987 resultados para Padre de pobres-Parroquia de san Martín Obispo y san Antonio Abad(Valencia)-Privilegios
Resumo:
The relative growth of U. thayeri was studied for a subtropical mangrove population in the estuary of the Comprido and Escuro rivers, Ubatuba, São Paulo State, Brazil. The evaluation of the morphological sexual maturity of U. thayeri was performed using the allometric technique. Remarkable ontogenetic changes were observed in the allometric growth of the male major cheliped and the female abdomen, indicating that these structures are closely connected to the timing of sexual maturity. For males, the relative-growth analysis of cheliped propodus length rendered an estimate of 13.8 mm of carapace width for the size at onset of sexual maturity. A distinct growth pattern was observed for the abdomen of U. thayeri females. It has a wide puberty size range (from 10.7 to 16.8 mm of CW) compared to other brachyurans previously studied. Thus, the females' abdominal growth can be represented by three growth phases: immature, transitional, and mature. The major cheliped is the fight one in 50% of males. The median length of the male major cheliped did not differ between right- and left-handed crabs.
Resumo:
Purpose: To evaluate the microhardness of enamel treated with two different 10% carbamide peroxide bleaching materials at different time intervals. Materials and Methods: Two bleaching agents were analyzed: Opalescence (OPA) and Rembrandt (REM). The control group (CON) consisted of dental fragments maintained in artificial saliva. Bleaching was accomplished for 8 hrs per day and stored during the remaining time in an individual recipient with artificial saliva. Enamel microhardness testing was performed before the initial exposure to the treatments and after 1, 7, 14, 21, 28, 35 and 42 days. Results: the ANOVA, followed by the Bartlet and Tukey tests, showed significant differences for treatments (P < 0.00001) from day 7-day 42. From the 7th to the 14th day, OPA presented an increase of enamel microhardness over time while REM presented a decrease of microhardness. Statistical differences were not found between REM and the control group (OPA > CON = REM). From the 21st-35th day, enamel fragments bleached with OPA and REM presented a decrease of microhardness. Statistical differences of microhardness were verified among all the treatments (OPA > CON > REM). on the day 42, statistical differences were not found between OPA and the control group, but they were found between REM and the control group (OPA = CON > REM). The polynomial regression showed an increase of microhardness for OPA until the 21st day, followed by a decrease of microhardness up to the 42nd day. A decrease of microhardness for REM was verified. There were alterations in enamel microhardness as a function of bleaching time when using the two different 10% carbamide peroxide whiteners. Over a 42-day treatment time, bleaching with REM agent caused a decrease in enamel microhardness. The OPA agent initially increased the microhardness, then returned to the control level. Different bleaching materials with the same concentration of carbamide peroxide have different effects on the enamel.
Resumo:
Purpose: To investigate the microleakage of four hydrophilic adhesive systems: one multiple-bottles (Scotchbond Multi-Purpose Plus); two one-bottle (Single Bond, Stae); and one self-etching (Etch & Prime 3.0). Materials and Methods: 120 bovine incisor teeth were divided into four groups (n = 30) and Class V cavities were prepared at the cemento-enamel junction. The cavities were restored with the adhesive systems and with Z100 composite. The teeth were thermocycled 1,000 times between 5 +/- 2 degreesC and 55 +/- 2 degreesC with a dwell time of 1 min, and then placed in a 2% methylene blue dye (pH 7.0) for 4 hrs, washed and sectioned vertically through the center of the restorations. The qualitative evaluation was made by three examiners who distributed pre-established scores (0-4) for each tooth using a stereomicroscope at x30 magnification. Results: In enamel margins little microleakage was observed and the Kruskal-Wallis analysis did not show differences. In dentin margins the KruskaI-Wallis and multiple comparison analyses were applied: microleakage was significantly greater with Stae (median 3) and Scotchbond MP Plus (median 4). Single Bond (median 1) and Etch & Prime 3.0 (median 2) showed the best results in dentin margins, and the statistical analysis did not demonstrate differences in microleakage among these groups.
Resumo:
Macrobrachium petronioi, a native Brazilian fresh-water shrimp, was captured along the coast of Rio Branco, Cananeia, São Paulo State, Brazil. The eggs were green-black in early development and the average size was 1.21 mm by 0.98 mm. Macrobrachium petronioi has no free-swimming larval phase. However, newly hatched larvae possessed several zoea I characters. Therefore, they were clearly more developed than newly hatched larvae of other species of Macrobrachium with prolonged larval development. The average duration of larval development in M. petronioi was 5.5 days. During early development, the larvae subsisted on stored yolk. After the third molt, the postlarvae accepted food. The three zoeal stages prior to the postlarval stage were described and characterized, with detailed morphological analyses. This species has a partially abbreviated type of development. The larval development of M. petronioi is distinguished from that of M. potiuna.
