Applicazione di strumenti e metodi per la gestione ambientale di un territorio vasto - Sviluppo di un sistema di gestione ambientale in un ente pubblico secondo lo schema europeo EMAS e analisi di un sistema energetico territoriale

Environmental Management includes many components, among which we can include Environmental Management Systems (EMS), Environmental Reporting and Analysis, Environmental Information Systems and Environmental Communication. In this work two applications are presented: the developement and implementation of an Environmental Management System in local administrations, according to the European scheme "EMAS", and the analysis of a territorial energy system through scenario building and environmental sustainability assessment. Both applications are linked by the same objective, which is the quest for more scientifically sound elements; in fact, both EMS and energy planning are oftec carachterized by localism and poor comparability. Emergy synthesis, proposed by ecologist H.T. Odum and described in his book "Environmental Accounting: Emergy and Environmental Decision Making" (1996) has been chosen and applied as an environmental evaluation tool, in order complete the analysis with an assessment of the "global value" of goods and processes. In particular, eMergy syntesis has been applied in order to improve the evaluation of the significance of environmental aspects in an EMS, and in order to evaluate the environmental performance of three scenarios of future evolution of the energy system. Regarding EMS, in this work an application of an EMS together with the CLEAR methodology for environmental accounting is discussed, in order to improve the identification of the environmental aspects; data regarding environmental aspects and significant ones for 4 local authorities are also presented, together with a preliminary proposal for the integration of the assessment of the significance of environmental aspects with eMergy synthesis. Regarding the analysis of an energy system, in this work the carachterization of the current situation is presented together with the overall energy balance and the evaluation of the emissions of greenhouse gases; moreover, three scenarios of future evolution are described and discussed. The scenarios have been realized with the support of the LEAP software ("Long Term Energy Alternatives Planning System" by SEI - "Stockholm Environment Institute"). Finally, the eMergy synthesis of the current situation and of the three scenarios is shown.

Impact of E22 on two-stroke and four-stroke snowmobiles

A push to reduce dependency on foreign energy and increase the use of renewable energy has many gas stations pumping ethanol blended fuels. Recreational engines typically have less complex fuel management systems than that of the automotive sector. This prevents the engine from being able to adapt to different ethanol concentrations. Using ethanol blended fuels in recreational engines raises several consumer concerns. Engine performance and emissions are both affected by ethanol blended fuels. This research focused on assessing the impact of E22 on two-stroke and four-stroke snowmobiles. Three snowmobiles were used for this study. A 2009 Arctic Cat Z1 Turbo with a closed-loop fuel injection system, a 2009 Yamaha Apex with an open-loop fuel injection system and a 2010 Polaris Rush with an open-loop fuel injection system were used to determine the impact of E22 on snowmobile engines. A five mode emissions test was conducted on each of the snowmobiles with E0 and E22 to determine the impact of the E22 fuel. All of the snowmobiles were left in stock form to assess the effect of E22 on snowmobiles currently on the trail. Brake specific emissions of the snowmobiles running on E22 were compared to that of the E0 fuel. Engine parameters such as exhaust gas temperature, fuel flow, and relative air to fuel ratio (λ) were also compared on all three snowmobiles. Combustion data using an AVL combustion analysis system was taken on the Polaris Rush. This was done to compare in-cylinder pressures, combustion duration, and location of 50% mass fraction burn. E22 decreased total hydrocarbons and carbon monoxide for all of the snowmobiles and increased carbon dioxide. Peak power increased for the closed-loop fuel injected Arctic Cat. A smaller increase of peak power was observed for the Polaris due to a partial ability of the fuel management system to adapt to ethanol. A decrease in peak power was observed for the open-loop fuel injected Yamaha.

Vergleich von Performance Measurement-Systemen zum Einsatz für die Kommissionierung

Aufgrund sich schnell verändernder Anforderungen des Marktes sind Unternehmen ständig dazu aufgefordert, ihre eigenen Prozesse und Strukturen zu überdenken und ggf. anzupassen. Von diesen Entwicklungen ist auch die Kommissionierung als Teil eines Intralogistiksystems betroffen. Um allerdings geeignete Maßnahmen ergreifen zu können, müssen Systemleistungen und –kosten permanent gemessen werden. Hierzu eignet sich der Einsatz von Performance Measurement-Systemen als Weiterentwicklung traditioneller Kennzahlensysteme. In diesem Beitrag werden verschiedene Performance Measurement-Systeme gegenüber gestellt und hinsichtlich ihrer Eignung für den Einsatz in Kommissioniersystemen bewertet. Auf Basis der Ergebnisse der Bewertung erfolgt eine erste Konzeption eines Performance Measurement-Systems für die Kommissionierung unter Verwendung typischer Kennzahlen, die in der Literatur genannt werden. Abschließend werden Hinweise zur noch notwendigen detaillierten Umsetzung und Evaluation in der Praxis gegeben.

Organic vs. Conventional Grassland Management: Do N-15 and C-13 Isotopic Signatures of Hay and Soil Samples Differ?

