952 resultados para Natural Science Disciplines
Resumo:
Tese de Doutoramento em Biologia apresentada à Faculdade de Ciências da Universidade do Porto, 2015.
Resumo:
Copyright © Springer Science+Business Media Dordrecht 2014.
Flavoured versus natural waters: macromineral (Ca, Mg, K, Na) and micromineral (Fe, Cu, Zn) contents
Resumo:
Macro (Ca, Mg, K, Na) and micromineral (Fe, Zn, Cu) composition of 39 waters was analysed. Determinations were made by atomic flame spectrophotometry for macrominerals and electrothermic atomisation in graphite furnace for microminerals. Mineral contents of still or sparkling natural waters (without flavours) changed from brand to brand. Mann–Whitney test was used to search for significant differences between flavoured and natural waters. For that, the concentration of each mineral was compared to the presence of flavours, preservatives, acidifying agents, fruit juice and/or sweeteners, according to the labelled composition. The statistical study demonstrated that flavoured waters generally have increased contents of K, Na, Fe and Cu. The added preservatives also led to significant differences in the mineral composition. Acidifying agents and fruit juice can also be correlated to the increase of Mg, K, Na, Fe and Cu. Sweeteners do not provide any significant difference in Ca, Mg, Fe and Zn contents.
Resumo:
This work reports a relatively rapid procedure for the forecasting of the remediation time (RT) of sandy soils contaminated with cyclohexane using vapour extraction. The RT estimated through the mathematical fitting of experimental results was compared with that of real soils. The main objectives were: (i) to predict the RT of soils with natural organic matter (NOM) and water contents different from those used in experiments; and (ii) to analyse the time and efficiency of remediation, and the distribution of contaminants into the soil matrix after the remediation process, according to the soil contents of: (ii1) NOM; and (ii2) water. For sandy soils with negligible clay contents, artificially contaminated with cyclohexane before vapour extraction, it was concluded that: (i) if the NOM and water contents belonged to the range of the prepared soils, the RT of real soils could be predicted with relative differences not higher than 12%; (ii1) the increase of NOM content from 0% to 7.5% increased the RT (1.8–13 h) and decreased the remediation efficiency (RE) (99–90%) and (ii2) the increase of soil water content from 0% to 6% increased the RT (1.8–4.9 h) and decreased the RE (99–97%). NOM increases the monolayer capacity leading to a higher sorption into the solid phase. Increasing of soil water content reduces the mass transfer coefficient between phases. Concluding, NOM and water contents influence negatively the remediation process, turning it less efficient and more time consuming, and consequently more expensive.
Resumo:
Abstract This work reports the analysis of the efficiency and time of soil remediation using vapour extraction as well as provides comparison of results using both, prepared and real soils. The main objectives were: (i) to analyse the efficiency and time of remediation according to the water and natural organic matter content of the soil; and (ii) to assess if a previous study, performed using prepared soils, could help to preview the process viability in real conditions. For sandy soils with negligible clay content, artificially contaminated with cyclohexane before vapour extraction, it was concluded that (i) the increase of soil water content and mainly of natural organic matter content influenced negatively the remediation process, making it less efficient, more time consuming, and consequently more expensive; and (ii) a previous study using prepared soils of similar characteristics has proven helpful for previewing the process viability in real conditions.
Resumo:
In this work three natural waste materials containing chitin were used as adsorbents for textile dyestuffs, namely the Anodonta (Anodonta cygnea) shell, the Sepia (Sepia officinalis) and the Squid (Loligo vulgaris) pens. The selected dyestuffs were the Cibacron green T3G-E (CI reactive green 12), and the Solophenyl green BLE 155% (CI direct green 26), both from CIBA, commonly used in cellulosic fibres dyeing, the most used fibres in the textile industry. Batch equilibrium studies showed that the materials’ adsorption capacities increase after a simple and inexpensive chemical treatment, which increases their porosity and chitin relative content. Kinetic studies suggested the existence of a high internal resistance in both systems. Fixed bed column experiments performed showed an improvement in adsorbents’ behaviour after chemical treatment. However, in the column experiments, the biodegradation was the main mechanism of dyestuff removal, allowing the materials’ bioregeneration. The adsorption was strongly reduced by the pore clogging effect of the biomass. The deproteinised Squid pen (grain size 0.500–1.41 mm) is the adsorbent with highest adsorption capacity (0.27 and 0.037 g/g, respectively, for the reactive and direct dyestuffs, at 20ºC), followed by the demineralised Sepia pen and Anodonta shell, behaving like pure chitin in all experiments, but showing inferior performances than the granular activated carbon tested in the column experiments.
