Obtenção de extratos da Opuntia fícus-indica L. Mill e suas aplicações em formulações cosméticas: avaliação in vivo do sensorial e da eficácia hidratante

Opuntia fícus - indica (L.) Mill is a cactacea presents in the Caatinga ecosystem and shows in its chemical c omposition flavonoids, galacturonic acid and sugars. Different hydroglicolic (EHG001 and EHG002) and hydroethanolic subsequently lyophilized (EHE001 and EHE002) extracts were developed. The EHE002 had his preliminary phytochemical composition investigated by thin layer chromatography (TLC) and we observed the predominance of flavonoids. Different formulations were prepared as emulsions with Sodium Polyacrylate (and) Hydrogenated Polydecene (and) Trideceth - 6 (Rapithix® A60), and Polyacrylamide (and) C13 - 14 I soparaffin (and) Laureth - 7 (Sepigel® 305), and gel with Sodium Polyacrylate (Rapithix® A100). The sensorial evaluation was conducted by check - all - that - apply method. There were no significant differences between the scores assigned to the formulations, howe ver, we noted a preference for those formulated with 1,5% of Rapithix® A100 and 3,0% of Sepigel® 305. These and the formulation with 3% Rapithix® A60 were tested for preliminary and accelerated stability. In accelerated stability study, samples were stored at different temperatures for 90 days. Organoleptic characteristics, the pH values and rheological behavior were assessed. T he emulsions formulated with 3,0% of Sepigel® 305 and 1,5% of Rapithix® A60 w ere stable with pseudoplastic and thixotropic behavior . The moisturizing clinical efficacy of the emulsions containing 3,0% of Sepigel® 305 containing 1 and 3% of EHG001 was performed using the capacitance method (Corneometer®) and transepidermal water lost – TEWL evaluation ( Tewameter®). The results showed t hat the formulation with 3% of EHG001 increased the skin moisturizing against the vehicle and the extractor solvent formulation after five hours. The formulations containing 1 and 3% of EHG001 increased skin barrier effect by reducing transepidermal water loss up to four hours after application.

Desenvolvimento e caracterização de nanoemulsões cosméticas contendo extrato de Opuntia ficus-indica L. Mill e avaliação in vivo da eficácia hidratante

Nanoemulsions are emulsified systems, characterized for reduced droplet size (50- 500nm), which the main characteristic are kinect stability and thermodynamic instability. These are promising systems on cosmetic area due to their droplet size that provide different advantages when compared to conventional systems, among others, larger surface area and better permeability. The Opuntia ficus-indica (L.) Mill is a plant cultivated on Caatinga Brazilian biome, which has great socioeconomic importance to region. This plant shows carbohydrates utilized for cosmetic industry as moisturizing active in their chemical composition. The aim of study was to develop, characterize, evaluate stability and moisturizing efficacy of cosmetic nanoemulsions added to Opuntia ficus-indica (L.) Mill extract. Nanoemulsions preparation was made using a low energy method. Different nanoemulsions were formulated varying the ratio of oil, water and surfactant phases beyond xanthan gum (0.5% e 1%) and Opuntia ficus-indica (L.) Mill hydroglycolic extract addition on 1% and 3%. Obtained nanoemulsions were submitted to preliminary and accelerated stability tests. The evaluated parameters monitored were: macroscopic aspect, pH value, droplet size, zeta potential and polydispersion index, during 60 days on different temperatures. Stable formulations were submitted to moisturizing efficacy assessment by capacitance and transepidermal water loss methodologies during 5 hours. Stable samples were white and showed homogeneous and fluid aspect, pH value was inside ideal range (4,5-6,0) to topical application and droplet size under 200nm characterizing these system as nanoemulsions. Developed nanoemulsions did not decrease transepidermal water loss, however increased the water content on stratum corneum, highlighting the nanoemulsions containing 0.5% of xanthan gum and 1% of hydroglycolic extract. This work presents cosmetic moisturizing nanoemulsions composed to vegetal raw material from Brazilian Caatinga with potential to be used on cosmetic area.

