Use of inert gas-enriched atmospheres and post-packaging irradiation in shelf-life extension of watercress

Watercress (Nasturtium officinale R. Br.) is a semi-aquatic plant of the Brassicaceae family highly appreciated in the Mediterranean cuisine. It features sharp, peppery and slightly tangy taste and contains health-promoting phytochemicals. Its consumption as a fresh-cut product has increased in recent years, as well as the global market of minimally processed vegetables. This demand is driven by the growing interest in the role of food in promoting the human health and wellbeing and to meet consumer needs for fresh-like and more convenient foods. Due to the reduced shelf-life of this plant, the suitability of inert gas-enriched atmospheres and ionizing irradiation for preserving visual, nutritional and functional quality attributes during cold storage was studied. Watercress samples were gathered in the Northeast region of Portugal, rinsed in tap water and a portion was immediately analyzed (non-stored control). The remaining fresh material was packaged in polyethylene bags under N2- and Ar-enriched atmospheres, conventional atmosphere (air) and vacuum (no atmosphere). Samples under conventional atmosphere were irradiated at 1, 2 and 5 kGy of gamma-rays (predicted doses) in a 60Co experimental chamber. A non-irradiated control followed all the experiment. Then, all packaged samples were stored at 4 ºC for 7 days. The studied quality parameters included the colour that was measured with a Konica Minolta colorimeter, and total soluble solids and pH determined in squeezed juice. The proximate composition (moisture, proteins, fat, ash, carbohydrates and energy) was evaluated using the AOA C procedures. Organic acids, free sugars, fatty acids and tocopherols were analyzed by chromatographic techniques. Samples were also evaluated for its DPPH• scavenging activity, reducing power, and lipid peroxidation inhibition capacity trough the inhibition of the β-carotene bleaching and thiobarbituric acid reactive substances (TBAR S) formation. Differences among treatments were analyzed using the one-way analysis of variance (ANO VA) and a linear discriminant analysis (LDA ) was used to evaluate the effects on the overall postharvest quality. After evaluating the effect on the individual quality parameters, the LDA revealed that the Ar-enriched atmosphere and the irradiation at 2 kGy were suitable processing choices for preserving the integrity of the non-stored control samples during cold storage. Thus, these non-thermal treatments were highlighted for shelf-life extension of fresh-cut watercress.

Adaptação e validação para a cultura portuguesa da Late-Life Function and Disability Instrument (LLFDI)

Introdução:O envelhecimento pressupõe alterações no organismo, sendo fundamental a medição das limitações da funcionalidade e da incapacidade na execução de tarefas individuais e sociais por parte dos idosos. As guidelines da ACSM enfatizam que os idosos obtêm benefícios na saúde com a realização de atividade física regular. Objetivo: Adaptar e validar para a cultura portuguesa a Late-Life Function and Disability Instrument (LLFDI). Material e Métodos: A versão portuguesa foi obtida através de um processo de metodologia sequencial. Para avaliar a validade e fiabilidade, esta versão foi administrada a 619 idosos (72±9). Destes, 77 foram submetidos a uma intervenção de fisioterapia com base em dois programas de exercícios, para determinar o poder de resposta. Resultados: Após obtenção da equivalência semântica e de conteúdo, a versão portuguesa da LLFDI demonstrou valores elevados de reprodutibilidade (CCI_função > 0,8 e CCI_incapacidade > 0,7) e níveis bastantes aceitáveis de consistência interna (α Cronbach > 0,82). As correlações obtidas entre a LLFDI e o MOS SF-36 são moderadas a altas. A análise fatorial confirmatória demonstra um modelo ajustado para a componente função (relações positivas e muito fortes) e incapacidade (relações no limiar da aceitabilidade). O Poder de resposta de 4 semanas, demonstrou valores de ESS <0,30 (função) e <0,28 (incapacidade). Os valores de RMS encontram-se entre 0,40 e 0,72 (função) e entre 0,27 e 0,59 (incapacidade). Conclusões: A versão portuguesa da LLFDI demonstrou valores aceitáveis de validade e fiabilidade, revelando valores baixos de poder de resposta.

French good practice guidelines for management of the risk of low back pain among workers exposed to manual material handling: Hierarchical strategy of risk assessment of work situations

International audience

Nitrogen vs argon: what is the most effective atmosphere for shelf-life extension of buckler sorrel leaves?