Distinguishing organic and conventional products is a major issue of food security and authenticity. Previous studies successfully used stable isotopes to separate organic and conventional products, but up to now, this approach was not tested for organic grassland hay and soil. Moreover, isotopic abundances could be a powerful tool to elucidate differences in ecosystem functioning and driving mechanisms of element cycling in organic and conventional management systems. Here, we studied the delta N-15 and delta C-13 isotopic composition of soil and hay samples of 21 organic and 34 conventional grasslands in two German regions. We also used Delta delta N-15 (delta N-15 plant - delta N-15 soil) to characterize nitrogen dynamics. In order to detect temporal trends, isotopic abundances in organic grasslands were related to the time since certification. Furthermore, discriminant analysis was used to test whether the respective management type can be deduced from observed isotopic abundances. Isotopic analyses revealed no significant differences in delta C-13 in hay and delta C-13 in both soil and hay between management types, but showed that delta C-13 abundances were significantly lower in soil of organic compared to conventional grasslands. delta C-15 values implied that management types did not substantially differ in nitrogen cycling. Only delta C-13 in soil and hay showed significant negative relationships with the time since certification. Thus, our result suggest that organic grasslands suffered less from drought stress compared to conventional grasslands most likely due to a benefit of higher plant species richness, as previously shown by manipulative biodiversity experiments. Finally, it was possible to correctly classify about two third of the samples according to their management using isotopic abundances in soil and hay. However, as more than half of the organic samples were incorrectly classified, we infer that more research is needed to improve this approach before it can be efficiently used in practice.

The German business and information technologies project

The Business and Information Technologies (BIT) project strives to reveal new insights into how modern IT impacts organizational structures and business practices using empirical methods. Due to its international scope, it allows for inter-country comparison of empirical results. Germany — represented by the European School of Management and Technologies (ESMT) and the Institute of Information Systems at Humboldt-Universität zu Berlin — joined the BIT project in 2006. This report presents the result of the first survey conducted in Germany during November–December 2006. The key results are as follows: • The most widely adopted technologies and systems in Germany are websites, wireless hardware and software, groupware/productivity tools, and enterprise resource planning (ERP) systems. The biggest potential for growth exists for collaboration and portal tools, content management systems, business process modelling, and business intelligence applications. A number of technological solutions have not yet been adopted by many organizations but also bear some potential, in particular identity management solutions, Radio Frequency Identification (RFID), biometrics, and third-party authentication and verification. • IT security remains on the top of the agenda for most enterprises: budget spending was increasing in the last 3 years. • The workplace and work requirements are changing. IT is used to monitor employees' performance in Germany, but less heavily compared to the United States (Karmarkar and Mangal, 2007).1 The demand for IT skills is increasing at all corporate levels. Executives are asking for more and better structured information and this, in turn, triggers the appearance of new decision-making tools and online technologies on the market. • The internal organization of companies in Germany is underway: organizations are becoming flatter, even though the trend is not as pronounced as in the United States (Karmarkar and Mangal, 2007), and the geographical scope of their operations is increasing. Modern IT plays an important role in enabling this development, e.g. telecommuting, teleconferencing, and other web-based collaboration formats are becoming increasingly popular in the corporate context. • The degree to which outsourcing is being pursued is quite limited with little change expected. IT services, payroll, and market research are the most widely outsourced business functions. This corresponds to the results from other countries. • Up to now, the adoption of e-business technologies has had a rather limited effect on marketing functions. Companies tend to extract synergies from traditional printed media and on-line advertising. • The adoption of e-business has not had a major impact on marketing capabilities and strategy yet. Traditional methods of customer segmentation are still dominating. The corporate identity of most organizations does not change significantly when going online. • Online sales channel are mainly viewed as a complement to the traditional distribution means. • Technology adoption has caused production and organizational costs to decrease. However, the costs of technology acquisition and maintenance as well as consultancy and internal communication costs have increased.

Simulation of SLA-based VM-scaling algorithms for cloud-distributed applications

Cloud Computing has evolved to become an enabler for delivering access to large scale distributed applications running on managed network-connected computing systems. This makes possible hosting Distributed Enterprise Information Systems (dEISs) in cloud environments, while enforcing strict performance and quality of service requirements, defined using Service Level Agreements (SLAs). {SLAs} define the performance boundaries of distributed applications, and are enforced by a cloud management system (CMS) dynamically allocating the available computing resources to the cloud services. We present two novel VM-scaling algorithms focused on dEIS systems, which optimally detect most appropriate scaling conditions using performance-models of distributed applications derived from constant-workload benchmarks, together with SLA-specified performance constraints. We simulate the VM-scaling algorithms in a cloud simulator and compare against trace-based performance models of dEISs. We compare a total of three SLA-based VM-scaling algorithms (one using prediction mechanisms) based on a real-world application scenario involving a large variable number of users. Our results show that it is beneficial to use autoregressive predictive SLA-driven scaling algorithms in cloud management systems for guaranteeing performance invariants of distributed cloud applications, as opposed to using only reactive SLA-based VM-scaling algorithms.