John Stuart Mill e o cultivo da individualidade

The development of a human individual was a matter of investigation for many thinkers through the history of philosophy. The meanings that this development has taken were, nevertheless, very diversified, involving moral, political, epistemological, aesthetical and even religious aspects. The main agents in this process of development of human individuality are, on the one hand, each individual, who has to strive to improve himself the most, creating and resorting to the means available to that; on the other hand, the fomentalist State also have to take his part in this process, given that such a State has a direct interest in the development of his own citizens; it has to act in such a way that it can foment new and enhance the old existing means that can be used to accomplish the task of developing the human individuality. The goal of this thesis is to investigate the meaning that such development has acquired for the utilitarian philosopher John Stuart Mill, from his conception of individuality.

FEM Analysis to Optimally Design End Mill cutters for Milling of Ti-6Al-4V

This paper presents an FEM analysis conducted for optimally designing end mill cutters through verifying the cutting tool forces and stresses for milling Titanium alloy Ti-6Al-4 V. Initially, the theoretical tool forces are calculated by considering the cutting edge on a cutting tool as the curve of an intersection over a spherical/flat surface based on the model developed by Lee & Altinas [1]. Considering the lowest tool forces the cutting tool parameters are taken and optimal design of end mill is decided for different sizes. Then the 3D CAD models of the end mills are developed and used for Finite Element Method to verify the cutting forces for milling Ti-6Al-4 V. The cutting tool forces, stress, strain concentration (s), tool wear, and temperature of the cutting tool with the different geometric shapes are simulated considering Ti-6Al-4 V as work piece material. Finally, the simulated and theoretical values are compared and the optimal design of cutting tool for different sizes are validated. The present approach considers to improve the quality of machining surface and tool life with effects of the various parameters concerning the oblique cutting process namely axial, radial and tangential forces. Various simulated test cases are presented to highlight the approach on optimally designing end mill cutters.

Finite element analysis of hot rolling in the blooming mill

During this thesis work a coupled thermo-mechanical finite element model (FEM) was builtto simulate hot rolling in the blooming mill at Sandvik Materials Technology (SMT) inSandviken. The blooming mill is the first in a long line of processes that continuously or ingotcast ingots are subjected to before becoming finished products. The aim of this thesis work was twofold. The first was to create a parameterized finiteelement (FE) model of the blooming mill. The commercial FE software package MSCMarc/Mentat was used to create this model and the programing language Python was used toparameterize it. Second, two different pass schedules (A and B) were studied and comparedusing the model. The two pass series were evaluated with focus on their ability to healcentreline porosity, i.e. to close voids in the centre of the ingot. This evaluation was made by studying the hydrostatic stress (σm), the von Mises stress (σeq)and the plastic strain (εp) in the centre of the ingot. From these parameters the stress triaxiality(Tx) and the hydrostatic integration parameter (Gm) were calculated for each pass in bothseries using two different transportation times (30 and 150 s) from the furnace. The relationbetween Gm and an analytical parameter (Δ) was also studied. This parameter is the ratiobetween the mean height of the ingot and the contact length between the rolls and the ingot,which is useful as a rule of thumb to determine the homogeneity or penetration of strain for aspecific pass. The pass series designed with fewer passes (B), many with greater reduction, was shown toachieve better void closure theoretically. It was also shown that a temperature gradient, whichis the result of a longer holding time between the furnace and the blooming mill leads toimproved void closure.

Bioarchaeology of Two Mill Creek Sites from Northwest Iowa: 13PM248 and 13WD402, Research Papers of Office of the State Archaeologist, September 9, 2016 Vol. 41, no. 2

This is a report of a human skeletal remains and artifacts that were excavated from a burial sites in Iowa. The report was written and published by the Office of the State Archaeologist, The University of Iowa, Iowa City

Evaluación de insecticidas químicos alternados con botánicos como opciones de manejo de mosca blanca (Bemisia tabaci, Gennadius) y otros insectos plagas en tomate (Solanum lycopersicum L.), en Tisma, Masaya 2016

