Situação epidemiológica da brucelose bovina no Estado do Espírito Santo

Realizou-se um estudo para caracterizar a situação epidemiológica da brucelose bovina no Estado do Espírito Santo. O Estado foi dividido em dois circuitos produtores. Em cada circuito foram amostradas aleatoriamente cerca de 300 propriedades e, dentro dessas, foi escolhido de forma aleatória um número pré-estabelecido de animais, dos quais foi obtida uma amostra de sangue. No total, foram amostrados 5.351 animais, provenientes de 622 propriedades. Em cada propriedade amostrada foi aplicado um questionário epidemiológico para verificar o tipo de exploração e as práticas de criação e sanitárias que poderiam estar associadas ao risco de infecção pela doença. O protocolo de testes utilizado foi o da triagem com o teste do antígeno acidificado tamponado e o reteste dos positivos com o teste do 2-mercaptoetanol. O rebanho foi considerado positivo quando pelo menos um animal foi reagente às duas provas sorológicas. Para o Estado, as prevalências de focos e de animais infectados foram, respectivamente, de 9,0% [7,0-11,6%] e 3,5% [1,9-6,4%]. Para os circuitos, as prevalências de focos e de animais infectados foram, respectivamente, de: circuito 1, 6,8% [4,5-10,2%] e 3,4% [1,3-8,6%]; circuito 2, 10,9% [7,9%-14,8%] e 3,7% [2,1-6,3%]. Os fatores de risco (odds ratio, OR) associados à condição de foco foram: utilização de inseminação artificial (OR = 7,05 [2,51-19,82]) e confinamento/semiconfinamento dos animais (OR = 2,98 [1,22-7,26]). A vacinação de fêmeas entre três e oito meses de idade foi um fator protetor (OR = 0,03 [0,01-0,1]).

Situação epidemiológica da brucelose bovina no Estado da Bahia

O trabalho consistiu em estratificar o Estado da Bahia em quatro regiões com características homogêneas (circuitos produtores) para que fossem amostradas aleatoriamente, em cada uma delas, 300 propriedades. Em cada propriedade foram escolhidas, de forma aleatória, 10 a 15 fêmeas bovinas adultas, das quais foi obtida uma amostra de sangue. No total, foram amostrados 10.816 animais, provenientes de 1.413 propriedades. O protocolo de testes utilizado foi o da triagem com o teste do antígeno acidificado tamponado (Rosa Bengala) e a confirmação dos positivos com o teste do 2-mercaptoetanol. O rebanho foi considerado positivo se pelo menos um animal reagiu às duas provas sorológicas. As prevalências de focos e a de fêmeas adultas soropositivas do Estado foram de 4,2% [3,1-5,3%] e 0,66% [0,41-0,93%], respectivamente. Para os circuitos produtores foram: circuito 1, 5,8% [3,6-8,7%] e 0,86% [0,41-1,3%]; circuito 2, 3,1% [1,5-5,6%] e 1,2% [0,25-2,1%]; circuito 3, 6,3% [4,0-9,3%] e 1,7% [0,66-2,7%]; e circuito 4, 0,60% [0,07-2,2%] e 0,07 [0,00-0,21%]. Para a análise de fatores de riscos associados à doença foi aplicado um questionário epidemiológico em cada propriedade visitada. Os fatores de risco (odds ratio, OR) associados à condição de foco foram: compra de reprodutores (OR= 2,27) e presença de áreas alagadiças (OR= 1,76). A vacinação de fêmeas de três até oito meses de idade foi um fator de proteção (OR= 0,53).

Sistemas informatizados de registro de imunização: uma revisão com enfoque na saúde infantil

São apresentadas diferentes experiências e metodologias empregadas por registros informatizados de imunização (RII), no enfoque da saúde infantil. O levantamento bibliográfico abrangeu publicações de 1990 a 2006, existentes nas bases MEDLINE, SciELO, PubMed e EMBASE. Outros sítios eletrônicos de organizações nacionais e internacionais de saúde foram pesquisados. Em virtude da ausência de publicações sobre RII no Brasil, as fontes de informação foram a Coordenação Nacional e as Coordenações Estaduais do Programa Nacional de Imunizações, além do Departamento de Informática do Sistema Único de Saúde. Selecionaram-se apenas artigos que abordam RII em saúde infantil. Foram localizados 109 artigos publicados em 35 revistas especializadas. São apresentados aspectos históricos e conceituais, objetivos, funções, relevância e indicadores de desempenho e de custo-efetividade, além das próprias limitações dos RII, assim como experiências em países selecionados, inclusive no Brasil. Os RII integrados a outros sistemas de informação vêm sendo aplicados como importante instrumento para a identificação de populações com menor acesso ou adesão aos programas de vacinação e em sistemas de vigilância ativa de eventos adversos pós-vacina

