The Unemployment Benefit System: a Redistributive or an Insurance Institution?

[eng] In this paper we analyze how the composition of labor taxation affects unemployment in a unionized economy with capital accumulation and an unemployment benefit system. We show that if the unemployment benefit system is gross Bismarckian then the unemployment rate is reduced if wage taxes are decreased (and thus payroll taxes are increased). However, if the unemployment benefit system is net Bismarckian then the unemployment rate does not depend on how the system is financed. Besides, in a Beveridgean system the labor tax composition does not affect the unemployment rate if and only if the unemployed do not pay taxes and the employed pay a constant marginal tax rate. We also analyze when an unemployment benefit budget-balanced rule makes the economy to have a hysteresis process.

Development of a GPS-Based Sign Inventory Tool for Iowa’s Statewide Management System, May 2011

This report is on state-of-the-art research efforts specific to infrastructure inventory/data collection with sign inventory as a case study. The development of an agency-wide sign inventory is based on feature inventory and location information. Specific to location, a quick and simple location acquisition tool is critical to tying assets to an accurate location-referencing system. This research effort provides a contrast between legacy referencing systems (route and milepost) and global positioning system- (GPS-) based techniques (latitude and longitude) integrated into a geographic information system (GIS) database. A summary comparison of field accuracies using a variety of consumer grade devices is also provided. This research, and the data collection tools developed, are critical in supporting the Iowa Department of Transportation (DOT) Statewide Sign Management System development effort. For the last two years, a Task Force has embarked on a comprehensive effort to develop a sign management system to improve sign quality, as well as to manage all aspects of signage, from request, ordering, fabricating, installing, maintaining, and ultimately removing, and to provide the ability to budget for these key assets on a statewide basis. This effort supported the development of a sign inventory tool and is the beginning of the development of a sign management system to support the Iowa DOT efforts in the consistent, cost effective, and objective decision making process when it comes to signs and their maintenance.

The adaptive function of melanin-based coloration in the tawny owl (Strix aluco) ; the proximate role of the melanocortin system