La mosca blanca (Bemisia tabaci, Genn.) y los Geminivirus son los principales agentes de daño causantes de problemas fitosanitarios severos para los productores de tomate (Solanum lycopersicum, L.), este insecto provoca importantes pérdidas económicas, disminuyendo los rendimientos al afectar la calidad de frutos. En base a esta esta situación se realizó un estudio en el municipio de Tisma, Masaya en el período comprendido entre Julio y Septiembre del 2015 para evaluar la efectividad que tiene para controlar plagas los insecticidas químicos alternados con botánicos, los tratamientos evaluados fueron: Engeo alternado con Chile+Ajo+Jabón, Imidacloprid alternado con Madero Negro, Abamectina alternado con Neem, Monarca alternado con Chile+ajo y testigo (agua). Las variables evaluadas fueron, número de mosca blanca por planta, incidencia y severidad del daño de virosis por planta, número de Halticus sp por planta, número de Aphis sp por planta, número de Liriomyza sp por planta, numero de Arañas por planta, rendimiento en kg/ha. De los tratamientos evaluados, el menor número de moscas blancas, Halticus sp y menor porcentaje de incidencia y severidad lo presentó el tratamiento Abamectina alternado con Neem. El análisis económico determinó que el tratamiento que obtuvo el mayor rendimiento comercial fue Abamectina alternado con Neem. Se concluye que Abamectina alternado con Neem es el tratamiento que resultó más efectivo para el manejo de mosca blanca y otros insectos plagas.

Alternativas botánica, biológica y química para el manejo de piojo del tomate (Halticus sp) (Hemíptera: Miridae) y mosca blanca (Bemisia tabaci, Gen) (Hemiptera: Aleyroridae) en el cultivo de tomate (Solanum lycopersicum L.), bajo condiciones de casa malla.

El piojo del tomate (Halticus sp.) y la mosca blanca (Bemisia tabaci) son los principales agentes de daño, causantes de problemas fitosanitarios severos para los productores de tomate (Solanum lycopersicum, L), bajo condiciones de casa malla. Esta plaga provoca importantes pérdidas económicas, disminuyendo así los rendimientos al afectar la calidad de los frutos lo cual incide en mayores costos de producción. En base a esta problemática en el CEVAT (Centro de Experimentación y Validación de Tecnologías), UNA, se realizó un estudio en el período comprendido entre los meses de Septiembre 2015 a Enero 2016, con el objetivo de evaluar insecticidas biológico, botánico y químico contra el piojo del tomate y mosca blanca. Los productos evaluados fueron: Engeo, Madero Negro y Metarhizium anisopliae. Las variables evaluadas fueron: número de Halticus sp por planta, incidencia del daño por Halticus sp por planta, numero de mosca blanca por planta, incidencia del daño de virosis por planta, severidad del daño de virosis por planta. De los tratamientos evaluados, el menor promedio de piojo del tomate por planta lo presentó el tratamiento Engeo y de igual manera en mosca blanca, seguido de madero negro. El menor porcentaje de incidencia y severidad lo presentó el tratamiento Engeo en comparación con los demás tratamientos evaluados. El análisis económico realizado determinó que los tratamientos que presentaron los mejores rendimientos fueron Engeo con 18,156.25 kg/ha, seguido por Madero Negro con 16,891 kg/ha y Metarhizium anisopliae que obtuvo 14,797 kg/ha. Engeo presentó el mayor beneficio neto con 16,642.92 US$/ha, seguido por Madero Negro con 15,240.86 US$/ha. En el análisis de la tasa de retorno marginal resultó que el tratamiento Madero Negro es el que obtuvo la mejor tasa de retorno marginal con 6,307.36 % es decir 63.07 US$ por cada dólar invertido.

Cryopreservation of avocado (Persea Americana Mill.) using somatic embryos

Avocado genetic resources are currently maintained in the form of field repositories at great cost and risk of natural disasters, pest and diseases. Cryopreservation offers a necessary, complimentary method that is safe, cost-effective and long-term. However, long-term maintenance and regeneration of plantlets from avocado somatic embryos has been a major barrier in the development of new avocado cultivars. In this study, two protocols for vitrification-based cryopreservation of avocado somatic embryos were investigated. Globular somatic embryos of two avocado cultivars were tested, revealing cultivar-dependent differences in desiccation tolerance and subsequent freezing resistance, possibly attributed to their size and culture age. A two-step regeneration system, involving an intermediate liquid phase step between subcultures in solid medium, significantly enhanced shoot development from somatic embryo tissue. This work will add considerable value towards cryopreservation of avocado somatic embryos for germplasm conservation and the generation of new and improved avocado cultivars.

