The effect of metal transfer modes and shielding gas composition on the emission of ultraafine particles in MAG steel welding

The present study aims to characterize ultrafine particles emitted during gas metal arc welding of mild steel and stainless steel, using different shielding gas mixtures, and to evaluate the effect of metal transfer modes, controlled by both processing parameters and shielding gas composition, on the quantity and morphology of the ultrafine particles. It was found that the amount of emitted ultrafine particles (measured by particle number and alveolar deposited surface area) are clearly dependent from the main welding parameters, namely the current intensity and the heat input of the Welding process. The emission of airborne ultrafine particles increases with the current intensity as fume formation rate does. When comparing the shielding gas mixtures, higher emissions were observed for more oxidizing mixtures, that is, with higher CO2 content, which means that these mixtures originate higher concentrations of ultrafine particles (as measured by number of particles. by cubic centimeter of air) and higher values of alveolar deposited surface area of particles, thus resulting in a more hazardous condition regarding welders exposure.

Biotoxicity assays of quantum dots in in vitro cultures of Medicago sativa and Medicago truncatula

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Mestre em Biotecnologia

Synthesis of titanate nanostructures using amorphous precursor material and their adsorption/photocatalytic properties

This article reports on a new and swift hydrothermal chemical route to prepare titanate nanostructures (TNS) avoiding the use of crystalline TiO2 as starting material. The synthesis approach uses a commercial solution of TiCl3 as titanium source to prepare an amorphous precursor, circumventing the use of hazardous chemical compounds. The influence of the reaction temperature and dwell autoclave time on the structure and morphology of the synthesised materials was studied. Homogeneous titanate nanotubes with a high length/diameter aspect ratio were synthesised at 160 degrees C and 24 h. A band gap of 3.06 +/- 0.03 eV was determined for the TNS samples prepared in these experimental conditions. This value is red shifted by 0.14 eV compared to the band gap value usually reported for the TiO2 anatase. Moreover, such samples show better adsorption capacity and photocatalytic performance on the dye rhodamine 6G (R6G) photodegradation process than TiO2 nanoparticles. A 98% reduction of the R6G concentration was achieved after 45 min of irradiation of a 10 ppm dye aqueous solution and 1 g L-1 of TNS catalyst.

The contribution of cellblock – histogel – in bronchial washing samples

Introduction: The cellblock is a technique that enables the pathologist to study the morphological detail of residual samples and can be used when it is necessary to perform additional diagnostic techniques. Objective: Demonstrate the processing of bronchial washings in liquid based cytology to cellblock using HistoGel in residual samples, evaluating the morphology and preservation of cytological material. Methods: There were used 40 residual samples from bronchial washings in liquid based cytology, after determination of the clinical diagnosis, being made subsequently 40 cellblocks using HistoGel. For each cellblock there was made one histological section for analysis of cell morphology, which was subsequently stained with the routine histological staining. After microscope observation, the morphology was evaluated by 3 experts in the field of pathology, based on the parameters: Cellularity, Preservation and Background. Results: The average final score of 3 evaluators, on a scale of 0 to 100, in assessing the morphology of the 40 samples was 55.6. From the 40 histological sections, 5 of them were considered not viable for evaluation. Conclusions: The results obtained indicate median quality maintenance of morphology. However, it is noted that in only 5 cases it was not possible to determine an evaluation, knowing from the outset that these are residual samples with a very scant cellularity. Thus, it is possible to say that the processing of bronchial washings to cellblock using HistoGel contributes to a concentration of the cytological material, allowing its evaluation and subsequent diagnosis. Additional diagnostic techniques are shown equally viable in these cellblocks.

"In-vitro" corrosion behaviour of the magnesium alloy with Al and Zn (AZ31) protected with a biodegradable polycaprolactone coating loaded with hydroxyapatite and cephalexin