Buckler sorrel (Rumex induratus Boiss. & Reut.) is an underutilized leafy vegetable with peculiar sensory properties and potential as a gourmet food. In the food industry, different packaging methods have been used for shelf-life extension, but it is important to know how the quality of minimally processed vegetable is affected by these treatments. Recently, nitrogen and argon have been used for food packaging. Nitrogen is low soluble in water and other food constituents and does not support the growth of aerobic microbes. In turn, argon is biochemically active and appears to interfere with enzymatic oxygen receptor sites. In this study, modified atmospheres enriched with nitrogen and argon were evaluated for shelf-life extension of buckler sorrel leaves. Wild samples were gathered in Bragança, Portugal, considering local consumers’ sites and criteria. Healthy and undamaged leaves were selected, rinsed in tap water, and a portion was immediately analyzed (non-stored control). The remaining fresh material was packaged in polyethylene bags under nitrogen- and argon-enriched atmospheres and a conventional control atmosphere (air). All packaged samples were stored at 4 ºC for 12 days and then analyzed. The headspace gas composition was monitored during storage. Different quality attributes were evaluated, including visual (colour), nutritional (macronutrients, individual sugars and fatty acids) and bioactive (hydrophilic and lipophilic molecules and antioxidant properties) parameters. Different statistical tools were used; the one-way analysis of variance (ANO VA) was applied for analyse the differences among treatments and a linear discriminant analysis (LDA ) was used to evaluate the effects on the overall postharvest quality. The argon-enriched atmosphere better prevent the samples yellowing. The proximate composition did not change significantly during storage. Samples in control atmosphere revealed higher protein and ash contents and lower levels of lipids. The non-stored control samples presented the higher amounts of fructose, glucose and trehalose. The storage time increased the palmitic acid levels and decreased the content in α-linolenic and linoleic acids. The γ- e δ-tocopherols were higher after the 12 days of cold storage. Probably, the synthesis of these lipophilic compounds was a plant strategy to fight against the abiotic stress induced by storage. Higher levels of total phenolics and flavonoids and increased reducing power and β-carotene bleaching inhibition capacity were also found in the stored control samples. Once again, this result may be attributed to the intrinsic plant-protection mechanisms. Overall, the argon atmosphere was more suitable for quality preservation and shelf-life extension of buckler sorrel.

Alteration of the bone tissue material properties in type 1 diabetes mellitus: A Fourier transform infrared microspectroscopy study

International audience

ANTHROPOLOGICAL DESCRIPTION OF SKELETAL MATERIAL FROM THE DNIESTER BARROW - CEMETERY COMPLEX, YAMPIL REGION, VINNITSA OBLAST (UKRAINE)

Anthropological examinations were performed on skeletal material from four barrow necropolises located in the Yampil region (Ukraine) and dated to the Eneolithic, Bronze age and iron age . The purpose of the examinations was the determination of sex and age at death of individuals, reconstruction of their stature and assessment of their status of health . The examinations covered 61 individuals: 17 children and 44 adults . Their health status was assessed using four common indicators: linear enamel hypoplasia, cribra orbitalia, porotic hyperostosis and dental caries.

Environmental quality of life index incorporationg MCA & GIS : case study Lisbon Metropolitan Area, Portugal

The study of Quality of Life (Qol) has been conducted on various scales throughout the years with focus on assessing overall quality of living amongst citizens. The main focus in these studies have been on economic factors, with the purpose of creating a Quality of Life Index (QLI).When it comes down to narrowing the focus to the environment and factors like Urban Green Spaces (UGS) and air quality the topic gets more focused on pointing out how each alternative meets this certain criteria. With the benefits of UGS and a healthy environment in focus a new Environmental Quality of Life Index (EQLI) will be proposed by incorporating Multi Criteria Analysis (MCA) and Geographical Information Systems (GIS). Working with MCA on complex environmental problems and incorporating it with GIS is a challenging but rewarding task, and has proven to be an efficient approach among environmental scientists. Background information on three MCA methods will be shown: Analytical Hierarchy Process (AHP), Regime Analysis and PROMETHEE. A survey based on a previous study conducted on the status of UGS within European cities was sent to 18 municipalities in the study area. The survey consists of evaluating the current status of UGS as well as planning and management of UGS with in municipalities for the purpose of getting criteria material for the selected MCA method. The current situation of UGS is assessed with use of GIS software and change detection is done on a 10 year period using NDVI index for comparison purposes to one of the criteria in the MCA. To add to the criteria, interpolation of nitrogen dioxide levels was performed with ordinary kriging and the results transformed into indicator values. The final outcome is an EQLI map with indicators of environmentally attractive municipalities with ranking based on predefinedMCA criteria using PROMETHEE I pairwise comparison and PROMETHEE II complete ranking of alternatives. The proposed methodology is applied to Lisbon’s Metropolitan Area, Portugal.

