simultaneous determination of eight quinolones regulated by the European Union (marbofloxacin, ciprofloxacin, danofloxacin, enrofloxacin, difloxacin, sarafloxacin, oxolinic acid and flumequine) in pig muscle, using liquid chromatography with fluorescence detection (LC-FD), liquid chromatography-mass spectrometry (LC-MS) and liquid chromatography-tandem mass spectrometry (LC-MS/MS). The procedures involve an extraction of the quinolones from the tissues, a step for clean-up and preconcentration of the analytes by solid-phase extraction and a subsequent liquid chromatographic analysis. The limits of detection of the methods ranged from 0.1 to 2.1 ng g−1 using LC-FD, from 0.3 to 1.8 using LC-MS and from 0.2 to 0.3 using LC-MS/MS, while inter- and intra-day variability was under 15 % in all cases. Most of those data are notably lower than the maximum residue limits established by the European Union for quinolones in pig tissues. The methods have been applied for the determination of quinolones in six different commercial pig muscle samples purchased in different supermarkets located in the city of Granada (south-east Spain).

Economia de átomos, engenharia molecular e catálise organometálica bifásica: conceitos moleculares para tecnologias limpas

For economical and ecological reasons, synthetic chemists are confronted with the increasing obligation of optimizing their synthetic methods. Maximizing efficiency and minimizing costs in the production of molecules and macromolecules constitutes, therefore, one of the most exciting challenges of synthetic chemistry. The ideal synthesis should produce the desired product in 100% yield and selectivity, in a safe and environmentally acceptable process. In this highlight the concepts of atom economy, molecular engineering and biphasic organometallic catalysis, which address these issues at the molecular level for the generation of "green" technologies, are introduced and discussed.

A criação do curso de engenharia química na escola nacional de química da universidade do Brasil

The goal of this work was to establish the origins of the chemical engineering course at the National School of Chemistry of the University of Brazil (at present, the School of Chemistry of the Federal University of Rio de Janeiro). There was a previous Industrial Chemistry course at the Higher School of Agriculture and Veterinary, established in 1920, following the French model. This course was the basis of the creation of the National School of Chemistry in 1933. During the 1940s, teachers and students claimed for a new course in true connection with the needs of the country and to reach full valorization of their job. The structure of the new Chemical Engineering course was approved in 1946 and the first class begun in 1952. This course was of great importance during the Brazilian industrial development during the 1950s and 1960s.

Chemical constituents from Bakeridesia pickelii Monteiro (Malvaceae) and the relaxant activity of kaempferol-3-O-beta-D-(6"-E-p -coumaroyl) glucopyranoside on guinea-pig ileum

The phytochemical investigation of Bakeridesia pickelii Monteiro led to the isolation of seven compounds: beta-sitosterol, a mixture of sitosteryl-3-O-beta-D-glucopyranoside and stigmasteryl-3-O-beta-D-glucopyranoside, vanillic acid, p-coumaric acid, quercetin 3-O-beta-D-glucopyranoside (isoquercitrin) and kaempferol-3-O-beta-D-(6"-E-p -coumaroyl) glucopyranoside (tiliroside), which was isolated as the major component. Their structures were elucidated on the basis of spectroscopic data such as IR, ¹H and 13C NMR, including two-dimensional techniques. Tiliroside relaxed the guinea-pig ileum pre-contracted with KCl 40 mM (EC50 = 9.5 ± 1.0 x 10-5 M), acetylcholine 10-6 M (EC50 = 2.3 ± 0.9 x 10-5 M) or histamine 10-6 M (EC50 = 4.1 ± 1.0 x 10-5 M) in a concentration-dependent manner.

Preparação e caracterização de blendas de quitosana/poli(álcool vinílico) reticuladas quimicamente com glutaraldeído para aplicação em engenharia de tecido

In this study, novel Chitosan/PVA based films were chemically crosslinked by glutaraldehyde, under pH=(4,00 ±0,05), in order to achieve structures tailored for wound tissue engineering applications. Both precursors and developed films were characterized by FTIR, SEM and XRD in order to determine the presence of chemicals groups and nanostructural order, respectively. The results have shown that the glutaraldehyde crosslinking have altered the crystallinity of pure chitosan and the increase on the C=N bands and simultaneous decrease on NH2 bands suggested that Chitosan/GA crosslinking has preference to occur in carbon-2 of the saccharide ring by the Schiff's base reaction. Also, FTIR spectroscopy clearly showed that crosslinking has also taken place with blends of PVA and chitosan. The mechanical properties presented high degree dependence with on the increase of the content of chitosan and glutaraldehyde. The results have indicated that, by controlling the ratio [PVA]/[chitosan] in the blends and the extent of chemical crosslinking, it was possible to tailor the hybrid network produced aiming to obtain properties of interest for the specific application.

Yield in double cropping system as affected by N fertilization rate with pig slurry in a Catalonia dryland region

Intensive swine production is an important agricultural and economical activity in Europe. The high availability of pig slurry (PS) lead to attractive fertilization strategy to reduce costs, therefore is mainly applied as fertilizer in agricultural systems. The optimization N fertilization in these areas should be taken in into to avoid nitrates losses by lixiviation and to achieve maximum efficiency in crop nutrition. Many studies have shown that PS applications can achieve satisfactory yields in different crops by partially or completely replacing synthetic fertilizers. In addition, for the last years, in Northeast Spain (Catalonia) has been widely extended the double-cropping forage system.

Avaliação de uma proposta contextualizada sobre o ensino de polarimetria nos cursos de farmácia e engenharia de alimentos, na Universidade Federal do Ceará

This work deals with an evaluation of an experimental application about polarimetry for pharmacy and food engineering courses. Foods obtained from the undergraduate students were used for demonstrating multidisciplinary concepts and these concepts were associated to the teaching of polarimetry. According to the results, the benefits of the contextualization are beyond the class and the undergraduating students became interested in control of quality of foods. From these results, it can be concluded that the experimental emphasis given is valid and creates motivation and interest for learning physico-chemistry, in comparison with the traditional methodology applied to teach polarimetry.