Colour polymorphism is common in wild population. One of the main questioning of evolutionary biologists is to understand how different colour variants could have evolved and be maintained in fluctuating environments, a selective process that forces individuals to constantly adapt their strategies in order to survive. This issue is particularly true for traits that are genetically inherited. Natural selection erodes genotypes with lowest fitness (less adapted), reducing in turn global genetic variation within population. In this context, the study of the evolution and maintenance of melanin- based coloration is relevant since inter-individual variation in the deposition of these pigments is common in animal and plant kingdoms and is under strong genetic control. In this thesis, I focus on the specific case of the tawny owl (Strix aluco), a species displaying continuous variation in reddish pheomelanin-based coloration. Interestingly, empirical studies highlighted covariations between melanin-based coloration and important behavioural, physiological and life history traits. Recently, a genetic model pointed out the melanocortin system and their pleiotropic effects as a potential regulator of these covariations. Accordingly, this PhD thesis further investigates colour-specific behavioural, physiological, or life history strategies, while examining the proximate mechanisms underlying these reaction norms. We found that differently coloured tawny owls differently resolve fundamental trade-off between offspring number and quality (Chapter 1), light melanic individuals producing many low- quality offspring and dark, melanic ones producing few high-quality offspring. These reproductive strategies are likely to induce alternative physiological constraints. Indeed, we demonstrated that light melanic individuals produced higher levels of reactive oxygen species (ROS, Chapter 2), but also expressed higher levels of antioxidant (GSH, Chapters 2 & 3). Interestingly, we showed that light melanic breeding females could modulate their POMC prohormone levels according to the environmental conditions, while dark reddish ones produced constant levels of this prohormone {Chapter 4). Finally, we highlighted colour-specific patterns of prohormone convertase 1 (PCI) gene expression (Chapter 5), an enzyme responsible for POMC prohormone processing to ACTH and a- MSH, for instance. Altogether, these results provide strong evidence of colour-specific strategies, light and melanic tawny owls better coping with stressful and relaxed environments, respectively. Variation in melanin-based coloration is likely to be maintained by the heterogeneity of our study area and strong environmental stochasticity within and between years, these process favouring differently coloured tawny owls at different periods of time. From a proximate point of view, this PhD thesis supports the hypothesis that covariations between phenotypic traits and melanin-based coloration stems from the melanocortin system, especially the fundamental role of POMC gene expression and its processing to melanocortin peptides. - Le polymorphisme de couleur est une variation phénotypique très fréquente dans la nature. En biologie évolutive, une des problématiques clés est donc de comprendre comment différent morphes de couleur peuvent être apparus et maintenus au cours du temps dans des environnements aussi variables que les nôtres, surtout que ces fluctuations forcent ces morphes à s'adapter constamment pour assurer leur survie. Cette thématique est particulièrement réelle lorsque les variations phénotypiques sont héréditaires et donc sous forte influence génétique. La sélection naturelle a en effet le pouvoir d'éroder rapidement la variation génétique en éliminant les génotypes mal adaptés. Dans ce sens, l'étude de l'évolution, et de la maintenance de la coloration mélanique est donc tout à fait pertinente car la variation de coloration entre individus est très répandue à travers les règnes animal et végétal et sous forte influence génétique. Dans cette thèse, je me suis concentré sur le cas spécifique de la chouette hulotte (Strix aluco), une espèce présentant une variation continue dans la déposition de pigments pheomélaniques roux. De précédentes études ont déjà montré que cette variation de coloration était associée avec des variations de traits comportementaux, physiologiques ou d'histoire de vie. Récemment, une étude a souligné l'importance du système des mélanocortines et de leurs effets pléiotropes dans la régulation de ces covariations. En conséquence, cette thèse de doctoral a pour but d'étudier un peu plus les stratégies comportementales, physiologiques ou d'histoire de vie spécifiques à chaque morphe de couleur, tout en examinant un peu plus les mécanismes proximaux potentiellement à la base de ces normes de réactions. Nous constatons tout d'abord que les morphes de couleurs étaient associés à différentes stratégies dans la résolution de compromis telle que la production de beaucoup de jeunes ou des jeunes de qualité (Chapitre 1). Les morphes gris (dit peu mélaniques) ont tendance à produire beaucoup de jeunes mains de moindre qualité, alors que les morphes roux (dit fortement mélaniques) produisent moins de jeunes mais de meilleure qualité. Ces stratégies sont susceptibles alors d'induire certaines contraintes physiologiques. Par exemple, nous montrons que les morphes gris produisent plus de dérivés réactifs de l'oxygène (ROS, Chapitre 2), mais aussi plus d'antioxydants (GSH, Chapitres 2 & 3). Nous montrons ensuite que les femelles grises ont une plus grande capacité à moduler leur niveau de POMC prohormone dans le sang en fonction des conditions environnementales, alors que les femelles rousses gardent un niveau constant (Chapitre 4). Finalement, nous démontrons que les patterns d'expression du gène codant pour la prohormone convertase 1 varient chez des jeunes issus de parents gris ou roux (Chapitre 5). Ceci est particulièrement intéressant car cette enzyme permet de scinder la POMC prohormone en plusieurs peptides importants tels que l'ACTH ou l'a-MSH. En conclusion, ces résultats démontrent qu'il y a bel et bien des stratégies évolutives différentes entre les morphes de couleurs, les chouettes hulottes grises et rousses étant respectivement plus adaptés à des environnements stressants ou favorables. L'hétérogénéité de notre zone d'étude et la stochasticité environnementale qui caractérise ses habitats pourraient donc agir comme une source de sélection temporelle, laquelle favoriserait les différents morphes de couleurs à diverses périodes. D'un point de vue plus proximale maintenant, cette thèse de doctorat soutient l'hypothèse que les covariations observées entre la coloration mélanique et des traits phénotypiques importants sont modulées par les effets pléiotropes du système des mélanocortines, et met en avant le rôle prépondérant que pourrait jouer l'expression du gène POMC et sa post traduction en mélanocortines.