Influence of implant-abutment angulations and crown material on stress distribution on central incisor: a 3D FEA

Aim: To investigate the effect of implant-abutment angulation and crown material on stress distribution of central incisors. Finite element method was used to simulate the clinical situation of a maxillary right central incisor restored by two different implant-abutment angulations, 15° and 25°, using two different crown materials (IPS E-Max CAD and zirconia). Methods: Two 3D finite element models were specially prepared for this research simulating the abutment angulations. Commercial engineering CAD/CAM package was used to model crown, implant abutment complex and bone (cortical and spongy) in 3D. Linear static analysis was performed by applying a 178 N oblique load. The obtained results were compared with former experimental results. Results: Implant Von Mises stress level was negligibly changed with increasing abutment angulation. The abutment with higher angulation is mechanically weaker and expected to fail at lower loading in comparison with the steeper one. Similarly, screw used with abutment angulation of 25° will fail at lower (about one-third) load value the failure load of similar screw used with abutment angulated by 15°. Conclusions: Bone (cortical and spongy) is insensitive to crown material. Increasing abutment angulation from 15° to 25°, increases stress on cortical bone by about 20% and reduces it by about 12% on spongy bone. Crown fracture resistance is dramatically reduced by increasing abutment angulation. Zirconia crown showed better performance than E-Max one.

Novos monômeros obtidos a partir do metacrilato de glicidila, bisfenol A e 4, 4 isopropilidenodicicloexanol : síntese, caracterização estrutural e propriedades de compósitos para utilização em resinas de restauração dental

Nowadays, composite resins are the direct restorative materials more important in dental clinical performance, due to their versatility and aesthetic excellence. Bis-GMA (2,2-bis[4(2-hydroxy-3-metacryloxypropoxy)phenil]propane) is the base monomer more frequently used in restorative composite resins. However, this monomer presents some disadvantages, such as high viscosity and two aromatic rings in its structure that can promote allergic reactions to the humans. In this work, the main purpose was to synthesize new monomers from glycidyl methacrylate to use in dental restorative materials. Structural characterization of the monomers was carried out through FTIR and NMR 1H, and eight composites were produced from the new monomers, by addition of silane-treated alumino silicate particles (inorganic filler) and a photocuring system (camphorquinone and ethyl 4-dimethylaminebenzoate). The composites were analyzed by environmental scanning electronic microscopy and the water sorption and solubility, compressive strength and elastic modulus were determined. A commercial composite resin [Z100 (3M)] was used to comparison effect. The new composites presented general characteristics similar to the commercial ones; however, they didn t present the properties expected. This behavior was attributed to the lower degree of monomer reaction and to the granulometry and size distribution of the mineral filler in the polymeric matrix

Estudo da viabilidade do processo de reciclagem do material descartado do sistema Zirkonzanh® de produção de próteses dentárias

At present, the material of choice for performing aesthetic dental prosthetic work is in the ceramic. Among them, the ceramic base of stabilized zirconia with 3% yttria (3Y - TZP) stand out for having excellent physical and mechanical properties. During the machining of blocks of zirconia in the laboratory to prepare the various types of prostheses, much of the material is given off in the form of powder, which is subsequently discarded. The waste of this material results in financial loss, reflecting higher final cost treatment for patients, as well as damage to the environment, thanks to the processes involved in the manufacture and disposal of the ceramic. This research, pioneered the recycling of zirconium oxide powder obtained during milling of dental crowns and bridges, we highlight the social and environmental aspects and aims to establish a protocol for the reuse of waste (powder of zirconia Zirkonzahn® system) discarded to obtain a new block of compacted zirconia to maintain the same mechanical and microstructural properties of commercial high-cost imported material. To compare with the commercial material, samples were uniaxially (20 MPa) and isostatically (100 MPa), and its mechanical and microstructural characterization was performed through tests of density, porosity, dilatometry, X-ray diffraction (XRD), hardness, fracture toughness, resistance to fracture electron microscopy (SEM) and analysis of grain size. The results observed in the samples were isostatically pressed similiares those obtained with samples from the commercial material demonstrating the viability of the process

La carta dental como medio probatorio de identificación : Estudio sobre la eficacia del Odontograma a partir de la mayoría de edad

35 p.

Age-Dependent Fragility and Life-Cycle Cost Analysis of Timber and Steel Distribution Poles Subjected to Hurricanes

Power distribution systems are susceptible to extreme damage from natural hazards especially hurricanes. Hurricane winds can knock down distribution poles thereby causing damage to the system and power outages which can result in millions of dollars in lost revenue and restoration costs. Timber has been the dominant material used to support overhead lines in distribution systems. Recently however, utility companies have been searching for a cost-effective alternative to timber poles due to environmental concerns, durability, high cost of maintenance and need for improved aesthetics. Steel has emerged as a viable alternative to timber due to its advantages such as relatively lower maintenance cost, light weight, consistent performance, and invulnerability to wood-pecker attacks. Both timber and steel poles are prone to deterioration over time due to decay in the timber and corrosion of the steel. This research proposes a framework for conducting fragility analysis of timber and steel poles subjected to hurricane winds considering deterioration of the poles over time. Monte Carlo simulation was used to develop the fragility curves considering uncertainties in strength, geometry and wind loads. A framework for life-cycle cost analysis is also proposed to compare the steel and timber poles. The results show that steel poles can have superior reliability and lower life-cycle cost compared to timber poles, which makes them suitable substitutes.