Mg alloys are very susceptible to corrosion in physiological media. This behaviour limits its widespread use in biomedical applications as bioresorbable implants, but it can be controlled by applying protective coatings. On one hand, coatings must delay and control the degradation process of the bare alloy and, on the other hand, they must be functional and biocompatible. In this study a biocompatible polycaprolactone (PCL) coating was functionalised with nano hydroxyapatite (HA) particles for enhanced biocompatibility and with an antibiotic, cephalexin, for anti-bacterial purposes and applied on the AZ31 alloy. The chemical composition and the surface morphology of the coated samples, before and after the corrosion tests, were studied by scanning electron microscopy (SEM) coupled with energy dispersive x-ray analysis (EDX) and Raman. The results showed that the presence of additives induced the formation of agglomerates and defects in the coating that resulted in the formation of pores during immersion in Hanks' solution. The corrosion resistance of the coated samples was studied in Hank's solution by electrochemical impedance spectroscopy (EIS). The results evidenced that all the coatings can provide corrosion protection of the bare alloy. However, in the presence of the additives, corrosion protection decreased. The wetting behaviour of the coating was evaluated by the static contact angle method and it was found that the presence of both hydroxyapatite and cephalexin increased the hydrophilic behaviour of the surface. The results showed that it is possible to tailor a composite coating that can store an antibiotic and nano hydroxyapatite particles, while allowing to control the in-vitro corrosion degradation of the bioresorbable Mg alloy AZ31. (C) 2015 Elsevier Ltd. All rights reserved.

Characterisation and electrochemical behaviour of electrodeposited Cu-Fe foams applied as pseudocapacitor electrodes

Copper iron (Cu-Fe) 3D porous foams for supercapacitor electrodes were electrodeposited in the cathodic regime, on stainless steel current collectors, using hydrogen bubbling dynamic template. The foams were prepared at different current densities and deposition times. The foams were submitted to thermal conditioning at temperatures of 150 and 250 degrees C. The morphology, composition and structure of the formed films were studied by SEM, EDS and XRD, respectively. The electrochemical behaviour was studied by cyclic voltammetry, electrochemical impedance spectroscopy and chronopotentiometry. The morphology of the 3D Cu-Fe foams is sensitive to the electrodeposition current and time. The increase of the current density produces a denser, larger and more ramified dendritic structure. Thermal conditioning at high temperature induces a coarser grain structure and the formation of copper oxides, which affect the electrochemical behaviour. The electrochemical response reveals the presence of various redox peaks assigned to the oxidation and reduction of Cu and Fe oxides and hydroxides in the foams. The specific capacitance of the 3D Cu Fe foams was significantly enhanced by thermal conditioning at 150 degrees C. The highest specific capacitance values attained 297 Fg(-1) which are much above the ones typically observed for single Cu or Fe Oxides and hydroxides. These values highlight a synergistic behaviour resulting from the combination of Cu and Fe in the form of nanostructured metallic foams. Moreover, the capacitance retention observed in an 8000 charge/discharge cycling test was above 66%, stating the good performance of these materials and its enhanced electrochemical response as supercapacitor negative electrodes. (C) 2014 Elsevier B.V. All rights reserved.

Mechanical and thermal characterization of a structural polyurethane adhesive modified with thermally expandable particles

Thermally expandable particles (TEPs) are used in a wide variety of applications by industry mainly for weight reduction and appearance improvement for thermoplastics, inks, and coatings. In adhesive bonding, TEPs have been used for recycling purposes. However, TEPs might be used to modify structural adhesives for other new purposes, such as: to increase the joint strength by creating an adhesive functionally modified along the overlap of the joint by gradual heating and/or to heal the adhesive in case of damage. In this study, the behaviour of a structural polyurethane adhesive modified with TEPs was investigated as a preliminary study for further investigations on the potential of TEPs in adhesive joints. Tensile bulk tests were performed to get the tensile properties of the unmodified and TEPs-modified adhesive, while Double Cantilever Beam (DCB) test was performed in order to evaluate the resistance to mode I crack propagation of unmodified and TEPs-modified adhesive. In addition, in order to investigate the behaviour of the particles while encapsulated in adhesives, a thermal analysis was done. Scanning electron microscopy (SEM) was used to examine the fracture surface morphology of the specimens. The fracture toughness of the TEPs-modified adhesive was found to increase by addition of TEPs, while the adhesive tensile strength at yield decreased. The temperature where the particles show the maximum expansion varied with TEPs concentration, decreasing with increasing the TEPs content.

