Evaluation of the effect of the seed extract of Moringa oleifera Lam over the efficiency of organic filters in wastewater treatment of dairy cattle breeding

This study aimed to evaluate the effect of Moringa oleifera Lam extract on the removal of total solids (TS), total suspended solids (TSS) and chemical oxygen demand (COD), in different filter media for treating wastewater of dairy cattle breeding (DCW). The moringa seed extract was obtained by grinding 50 g of seeds in one liter of distilled water and, after passing the solution through a quantitative paper filter of 25 microns, 60 mL of the extract were added to wastewater from cattle breeding before the filtration process in organic filters made of thin coal, bamboo leaves, eucalyptus leaves, gliricidia branches and sawdust. This was followed by the completely randomized experimental design, adopting a factorial of 5 x 2. Aliquots of filtered effluent were collected and the total solids (TS) concentrations, total suspended solids (TSS) and chemical oxygen demand (COD) were determined. It was found that the increase in the efficiency of removal of COD and total solids can be attributed to the coagulating power of the moringa seed extract, wherein the filter medium with bamboo leaves presented the best performance, showing potential for use as alternative filter material in the primary treatment of DCW.

Damage control surgery: it's evolution over the last 20 years

In less than twenty years, what began as a concept for the treatment of exsanguinating truncal trauma patients has become the primary treatment model for numerous emergent, life threatening surgical conditions incapable of tolerating traditional methods. Its core concepts are relative straightforward and simple in nature: first, proper identification of the patient who is in need of following this paradigm; second, truncation of the initial surgical procedure to the minimal necessary operation; third, aggressive, focused resuscitation in the intensive care unit; fourth, definitive care only once the patient is optimized to tolerate the procedure. These simple underlying principles can be molded to a variety of emergencies, from its original application in combined major vascular and visceral trauma to the septic abdomen and orthopedics. A host of new resuscitation strategies and technologies have been developed over the past two decades, from permissive hypotension and damage control resuscitation to advanced ventilators and hemostatic agents, which have allowed for a more focused resuscitation, allowing some of the morbidity of this model to be reduced. The combination of the simple, malleable paradigm along with better understanding of resuscitation has proven to be a potent blend. As such, what was once an almost lethal injury (combined vascular and visceral injury) has become a survivable one.

IT Investment Portfolio Management Over Joint Ventures: Case Study in a Multinational Oil & Gas Company

With information technology (IT) playing an increasing important role in driving the business, the value of IT investment is often challenged because not all of those investment decisions are made in a reasonable way or aligned with business strategies. IT investment portfolio management (PfM) is an effective way to prioritize and select the right IT projects to invest in, by taking all the project proposals into consideration as a whole, based on their business value, risks, costs, and interrelationships. There are different decision models to prioritise projects, and the Analytic Hierarchy Process (AHP) is one of the most commonly-used methods and is discussed in this master thesis. At the same time, there are IT projects on different levels for a multinational company, from global to local. For instance, many of them are probably proposed by joint ventures on local level. In the oil & gas industry, joint ventures are often formed especially in the area of the upstream (exploration & production). How to involve those projects into the IT investment PfM approach of the parent company is a challenge, because the parent company cannot make the decisions on its own. It needs to prioritize all projects in an adequate way, communicate with JVs and influence them. Also, different control levels on JVs need to be considered. This paper hence attempts to introduce a tailored approach of IT investment PfM for a multinational oil & gas company to address the issues around JVs.

Till Finland over Karungi

kuv., 13 x 17 cm

Can endometrial arylsulfatase A activity predict the onset of endometrial polyps over the years?