Resumo:
Purpose: To evaluate the in vitro cytotoxic effects of three cleansing solutions used for chemical lavage of pulp exposures. Materials and Methods: the immortalized odontoblast cell line (MDPC-23) was plated (30,000 cells/cm(2)) and incubated for 72 hrs in 24-well dishes. After counting the cell number under inverted light microscopy, 20 mul of the experimental and control solutions were added to 980 mul of fresh culture medium. Then, hydrogen peroxide (3%, H2O2), sodium hypochlorite (6%, NaOCl) or calcium hydroxide-saline solution (5g of Ca(OH)(2) in 10 mi of sterile distilled water) were added to wells for experimental Groups 1, 2 and 3, respectively. The positive and negative control groups received Syntac Sprint bonding agent (SS) and phosphate buffered saline (PBS), respectively. Following incubation for 120 min the cell number was counted again, the cell morphology was evaluated by scanning electron microscopy (SEM) and the cell metabolism was determined by the methyltetrazolium (MTT) assay. The scores obtained from cell counting and MTT assay were analyzed with an ANOVA followed by Fisher's PLSD tests. Results: H2O2 NaOCl solutions, and SS bonding agent were more cytotoxic than Ca(OH)2 or PBS. In the groups with H2O2 Or SS, only a few cells remained attached to the bottom of wells. The difference between these two groups was not statistically significant. H2O2, NaOCl and SS depressed the mitochondrial enzyme response by 97.7%, 97.3%, and 95.0%, respectively. on the other hand, Ca(OH)2 depressed the metabolic activity of cells by only 5%. While H2O2, NaOCl and SS caused extreme changes on the cell morphology, neither Ca(OH)2 nor PBS promoted dramatic changes in the cell morphology.
Resumo:
Incluye Bibliografía
Resumo:
Incluye Bibliografía
Resumo:
Incluye Bibliografía
Resumo:
Incluye Bibliografía
Resumo:
Incluye Bibliografía
Resumo:
The texture of concrete blocks is very important and is often the decisive factor when choosing a product, particularly if the building specifications does not dispense with the high resistance of the blocks, but has the purpose of reducing costs with finishing, therefore preferring exposed blocks with a closer texture. Furthermore, a closer texture, especially for exteriors,may be the vital factor of the building's pathology.However, there is so far no standard to quantify the texture of a structural block. This article proposes to apply the freely available UTHSCSA-Image ToolTM program developed by the University of Texas Health Science Center at San Antonio to evaluate the texture of masonry blocks. One aspect that should never be overlooked when studying masonry blocks is compressive strength. Therefore, this work also gets the compressive strength of the blocks with and without the addition of lime. The addition of small quantities of lime proved beneficial for both texture and compressive strength. However, increasing the amount of lime proved to be feasible only to improve texture. © 2012 Taylor & Francis Group.
Resumo:
Incluye Bibliografía
Resumo:
Incluye Bibliografía
Resumo:
El sistema de precios difícilmente puede eliminar la congestión en la transferencia de carga portuaria en períodos de máxima afluencia (peak), pues el uso del puerto no depende tanto de factores estacionales como sobre todo de la llegada simultánea de barcos, situación que conduce al racionamiento de su uso. En este artículo se muestra que el racionamiento eficiente debe hacerse de acuerdo con el valor de la carga transferida más que según el orden de arribo de las naves (first-come-first-served ). Se evidencia que en un racionamiento eficiente se da prioridad a la carga en contenedores, luego a la fraccionada y por último a la carga en graneles. Se aplican estos resultados a la transferencia de carga en el puerto concesionado de San Antonio Terminal Internacional de Chile.
Resumo:
Corrección: Por error en la presente edición, faltó incluir el siguiente párrafo:"Este proyecto ha contado desde su inicio con la colaboración de la Autoridad Portuaria de Barcelona, en el marco de un Acuerdo de Cooperación Tecnológica entre el Puerto de Buenos Aires y la A.P.B, quien ya cuenta con una Plataforma y un grupo de trabajo, Forum Telemático (www.apb.es). Esta experiencia de la A.P.B fue recogida en el Puerto de Buenos Aires, constituyéndose un equipo de trabajo mixto con especialistas de Buenos Aires y Barcelona, para trabajar en forma conjunta con el aporte y el apoyo del Grupo COLOBA, más todo el resto de la comunidad portuaria. Se desarrolló el Plan Maestro para la Plataforma de e-Commerce del Puerto de Buenos Aires. El mismo presenta un enfoque metodológico integrado para la implementación de una plataforma que brinde este tipo de servicios en Buenos Aires. El esfuerzo conjunto y mancomunado de todos los participantes del proyecto permitió la finalización del Plan Maestro en el período previsto, alcanzando un pleno éxito en el logro de los objetivos planteados.