The insular shelves of the Faial-Pico Ridge (Azores archipelago): a morphological record of its evolution

Shelves surrounding reefless volcanic ocean islands are formed by surf erosion of their slopes during changing sea levels. Posterosional lava flows, if abundant, can cross the coastal cliffs and fill partially or completely the accommodation space left by erosion. In this study, multibeam bathymetry, high-resolution seismic reflection profiles, and sediment samples are used to characterize the morphology of the insular shelves adjacent to Pico Island. The data show offshore fresh lava flow morphologies, as well as an irregular basement beneath shelf sedimentary bodies and reduced shelf width adjacent to older volcanic edifices in Pico. These observations suggest that these shelves have been significantly filled by volcanic progradation and can thus be classified as rejuvenated. Despite the general volcanic infilling of the shelves around Pico, most of their edges are below the depth of the Last Glacial Maximum, revealing that at least parts of the island have subsided after the shelves formed by surf erosion. Prograding lava deltas reached the shelf edge in some areas triggering small slope failures, locally decreasing the shelf width and depth of their edges. These areas can represent a significant risk for the local population; hence, their identification can be useful for hazard assessment and contribute to wiser land use planning. Shelf and subaerial geomorphology, magnetic anomalies and crustal structure data of the two islands were also interpreted to reconstruct the long-term combined onshore and offshore evolution of the Faial-Pico ridge. The subaerial emergence of this ridge is apparently older than previously thought, i.e., before approximate to 850 ka.

Schistosoma mansoni Sambon, 1907: comparative morphologica studies of some Brazilian strains

The morphology of Schistosoma mansoni adult male worms from three strains which have been maintained in albino mice for several generations, was compared to a strain that has been isolated from the natural host Nectomys squamipes (Rodentia: Muridae) captured in Sumidouro (Rio de Janeiro State) and have been maintained in the same sylvatic rodent under laboratory conditions. Total length of specimens, distance between suckers, the number of testes and extention of testes grouping were the taxonomic characters analysed. The worms recovered from N. squamipes showed expressive differences (p< 0.01) compared to the other strains regarding the considered morphological characters. The strains that were maintained in mice presented statistical differences (p< 0.01) in several characters. Some adult worms besides the normal position of the testes also showed an atypical arrangement of these glands. It can be concluded that the morphology of adult worms may be used to distinguish S. mansoni strains and that morphological changes in adult worms are not induced by successive inoculations of a strain in mice.

Intestinal spirochetosis: first cases reported in Brazil and the use of immunohistochemistry as an aid in histopathological diagnosis

Colonization of the colon and rectum by intestinal spirochetes is detected for the first time in Brazil in 4 of 282 (1.41%) patients who had undergone sigmoidoscopy and/or colonoscopy with a histopathological diagnosis of chronic non specific-colitis. This frequency is probably understimated, since surgically obtained specimens were not considered in the present study. Histopathological diagnosis was performed using routine stains like hematoxylin-eosin which showed the typical, of 3-µm thick hematoxyphilic fringe on the brush border of the surface epithelium, and by silver stains like the Warthin-Starry stain. Immunohistochemical procedures using two, polyclonal, primary antibodies, one against Treponema pallidum and the other against Leptospira interrogans serovar copenhageni serogroup Icterohaemorrhagiae cross-reacted with spirochetal antigen/s producing a marked contrast of the fringe over the colonic epithelium, preserving the spiral-shaped morphology of the parasite. In one case with marked diarrhea, immunohistochemistry detected spirochetal antigen/s within a cell in an intestinal crypt, thus demonstrating that the infection can be more widely disseminated than suspected using routine stains. Immunohistochemical procedures, thus, greatly facilitate the histological diagnosis of intestinal spirochetosis and may contribute to a better understanding of the pathogenesis of the disease. Transmission and scanning electron microscopy performed in one case showed that the spirochete closely resembled the species designated as Brachyspira aalborgi.

Synanthropic rodent reservoirs of Trypanosoma (Schizotrypanum) cruzi in the valley of Caracas, Venezuela

Direct blood examination and xenodiagnosis of 47 synanthropic rodents (Rattus rattus, R. norvegicus, Mus musculus) captured in the valley of Caracas, Venezuela, revealed trypanosomal infections in 12 R. rattus, 10 with T. lewisi and 2 with T. cruzi. Of the latter the course of parasitemia, the pleomorphism of the bloodstream trypomastigotes, tissue tropism in naturally and experimentally infected rats and mice, host mortality, morphology of fecal parasites in Rhodnius prolixus used for xenodiagnosis, and infectivity of the bug feces for NMRI mice, were all characteristic of Trypanosoma (Schizotrypanum) cruzi. One rat, with a patent parasitemia, had numerous nests of amastigotes in cardiac muscle and moderate parasitism of the smooth muscle of the duodenum and of skeletal muscle. Mice inoculated with fecal flagellates from the bugs had moderate tissue tropism in the same organs and also in the colon and pancreas. The possible role of R. rattus in the establishment of foci of Chagas’ disease in Caracas is discussed