Barreiras às intervenções relacionadas à saúde do trabalhador do setor saúde no Brasil

OBJETIVO: Identificar na literatura situações que possam impedir ou prejudicar as ações de prevenção de acidentes e doenças ou de promoção da saúde de trabalhadores do setor saúde. MÉTODO: Foi realizada uma revisão da literatura utilizando a base SciELO para o período de 1967 a 2008, complementada por busca na base PubMed para o período de 1950 a 2008. Os seguintes termos foram utilizados para identificar artigos em português, inglês e espanhol: trabalho, trabalhador, ocupacional, riscos, doenças, ergonomia, capacidade para o trabalho, qualidade de vida, organização, acidentes, condições de trabalho, intervenção e administração. Foram selecionados artigos sobre prevenção de doenças e acidentes e sobre promoção da saúde no trabalho em serviços de saúde latino-americanos. Também foram selecionados artigos sobre intervenções em ambientes de trabalho no setor saúde. RESULTADOS: Foram identificadas as seguintes situações desfavoráveis: programas de intervenção sem boa base teórica e não integrados à gestão do serviço como um todo; falhas em avaliar a eficácia das intervenções; vigilância da saúde restrita a doenças e agravos específicos; falta de compromisso da gestão com as intervenções; falhas na comunicação; falta de participação e controle por parte dos trabalhadores sobre o ambiente de trabalho; e programas e intervenções baseados exclusivamente na mudança comportamental dos trabalhadores. CONCLUSÕES: A literatura mostra que todas as barreiras citadas afetam tanto a melhoria do estado de saúde dos trabalhadores em saúde quanto a sua capacidade para o trabalho

The MX2 macromolecular crystallography beamline: a wiggler X-ray source at the LNLS

The Brazilian Synchrotron Light Laboratory [Laboratorio Nacional de Luz Sincrotron (LNLS), Campinas, SP, Brazil] is the first commissioned synchrotron light source in the southern hemisphere. The first wiggler macromolecular crystallography beamline (MX2) at the LNLS has been recently constructed and brought into operation. Here the technical design, experimental set-up, parameters of the beamline and the first experimental results obtained at MX2 are described. The beamline operates on a 2.0 T hybrid 30-pole wiggler, and its optical layout includes collimating mirror, Si( 111) double-crystal monochromator and toroidal bendable mirror. The measured flux density at the sample position at 8.7 eV reaches 4.8 x 10(11) photons s(-1) mm(-2) (100 mA)(-1). The beamline is equipped with a MarResearch Desktop Beamline Goniostat (MarDTB) and 3 x 3 MarMosaic225 CCD detector, and is controlled by a customized version of the Blu-Ice software. A description of the first X-ray diffraction data sets collected at the MX2 LNLS beamline and used for macromolecular crystal structure solution is also provided.

Rapid prototyping of polymeric electrophoresis microchips with integrated copper electrodes for contactless conductivity detection

A simple and easy approach to produce polymeric microchips with integrated copper electrodes for capacitively coupled contactless conductivity detection (CD) is described. Copper electrodes were fabricated using a printed circuit board (PCB) as an inexpensive thin-layer of metal. The electrode layout was first drawn and laser printed on a wax paper sheet. The toner layer deposited on the paper sheet was thermally transferred to the PCB surface working as a mask for wet chemical etching of the copper layer. After the etching step, the toner was removed with an acetonitrile-dampened cotton. A poly(ethylene terephthalate) (PET) film coated with a thin thermo-sensitive adhesive layer was used to laminate the PCB plate providing an insulator layer of the electrodes to perform CID measurements. Electrophoresis microchannels were fabricated in poly(dimethylsiloxane) (PDMS) by soft lithography and reversibly sealed against the PET film. These hybrid PDMS/PET chips exhibited a stable electroosmotic mobility of 4.25 +/- 0.04 x 10(-4) V cm(-2) s(-1), at pH 6.1, over fifty runs. Efficiencies ranging from 1127 to 1690 theoretical plates were obtained for inorganic cations.