Causes, forms and consequences of the professionalization of international sport federa-tions in Switzerland: Conceptual framework and first results

Synopsis: Sport organisations are facing multiple challenges originating from an increasingly complex and dynamic environment in general, and from internal changes in particular. Our study seeks to reveal and analyse the causes for professionalization processes in international sport federations, the forms resulting from it, as well as related consequences. Abstract: AIM OF ABSTRACT/PAPER - RESEARCH QUESTION Sport organisations are facing multiple challenges originating from an increasingly complex and dynamic environment in general, and from internal changes in particular. In this context, professionalization seems to have been adopted by sport organisations as an appropriate strategy to respond to pressures such as becoming more “business-like”. The ongoing study seeks to reveal and analyse the internal and external causes for professionalization processes in international sport federations, the forms resulting from it (e.g. organisational, managerial, economic) as well as related consequences on objectives, values, governance methods, performance management or again rationalisation. THEORETICAL BACKGROUND/LITERATURE REVIEW Studies on sport as specific non-profit sector mainly focus on the prospect of the “professionalization of individuals” (Thibault, Slack & Hinings, 1991), often within sport clubs (Thiel, Meier & Cachay, 2006) and national sport federations (Seippel, 2002) or on organisational change (Griginov & Sandanski, 2008; Slack & Hinings, 1987, 1992; Slack, 1985, 2001), thus leaving broader analysis on governance, management and professionalization in sport organisations an unaccomplished task. In order to further current research on above-mentioned topics, our intention is to analyse causes, forms and consequences of professionalisation processes in international sport federations. The social theory of action (Coleman, 1986; Esser, 1993) has been defined as appropriate theoretical framework, deriving in the following a multi-level framework for the analysis of sport organisations (Nagel, 2007). In light of the multi-level framework, sport federations are conceptualised as corporative actors whose objectives are defined and implemented with regard to the interests of member organisations (Heinemann, 2004) and/or other pressure groups. In order to understand social acting and social structures (Giddens 1984) of sport federations, two levels are in the focus of our analysis: the macro level examining the environment at large (political, social, economic systems etc.) and the meso level (Esser, 1999) examining organisational structures, actions and decisions of the federation’s headquarter as well as member organisations. METHODOLOGY, RESEARCH DESIGN AND DATA ANALYSIS The multi-level framework mentioned seeks to gather and analyse information on causes, forms and consequences of professionalization processes in sport federations. It is applied in a twofold approach: first an exploratory study based on nine semi-structured interviews with experts from umbrella sport organisations (IOC, WADA, ASOIF, AIOWF, etc.) as well as the analysis of related documents, relevant reports (IOC report 2000 on governance reform, Agenda 2020, etc.) and important moments of change in the Olympic Movement (Olympic revenue share, IOC evaluation criteria, etc.); and secondly several case studies. Whereas the exploratory study seeks more the causes for professionalization on an external, internal and headquarter level as depicted in the literature, the case studies rather focus on forms and consequences. Applying our conceptual framework, the analysis of forms is built around three dimensions: 1) Individuals (persons and positions), 2) Processes, structures (formalisation, specialisation), 3) Activities (strategic planning). With regard to consequences, we centre our attention on expectations of and relationships with stakeholders (e.g. cooperation with business partners), structure, culture and processes (e.g. governance models, performance), and expectations of and relationships with member organisations (e.g. centralisation vs. regionalisation). For the case studies, a mixed-method approach is applied to collect relevant data: questionnaires for rather quantitative data, interviews for rather qualitative data, as well as document and observatory analysis. RESULTS, DISCUSSION AND IMPLICATIONS/CONCLUSIONS With regard to causes of professionalization processes, we analyse the content of three different levels: 1. the external level, where the main pressure derives from financial resources (stakeholders, benefactors) and important turning points (scandals, media pressure, IOC requirements for Olympic sports); 2. the internal level, where pressure from member organisations turned out to be less decisive than assumed (little involvement of member organisations in decision-making); 3. the headquarter level, where specific economic models (World Cups, other international circuits, World Championships), and organisational structures (decision-making procedures, values, leadership) trigger or hinder a federation’s professionalization process. Based on our first analysis, an outline for an economic model is suggested, distinguishing four categories of IFs: “money-generating IFs” being rather based on commercialisation and strategic alliances; “classical Olympic IFs” being rather reactive and dependent on Olympic revenue; “classical non-Olympic IFs” being rather independent of the Olympic Movement; and “money-receiving IFs” being dependent on benefactors and having strong traditions and values. The results regarding forms and consequences will be outlined in the presentation. The first results from the two pilot studies will allow us to refine our conceptual framework for subsequent case studies, thus extending our data collection and developing fundamental conclusions. References: Bayle, E., & Robinson, L. (2007). A framework for understanding the performance of national governing bodies of sport. European Sport Management Quarterly, 7, 249–268 Chantelat, P. (2001). La professionnalisation des organisations sportives: Nouveaux débats, nouveaux enjeux [Professionalisation of sport organisations]. Paris: L’Harmattan. Dowling, M., Edwards, J., & Washington, M. (2014). Understanding the concept of professionalization in sport management research. Sport Management Review. Advance online publication. doi: 10.1016/j.smr.2014.02.003 Ferkins, L. & Shilbury, D. (2012). Good Boards Are Strategic: What Does That Mean for Sport Governance? Journal of Sport Management, 26, 67-80. Thibault, L., Slack, T., & Hinings, B. (1991). Professionalism, structures and systems: The impact of professional staff on voluntary sport organizations. International Review for the Sociology of Sport, 26, 83–97.