Interventions for nurses caring for a child who has an unexpected acute life threatening event (ALTE) in hospital

Introduction: Caring for a child who has an unexpected ALTE in hospital can be stressful. An ALTE may include a cardiac arrest, respiratory arrest or call for immediate assistance. An international survey of practice was conducted to identify any existing interventions to inform a PhD program of work aimed at reducing the stress from these events through preparation and support. Purpose: The purpose of the survey was threefold: (1) Describe ‘normal’ practice when it comes to preparing staff or providing psychological support after caring for a child who has had an ALTE. (2) Determine if there are any interventions to prepare clinical staff for potential psychological effects of caring for a child who has an ALTE. (3) Determine if there are any interventions to provide support for clinical staff after caring for a child who has an ALTE. Material - Methods: An 18 item semi structured questionnaire was designed for the study to allow respondent to describe practices within their institution and outline their opinions and professional experiences. Clinicians from selected children’s and adult hospitals in Australia, Canada, New Zealand, United Kingdom and the United States of America were contacted by telephone. Following consent they were given the option to complete the survey via the telephone, by post or online. Results: Of the 61 hospitals approached 44 (72%) clinicians responded. Eighteen (41%) respondents identified interventions in place to prepare nurses for an ALTE ranging from (but not limited to) ad hoc discussions during life support training through to structured simulation training. Thirty-six (82%) respondents identified that they had interventions in place to support nurses after an ALTE ranging from (but not limited to) debriefing through to structured case reviews. Conclusions: Interventions varied across institutions, with no outcome or evaluation data for the interventions published to date.

Energy harvesting for monitoring bridges over their operational life

The use of energy harvesting materials for large infrastructure is a promising and growing field. In this regard, the use of such harvesters for the purpose of structural health monitoring of bridges has been proposed in recent times as one of the feasible options since the deployment of them can remove the necessity of an external power source. This paper addresses the performance issue of such monitors over the life-cycle of a bridge as it deteriorates and the live load on the structure increases. In this regard, a Lead Zirconate Titanate (PZT) material is considered as the energy harvesting material and a comparison is carried out over the operational life of a reinforced concrete bridge. The evolution of annual average daily traffic (AADT) is taken into consideration, as is the degradation of the structure over time, due to the effects of corrosion. Evolution of such harvested energy is estimated over the life-cycle of the bridge and the sensitivity of harvested energy is investigated for varying rates of degradation and changes in AADT. The study allows for designing and understanding the potential of energy harvesters as a health monitor for bridges. This paper also illustrates how the natural growth of traffic on a bridge over time can accentuate the identification of damage, which is desirable for an ageing structure. The paper also assesses the impact and effects of deployment of harvesters in a bridge as a part of its design process, considering performance over the entire life-cycle versus a deployment at a certain age of the structure.

Oral Administration of Lactobacillus reuteri during the First Year of Life Reduces Caries Prevalence in the Primary Dentition at 9 Years of Age

The aim of this study was to evaluate the effect on oral health, at age 9 years, of daily oral supplementation with the probiotic Lactobacillus reuteri, strain ATCC 55730, to mothers during the last month of gestation and to children through the first year of life. The study was a single-blind, placebo-controlled, multicenter trial involving 113 children: 60 in the probiotic and 53 in the placebo group. The subjects underwent clinical and radiographic examination of the primary dentition and carious lesions, plaque and gingivitis were recorded. Saliva and plaque were sampled for determination of mutans streptococci (MS) and lactobacilli (LB) in saliva and plaque as well as salivary secretory IgA (SIgA). Forty-nine (82%) children in the probiotic group and 31 (58%) in the placebo group were caries-free (p < 0.01). The prevalence of approximal caries lesions was lower in the probiotic group (0.67 ± 1.61 vs. 1.53 ± 2.64; p < 0.05) and there were fewer sites with gingivitis compared to the placebo group (p < 0.05). There were no significant differences between the groups with respect to frequency of toothbrushing, plaque and dietary habits, but to intake of fluoride supplements (p < 0.05). There were no intergroup differences with respect to L. reuteri, MS, LB or SIgA in saliva. Within the limitation of this study it seems that daily supplementation with L. reuteri from birth and during the first year of life is associated with reduced caries prevalence and gingivitis score in the primary dentition at 9 years of age.