Local management and landscape drivers of pollination and biological control services in a Kenyan agro-ecosystem

Arthropods that have a direct impact on crop production (i.e. pests, natural enemies and pollinators) can be influenced by both local farm management and the context within which the fields occur in the wider landscape. However, the contributions and spatial scales at which these drivers operate and interact are not fully understood, particularly in the developing world. The impact of both local management and landscape context on insect pollinators and natural enemy communities and on their capacity to deliver related ecosystem services to an economically important tropical crop, pigeonpea was investigated. The study was conducted in nine paired farms across a gradient of increasing distance to semi-native vegetation in Kibwezi, Kenya. Results show that proximity of fields to semi-native habitats negatively affected pollinator and chewing insect abundance. Within fields, pesticide use was a key negative predictor of pollinator, pest and foliar active predator abundance. On the contrary, fertilizer application significantly enhanced pollinator and both chewing and sucking insect pest abundance. At a 1 km spatial scale of fields, there were significant negative effects of the number of semi-native habitat patches within fields dominated by mass flowering pigeonpea on pollinators abundance. For service provision, a significant decline in fruit set when insects were excluded from flowers was recorded. This study reveals the interconnections of pollinators, predators and pests with pigeonpea crop. For sustainable yields and to conserve high densities of both pollinators and predators of pests within pigeonpea landscapes, it is crucial to target the adoption of less disruptive farm management practices such as reducing pesticide and fertilizer inputs.

The determinants of competitive success in the interwar British radio industry

This article discusses the sources of competitive advantage in the interwar British radio industry. Specifically, it examines why sections of the industry that reaped substantial monopoly rents from the downstream value chain failed to dominate the industry. During the 1920s Marconi (which controlled the fundamental UK patents) had a key cost advantage, as had other members of the ‘Big Six’ electrical engineering firms which formed the BBC and were granted preferential royalties. Meanwhile the valve manufacturers' cartel was also able to extract high rents from set manufacturers. The vertical integration literature suggests that input monopolists have incentives to control downstream production. Yet—in contrast to the gramophone industry, which became concentrated into two huge companies following market saturation in the 1930s—radio retained a much more competitive structure. The Big Six failed to capitalize fully on their initial cost advantages owing to logistical weaknesses in supplying markets subject to rapid technical and design obsolescence. Subsequently, during the 1930s, marketing innovations are shown to have played a key role in allowing several independents to establish successful brands. This gave them sufficient scale to provide strong bargaining positions with input suppliers, negating most of their initial cost disadvantage.

Influencing energy efficient occupant behavior through improved building and control design

There is growing pressure on the construction industry to deliver energy efficient, sustainable buildings but there is evidence to suggest that, in practice, designs regularly fail to achieve the anticipated levels of in-use energy consumption. One of the key factors behind this discrepancy is the behavior of the building occupants. This paper explores how insights from experimental psychology could potentially be used to reduce the gap between the predicted and actual energy performance of buildings. It demonstrates why traditional methods to engage with the occupants are not always successful and proposes a model for a more holistic approach to this issue. The paper concludes that achieving energy efficiency in buildings is not solely a technological issue and that the construction industry needs to adopt a more user-centred approach.

Location, control and innovation in knowledge-intensive industries

The rising share of intangibles in economies worldwide highlights the crucial role of knowledge-intensive and creative industries in current and future wealth generation. The recognition of this trend has led to intense competition in these industries. At the micro-level, firms from both advanced and emerging economies are globally dispersing their value chains to control costs and leverage capabilities. The geography of innovation is the outcome of a dynamic process whereby firms from emerging economies strive to catch-up with advanced economy competitors, creating strong pressures for continued innovation. However, two distinct strategies can be discerned with regard to the control of the value chain. A vertical integration strategy emphasizes taking advantage of ‘linkage economies’ whereby controlling multiple value chain activities enhances the efficiency and effectiveness of each one of them. In contrast, a specialization strategy focuses on identifying and controlling the creative heart of the value chain, while outsourcing all other activities. The global mobile handset industry is used as the template to illustrate the theory.