A MANAGEMENT INFORMATION SYSTEM AND EVALUATION SCHEME FOR THE UNIVERSITY OF TEXAS EMPLOYEE ASSISTANCE PROGRAMS

Early Employee Assistance Programs (EAPs) had their origin in humanitarian motives, and there was little concern for their cost/benefit ratios; however, as some programs began accumulating data and analyzing it over time, even with single variables such as absenteeism, it became apparent that the humanitarian reasons for a program could be reinforced by cost savings particularly when the existence of the program was subject to justification.^ Today there is general agreement that cost/benefit analyses of EAPs are desirable, but the specific models for such analyses, particularly those making use of sophisticated but simple computer based data management systems, are few.^ The purpose of this research and development project was to develop a method, a design, and a prototype for gathering managing and presenting information about EAPS. This scheme provides information retrieval and analyses relevant to such aspects of EAP operations as: (1) EAP personnel activities, (2) Supervisory training effectiveness, (3) Client population demographics, (4) Assessment and Referral Effectiveness, (5) Treatment network efficacy, (6) Economic worth of the EAP.^ This scheme has been implemented and made operational at The University of Texas Employee Assistance Programs for more than three years.^ Application of the scheme in the various programs has defined certain variables which remained necessary in all programs. Depending on the degree of aggressiveness for data acquisition maintained by program personnel, other program specific variables are also defined. ^

A characterisation of passive and active interactions and their influence on student's achievement using Moodle LMS Logs

During the last years, there has been much concern about learning management systems' (LMS) effectiveness when compared to traditional learning and about how to assess students' participation during the course. The tracking and monitoring capabilities of most recent LMS have made it possible to analyse every interaction in the system. The issues addressed on this study are: a) Is LMS student's interaction an indicator of academic performance?; b) Are different results in performance expected between distance and in-class LMS-supported education?; c) How can LMS interactions from logs be categorised?; d) May this categorisation detect 'learning witnesses'? To answer these questions, a set of interaction types from Moodle LMS activity record logs has been analysed during two years in online and in-class Master's degrees at the UPM. The results show partial or no evidence of influence between interaction indicators and academic performance, although the proposed categorisation may help detect learning witnesses.

Evaluación de la profundidad de la fisuración superficial descendente en pavimentos asfálticos mediante técnicas de ultrasonidos. Validación teórico-práctica y modelos