Does human capital stimulate investment in physical capital?: Evidence from a cost system framework

The direct effect of human capital on economic growth has been widely analysed in the economic literature. This paper, however, focuses on its indirect effect as a stimulus for private investment in physical capital. The methodological framework used is the duality theory, estimating a cost system aggregated with human capital. Empirical evidence is given for Spain for the period 1980-2000. We provide evidence on the indirect effect of human capital in making private capital investment more attractive. Among the main explanations forthis process, we observe that higher worker skill levels enable higher returns to be extracted from investment in physical capital.

Constructability in the Bridge Design Process, HR-320, 1991

In the United States many bridge structures have been designed without consideration for their unique construction problems. Many problems could have been avoided if construction knowledge and experience was utilized in the design process. A systematic process is needed to create and capture construction knowledge for use in the design process. This study was conducted to develop a system to capture construction considerations from field people and incorporate it into a knowledge-base for use by the bridge designers. This report presents the results of this study. As a part of this study a microcomputer-based constructability system has been developed. The system is a user-friendly microcomputer database which codifies construction knowledge, provides easy access to specifications, and provides simple design computation checks for the designer. A structure for the final database was developed and used in the prototype system. A process for collecting, developing and maintaining the database is presented and explained. The study involved a constructability survey, interviews with designers and constructors, and visits to construction sites to collect constuctability concepts. The report describes the development of the constructability system and addresses the future needs for the Iowa Department of Transportation to make the system operational. A user's manual for the system is included along with the report.

Development of a New Process for Determining Design Year Traffic Demands, TR-528, 2007

Researchers should continuously ask how to improve the models we rely on to make financial decisions in terms of the planning, design, construction, and maintenance of roadways. This project presents an alternative tool that will supplement local decision making but maintain a full appreciation of the complexity and sophistication of today’s regional model and local traffic impact study methodologies. This alternative method is tailored to the desires of local agencies, which requested a better, faster, and easier way to evaluate land uses and their impact on future traffic demands at the sub-area or project corridor levels. A particular emphasis was placed on scenario planning for currently undeveloped areas. The scenario planning tool was developed using actual land use and roadway information for the communities of Johnston and West Des Moines, Iowa. Both communities used the output from this process to make regular decisions regarding infrastructure investment, design, and land use planning. The City of Johnston case study included forecasting future traffic for the western portion of the city within a 2,600-acre area, which included 42 intersections. The City of West Des Moines case study included forecasting future traffic for the city’s western growth area covering over 30,000 acres and 331 intersections. Both studies included forecasting a.m. and p.m. peak-hour traffic volumes based upon a variety of different land use scenarios. The tool developed took goegraphic information system (GIS)-based parcel and roadway information, converted the data into a graphical spreadsheet tool, allowed the user to conduct trip generation, distribution, and assignment, and then to automatically convert the data into a Synchro roadway network which allows for capacity analysis and visualization. The operational delay outputs were converted back into a GIS thematic format for contrast and further scenario planning. This project has laid the groundwork for improving both planning and civil transportation decision making at the sub-regional, super-project level.

Microcontroller-driven fluid-injection system for atomic force microscopy.

We present a programmable microcontroller-driven injection system for the exchange of imaging medium during atomic force microscopy. Using this low-noise system, high-resolution imaging can be performed during this process of injection without disturbance. This latter circumstance was exemplified by the online imaging of conformational changes in DNA molecules during the injection of anticancer drug into the fluid chamber.

Rapid, simple and high yield production of recombinant proteins in mammalian cells using a versatile episomal system.

Many research projects in life sciences require purified biologically active recombinant protein. In addition, different formats of a given protein may be needed at different steps of experimental studies. Thus, the number of protein variants to be expressed and purified in short periods of time can expand very quickly. We have therefore developed a rapid and flexible expression system based on described episomal vector replication to generate semi-stable cell pools that secrete recombinant proteins. We cultured these pools in serum-containing medium to avoid time-consuming adaptation of cells to serum-free conditions, maintain cell viability and reuse the cultures for multiple rounds of protein production. As such, an efficient single step affinity process to purify recombinant proteins from serum-containing medium was optimized. Furthermore, a series of multi-cistronic vectors were designed to enable simultaneous expression of proteins and their biotinylation in vivo as well as fast selection of protein-expressing cell pools. Combining these improved procedures and innovative steps, exemplified with seven cytokines and cytokine receptors, we were able to produce biologically active recombinant endotoxin free protein at the milligram scale in 4-6weeks from molecular cloning to protein purification.