Indole acetic acid and ACC deaminase fromendophytic bacteria improves the growth of Solanum lycopersicum

Background: Endophytic bacteria are ubiquitous in all plant species contributing in host plant\'s nutrient uptake and helping the host to improve its growth. Moringa peregrina which is a medicinal plant, growing in arid region of Arabia, was assessed for the presence of endophytic bacterial strains. Results: PCR amplification and sequencing of 16S rRNA of bacterial endophytes revealed the 5 endophytic bacteria, in which 2 strains were from Sphingomonas sp.; 2 strains from Bacillus sp. and 1 from Methylobacterium genus. Among the endophytic bacterial strains, a strain of Bacillus subtilis LK14 has shown significant prospects in phosphate solubilization (clearing zone of 56.71 mm after 5 d), ACC deaminase (448.3 ± 2.91 nM α-ketobutyrate mg-1 h-1) and acid phosphatase activity (8.4 ± 1.2 nM mg-1 min-1). The endophytic bacteria were also assessed for their potential to produce indole-3-acetic acid (IAA). Among isolated strains, the initial spectrophotometry analysis showed significantly higher IAA production by Bacillus subtilis LK14. The diurnal production of IAA was quantified using multiple reactions monitoring method in UPLC/MS–MS. The analysis showed that LK14 produced the highest (8.7 μM) IAA on 14th d of growth. Looking at LK14 potentials, it was applied to Solanum lycopersicum , where it significantly increased the shoot and root biomass and chlorophyll (a and b) contents as compared to control plants. Conclusion: The study concludes that using endophytic bacterial strains can be bio-prospective for plant growth promotion, which might be an ideal strategy for improving growth of crops in marginal lands.

Comparative study of bioactive potential of Fueniculum vulgare Mill. and Matricaria recutita L. phenolic rich extracts to functionalize cottage chesse

Synthetic additives used in a wide variety of food products have been associated to some toxic effects. This conducted to an increasing interest of consumers for natural additives, including food preservers [1]. Many aromatic herbs have been used to prepare bioactive extracts with benefits to the consumer's health. Foeniculum vulgare Mill. (fennel) and Matricaria recutita L. (chamomile) are examples of popular herbs rich in phenolic compounds with documented antioxidant and antimicrobial properties [2,3]. The present work confirms the antioxidant (DPPH scavenging activity, reducing power and lipid peroxidation inhibition) and antimicrobial (against bacteria such as Bacillus cereus and Salmonella Typhimurium and fungi such as Aspergillus niger, A. versicolor and PenicilliumfimicuJosum) activities of fennel and chamomile extracts, obtained by decoction. The chemical characterization of the extracts, performed by HPLC-DAD-ESIIMS, revealed the presence of five flavonoids (mainly qercetin-3-0- glucoside) and twelve phenolic acids (mainly 5-0-caffeolyquinic acid) for fennel extract and the presence of nine flavonoids (mainly luteolin-0-glucuronide) and ten phenolic acids (mainly di-caffeoyl-2,7- anhydro-3-deoxy-2-octulopyranosonic acid) for chamomile extract. Due to their high antioxidant and antimicrobial activities, both extracts were then incorporated (at DPPH scavenging activity EC25 value: 0.35 mg/mL and 0.165 mg/mL for fennel and chamomile, respectively) in cottage cheeses (prepared by Queijos Casa Matias Lda) as natural additives with two objectives: to increase the shelf-life of the cottage cheeses and to provide bioactive properties to the final products. The results showed that the use of these natural extracts did not alter significantly the nutritional characteristics of the cottage cheese in comparison with control samples (cottage cheese without extracts), but improved its antioxidant potential (more evident in the samples with chamomile extract). After 14 days of storage, only the control samples showed signs of degradation. Overall, the present study highlights the preservation potential of fennel and chamomile extracts in cottage cheeses, improving also their bioactivity.