State capitalism and social responsibility in China's banking industry

China’s financial system has experienced a series of major reforms in recent years. Efforts have been made towards introducing the shareholding system in state-owned commercial banks, restructuring of securities firms, re-organising equity of joint venture insurance companies, further improving the corporate governance structure, managing financial risks and ultimately establishing a system to protect investors (Xinhua, 2010). Financial product innovation, with the further opening up of financial markets and the development of the insurance and bond market, has increased liquidity as well as reduced financial risks. The U.S. subprime crisis indicated the benefit of financial innovations for the economy, but without proper control, they may lead to unexpected consequences. Kirkpatrick (2009) argues that failures and weaknesses in corporate governance arrangements and insufficient accounting standards and regulatory requirements attributed to the financial crisis. Similar to the financial crises of the last decade, the global financial crisis which sparked in 2008, surfaced a variety of significant corporate governance failures: the dysfunction of market mechanisms, the lack of transparency and accountability, misaligned compensation arrangements and the late response of government, all which encouraged management short-termism, poor risk management, as well as some fraudulent schemes. The unique characteristics of the Chinese banking system are an interesting point for studying post-crisis corporate governance reform. Considering that China modelled its governance system on the Anglo-American system, this paper examines the impact of the financial crisis on corporate governance reform in developed economies, and particularly, China’s reform of its financial sector. The paper further analyses the Chinese government’s role in bank supervision and risk management. In this regard, the paper contributes to the corporate governance literature within the Chinese context by providing insights into the contributing factors to the corporate governance failure that led to the global financial crisis. It also provides policy recommendations for China’s policy makers to seriously consider. The results suggest a need for the re-examination of corporate governance adequacy and the institutionalisation of business ethics. The paper’s next section provides a review of China’s financial system with reference to the financial crisis, followed by a critical evaluation of a capitalistic system and a review of Anglo-American and Continental European models. It then analyses the need for a new corporate governance model in China by considering the bank failures in developed economies and the potential risks and inefficiencies in a current State controlled system. The paper closes by reflecting the need for Chinese policy makers to continually develop, adapt and rewrite corporate governance practices capable of meeting the new challenge, and to pay attention to business ethics, an issue which goes beyond regulation.

High-resolution melt and morphological analyses of mealybugs (Hemiptera: Pseudococcidae) from cacao: tools for the control of Cacao Swollen Shoot Virus spread

BACKGROUND: Mealybugs (Hemiptera: Coccoidea: Pseudococcidae) are key vectors of badnaviruses, including Cacao Swollen Shoot Virus (CSSV) the most damaging virus affecting cacao (Theobroma cacao L.). The effectiveness of mealybugs as virus vectors is species dependent and it is therefore vital that CSSV resistance breeding programmes in cacao incorporate accurate mealybug identification. In this work the efficacy of a CO1-based DNA barcoding approach to species identification was evaluated by screening a range of mealybugs collected from cacao in seven countries. RESULTS: Morphologically similar adult females were characterised by scanning electron microscopy and then, following DNA extraction, were screened with CO1 barcoding markers. A high degree of CO1 sequence homology was observed for all 11 individual haplotypes including those accessions from distinct geographical regions. This has allowed for the design of a High Resolution Melt (HRM) assay capable of rapid identification of the commonly encountered mealybug pests of cacao. CONCLUSIONS: HRM Analysis (HRMA) readily differentiated between mealybug pests of cacao that can not necessarily be identified by conventional morphological analysis. This new approach, therefore, has potential to facilitate breeding for resistance to CSSV and other mealybug transmitted diseases.

Knowledge and perception of Ghanaian cocoa farmers on mirid control and their willingness to use forecasting systems

Annual losses of cocoa in Ghana to mirids are significant. Therefore, accurate timing of insecticide application is critical to enhance yields. However, cocoa farmers often lack information on the expected mirid population for each season to enable them to optimise pesticide use. This study assessed farmers’ knowledge and perceptions of mirid control and their willingness to use forecasting systems informing them of expected mirid peaks and time of application of pesticides. A total of 280 farmers were interviewed in the Eastern and Ashanti regions of Ghana with a structured open and closed ended questionnaire. Most farmers (87%) considered mirids as the most important insect pest on cocoa with 47% of them attributing 30-40% annual crop loss to mirid damage. There was wide variation in the timing of insecticide application as a result of farmers using different sources of information to guide the start of application. The majority of farmers (56%) do not have access to information on the type, frequency and timing of insecticides to use. However, respondents who are members of farmer groups had better access to such information. Extension officers were the preferred channel for information transfer to farmers with 72% of farmers preferring them to other available methods of communication. Almost all the respondents (99%) saw the need for a comprehensive forecasting system to help farmers manage cocoa mirids. The importance of accurate timing for mirid control based on forecasted information to farmer groups and extension officers was discussed.