A small area 8 bits 50 MHz CMOS DAC for Bluetooth transmitter

This paper presents a small-area CMOS current-steering segmented digital-to-analog converter (DAC) design intended for RF transmitters in 2.45 GHz Bluetooth applications. The current-source design strategy is based on an iterative scheme whose variables are adjusted in a simple way, minimizing the area and the power consumption, and meeting the design specifications. A theoretical analysis of static-dynamic requirements and a new layout strategy to attain a small-area current-steering DAC are included. The DAC was designed and implemented in 0.35 mu m CMOS technology, requiring an active area of just 200 mu m x 200 mu m. Experimental results, with a full-scale output current of 700 mu A and a 3.3 V power supply, showed a spurious-free dynamic range of 58 dB for a 1 MHz output sine wave and sampling frequency of 50 MHz, with differential and integral nonlinearity of 0.3 and 0.37 LSB, respectively.

Visual Display Height

We examined the influence of backrest inclination and vergence demand on the posture and gaze angle that-workers adopt to view visual targets placed in different vertical locations. In the study 12 participants viewed a small video monitor placed in 7 locations around a 0.65-m radius arc (from 650 below to 300 above horizontal eye height). Trunk posture was manipulated by changing the backrest inclination of an adjustable chair. Vergence demand was manipulated by using ophthalmic lenses and prisms to mimic the visual consequences of varying target distance. Changes in vertical target location caused large changes in atlantooccipital posture and gaze angle. Cervical posture was altered to a lesser extent by changes in vertical target location. Participants compensated for changes in backrest inclination by changing cervical posture, though they did not significantly alter atlanto-occipital posture and gaze angle. The posture adopted to view any target represents a compromise between visual and musculoskeletal demands. These results provide support for the argument that the optimal location of visual targets is at least 15 below horizontal eye level. Actual or potential applications of this work include the layout of computer workstations and the viewing of displays from a seated posture.

Scalable Visualization of Galaxies, Oceans, and Brains

One of the challenges in scientific visualization is to generate software libraries suitable for the large-scale data emerging from tera-scale simulations and instruments. We describe the efforts currently under way at SDSC and NPACI to address these challenges. The scope of the SDSC project spans data handling, graphics, visualization, and scientific application domains. Components of the research focus on the following areas: intelligent data storage, layout and handling, using an associated “Floor-Plan” (meta data); performance optimization on parallel architectures; extension of SDSC’s scalable, parallel, direct volume renderer to allow perspective viewing; and interactive rendering of fractional images (“imagelets”), which facilitates the examination of large datasets. These concepts are coordinated within a data-visualization pipeline, which operates on component data blocks sized to fit within the available computing resources. A key feature of the scheme is that the meta data, which tag the data blocks, can be propagated and applied consistently. This is possible at the disk level, in distributing the computations across parallel processors; in “imagelet” composition; and in feature tagging. The work reflects the emerging challenges and opportunities presented by the ongoing progress in high-performance computing (HPC) and the deployment of the data, computational, and visualization Grids.

Content and context of monocular regions determine perceived depth in random dot, unpaired background and phantom stereograms

Perceived depth was measured for three-types of stereograms with the colour/texture of half-occluded (monocular) regions either similar to or dissimilar to that of binocular regions or background. In a two-panel random dot stereogram the monocular region was filled with texture either similar or different to the far panel or left blank. In unpaired background stereograms the monocular region either matched the background or was different in colour or texture and in phantom stereograms the monocular region matched the partially occluded object or was a different colour or texture. In all three cases depth was considerably impaired when the monocular texture did not match either the background or the more distant surface. The content and context of monocular regions as well as their position are important in determining their role as occlusion cues and thus in three-dimensional layout. We compare coincidence and accidental view accounts of these effects. (C) 2002 Elsevier Science Ltd. All rights reserved.

The acquisition of movement skills: Practice enhances the dynamic stability of bimanual coordination