Distal locking of femoral nails: evaluation of a new radiation-independent targeting system.

OBJECTIVES: The purpose of this study was to assess the effectiveness of a novel radiation-independent aiming device for distal locking of intramedullary nails in a human cadaver model. METHODS: A new targeting system was used in 25 intact human cadaver femora for the distal locking procedure after insertion of an intramedullary nail. The number of successful screw placements and the time needed for this locking procedure were recorded. The accuracy of the aiming process was evaluated by computed tomography. RESULTS: The duration of the distal locking process was 8.0 ± 1.8 minutes (mean ± SD; range, 4-11 minutes). None of the screw placements required fluoroscopic guidance. Computed tomography revealed high accuracy of the locking process. The incidence angle (α) of the locking screws through the distal locking holes of the nail was 86.8° ± 5.0° (mean ± SD; range, 80°-96°). Targeting failed in 1 static locking screw because of a material defect in the drilling sleeve. CONCLUSIONS: This cadaver study indicated that an aiming arm-based targeting device is highly reliable and accurate. The promising results suggest that it will help to decrease radiation exposure compared with the traditional "free-hand technique."

Measuring potentially avoidable hospital readmissions.

The objectives of this study were to develop a computerized method to screen for potentially avoidable hospital readmissions using routinely collected data and a prediction model to adjust rates for case mix. We studied hospital information system data of a random sample of 3,474 inpatients discharged alive in 1997 from a university hospital and medical records of those (1,115) readmitted within 1 year. The gold standard was set on the basis of the hospital data and medical records: all readmissions were classified as foreseen readmissions, unforeseen readmissions for a new affection, or unforeseen readmissions for a previously known affection. The latter category was submitted to a systematic medical record review to identify the main cause of readmission. Potentially avoidable readmissions were defined as a subgroup of unforeseen readmissions for a previously known affection occurring within an appropriate interval, set to maximize the chance of detecting avoidable readmissions. The computerized screening algorithm was strictly based on routine statistics: diagnosis and procedures coding and admission mode. The prediction was based on a Poisson regression model. There were 454 (13.1%) unforeseen readmissions for a previously known affection within 1 year. Fifty-nine readmissions (1.7%) were judged avoidable, most of them occurring within 1 month, which was the interval used to define potentially avoidable readmissions (n = 174, 5.0%). The intra-sample sensitivity and specificity of the screening algorithm both reached approximately 96%. Higher risk for potentially avoidable readmission was associated with previous hospitalizations, high comorbidity index, and long length of stay; lower risk was associated with surgery and delivery. The model offers satisfactory predictive performance and a good medical plausibility. The proposed measure could be used as an indicator of inpatient care outcome. However, the instrument should be validated using other sets of data from various hospitals.