PURPOSE: To assess if arylsulfatase A activity (ASA) and sulfatide (SL) concentration in the human endometrium can be predictive of the development of endometrial polyps over the years, since ASA activity reflects the endometrial sensitivity to hormones. METHODS: ASA activity and SL concentration were determined by biochemical procedures on endometrial samples collected between 1990 and 1994 in non-menopausal women. These women underwent a new endometrial sampling following the clinical indication some years after the first endometrial sampling. The histological assessment of the second endometrial specimens found four patients with normal endometrial pattern and 10 patients with one or more endometrial polyps. ASA activity/years elapsed and SL concentration/years elapsed were compared using two tailed Mann-Whitney test for unpaired data between patients with normal pattern and patients with endometrial polyps. RESULTS: Median ASA activities were 2.62 (normal pattern) versus 1.85 (endometrial polyps) nmol hydrolized substrate/min. Median activity/years elapsed is higher in patients with second endometrial sample presenting normal pattern (p=0.006) and median SL concentration/years elapsed does not differ significantly among groups, even if median SL concentration seems to be higher in patients who subsequently developed polyps (1031 µg/g of fresh tissue versus 341,5 µg/g of fresh tissue). CONCLUSIONS: ASA activity can predict the onset of endometrial polyps over the years.

Factors associated with fragility fractures in women over 50 years of age: a population-based household survey

PURPOSE: To analyze the prevalence of and factors associated with fragility fractures in Brazilian women aged 50 years and older. METHODS: This cross-sectional population survey, conducted between May 10 and October 31, 2011, included 622 women aged >50 years living in a city in southeastern Brazil. A questionnaire was administered to each woman by a trained interviewer. The associations between the occurrence of a fragility fracture after age 50 years and sociodemographic data, health-related habits and problems, self-perception of health and evaluation of functional capacity were determined by the χ2 test and Poisson regression using the backward selection criteria. RESULTS: The mean age of the 622 women was 64.1 years. The prevalence of fragility fractures was 10.8%, with 1.8% reporting hip fracture. In the final statistical model, a longer time since menopause (PR 1.03; 95%CI 1.01-1.05; p<0.01) and osteoporosis (PR 1.97; 95%CI 1.27-3.08; p<0.01) were associated with a higher prevalence of fractures. CONCLUSIONS: These findings may provide a better understanding of the risk factors associated with fragility fractures in Brazilian women and emphasize the importance of performing bone densitometry.

Predictive Capability of HPV and Pap Tests in Screening for Cervical Cancer over a Three-Year Follow-up

Purpose To compare the predictive capability of HPV and Pap smear tests for screening pre-cancerous lesions of the cervix over a three-year follow-up, in a population of users of the Brazilian National Health System (SUS). Methods This is a retrospective cohort study of 2,032 women with satisfactory results for Pap smear and HPV tests using second-generation hybrid capture,made in a previous study. We followed them for 36 months with data obtained from medical records, the Cervix Cancer Information System (SISCOLO), and the Mortality Information System (SIM). The outcome was a histological diagnosis of cervical intraepithelial neoplasia grade 2 or more advanced lesions (CIN2ş). We constructed progression curves of the baseline test results for the period, using the Kaplan-Meier method, and estimated sensitivity, specificity, positive and negative predictive value, and positive and negative likelihood ratios for each test. Results A total of 1,440 women had at least one test during follow-up. Progression curves of the baseline test results indicated differences in capability to detect CIN2ş (p < 0.001) with significantly greater capability when both tests were abnormal, followed by only a positive HPV test. The HPV test was more sensitive than the Pap smear (88.7% and 73.6%, respectively; p < 0.05) and had a better negative likelihood ratio (0.13 and 0.30, respectively). Specificity and positive likelihood ratio of the tests were similar. Conclusions These findings corroborate the importance of HPV test as a primary cervical cancer screening.

Application of a non isotropic turbulence model to stable atmospheric flows and dispersion over 3D topography

A non isotropic turbulence model is extended and applied to three dimensional stably stratified flows and dispersion calculations. The model is derived from the algebraic stress model (including wall proximity effects), but it retains the simplicity of the "eddy viscosity" concept of first order models. The "modified k-epsilon" is implemented in a three dimensional numerical code. Once the flow is resolved, the predicted velocity and turbulence fields are interpolated into a second grid and used to solve the concentration equation. To evaluate the model, various steady state numerical solutions are compared with small scale dispersion experiments which were conducted at the wind tunnel of Mitsubishi Heavy Industries, in Japan. Stably stratified flows and plume dispersion over three distinct idealized complex topographies (flat and hilly terrain) are studied. Vertical profiles of velocity and pollutant concentration are shown and discussed. Also, comparisons are made against the results obtained with the standard k-epsilon model.