Foeniculum vulgare Mill. as a natural ingredient to improve cottage cheese antioxidant properties

Food industry is focused on the development of novel functional foods containing health promoting natural ingredients. Natural antioxidants present important health benefits like the prevention of several diseases related to oxidative stress [1,2]. Foeniculum vulgare Mill. (fennel) is a source of those compounds with proved antioxidant potential [3]. Herein, after evaluation of 2,2-diphenyl-1-picrylhydrazyl (DPPH) scavenging activity and reducing power of fennel (provided by Américo Duarte Paixão Lda.) decoction, we propose its incorporation into cottage cheese (produced by Queijos Casa Matias Lda.). Three groups of cottage cheese samples were prepared: control; samples with fennel decoction (incorporated at EC25 value=0.35 mg/mL, previously determined by DPPH assay); and samples with fennel powder (incorporated at 1.75 mg/mL, considering the decoction yield=20%). The samples were submitted to an evaluation of DPPH scavenging activity and reducing power immediately after the incorporations, and after 7 and 14 days of storage, at 4 ºC. The incorporation of fennel improved the antioxidant activity of cottage cheese. Samples incorporated with plant powder revealed higher antioxidant properties than samples incorporated with decoction, either in 0 or 7 days of storage. After 14 days, cottage cheese incorporated with fennel decoction gave the highest DPPH scavenging activity (46.72±0.09 mg/mL). A decrease in the antioxidant potential of the cottage cheese with fennel was observed along the shelf life. Nevertheless, it is important to highlight that the samples still display antioxidant properties. Studies regarding the effects of the incorporation of these natural ingredients on nutritional and chemical composition of cottage cheese are in course

Evaluación y producción masiva de hongos entomopatógenos para el manejo del psilido de la papa (Bactericera cockerelli Sulc) en cultivos de tomate (Solanum lycopersicum L.)y chile (Capsicum annuum L.) en invernadero

En la búsqueda de nuevas estrategias para el manejo de la Paratrioza, Bactericera cockerelli, se ha incluido recientemente el uso de hongos entomopatógenos, principalmente debido a su modo de acción. En este trabajo se evaluaron cuatro cepas de hongos entomopatógenos, dos pertencientes a Beauveria bassiana (BB09 y BB42) y dos a Metarhizium anisopliae (MA25 y MA28). Para las cuatro cepas se valoraron cuatro medios de cultivo (Agar Agua, Papa Dextrosa Agar, Papa Dextrosa Agar + 5% Levadura y Papa Dextrosa Agar + 5% Sacarosa) y tres temperaturas diferentes (20, 25 y 30°C); de igual manera, las cuatro cepas se sujetaron a prueba en tres diferentes medios de producción masiva (arroz, bagazo de caña y bagazo de uva). Para estas tres pruebas se evaluó crecimiento de micelio, viabilidad y esporulación. De manera conjunta se observó la adhesión de conidias de cada una de las cepas a ninfas de B. cockerelli bajo condiciones de laboratorio. Para concluir las evaluaciones, se realizaron dos experimentos en invernaderos para valorar las mortalidades generadas en dos cultivos diferentes (chile y tomate) a dos diferentes concentraciones (1x107conidias por mL y 1x108conidias por mL). De las evaluaciones se concluyó que para éstas cepas el medio de cultivo más adecuado es aquél enriquecido con levadura y que dichas cepas se desarrollan mejor a 25°C, a excepción de las cepas de B. bassiana, las cuales generan mayor cantidad de esporas a 30°C; en cuanto a la reproducción masiva, la búsqueda de sustratos alternativos debe continuar, ya que el bagazo de uva y el de caña no fueron capaces de dar las condiciones adecuadas para generar la misma cantidad de esporas que en el medio usual, el arroz. Finalmente, utilizar hongos entomopatógenos para el manejo de B. cockerelli bajo condiciones de invernadero promete ser una estrategia confiable, ya que dependiendo de la concentración y la cepa utilizada, pueden lograrse niveles de control que van desde un 50 a un 82%.

[Cadastral survey map of a land tract fronting Tennallytown Road north of Pierce's Mill Road, Tenleytown, Washington D.C.] /

In lead pencil: Aug. 91.