Electronic Construction Collaboration System – Final Phase, SPR RB02-008, 2014

This phase of the research project involved two major efforts: (1) Complete the implementation of AEC-Sync (formerly known as Attolist) on the Iowa Falls Arch Bridge project and (2) develop a web-based project management system (WPMS) for projects under $10 million. For the first major effort, AEC-Sync was provided for the Iowa Department of Transportation (DOT) in a software as a service agreement, allowing the Iowa DOT to rapidly implement the solution with modest effort. During the 2010 fiscal year, the research team was able to help with the implementation process for the solution. The research team also collected feedback from the Broadway Viaduct project team members before the start of the project and implementation of the solution. For the 2011 fiscal year, the research team collected the post-project surveys from the Broadway Viaduct project members and compared them to the pre-project survey results. The result of the AEC-Sync implementation in the Broadway Viaduct project was a positive one. The project members were satisfied with the performance of AEC-Sync and how it facilitated document management and transparency. In addition, the research team distributed, collected, and analyzed the pre-project surveys for the Iowa Falls Arch Bridge project. During the 2012 fiscal year, the research team analyzed the post-project surveys for the Iowa Falls Arch Bridge project AEC-Sync implementation and found a positive outcome when compared to the pre-project surveys. The second major effort for this project involved the identification and implementation of a WPMS solution for smaller bridge and highway projects. During the 2011 fiscal year, Microsoft SharePoint was selected to be implemented on these smaller highway projects. In this year, workflows for the shop/working drawings for the smaller highway projects specified in Section 1105 of the Iowa DOT Specifications were developed. These workflows will serve as the guide for the development of the SharePoint pages. In order to implement the Microsoft SharePoint pages, the effort of an integrated team proved to be vital because it brought together the expertise required from researchers, programmers, and webpage developers to develop the SharePoint pages.

Automatic Recognition of Leaves by Shape Detection Pre-Processing with Ica

In this work we present a simulation of a recognition process with perimeter characterization of a simple plant leaves as a unique discriminating parameter. Data coding allowing for independence of leaves size and orientation may penalize performance recognition for some varieties. Border description sequences are then used to characterize the leaves. Independent Component Analysis (ICA) is then applied in order to study which is the best number of components to be considered for the classification task, implemented by means of an Artificial Neural Network (ANN). Obtained results with ICA as a pre-processing tool are satisfactory, and compared with some references our system improves the recognition success up to 80.8% depending on the number of considered independent components.