Creative brand launch in phamaceutical over-the-counter markets – case Burana

The purpose of this study is to examine how a launch of a pharmaceutical over-the-counter sold (OTC) brand can be done by using creative solutions and thus affecting the product life cycle. The study is inspired by a phenomenon called Burana. The Burana brand has been a market leader of OTC painkillers in Finland for the past 27 years. The aim of this study is to “solve the mystery” behind Burana brand’s success by focusing on the launch phase of Burana as an OTC medicine. Farmos Group Ltd (the owner of the brand in 1980´s) had not originally invented the product in question – ibuprofen – and the product had already reached it´s maturity phase, if not even decline from the product life cycle aspect when this phenomenon takes place. This has made the marketing choices, the product launch phase as well as the product management even more interesting from the company point of view as well as from a learning point of view. The methodology in this study is qualitative with a descriptive research strategy, while the study is conducted as a longitudinal single-case study. The methods used in this study have been collecting, analyzing and interpreting the data, which is based on the interviewees’ comments and observed behavior. According to the study, the successful launch phase helped in setting the product one step ahead of the competitors and thus aided the brand leadership and prolonged the product life cycle. Another notable aspect that became clear from the interviews and the documentary of Burana´s launch phase was the innovative idea of involving the people of the distribution chain into the product launch through education. As this study has pointed out, it is not enough to for a company to build an innovative team of employees, but also to offer them an involved and encouraging management. According to the interviews, the support from the company management gave the marketing team the encouragement to be innovative. It can be thus stated that the management of a company has an essential role in fostering the creativity within the company.

Bridge over troubled water - using the CRIS in building Open Access infrastructures

Presentation at the Nordic Perspectives on Open Access and Open Science seminar, Helsinki, October 15, 2013

Three-dimensional supersonic flow over a spike-nosed body of revolution

The unsteady, viscous, supersonic flow over a spike-nosed body of revolution is numerically investigated by solving the Navier-Stokes equations. The time-accurate computations are performed employing an implicit algorithm based on the second-order time-accurate LU-SGS scheme with the incorporation of a subiteration procedure to maintain time accuracy. The characteristics of the flow field for a Mach number of 3.0, Reynolds number of 7.87 x 10(6)/m, and angles of attack of 5 and 10 degrees are described. Self-sustained asymmetric shock wave oscillations were observed in the numerical computations for these angles of attack. The main characteristic of the flow field, as well as its influence on drag coefficient is discussed.