Resumo:
Adhesive bonding has become more efficient in the last few decades due to the adhesives developments, granting higher strength and ductility. On the other hand, natural fibre composites have recently gained interest due to the low cost and density. It is therefore essential to predict the fracture behavior of joints between these materials, to assess the feasibility of joining or repairing with adhesives. In this work, the tensile fracture toughness (Gc n) of adhesive joints between natural fibre composites is studied, by bonding with a ductile adhesive and co-curing. Conventional methods to obtain Gc n are used for the co-cured specimens, while for the adhesive within the bonded joint, the J-integral is considered. For the J-integral calculation, an optical measurement method is developed for the evaluation of the crack tip opening and adherends rotation at the crack tip during the test, supported by a Matlab sub-routine for the automated extraction of these quantities. As output of this work, an optical method that allows an easier and quicker extraction of the parameters to obtain Gc n than the available methods is proposed (by the J-integral technique), and the fracture behaviour in tension of bonded and co-cured joints in jute-reinforced natural fibre composites is also provided for the subsequent strength prediction. Additionally, for the adhesively- bonded joints, the tensile cohesive law of the adhesive is derived by the direct method.
Resumo:
Thesis presented at the Faculdade de Ciências e Tecnologia, Universidade Nova de Lisboa, to obtain a Master degree in Conservation and Restoration,Specialization in Textiles
Resumo:
Dissertation to obtain a Master Degree in Biotechnology
Resumo:
Biosensors have opened new horizons in biomedical analysis, by ensuring increased assay speed and flexibility, and allowing point-of-care applications, multi-target analyses, automation and reduced costs of testing. This has been a result of many studies merging nanotechnology with biochemistry over the years, thereby enabling the creation of more suitable environments to biological receptors and their substitution by synthetic analogue materials. Sol-gel chemistry, among other materials, is deeply involved in this process. Sol-gel processing allows the immobilization of organic molecules, biomacromolecules and cells maintaining their properties and activities, permitting their integration into different transduction devices, of electrochemical or optical nature, for single or multiple analyses. Sol-gel also allows to the production of synthetic materials mimicking the activity of natural receptors, while bringing advantages, mostly in terms of cost and stability. Moreover, the biocompatibility of sol-gel materials structures of biological nature allowed the use of these materials in emerging in vivo applications. In this chapter, biosensors for biomedical applications based on sol-gel derived composites are presented, compared and described, along with current emerging applications in vivo, concerning drug delivery or biomaterials. Sol-gel materials are shown as a promising tool for current, emerging and future medical applications. - See more at: http://www.eurekaselect.com/127191/article#sthash.iPqqyhox.dpuf
Resumo:
Nowadays natural ventilation has gained prominence because its correct use can reduce energy consumption for cooling systems and improve thermal comfort among users. In this paper, we report on the modelling initiative, based on the wind tunnel tests that were carried out for the determination of the influence of natural ventilation in buildings. Indeed, the renewal of air in a closed environment without using an air conditioning system with mechanical elements can lead to energy savings and, in addition, provide air quality.The wind tunnel tests were carried out by varying the positioning of six ventilation modules in the façade system configuration. The modules were positioned below the window-sill (ventilated window-sill) as well as separately above and below the façade. The wind speed measurements were taken inside and outside the model for the different façades configurations to evaluate the best performance in relation to natural ventilation. The results supported the positioning of the six ventilation modules below the window-sill, forming a â ventilated window-sillâ as the most effective natural ventilation solution.
Resumo:
Natural deep eutectic solvents (NADES) have shown to be promising sustainable media for a wide range of applications. Nonetheless, very limited data is available on the properties of these solvents. A more comprehensive body of data on NADES is required for a deeper understanding of these solvents at molecular level, which will undoubtedly foster the development of new applications. NADES based on choline chloride, organic acids, amino acids and sugars were prepared, and their density, thermal behavior, conductivity and polarity were assessed, for different NADES compositions. The NADES studied can be stable up to 170 °C, depending on their composition. The thermal characterization revealed that all the NADES are glass formers and some, after water removal, exhibit crystallinity. The morphological characterization of the crystallizable materials was performed using polarized optical microscopy which also provided evidence of homogeneity/phase separation. The conductivity of the NADES was also assessed from 0 to 40 °C. The more polar, organic acid-based NADES presented the highest conductivities. The conductivity dependence on temperature was well described by the Vogelâ Fulcherâ Tammann equation for some of the NADES studied.
Resumo:
The occurrence of anaerobic oxidation of methane (AOM) and trace methane oxidation (TMO) was investigated in a freshwater natural gas source. Sediment samples were taken and analyzed for potential electron acceptors coupled to AOM. Long-term incubations with 13C-labeled CH4 (13CH4) and different electron acceptors showed that both AOM and TMO occurred. In most conditions, 13C-labeled CO2 (13CO2) simultaneously increased with methane formation, which is typical for TMO. In the presence of nitrate, neither methane formation nor methane oxidation occurred. Net AOM was measured only with sulfate as electron acceptor. Here, sulfide production occurred simultaneously with 13CO2 production and no methanogenesis occurred, excluding TMO as a possible source for 13CO2 production from 13CH4. Archaeal 16S rRNA gene analysis showed the highest presence of ANME-2a/b (ANaerobic MEthane oxidizing archaea) and AAA (AOM Associated Archaea) sequences in the incubations with methane and sulfate as compared with only methane addition. Higher abundance of ANME-2a/b in incubations with methane and sulfate as compared with only sulfate addition was shown by qPCR analysis. Bacterial 16S rRNA gene analysis showed the presence of sulfate-reducing bacteria belonging to SEEP-SRB1. This is the first report that explicitly shows that AOM is associated with sulfate reduction in an enrichment culture of ANME-2a/b and AAA methanotrophs and SEEP-SRB1 sulfate reducers from a low-saline environment.