La fisuración iniciada en la superficie de los pavimentos asfálticos constituye uno de los más frecuentes e importantes modos de deterioro que tienen lugar en los firmes bituminosos, como han demostrado los estudios teóricos y experimentales llevados a cabo en la última década. Sin embargo, este mecanismo de fallo no ha sido considerado por los métodos tradicionales de diseño de estos firmes. El concepto de firmes de larga duración se fundamenta en un adecuado seguimiento del proceso de avance en profundidad de estos deterioros y la intervención en el momento más apropiado para conseguir mantenerlos confinados como fisuras de profundidad parcial en la capa superficial más fácilmente accesible y reparable, de manera que pueda prolongarse la durabilidad y funcionalidad del firme y reducir los costes generalizados de su ciclo de vida. Por lo tanto, para la selección de la estrategia óptima de conservación de los firmes resulta esencial disponer de metodologías que posibiliten la identificación precisa in situ de la fisuración descendente, su seguimiento y control, y que además permitan una determinación fiable y con alto rendimiento de su profundidad y extensión. En esta Tesis Doctoral se presentan los resultados obtenidos mediante la investigación sistemática de laboratorio e in situ llevada a cabo para la obtención de datos sobre fisuración descendente en firmes asfálticos y para el estudio de procedimientos de evaluación de la profundidad de este tipo de fisuras empleando técnicas de ultrasonidos. Dichos resultados han permitido comprobar que la metodología no destructiva propuesta, de rápida ejecución, bajo coste y sencilla implementación (principalmente empleada hasta el momento en estructuras metálicas y de hormigón, debido a las dificultades que introduce la naturaleza viscoelástica de los materiales bituminosos) puede ser aplicada con suficiente fiabilidad y repetibilidad sobre firmes asfálticos. Las medidas resultan asimismo independientes del espesor total del firme. Además, permite resolver algunos de los inconvenientes frecuentes que presentan otros métodos de diagnóstico de las fisuras de pavimentos, tales como la extracción de testigos (sistema destructivo, de alto coste y prolongados tiempos de interrupción del tráfico) o algunas otras técnicas no destructivas como las basadas en medidas de deflexiones o el georradar, las cuales no resultan suficientemente precisas para la investigación de fisuras superficiales. Para ello se han realizado varias campañas de ensayos sobre probetas de laboratorio en las que se han estudiado diferentes condiciones empíricas como, por ejemplo, distintos tipos de mezclas bituminosas en caliente (AC, SMA y PA), espesores de firme y adherencias entre capas, temperaturas, texturas superficiales, materiales de relleno y agua en el interior de las grietas, posición de los sensores y un amplio rango de posibles profundidades de fisura. Los métodos empleados se basan en la realización de varias medidas de velocidad o de tiempo de transmisión del pulso ultrasónico sobre una única cara o superficie accesible del material, de manera que resulte posible obtener un coeficiente de transmisión de la señal (mediciones relativas o autocompensadas). Las mediciones se han realizado a bajas frecuencias de excitación mediante dos equipos de ultrasonidos diferentes dotados, en un caso, de transductores de contacto puntual seco (DPC) y siendo en el otro instrumento de contacto plano a través de un material especialmente seleccionado para el acoplamiento (CPC). Ello ha permitido superar algunos de los tradicionales inconvenientes que presenta el uso de los transductores convencionales y no precisar preparación previa de las superficies. La técnica de autocalibración empleada elimina los errores sistemáticos y la necesidad de una calibración local previa, demostrando el potencial de esta tecnología. Los resultados experimentales han sido comparados con modelos teóricos simplificados que simulan la propagación de las ondas ultrasónicas en estos materiales bituminosos fisurados, los cuales han sido deducidos previamente mediante un planteamiento analítico y han permitido la correcta interpretación de dichos datos empíricos. Posteriormente, estos modelos se han calibrado mediante los resultados de laboratorio, proporcionándose sus expresiones matemáticas generalizadas y gráficas para su uso rutinario en las aplicaciones prácticas. Mediante los ensayos con ultrasonidos efectuados en campañas llevadas a cabo in situ, acompañados de la extracción de testigos del firme, se han podido evaluar los modelos propuestos. El máximo error relativo promedio en la estimación de la profundidad de las fisuras al aplicar dichos modelos no ha superado el 13%, con un nivel de confianza del 95%, en el conjunto de todos los ensayos realizados. La comprobación in situ de los modelos ha permitido establecer los criterios y las necesarias recomendaciones para su utilización sobre firmes en servicio. La experiencia obtenida posibilita la integración de esta metodología entre las técnicas de auscultación para la gestión de su conservación. Abstract Surface-initiated cracking of asphalt pavements constitutes one of the most frequent and important types of distress that occur in flexible bituminous pavements, as clearly has been demonstrated in the technical and experimental studies done over the past decade. However, this failure mechanism has not been taken into consideration for traditional methods of flexible pavement design. The concept of long-lasting pavements is based on adequate monitoring of the depth and extent of these deteriorations and on intervention at the most appropriate moment so as to contain them in the surface layer in the form of easily-accessible and repairable partial-depth topdown cracks, thereby prolonging the durability and serviceability of the pavement and reducing the overall cost of its life cycle. Therefore, to select the optimal maintenance strategy for perpetual pavements, it becomes essential to have access to methodologies that enable precise on-site identification, monitoring and control of top-down propagated cracks and that also permit a reliable, high-performance determination of the extent and depth of cracking. This PhD Thesis presents the results of systematic laboratory and in situ research carried out to obtain information about top-down cracking in asphalt pavements and to study methods of depth evaluation of this type of cracking using ultrasonic techniques. These results have demonstrated that the proposed non-destructive methodology –cost-effective, fast and easy-to-implement– (mainly used to date for concrete and metal structures, due to the difficulties caused by the viscoelastic nature of bituminous materials) can be applied with sufficient reliability and repeatability to asphalt pavements. Measurements are also independent of the asphalt thickness. Furthermore, it resolves some of the common inconveniences presented by other methods used to evaluate pavement cracking, such as core extraction (a destructive and expensive procedure that requires prolonged traffic interruptions) and other non-destructive techniques, such as those based on deflection measurements or ground-penetrating radar, which are not sufficiently precise to measure surface cracks. To obtain these results, extensive tests were performed on laboratory specimens. Different empirical conditions were studied, such as various types of hot bituminous mixtures (AC, SMA and PA), differing thicknesses of asphalt and adhesions between layers, varied temperatures, surface textures, filling materials and water within the crack, different sensor positions, as well as an ample range of possible crack depths. The methods employed in the study are based on a series of measurements of ultrasonic pulse velocities or transmission times over a single accessible side or surface of the material that make it possible to obtain a signal transmission coefficient (relative or auto-calibrated readings). Measurements were taken at low frequencies by two short-pulse ultrasonic devices: one equipped with dry point contact transducers (DPC) and the other with flat contact transducers that require a specially-selected coupling material (CPC). In this way, some of the traditional inconveniences presented by the use of conventional transducers were overcome and a prior preparation of the surfaces was not required. The auto-compensating technique eliminated systematic errors and the need for previous local calibration, demonstrating the potential for this technology. The experimental results have been compared with simplified theoretical models that simulate ultrasonic wave propagation in cracked bituminous materials, which had been previously deduced using an analytical approach and have permitted the correct interpretation of the aforementioned empirical results. These models were subsequently calibrated using the laboratory results, providing generalized mathematical expressions and graphics for routine use in practical applications. Through a series of on-site ultrasound test campaigns, accompanied by asphalt core extraction, it was possible to evaluate the proposed models, with differences between predicted crack depths and those measured in situ lower than 13% (with a confidence level of 95%). Thereby, the criteria and the necessary recommendations for their implementation on in-service asphalt pavements have been established. The experience obtained through this study makes it possible to integrate this methodology into the evaluation techniques for pavement management systems.