Open Issues in Control ofAutomotive R744 Air-ConditioningSystems

In this thesis, one of the current control algorithms for the R744 cycle, which tries tooptimize the performance of the system by two SISO control loops, is compared to acost-effective system with just one actuator. The operation of a key component of thissystem, a two stage orifice expansion valve is examined in a range of typical climateconditions. One alternative control loop for this system, which has been proposed byBehr group, is also scrutinized.The simulation results affirm the preference of using two control-loops instead of oneloop, but refute advantages of the Behr alternate control approach against one-loopcontrol. As far as the economic considerations of the A/C unit are concerned, usinga two-stage orifice expansion valve is desired by the automotive industry, thus basedon the experiment results, an improved logic for control of this system is proposed.In the second part, it is investigated whether the one-actuator control approach isapplicable to a system consisting of two parallel evaporators to allow passengers tocontrol different climate zones. The simulation results show that in the case of usinga two-stage orifice valve for the front evaporator and a fixed expansion valve forthe rear one, a proper distribution of the cooling power between the front and rearcompartment is possible for a broad range of climate conditions.

INVENTORY CONTROL SYSTEM : Optimization of production system and reliability

The main idea of this research to solve the problem of inventory management for the paper industry SPM PVT limited. The aim of this research was to find a methodology by which the inventory of raw material could be kept at minimum level by means of buffer stock level.The main objective then lies in finding the minimum level of buffer stock according to daily consumption of raw material, finding the Economic Order Quantity (EOQ) reorders point and how much order will be placed in a year to control the shortage of raw material.In this project, we discuss continuous review model (Deterministic EOQ models) that includes the probabilistic demand directly in the formulation. According to the formula, we see the reorder point and the order up to model. The problem was tackled mathematically as well as simulation modeling was used where mathematically tractable solution was not possible.The simulation modeling was done by Awesim software for developing the simulation network. This simulation network has the ability to predict the buffer stock level based on variable consumption of raw material and lead-time. The data collection for this simulation network is taken from the industrial engineering personnel and the departmental studies of the concerned factory. At the end, we find the optimum level of order quantity, reorder point and order days.

Influence of hydraulics and control of thermal storage in solar assisted heat pump combisystems

This paper studies the influence of hydraulics and control of thermal storage in systems combined with solar thermal and heat pump for the production of warm water and space heating in dwellings. A reference air source heat pump system with flat plate collectors connected to a combistore was defined and modeled together with the IEA SHC Task 44 / HPP Annex 38 (T44A38) “Solar and Heat Pump Systems” boundary conditions of Strasbourg climate and SFH45 building. Three and four pipe connections as well as use of internal and external heat exchangers for DHW preparation were investigated as well as sensor height for charging of the DHW zone in the store. The temperature in this zone was varied to ensure the same DHW comfort was achieved in all cases. The results show that the four pipe connection results in 9% improvement in SPF compared to three pipe and that the external heat exchanger for DHW preparation leads to a 2% improvement compared to the reference case. Additionally the sensor height for charging the DHW zone of the store should not be too low, otherwise system performance is adversely affected

Implementation of Video Monitoring In Aluminium Industry

The aim was to evaluate results and experiences from development of new technology, a training program and implementation of strategies for the use of a video exposure monitoring method, PIMEX. Starting point of this study is an increased incidence of asthma among workers in the aluminium industry. Exposure peaks of fumes are supposed to play an important role. PIMEX makes it possible to link used work practice, use of control technology, and so forth to peaks. Nine companies participated in the project, which was divided into three parts, development of PIMEX technology, production of training material, and training in use of equipment and related strategies. The use of the video exposure monitoring method PIMEX offers prerequisites supporting workers participation in safety activities. The experiences from the project reveal the importance of good timing of primary training, technology development, technical support, and follow up training. In spite of a delay of delivery of the new technology, representatives from the participating companies declared that the experiences showed that PIMEX gave an important contribution for effective control of hazards in the companies. Eight out of nine smelters used the PIMEX method as a part of a strategy for control of workers exposure to fumes in potrooms. Possibilities to conduct effective control measures were identified. This article describes experiences from implementation of a, for this branch, new method supporting workers participation for workplace improvements.