During bimanual movements, two relatively stable inherent patterns of coordination (in-phase and anti-phase) are displayed (e.g., Kelso, Am. J. Physiol. 246 (1984) R1000). Recent research has shown that new patterns of coordination can be learned. For example, following practice a 90 degrees out-of-phase pattern can emerge as an additional, relatively stable, state (e.g., Zanone & Kelso, J. Exp. Psychol.: Human Performance and Perception 18 (1992) 403). On this basis, it has been concluded that practice leads to the evolution and stabilisation of the newly learned pattern and that this process of learning changes the entire attractor layout of the dynamic system. A general feature of such research has been to observe the changes of the targeted pattern's stability characteristics during training at a single movement frequency. The present study was designed to examine how practice affects the maintenance of a coordinated pattern as the movement frequency is scaled. Eleven volunteers were asked to perform a bimanual forearm pronation-supination task. Time to transition onset was used as an index of the subjects' ability to maintain two symmetrically opposite coordinated patterns (target task - 90 degrees out-of-phase - transfer task - 270 degrees out-of-phase). Their ability to maintain the target task and the transfer task were examined again after five practice sessions each consisting of 15 trials of only the 90 degrees out-of-phase pattern. Concurrent performance feedback (a Lissajous figure) was available to the participants during each practice trial. A comparison of the time to transition onset showed that the target task was more stable after practice (p = 0.025). These changes were still observed one week (p = 0.05) and two months (p = 0.075) after the practice period. Changes in the stability of the transfer task were not observed until two months after practice (p = 0.025). Notably, following practice, transitions from the 90 degrees pattern were generally to the anti-phase (180 degrees) pattern, whereas, transitions from the 270 degrees pattern were to the 90 degrees pattern. These results suggest that practice does improve the stability of a 90 degrees pattern, and that such improvements are transferable to the performance of the unpractised 270 degrees pattern. In addition, the anti-phase pattern remained more stable than the practised 90 degrees pattern throughout. (C) 2001 Elsevier Science B.V. All rights reserved.

Ar-40/-Ar-39 geochronology at the Instituto de Geociencias, USP: instrumentation, analytical procedures, and calibration

Laser heating Ar-40/Ar-39 geochronology provides high analytical precision and accuracy, mum-scale spatial resolution. and statistically significant data sets for the study of geological and planetary processes, A newly commissioned Ar-40/Ar-39 laboratory at CPGeo/USP, Sao Paulo, Brazil, equips the Brazilian scientific community with a new powerful tool applicable to the study of geological and cosmochemical processes. Detailed information about laboratory layout, environmental conditions, and instrumentation provides the necessary parameters for the evaluation of the CPGeo/USp Ar-40/Ar-39 suitability to a diverse range of applications. Details about analytical procedures, including mineral separation, irradiation at the IPEN/CNEN reactor at USP, and mass spectrometric analysis enable potential researchers to design the necessary sampling and sample preparation program suitable to the objectives of their study. Finally, the results of calibration tests using Ca and K salts and glasses, international mineral standards, and in-house mineral standards show that the accuracy and precision obtained at the Ar-40/Ar-39 laboratory at CPGeo/USP are comparable to results obtained in the most respected laboratories internationally. The extensive calibration and standardization procedures under-taken ensure that the results of analytical studies carried out in our laboratories will gain immediate international credibility, enabling Brazilian students and scientists to conduct forefront research in earth and planetary sciences.

Effect of cold wire inclination on temperature fluctuation measurements in a heated jet

Hot-wire anemometers at low operating currents are used as fast response resistance thermometers for the study of heated turbulent flows. Simultaneous measurement of temperature and velocity is generally performed with multi-wire arrays. In order to give good spatial resolution a new layout has been tested which uses an inclined temperature wire positioned parallel to the nearest inclined velocity wire. This leads to an asymmetric wire arrangement relative to the mean flow direction. As expected, a reduction in thermal interference from the velocity wires results when compared with an array containing a temperature wire placed normal to the flow. However, measurement of higher order moments of fluctuating quantities in an axisymmetric jet shows considerable distortion of radial distributions which is traced to alteration of the temperature field sensed by the temperature wire. When inclined velocity sensitive wires contain a temperature component, the latter may be affected by the same phenomenon.

Mapping the royal road and other hierarchical functions

In this paper we present a technique for visualising hierarchical and symmetric, multimodal fitness functions that have been investigated in the evolutionary computation literature. The focus of this technique is on landscapes in moderate-dimensional, binary spaces (i.e., fitness functions defined over {0, 1}(n), for n less than or equal to 16). The visualisation approach involves an unfolding of the hyperspace into a two-dimensional graph, whose layout represents the topology of the space using a recursive relationship, and whose shading defines the shape of the cost surface defined on the space. Using this technique we present case-study explorations of three fitness functions: royal road, hierarchical-if-and-only-if (H-IFF), and hierarchically decomposable functions (HDF). The visualisation approach provides an insight into the properties of these functions, particularly with respect to the size and shape of the basins of attraction around each of the local optima.