Legal Aspects which Implement Good Practice Measures in the Management of Construction and Demolition Waste

The construction industry, one of the most important ones in the development of a country, generates unavoidable impacts on the environment. The social demand towards greater respect for the environment is a high and general outcry. Therefore, the construction industry needs to reduce the impact it produces. Proper waste management is not enough; we must take a further step in environmental management, where new measures need to be introduced for the prevention at source, such as good practices to promote recycling. Following the amendment of the legal frame applicable to Construction and Demolition Waste (C&D waste), important developments have been incorporated in European and International laws, aiming to promote the culture of reusing and recycling. This change of mindset, that is progressively taking place in society, is allowing for the consideration of C&D waste no longer as an unusable waste, but as a reusable material. The main objective of the work presented in this paper is to enhance C&D waste management systems through the development of preventive measures during the construction process. These measures concern all the agents intervening in the construction process as only the personal implication of all of them can ensure an efficient management of the C&D waste generated. Finally, a model based on preventive measures achieves organizational cohesion between the different stages of the construction process, as well as promoting the conservation of raw materials through the use and waste minimization. All of these in order to achieve a C&D waste management system, whose primary goal is zero waste generation

Solución para la delegación de identidad en Sistemas de Gestión de Identidad paneuropeos basada en infraestructuras de certificación y lenguajes formales de asertos de seguridad