Terpenoid transformations over gold catalysts

Nowadays biomass transformation has a great potential for the synthesis of value-added compounds with a wide range of applications. Terpenoids, extracted from biomass, are inexpensive and renewable raw materials which often have a biological activity and are widely used as important organic platform molecules in the development of new medicines as well as in the synthesis of fine chemicals and intermediates. At the same time, special attention is devoted to the application of gold catalysts to fine chemical synthesis due to their outstanding activity and/or selectivity for transformations of complex organic compounds. Conversion of renewable terpenoids in the presence of gold nanoparticles is one of the new and promising directions in the transformation of biomass to valuable chemicals. In the doctoral thesis, different kinds of natural terpenoids, such as α-pinene, myrtenol and carvone were selected as starting materials. Gold catalysts were utilized for the promising routes of these compounds transformation. Investigation of selective α-pinene isomerization to camphene, which is an important step in an industrial process towards the synthesis of camphor as well as other valuable substrates for the pharmaceutical industry, was performed. A high activity of heterogeneous gold catalysts in the Wagner-Meerwein rearrangement was demonstrated for the first time. Gold on alumina carrier was found to reach the α-pinene isomerization conversion up to 99.9% and the selectivity of 60-80%, thus making this catalyst very promising from an industrial viewpoint. A detailed investigation of kinetic regularities including catalyst deactivation during the reaction was performed. The one-pot terpene alcohol amination, which is a promising approach to the synthesis of valuable complex amines having specific physiological properties, was investigated. The general regularities of the one-pot natural myrtenol amination in the presence of gold catalysts as well as a correlation between catalytic activity, catalyst redox treatment and the support nature were obtained. Catalytic activity and product distribution were shown to be strongly dependent on the support properties, namely acidity and basicity. The gold-zirconia (Au/ZrO2) catalyst pretreated under oxidizing atmosphere was observed to be rather active, resulting in the total conversion of myrtenol and the selectivity to the corresponding amine of about 53%. The reaction kinetics was modelled based on the mechanistic considerations with the catalyst deactivation step incorporated in the mechanism. Carvone hydrogenation over a gold catalyst was studied with the general idea of investigating both the activity of gold catalysts in competitive hydrogenation of different functional groups and developing an approach to the synthesis of valuable carvone derivatives. Gold was found to promote stereo- and chemoselective carvone hydrogenation to dihydrocarvone with a predominant formation of the trans-isomer, which generally is a novel synthetic method for an industrially valuable dihydrocarvone. The solvent effect on the catalytic activity as well as on the ratio between trans- and cis-dihydrocarvone was evaluated.

Bio-ethanol valorization towards C4s including 1-butanol over metal modified alumina and zeolite catalysts

Bio-ethanol has been used as a fuel additive in modern society aimed at reducing CO2-emissions and dependence on oil. However, ethanol is unsuitable as fuel supplement in higher proportions due to its physico-chemical properties. One option to counteract the negative effects is to upgrade ethanol in a continuous fixed bed reactor to more valuable C4 products such as 1-butanol providing chemical similarity with traditional gasoline components. Bio-ethanol based valorization products also have other end-uses than just fuel additives. E.g. 1-butanol and ethyl acetate are well characterised industrial solvents and platform chemicals providing greener alternatives. The modern approach is to apply heterogeneous catalysts in the investigated reactions. The research was concentrated on aluminium oxide (Al2O3) and zeolites that were used as catalysts and catalyst supports. The metals supported (Cu, Ni, Co) gave very different product profiles and, thus, a profound view of different catalyst preparation methods and characterisation techniques was necessary. Additionally, acidity and basicity of the catalyst surface have an important role in determining the product profile. It was observed that ordinary determination of acid strength was not enough to explain all the phenomena e.g. the reaction mechanism. One of the main findings of the thesis is based on the catalytically active site which originates from crystallite structure. As a consequence, the overall evaluation of different by-products and intermediates was carried out by combining the information. Further kinetic analysis was carried out on metal (Cu, Ni, Co) supported self-prepared alumina catalysts. The thesis gives information for further catalyst developments aimed to scale-up towards industrially feasible operations.

Early growth of common bean cropped over ruzigrass residues

Ruzigrass (Brachiaria ruziziensis, syn. Urochloa ruziziensis) is used as a cover crop in tropical regions because it has a high yield potential, is widely adapted and has a vigorous root system. However, it may affect early growth of the next crop due to allelopathy and competition for soil nitrate. A greenhouse experiment was conducted in glass-walled pots with soil to determine the effect of ruzigrass residues on the initial growth and mineral nutrition of common bean (Phaseolus vulgaris). Ruzigrass was grown in the pots for 50 days and chemically desiccated. Then, common bean was grown: without ruzigrass residues; with ruzigrass shoots placed on the soil surface; with ruzigrass roots left in the soil; and with ruzigrass shoots and roots left undisturbed. Root growth of common bean was decreased by ruzigrass residues, but shoot biomass was not affected when it was grown in the presence of ruzigrass shoots or roots alone. In pots where ruzigrass residues were undisturbed, common bean biomass yield was decreased. Nitrogen concentration in common bean shoot was not affected by ruzigrass shoot on the soil surface, an evidence that the observed decrease in common bean growth probably was due to allelopathic effects rather than competition for nitrogen.