Resumo:
Las didácticas específicas de las ciencias naturales revelan diferentes problemáticas en su enseñanza y aprendizaje en los diferentes niveles del sistema educativo. En particular, en las clases de ciencias la interacción discursiva docente alumnos adquiere relevancia, ya que el proceso de comunicación del conocimiento es uno de los pilares didácticos, junto a la trasposición del mismo. Especificamente, en este proyecto nos abocamos a aquellas intervenciones de docentes y alumnos que se relacionan con la construcción del conocimiento biológico y químico. El proyecto se enmarca en una actual linea de trabajo que indaga sobre las dificultades en los abordajes del conocimiento científico en las aulas, las características del discurso entre docentes y alumnos, las habilidades y dificultades en la comprensión de los enunciados de problemas y las características de los textos que se utilizan en las clases. Se focaliza este estudio en casos que intentan dar respuesta a tres temáticas, agrupadas en un conjunto de situaciones de investigación relacionadas con la interacción discursiva docente-alumno, retomando el rol del docente al hablar, guiar o diseñar las situaciones de referencia para el aprendizaje de los alumnos. Los casos son: 1- En cuanto a las concepciones sobre diversidad biológica en estudiantes de escuela secundaria y en textos académicos, atendemos a cómo la escuela presenta los contenidos ecológicos como un conjunto de dogmas y conceptos estáticos. Además suelen simplificarse conceptualmente y presentarse poco actualizados. Es por ello que se planea estudiar las concepciones y actitudes de los alumnos de secundaria sobre la biodiversidad, cómo estas dificultan su comprensión y los textos usados en relación a la promoción de la transposición didáctica. 2- En relación a cómo se elabora el patrón temático del tema célula en clases de Biología, se analizarán las diferentes estrategias de significados y de desarrollo temático, que se emplean en la comunicación aulica. Se intentará establecer si hay cambios en el desarrollo temático a medida que se avanza en la escolaridad. Esto es porque se puede apreciar que muchos de los problemas de aprendizaje del alumnado se deben a un desconocimiento tanto del patrón temático como del patrón estructural de la ciencia, siendo preciso evocar los patrones temáticos que se quieren utilizar, para construir un conocimiento compartido. 3-Finalmente, en los enunciados de problemas de Química, se analizarán las dificultades de comprensión lectora de alumnos de Ingeniería. Los docentes frecuentemente atribuyen los problemas a deficiencias en la instrucción recibida, sin considerarse los conocimientos previos del alumno, los obstáculos conceptuales originados en el tema, las deficiencias en la habilidad lectora, el tipo textual predominante en la consigna, el formato en el que se escribió la consigna y los factores personales, etc., siendo que la comprensión del enunciado de una consigna de trabajo condiciona fuertemente la posibilidad de su resolución. Los tres casos utilizarán metodologías cualitaritas que incluyan análisis de contenido en discursos orales y escritos. Los datos se registrarán desde observación no participante, registro etnográfico y con grabaciones de audio. Se espera contribuir al conocimiento, realizando aportes a la formación docente en tanto las estrategias discursivas que se emplean en el aula, en forma oral y en la escrita, conocer concepciones que dificultan o favoren la construcción del conocimiento científico, entre otras. Los productos de estos estudios estarán integrados por nuevos desarrollos para la formación docente, publicaciones científicas de impacto nacional e internacional, presentaciones a congresos, materiales didácticos y divulgativos, dictado de seminarios y/o cursos, redacción de informes a las escuelas intervinientes.. The specific Natural Sciences didactics show different problems in teaching and learning along the school system. In particular, the discourse used to communicate knowledge in Science lessons becomes important. With this project we will focus on the teachers and students actions regarding the construction of biological and chemical knowledge. This project attempts to answer these issues and brings together a range of research situations related to teacher-student interaction, through discourse, taking up the role of the teacher to speak, to plan and to guide student learning. We will study the ideas and attitudes of high school students about biodiversity that make difficult its understanding and the textbooks used in relation to promotion of the didactic transposition. In addition, regarding how the thematic pattern in biology classes is costructed, it will be analyzed the different meaning and thematic development strategies that are used in communication. We will attempt to establish whether there are any changes in the thematic development throughout high school education. Finally, we will analyze the reading comprehension problems in engineering students. Teachers frequently attribute these issues to deficiencies in prior education, without considering the students background, the conceptual obstacles arising in the field, the format in which the prompt is written, personal factors, etc., keeping in mind that the outcome of an activity is strictly dependant con the prompt understanding. We expect to make contributions to the teacher education in both the discourse strategies used in the classroom, orally and in writing, to learn about the conceptions that hinder or favor the knowledge construction, among others. The products of this study will be national and international impact scientific publications, conference presentations, popular science publications, seminars courses and reports to the schools involeved.
Resumo:
pt.1-2 (1830-1832)