La estrategia i2010 de la UE tiene como objetivo garantizar el liderazgo europeo en materia de TIC y poner los beneficios de la Sociedad de la Información al servicio de la economía, la sociedad y la calidad de vida personal, teniendo presente que los éxitos de Europa hasta la fecha se han basado en favorecer la competencia leal en los mercados de las telecomunicaciones y crear un mercado sin fronteras para contenidos y medios de comunicación digitales. En esta línea, la Comisión Europea ha establecido que los distintos estados miembros deben contribuir activamente al desarrollo y uso seguro de los servicios telemáticos entre sus ciudadanos. Más concretamente, atribuye a las Administraciones Públicas, tanto a nivel nacional, regional como local, un papel dinamizador de la Sociedad de la Información que les obliga a ofrecer paulatinamente todos los actos administrativos a los ciudadanos a través de Internet. Como primer paso para el uso seguro de los servicios telemáticos que ofrecen las instituciones públicas se hace preciso dotar a los ciudadanos de una identidad digital que les permita identificarse ante un Proveedor de Servicio o ante otros ciudadanos de manera inequívoca. Por esta razón, la mayoría de países europeos – y otros en el resto del mundo – están promoviendo, sistemas fiables de gestión de identidad electrónica (eIDM), de tal manera que los ciudadanos, las empresas y departamentos gubernamentales (incluso en Estados miembros diferentes) pueden identificar y certificar sus operaciones con precisión, rapidez y sencillez. Sin embargo, la gestión de esta identidad por las Administraciones Públicas supone un importante desafío, acentuado cuando se hace necesaria la interoperabilidad entre Administraciones de diferentes países, puesto que personas y entidades tienen credenciales de identificación diferentes en función de su propio marco jurídico nacional. Consciente del problema, en la Unión Europea se han puesto en marcha una serie de proyectos con el objetivo de conseguir la interoperabilidad de los eIDMs entre las instituciones públicas de diferentes Estados miembros. A pesar de ello, las soluciones adoptadas hasta la fecha son insuficientes porque no prevén todos los posibles casos de interacción del usuario con las instituciones. En concreto, no tienen en cuenta un aspecto muy importante que se ofrece en los distintos sistemas jurídicos nacionales, a saber, la delegación de la identidad, mediante la cual un ciudadano puede autorizar a otro para que actúe en su nombre para acceder a determinados servicios prestados por las instituciones públicas. En esta tesis se realizan un conjunto de aportaciones que dan solución a distintos aspectos de los problemas planteados y que, de forma conjunta, permiten la interoperabilidad y la delegación de identidad en determinados Sistemas de Gestión de Identidad aplicados al entorno de las Administraciones Públicas. En el caso de la delegación, se ha definido un sistema de delegación dinámica de identidad entre dos entidades genéricas que permite solucionar el problema del acceso delegado a los servicios telemáticos ofrecidos por las Administraciones Públicas. La solución propuesta se basa en la generación de un token de delegación, constituido a partir de un Certificado Proxy, que permite a la entidad que delega establecer la delegación de identidad en otra entidad en base a un subconjunto de sus atributos como delegador, estableciendo además, en el propio token de delegación, restricciones en el conjunto de servicios accesibles a la entidad delegada y el tiempo de validez de la delegación. Adicionalmente, se presentan los mecanismos necesarios tanto para poder revocar un token de delegación como para comprobar sin un token de delegación ha sido o no revocado. Para ello se propone una solución para la identificación unívoca de tokens de delegación y la creación de una nueva entidad denominada Autoridad de Revocación de Tokens de Delegación. Entre las características del sistema de delegación propuesto destaca el que es lo suficientemente seguro como para ser utilizado en el entorno de la Administración Pública, que no requiere el uso de mecanismos off‐line para la generación de la delegación y que se puede realizar la delegación de forma instantánea y sin la necesidad de trámites complejos o la participación de un elevado número de entidades. Adicionalmente, el token de delegación propuesto es perfectamente integrable en las infraestructura de clave pública actual lo que hace que, dado que gran parte de las Administraciones Públicas europeas basan sus sistemas de identidad digital en el uso de la PKI y certificados de identidad X.509, la solución pueda ser puesta en marcha en un entorno real sin necesidad de grandes cambios o modificaciones de comportamiento. En lo referente a la interoperabilidad, se realiza un análisis exhaustivo y la correspondiente evaluación de las principales propuestas de Sistemas de Gestión de Identidad orientados a conseguir la interoperabilidad realizadas hasta la fecha en el marco de la Unión Europea y se propone, a alto nivel, una arquitectura de interoperabilidad para la gestión de identidad en las Administraciones Públicas. Dicha arquitectura es lo suficientemente genérica como para poder ser aplicada tanto en el entorno pan‐Europeo como en los entornos nacionales, autonómicos y locales, de tal forma que la interoperabilidad en la gestión de la identidad esté garantizada en todos los niveles de la Administración Pública. Por último, mediante la integración de la solución de delegación dinámica de identidad y la arquitectura de interoperabilidad propuestas se presenta una solución al problema de la delegación en un escenario pan‐Europeo de gestión de identidad, dando lugar a una arquitectura global de interoperabilidad pan‐Europea con soporte a la delegación de identidad. SUMMARY The i2010 European Union Plan aims to ensure European leadership in ICT and to promote the positive contribution that information and communication technologies can make to the economic, social and personal quality of life, bearing in mind that, to date, success in Europe has been based on promoting fair competition in telecommunications markets and on creating a borderless market for contents and digital media. In this line, the European Commission has established that the different member states should contribute actively to the development and secure use of telematic services among their citizens. More specifically, it is attributed to national, regional and local Public Administrations to have a supportive role of the Information Society, requiring them to gradually provide the citizens with Internet‐based access to all administrative procedures acts. As a first step for the secure use of telematic services offered by public institutions, it is necessary to provide the citizens with a digital identity to enable them to identify themselves unequivocally to a Service Provider or to other citizens. For this reason, most European countries ‐ and others in the rest of the world ‐ are promoting reliable systems for managing electronic identity (eIDM), so that citizens, businesses and government departments (even in different Member States) can identify and certify their operations with precision, speed and simplicity. However, the identity management by Public Administrations is a major challenge that becomes more difficult when interoperability between administrations of different countries is needed, due to the fact that individuals and entities have different identification credentials according to their own national legal framework. Aware of the problem, the European Union has launched a series of projects with the aim of achieving interoperability of eIDMs between public institutions of different Member States. However, the solutions adopted to date are insufficient because they do not foresee all possible cases of user interaction with the institutions. In particular, solutions do not take into account a very important aspect that is offered in different national legal systems, namely, the delegation of identity, by which a citizen can authorize another to act on his/her behalf to access certain services provided by public institutions. In this thesis a collection of contributions that provide solution to different aspects of the aforementioned problems are carried out. The solutions, in global, enable interoperability and identity delegation in some of the Identity Management Systems applied to Public Administration environment. In the case of delegation, a dynamic identity delegation system between generic entities is defined. This system makes it possible to solve the problem of delegated access to telematic services offered by Public Administrations. The proposed solution is based on the generation of a piece of information called delegation token. This delegation token, derived from a Proxy Certificate, allows the establishment of identity delegation by an entity that delegates (delegator) in other entity (delegatee) making use of a subset of delegator attributes. It also establishes restrictions on services that can be used by the delegated entity and the expiry date of delegation. In addition to this, the mechanisms necessary to revoke and check the revocation status of a delegation token are presented. To do this, a solution to univocally identify delegation tokens and the creation of a completely new entity, called Token Delegation Revocation Authority, are proposed. The most remarkable characteristics of the proposed delegation system are its security, enough for it to be used in the Public Administration environment, the fact that it does not require off‐line processes in order to generate the delegation, and the possibility of performing the delegation instantaneously and without neither complex processes nor the intervention of a large number of entities. The proposed delegation token can be completely incorporated into current Public Key Infrastructure (PKI). Thus, since most of the European Public Administrations base their digital identity systems on PKI and X.509 identity certificates, the solution can be adopted in a real environment without great changes or performance modifications. Regarding interoperability, an exhaustive analysis and evaluation of most significant proposals on Identity Management Systems that aim to achieve interoperability carried out in the European Union framework until now are performed. A high level identity management interoperability architecture for Public Administrations is also proposed. This architecture is sufficiently generic to be applied to both pan‐European environment and national, regional or local environments, thus interoperability in identity management at all Public Administration levels is guaranteed. Finally, through the integration of the proposed dynamic identity delegation solution and the high level interoperability architecture, a solution to the problem of identity delegation in a pan‐European identity management environment is suggested, leading to a pan‐European global interoperability architecture with identity delegation support.