MOLECULAR MECHANISMS OF A ROOT SYSTEM TO SOIL ADAPTATION

Contrairement aux animaux, les plantes sont des organismes sessiles qui ne possèdent pas de mécanismes de fuite quand les conditions environnementales ne sont plus optimales. Les plantes sont physiquement ancrées à l'endroit où elles ont germées et aux conditions environnementales qui parfois peuvent être extrêmes. Les possibilités d'acclimatation de différentes espèces, parfois même de groupes de plantes au sein d'une même espèce, peuvent varier mais repose sur une adaptation génétique de la plante. L'adaptation est un long processus qui repose sur l'apparition spontanée de mutations génétiques, leur mise à l'épreuve face aux conditions environnementales, et dans le cas où la mutation a un impact positif sur la survie dans cet habitat particulier, elle sera maintenue dans une population donnée de plantes. De telles populations, appelées écotypes, sont le matériel de départ pour la découverte de gènes qui induisent un bénéfice pour la plante dans un environnement donné. La plante la plus étudiée en biologie moléculaire est Arabidopsis thaliana, l'arabette des prés. Dans une étude précédente, les racines d'écotypes naturels d'Arabidopsis ont été comparées et un écotype, Uk-1, avait le système racinaire le plus particulier. Cet écotype possède des racines beaucoup plus courtes et plus ramifiées que tous les autres écotypes. Des analyses plus poussées ont montré qu'une seule mutation dans un gène était la cause de ce phénotype, le gène BREVIS RADIX (BRX), mot latin signifiant 'racine courte'. Bien que l'on connaisse le gène BRX, on connaît finalement peu de choses sur son importance adaptative. Dans cette étude, nous avons montré que la mutation dans le gène BRX rend la plante plus résistante aux sols acides. Dans l'optique de mieux comprendre cette valeur adaptative du mutant brx, nous avons analysé dans quels tissus le gène BRX jouait un rôle important. Nous avons pu mettre en évidence que BRX est important pour le développement du protophloème. Le protophloème est un élément du système vasculaire de la plante. En général, les plantes supérieures possèdent deux systèmes de transport à longue distance. L'un d'eux, appelé xylème, transporte l'eau et les nutriments absorbés du sol par les racines vers les feuilles. Les feuilles sont le siège du processus de photosynthèse au cours duquel sont produits des sucres qui devront être distribués partout dans les autres parties de la plante. Le tissu cellulaire chargé de livrer les produits de la photosynthèse, ainsi que les régulateurs de croissance, est le phloème. Ce dernier regroupe le métaphloème et le protophloème. Le protophloème est essentiel pour la livraison des sucres synthétisés ainsi que des signaux de croissance aux pointes des racines, centres organogéniques responsables de la production de nouvelles cellules durant la phase de croissance de la racine. La structure du protophloème peut être décrite comme des tubes continus, vides et résistants, faits de cellules spécialisées qui permettent un transport efficace et rapide. Nous avons montré que dans les mutants brx ces canaux de transports sont discontinus car certaines cellules n'ont pas terminé leur cycle de différenciation. Ces cellules obstruent le conduit ce qui fait que les sucres et les signaux de croissance, comme l'auxine, ne peuvent plus être transportés aux méristèmes. En conséquence, la prolifération de l'activité des méristèmes est compromise, ce qui explique les racines courtes. Au lieu d'être délivré aux méristèmes, l'auxine se concentre en amont des méristèmes où cela provoque l'apparition de nouvelles racines branchées et, très probablement, l'activation des pompes à protons. Sur des sols acides, la concentration en ion H+ est très élevée. Ces ions entrent dans les cellules de la racine par diffusion et perturbent notablement la croissance des racines et de la plante en général. Si les cellules de la racine possédaient des pompes à protons hyperactives, elles seraient capable d'évacuer le surplus d'ions H+ en dehors de la cellule, ce qui leur assurerait de meilleures chances de survie sur sols acides. De fait, le mutant brx est capable d'acidifier le milieu de culture dans lequel il est cultivé plus efficacement que la plante sauvage. Ce mutant est également capable de donner plus de progéniture sur ce type de milieu de croissance que les plantes sauvages. Finalement, nous avons trouvé d'autres mutants brx en milieu naturel poussant sur sols acides, ce qui suggère fortement que la mutation du gène BRX est une des causes de l'adaptation aux sols acides. -- Plants as sessile organisms have developed different mechanisms to cope with the complex environmental conditions in which they live. Adaptation is the process through which traits evolve by natural selection to functionally improve in a given environmental context. An adaptation to the environment is characterized by the genetic changes in the entire populations that have been fixed by natural selection over many generations. BREVIS RADIX (BRX) gene was found through natural Arabidopsis accessions screen and was characterized as a root growth regulator since loss-of-function mutants exhibit arrested post-embryonic primary root growth in addition to a more branched root system. Although brx loss-of-function causes a complete alteration in root architecture, BRX activity is only required in the root vasculature, in particular in protophloem cell file. Protophloem is a part of the phloem transport network and is responsible for delivery of photo-assimilates and growth regulators, coming from the shoot through mature phloem component - metaphloem, to the all plant primary meristems. In order to perform its function, protophloem is the first cell file to differentiate within the root meristem. During this process, protophloem cells undergo a partial programmed cell death, during which they build a thicker cell wall, degrade nucleus and tonoplast while plasma membrane stays functional. Interestingly, protophloem cells enter elongation process only after differentiation into sieve elements is completed. Here we show that brx mutants fail to differentiate protophloem cell file properly, a phenotype that can be distinguished by a presence of a "gap" cells, non-differentiated cells between two flanking differentiated cells. Discontinuity of protophloem differentiation in brx mutants is considered to be a consequence of local hyperactivity of CLAVATA3/EMBRYO SURROUNDING REGION 45 (CLE45) - BARELY ANY MERISTEM 3 (BAM3) signaling module. Interestingly, a CLE45 activity, most probably at the level of receptor binding, can be modulated by apoplastic pH. Altogether, our results imply that the activity of proton pumps, expressed in non-differentiated cells of protophloem, must be maintained under certain threshold, otherwise CLE45-BAM3 signaling pathway will be stimulated and in turn protophloem will not differentiate. Based on vacuolar morphology, a