Inoculation of Lacazia loboi into the subcutaneous tissue of the hamster cheek pouch

The subcutaneous tissue of the hamster cheek pouch, a site of immunologic privilege, has been used to investigate the potential infectivity of different types of parasites. It has been demonstrated that the implantation of fragments of lesions induced by the fungus Lacazia loboi, the etiologic agent of Jorge Lobo's disease, into the subcutaneous tissue of the hamster cheek pouch resulted in parasite multiplication and dissemination to satellite lymph nodes16. Here we describe the evolution of lesions induced by the inoculation of the isolated fungus into this immunologically privileged site. The morphology of the inflammatory response and fungal viability and proliferation were evaluated. Inoculation of the fungus into the cheek pouch induced histiocytic granulomas with rare lymphocytes. Although fungal cells were detected for a period of up to 180 days in these lesions, the fungi lost viability after the first day of inoculation. In contrast, when the parasite was inoculated into the footpad, non-organized histiocytic lesions were observed. Langhan's giant cells, lymphocytes and fungal particles were observed in these lesions. Fungal viability was observed up to 60 days after inoculation and non-viable parasites were present in the persistent lesions up to 180 days post-inoculation. These data indicate that the subcutaneous tissue of the hamster cheek pouch is not a suitable site for the proliferation of Lacazia loboi when the fungus isolated from human tissues is tested.

Genetic variability of Triatoma flavida and Triatoma bruneri (Hemiptera: Reduviidae) by RAPD-PCR technique

The Triatominae (Hemiptera:Reduviidae) contains the principal and potential Chagas disease vectors present in Mexico, Central America and South America. Triatoma flavida and T. bruneri are Cuban species. These species are closely related according to morphology and were considered synonyms until 1981, when they were separated on the grounds of external characters of the body and the morphology of male genitalia. The present study seeks to analyze genetic polymorphism of T. flavida and T. bruneri populations using RAPD techniques, and to assess the genetic relationship between these species. Ten random primers were used to evaluate the genetic variability among species using RAPD-PCR. The genetic flow among them was calculated. The dendrogram based on calculated Jaccard distances showed two clearly distinguishable clusters which coincided with the studied species. Within each species, moderate genetic differentiation (Fst 0.05-0.15) and migration rates (N > 1) were found among populations, that reveal gene flow and genetic homogeneity. Between species, the Fst value showed a high genetic differentiation and the migration rate was insufficient to maintain genetic homogeneity, and confirmed the absence of gene flow between them. Our results confirm the genetic variability among T. flavida and T. bruneri species.

Histological evaluation of the lesion induced by inoculation of Leishmania mexicana in the cheek pouch of the hamster

We have studied the role of the immune response in the morphology of the leishmaniotic granuloma induced in the cheek pouch of hamsters, an immunologically privileged site, after inoculation of 3 x 10(5) Leishmania mexicana. Animals were histologically and immunologically evaluated until 120 days after inoculation. Independent of the time of sacrifice, the animals were always non-reactors to the footpad test (FPT). At histology, the introduction of L. mexicana in the cheek pouch leads to an abscess that evolves to a granulomatous reaction rich in amastigote forms, and later it leads to resolution, even in the absence of immune response detectable by FPT. Our results demonstrate that the development of immune response is not preponderant for the control of infection induced by L. mexicana inoculated subcutaneously in the cheek pouch of the hamster. It also suggests that the macrophages present in the leishmaniotic granuloma are capable of eliminating this parasite, even in the absence of immune response evaluated by FPT.

Role of partial hepatectomy on Capillaria hepatica-induced hepatic fibrosis in rats

It is known that hepatic fibrosis may regress following partial hepatectomy, since the hepatic parenchyma regenerates very rapidly, but not the excess of fibrous tissue. The present study evaluated this hypothesis by observing the behavior of systematized septal fibrosis induced by either 30 or 90-day-old Capillaria hepatica infection, in rats subjected to partial hepatectomy. The results revealed that the morphology of the fibrosis was unaffected, but its relative quantity within the microscope field appeared significantly decreased, as a consequence of the increased liver tissue mass following regeneration.