Arquitectura de información para medicion de rendimiento en entornos e-manufacturing

La implantación de las tecnologías Internet ha permitido la extensión del uso de estrategias e-manufacturing y el desarrollo de herramientas para la recopilación, transformación y sincronización de datos de fabricación vía web. En este ámbito, un área de potencial desarrollo es la extensión del virtual manufacturing a los procesos de Performance Management (PM), área crítica para la toma de decisiones y ejecución de acciones de mejora en fabricación. Este trabajo doctoral propone un Arquitectura de Información para el desarrollo de herramientas virtuales en el ámbito PM. Su aplicación permite asegurar la interoperabilidad necesaria en los procesos de tratamiento de información de toma de decisión. Está formado por tres sub-sistemas: un modelo conceptual, un modelo de objetos y un marco Web compuesto de una plataforma de información y una arquitectura de servicios Web (WS). El modelo conceptual y el modelo de objetos se basa en el desarrollo de toda la información que se necesita para definir y obtener los diferentes indicadores de medida que requieren los procesos PM. La plataforma de información hace uso de las tecnologías XML y B2MML para estructurar un nuevo conjunto de esquemas de mensajes de intercambio de medición de rendimiento (PMXML). Esta plataforma de información se complementa con una arquitectura de servicios web que hace uso de estos esquemas para integrar los procesos de codificación, decodificación, traducción y evaluación de los performance key indicators (KPI). Estos servicios realizan todas las transacciones que permiten transformar los datos origen en información inteligente usable en los procesos de toma de decisión. Un caso práctico de intercambio de datos en procesos de medición del área de mantenimiento de equipos es mostrado para verificar la utilidad de la arquitectura. ABSTRAC The implementation of Internet technologies has led to e-Manufacturing technologies becoming more widely used and to the development of tools for compiling, transforming and synchronizing manufacturing data through the Web. In this context, a potential area for development is the extension of virtual manufacturing to Performance Measurement (PM) processes, a critical area for decision-making and implementing improvement actions in manufacturing. This thesis proposes a Information Architecture to integrate decision support systems in e-manufacturing. Specifically, the proposed architecture offers a homogeneous PM information exchange model that can be applied trough decision support in emanufacturing environment. Its application improves the necessary interoperability in decision-making data processing tasks. It comprises three sub-systems: a data model, a object model and Web Framework which is composed by a PM information platform and PM-Web services architecture. . The data model and the object model are based on developing all the information required to define and acquire the different indicators required by PM processes. The PM information platform uses XML and B2MML technologies to structure a new set of performance measurement exchange message schemas (PM-XML). This PM information platform is complemented by a PM-Web Services architecture that uses these schemas to integrate the coding, decoding, translation and assessment processes of the key performance indicators (KPIs). These services perform all the transactions that enable the source data to be transformed into smart data that can be used in the decision-making processes. A practical example of data exchange for measurement processes in the area of equipment maintenance is shown to demonstrate the utility of the architecture.

An abstract machine based execution model for computer architecture design and efficient implementation of logic programs in parallel.

The term "Logic Programming" refers to a variety of computer languages and execution models which are based on the traditional concept of Symbolic Logic. The expressive power of these languages offers promise to be of great assistance in facing the programming challenges of present and future symbolic processing applications in Artificial Intelligence, Knowledge-based systems, and many other areas of computing. The sequential execution speed of logic programs has been greatly improved since the advent of the first interpreters. However, higher inference speeds are still required in order to meet the demands of applications such as those contemplated for next generation computer systems. The execution of logic programs in parallel is currently considered a promising strategy for attaining such inference speeds. Logic Programming in turn appears as a suitable programming paradigm for parallel architectures because of the many opportunities for parallel execution present in the implementation of logic programs. This dissertation presents an efficient parallel execution model for logic programs. The model is described from the source language level down to an "Abstract Machine" level suitable for direct implementation on existing parallel systems or for the design of special purpose parallel architectures. Few assumptions are made at the source language level and therefore the techniques developed and the general Abstract Machine design are applicable to a variety of logic (and also functional) languages. These techniques offer efficient solutions to several areas of parallel Logic Programming implementation previously considered problematic or a source of considerable overhead, such as the detection and handling of variable binding conflicts in AND-Parallelism, the specification of control and management of the execution tree, the treatment of distributed backtracking, and goal scheduling and memory management issues, etc. A parallel Abstract Machine design is offered, specifying data areas, operation, and a suitable instruction set. This design is based on extending to a parallel environment the techniques introduced by the Warren Abstract Machine, which have already made very fast and space efficient sequential systems a reality. Therefore, the model herein presented is capable of retaining sequential execution speed similar to that of high performance sequential systems, while extracting additional gains in speed by efficiently implementing parallel execution. These claims are supported by simulations of the Abstract Machine on sample programs.

Idea relationship analysis in open innovation crowdsourcing systems

Idea Management Systems are an implementation of open innovation notion in the Web environment with the use of crowdsourcing techniques. In this area, one of the popular methods for coping with large amounts of data is duplicate de- tection. With our research, we answer a question if there is room to introduce more relationship types and in what degree would this change affect the amount of idea metadata and its diversity. Furthermore, based on hierarchical dependencies between idea relationships and relationship transitivity we propose a number of methods for dataset summarization. To evaluate our hypotheses we annotate idea datasets with new relationships using the contemporary methods of Idea Management Systems to detect idea similarity. Having datasets with relationship annotations at our disposal, we determine if idea features not related to idea topic (e.g. innovation size) have any relation to how annotators perceive types of idea similarity or dissimilarity.