premature cell wall acidification in brx mutants stochastically prevents the protophloem differentiation. Only after protophloem differentiates, proton pumps can be activated in order to acidify apoplast and to support enucleated protophloem multifold elongation driven by surrounding cells growth. Finally, the protophloem differentiation failure would result in an auxin "traffic jam" in the upper parts of the root, created from the phloem-transported auxin that cannot be efficiently delivered to the meristem. Physiologically, auxin "leakage" from the plant vasculature network could have various consequences, since auxin is involved in the regulation of almost every aspect of plant growth and development. Thus, given that auxin stimulates lateral roots initiation and growth, this scenario explains more branched brx root system. Nevertheless, auxin is considered to activate plasma membrane proton pumps. Along with this, it has been shown that brx mutants acidify media much more than the wild type plants do, a trait that was proposed as an adaptive feature of naturally occurring brx null alleles in Arabidopsis populations found on acidic soils. Additionally, in our study we found that most of accessions originally collected from acidic sampling sites exhibit hypersensitivity to CLE45 treatment. This implies that adaptation of plants to acidic soil involves a positive selection pressure against upstream negative regulators of CLE45-BAM3 signaling, such as BRX. Perspective analysis of these accessions would provide more profound understanding of molecular mechanisms underlying plant adaptation to acidic soils. All these results are suggesting that targeting of the factors that affect protophloem differentiation is a good strategy of natural selection to change the root architecture and to develop an adaptation to a certain environment. -- Les plantes comme organismes sessiles ont développé différents mécanismes pour s'adapter aux conditions environnementales complexes dans lesquelles elles vivent. L'adaptation est le processus par lequel des traits vont évoluer via la sélection naturelle vers une amélioration fonctionnelle dans un contexte environnemental donné. Une adaptation à l'environnement est caractérisée par des changements génétiques dans des populations entières qui ont été fixés par la sélection naturelle sur plusieurs générations. Le gène BREVIS RADIX (BRX) a été identifié dans le crible d'une collection d'accessions naturelles d'Arabidopsis et a été caractérisé comme un régulateur de la croissance racinaire étant donné que le mutant perte-de-fonction montre une croissance racinaire primaire arrêtée au stade post-embryonnaire et présente de plus un système racinaire plus ramifié que la plante sauvage. Bien que le mutant perte-de-fonction brx cause une altération complète de l'architecture racinaire, l'activité de BRX n'est requise que dans la vascularisation racinaire, en particulier au niveau du protophloème. Le protophloème est un composant du réseau de transport du phloème et est responsable du transit des dérivés de la photosynthèse ainsi que des régulateurs de croissances, venant de la partie aérienne par le phloème mature (métaphloème) vers tous les méristèmes primaires de la plante. Pour pouvoir réaliser sa fonction, le protophloème est la première file de cellules à se différencier à l'intérieur du méristème de la racine. Pendant ce processus, les cellules du protophloème subissent une mort cellulaire programmée partielle durant laquelle elles épaississent leur paroi cellulaire, dégradent le noyau et le tonoplaste tandis que la membrane plasmique demeure fonctionnelle. De manière intéressante, les cellules du protophloème entament le processus d'allongement seulement après que la différenciation en tubes criblés soit complète. Ce travail montre que le mutant brx est incapable de mener à bien la différenciation de la file de cellules du protophloème, phénotype qui peut être visualisé par la présence de cellules 'trous', de cellules non différenciées entourées de deux cellules différenciées. La discontinuité de la différenciation du phloème dans le mutant brx est considérée comme la conséquence de l'hyperactivité localisée du module de signalisation CLA VA TA3/EMBRYO SURROUNDING REGION 45 (CLE45) - BARELY ANY MERISTEM 3 (BAM3). De manière intéressante, l'activité de CLE45, très probablement au niveau de la liaison avec le récepteur, peut être modulé par le pH apoplastique. Pris ensemble, nos résultats impliquent que l'activité des pompes à protons, actives dans les cellules non différenciées du protophloème, doit être maintenue en dessous d'un certain seuil autrement la cascade de signalisation CLE45-BAM3 serait stimulée, en conséquence de quoi le protophloème ne pourrait se différencier. D'après la morphologie vacuolaire, une acidification prématurée de la paroi cellulaire dans le mutant brx empêche la différenciation du protophloème de manière stochastique. Une fois que le protophloème se différencie, les pompes à protons peuvent alors être activées afin d'acidifier l'apoplaste et ainsi faciliter l'allongement des cellules énuclées du protophloème, entraînées par la croissance des cellules environnantes. Finalement, la différenciation défectueuse du protophloème produit une accumulation d'auxine dans la partie supérieure de la racine car le phloème ne peut plus acheminer efficacement l'auxine au méristème. Physiologiquement, la 'fuite' d'auxine à partir du réseau vasculaire de la plante peut avoir des conséquences variées puisque l'auxine est impliquée dans la régulation de la majorité des aspects de la croissance et développement de la plante. Etant donné que l'auxine stimule l'initiation et développement des racines latérales, ce scénario pourrait expliquer le système racinaire plus ramifié du mutant brx. En plus, l'auxine est considérée comme un activateur des pompes à protons. Par ailleurs, nous avons montré que les mutants brx ont la capacité d'acidifier le milieu plus efficacement que les plantes sauvages, une caractéristique des populations sauvages <¥Arabidopsis poussant sur des sols acides et contenant les allèles délétés brx. De plus, dans nos résultats nous avons mis en évidence que la plupart des accessions collectées originellement sur des sites acidophiles montre une hypersensibilité au traitement par CLE45. Ceci implique que l'adaptation des plantes aux sols acides repose sur la pression de sélection positive à rencontre des régulateurs négatifs de CLE45- BAM3, situés en amont de la cascade, tel le produit du gène BRX. Les analyses de ces accessions pourraient aboutir à une meilleure compréhension des mécanismes moléculaires responsables de l'adaptation des plantes aux sols acides. Tous nos résultats suggèrent que le ciblage des facteurs affectant la différenciation du protophloème serait une stratégie gagnante dans la sélection naturelle pour changer l'architecture de la racine et ainsi s'adapter efficacement à un nouvel environnement.