Effective measures to decrease air contaminants through risk and control visualization : a study of the effective use of QR codes to facilitate safety training

Woodworking industries still consists of wood dust problems. Young workers are especially vulnerable to safety risks. To reduce risks, it is important to change attitudes and increase knowledge about safety. Safety training have shown to establish positive attitudes towards safety among employees. The aim of current study is to analyze the effect of QR codes that link to Picture Mix EXposure (PIMEX) videos by analyzing attitudes to this safety training method and safety in student responses. Safety training videos were used in upper secondary school handicraft programs to demonstrate wood dust risks and methods to decrease exposure to wood dust. A preliminary study was conducted to investigate improvement of safety training in two schools in preparation for the main study that investigated a safety training method in three schools. In the preliminary study the PIMEX method was first used in which students were filmed while wood dust exposure was measured and subsequently displayed on a computer screen in real time. Before and after the filming, teachers, students, and researchers together analyzed wood dust risks and effective measures to reduce exposure to them. For the main study, QR codes linked to PIMEX videos were attached at wood processing machines. Subsequent interviews showed that this safety training method enables students in an early stage of their life to learn about risks and safety measures to control wood dust exposure. The new combination of methods can create awareness, change attitudes and motivation among students to work more frequently to reduce wood dust. 

Analysis of the restructuring of the Russian defence industry (by the example of aviation industry and knaapo) and the creation of United Aviation Construction Corporation

The present study is focused on the analysis of the three main governmental measures occurred in 2000-2006 in Russian defense industry: the creation of the holding structures, the establishing of the state monopoly in arms export, and creation of the United Aviation Construction Corporation (Ob¿edinennaya Aviastroitel¿naya Corporatziya), which was initiated by the President and Government of Russian Federation in 2006. The last project assumes the consolidation and joining of all producers of civil and military aviation into one united corporation in order to save the technological and productive potential of the sector after serious crisis in 1990-s. On the other hand, this project can be considered as one of the measures to establish state control and hierarchy in the defense industry. The current project tries to analyze the necessity and the possible impacts of restructuring processes. In order to perform such analysis, I need to observe the evolution of the sector, which involves the description of the restructuring and reforming of the industry since the disintegration of the Soviet Union. The current situation in aviation sector was shaped by number of reforms performed by Government of Russian Federation, which I describe in phases: conversion, privatization, decentralization, followed by evident desire of the state to establish control over some companies. Later on, I am trying to understand the reasons lying behind all reforms of 2000-2006 and the integration of the industry. I also try to predict which impacts on the companies it will have. The last part presents the main conclusions of the paper.

Monopoly power, trade protection and growth: cross industry evidence

This paper investigates the impact of monopoly power on trade policy. Annual panel-databases of Brazilian industries for the years 1988 through 1994 were used. The regressions reported here are robust to openness indicator, concentration index, control variables and sample size, and suggest that industries with higher monopoly power are more protected than competitive sectors. In the period of study the country experienced a major trade liberalization, but the results in the paper show that the reduction in protection was smaller in sectors with higher monopoly power. We thus have evidence favoring recent growth literature which stresses that interest groups with control over creasing productivity. The results here confirm the first part of this argument and show that organized groups in fact are able to obtain policy advantages that reduce competition.

Trade barriers and productivity growth: cross-industry evidence

This article investigates the impact of trade protection on the evolution of labor productivity and total factor productivity (TFP) of the Brazilian manufacturing sector. An annual panel-dataset of 16 industries for the years 1985 through 1997, a period that includes a major trade liberalization, was used. The regressions reported here are robust to openness indicator (nominal tari®s and e®ective protection rate were used), control variables and time period and suggest that barriers to trade negatively a®ects productivity growth at industry level: those sectors with lower barriers experienced higher growth. We were also able to link the observed increase of industry productivity growth after 1991 to the widespread reduction on exective protection experienced in the country in the nineties.