Report and Specification for Transportation Program Management System, HR-394, 1997

TPMS is proposed as a distributed, PC-based system for automating two processes required for road improvements in Iowa: a) the annual preparation, submission, and approval of road improvement programs. b) the ongoing process of developing plans and obtaining approval for projects to be let for bids.

Development of Bridge Load Testing Process for Load Evaluation, TR-445, 2003

Recent reports indicate that of the over 25,000 bridges in Iowa, slightly over 7,000 (29%) are either structurally deficient or functionally obsolete. While many of these bridges may be strengthened or rehabilitated, some simply need to be replaced. Before implementing one of these options, one should consider performing a diagnostic load test on the structure to more accurately assess its load carrying capacity. Frequently, diagnostic load tests reveal strength and serviceability characteristics that exceed the predicted codified parameters. Usually, codified parameters are very conservative in predicting lateral load distribution characteristics and the influence of other structural attributes. As a result, the predicted rating factors are typically conservative. In cases where theoretical calculations show a structural deficiency, it may be very beneficial to apply a "tool" that utilizes a more accurate theoretical model which incorporates field-test data. At a minimum, this approach results in more accurate load ratings and many times results in increased rating factors. Bridge Diagnostics, Inc. (BDI) developed hardware and software that are specially designed for performing bridge ratings based on data obtained from physical testing. To evaluate the BDI system, the research team performed diagnostic load tests on seven "typical" bridge structures: three steel-girder bridges with concrete decks, two concrete slab bridges, and two steel-girder bridges with timber decks. In addition, a steel-girder bridge with a concrete deck previously tested and modeled by BDI was investigated for model verification purposes. The tests were performed by attaching strain transducers on the bridges at critical locations to measure strains resulting from truck loading positioned at various locations on the bridge. The field test results were used to develop and validate analytical rating models. Based on the experimental and analytical results, it was determined that bridge tests could be conducted relatively easy, that accurate models could be generated with the BDI software, and that the load ratings, in general, were greater than the ratings, obtained using the codified LFD Method (according to AASHTO Standard Specifications for Highway Bridges).