Futures of work and skills: some foresight exercises in Europe and USA

The Knowledge-based society brought a new way of living and working. The increasing decline of work in primary sector and traditional industries, related with the significant increase of employment in the service sector and in the knowledge work, changed the way companies and individuals establish their relations, the way work and life is organised. These changes are usual and fast and so the feeling of insecurity and unpredictability become more and more sharp. In this context, foresight exercises are necessary tools helping in the identification of the key variables and main trends of evolution. This report will present some foresight studies about work and skills in Europe and USA, in order to contribute to think about possible evolutions and trends.

Real time fault injection using enhanced OCD -- a performance analysis

Fault injection is frequently used for the verification and validation of dependable systems. When targeting real time microprocessor based systems the process becomes significantly more complex. This paper proposes two complementary solutions to improve real time fault injection campaign execution, both in terms of performance and capabilities. The methodology is based on the use of the on-chip debug mechanisms present in modern electronic devices. The main objective is the injection of faults in microprocessor memory elements with minimum delay and intrusiveness. Different configurations were implemented and compared in terms of performance gain and logic overhead.

Using NEXUS compliant debuggers for real time fault injection on microprocessors

As electronic devices get smaller and more complex, dependability assurance is becoming fundamental for many mission critical computer based systems. This paper presents a case study on the possibility of using the on-chip debug infrastructures present in most current microprocessors to execute real time fault injection campaigns. The proposed methodology is based on a debugger customized for fault injection and designed for maximum flexibility, and consists of injecting bit-flip type faults on memory elements without modifying or halting the target application. The debugger design is easily portable and applicable to different architectures, providing a flexible and efficient mechanism for verifying and validating fault tolerant components.

Real-time fault injection using enhanced on-chip debug infrastructures

The rapid increase in the use of microprocessor-based systems in critical areas, where failures imply risks to human lives, to the environment or to expensive equipment, significantly increased the need for dependable systems, able to detect, tolerate and eventually correct faults. The verification and validation of such systems is frequently performed via fault injection, using various forms and techniques. However, as electronic devices get smaller and more complex, controllability and observability issues, and sometimes real time constraints, make it harder to apply most conventional fault injection techniques. This paper proposes a fault injection environment and a scalable methodology to assist the execution of real-time fault injection campaigns, providing enhanced performance and capabilities. Our proposed solutions are based on the use of common and customized on-chip debug (OCD) mechanisms, present in many modern electronic devices, with the main objective of enabling the insertion of faults in microprocessor memory elements with minimum delay and intrusiveness. Different configurations were implemented starting from basic Components Off-The-Shelf (COTS) microprocessors, equipped with real-time OCD infrastructures, to improved solutions based on modified interfaces, and dedicated OCD circuitry that enhance fault injection capabilities and performance. All methodologies and configurations were evaluated and compared concerning performance gain and silicon overhead.

Learning in higher education: strategies to overcome challenges faced by adult students – lessons drawn from two case studies in Portugal

This paper appears in International Journal of Information and Communication Technology Education edited by Lawrence A. Tomei (Ed.) Copyright 2007, IGI Global, www.igi-global.com. Posted by permission of the publisher. URL:http://www.idea-group.com/journals/details.asp?id=4287.

ESEIG Mobile: an m-learning approach in a superior school

In recent years, mobile learning has emerged as an educational approach to decrease the limitation of learning location and adapt the teaching-learning process to all type of students. However, the large number and variety of Web-enabled devices poses challenges for Web content creators who want to automatic get the delivery context and adapt the content to mobile devices. This paper studies several approaches to adapt the learning content to mobile phones. It presents an architecture for deliver uniform m-Learning content to students in a higher School. The system development is organized in two phases: firstly enabling the educational content to mobile devices and then adapting it to all the heterogeneous mobile platforms. With this approach, Web authors will not need to create specialized pages for each kind of device, since the content is automatically transformed to adapt to any mobile device capabilities from WAP to XHTML MP-compliant devices.

A calculus for modeling and analyzing conversations in service-oriented computing

Dissertação apresentada para a obtenção do Grau de Doutor em Informática pela Universidade Nova de Lisboa, Faculdade de Ciências e Tecnologia

From the Lisbon strategy to EU2020: illusion or progress for european economies?

To be published at Krings, Bettina-J. ed. (2011), Brain Drain or Brain Gain? Changes of Work in Knowledge-based Societies, Berlin, Ed. Sigma. The author wants to thanks the comments and suggestions from Bettina Krings and Sylke Wintzer. They are not, however, responsible for the final result.

How composite indicators of innovation can influence technology policy decision?

Based on the report for Project III of the PhD programme on Technology Assessment and prepared for the Winter School that took place at Universidade Nova de Lisboa, Caparica Campus on the 6th and 7th of December 2010.

TSKY: a dependable middleware solution for data privacy using public storage clouds

Dissertação para obtenção do Grau de Mestre em Engenharia Informática

Dynamic adaptation of interaction models for stateful web services

Dissertação para obtenção do Grau de Mestre em Engenharia Informática

Brucelose na Província do Namibe, Angola, 2012 : prevalências humana (profissionais da pecuária) e animal, factores de risco, conhecimento e práticas

RESUMO - Enquadramento: A Brucelose é uma antropozoonose prevalente no Mundo e é uma das mais negligenciadas. A sua transmissão ao ser humano é directa e indirecta, e acontece por via de contacto com animal infectado, o consumo de leite e seus derivados não pasteurizados e a não observância de uso de equipamentos de protecção individual e colectiva, entre outros factores. O conhecimento da prevalência e incidência da brucelose animal e humana no Namibe, uma província de Angola, é muito escasso sendo poucos os estudos que evidenciam esta doença no seio dos profissionais da pecuária expostos: trabalhadores de matadouros, veterinários e criadores de gado. É assim pertinente, com base em estudos científicos específicos, caracterizar esta situação. Objectivos: Caracterizar os ambientes dos profissionais (matadouro, talhos e salas municipais de abate e explorações); estimar a seroprevalência da brucelose humana em profissionais da pecuária (trabalhadores de matadouros e criadores de gado bovino) na província do Namibe, Angola em 2012; determinar a associação da presença da brucelose humana com variáveis sócio-demográficas, de conhecimento, de práticas e de características das explorações; determinar a prevalência da Brucelose em animais e em explorações; caracterizar os factores associados à presença da Brucelose em explorações bovinas; caracterizar o conhecimento e práticas sobre a Brucelose dos profissionais da pecuária e analisar a relação entre as prevalências nas explorações (infectadas versus não infectadas) e nos criadores (infectados versus não infectados). Métodos e materiais: estudos observacional e transversal seroepidemiológico em 131 trabalhadores de talhos, salas de abate e matadouro e 192 criadores amostrados aleatoriamente em toda província do Namibe. Os dados foram obtidos através da colheita de sangue e da aplicação de um questionário. Os testes laboratoriais utilizados foram o Rosa de Bengala (RBT) e a Aglutinação Lenta em Tubos (SAT). O estudo de conhecimento foi principalmente centrado na pergunta “Já ouviu falar de Brucelose” e nas questões relativas ao nível de conhecimento e práticas (indicadores baseados nas percentagens de respostas correctas ou práticas adequadas) dos factores de risco da Brucelose. Também foram investigados 1344 animais (em 192 explorações) com recurso ao método de diagnóstico laboratorial RBT para análise de soro sanguíneo e, complementarmente, foi aplicado um questionário aos respectivos criadores. Em termos de análise estatística, para além da abordagem descritiva, foram utilizados os testes de Independência do Quiquadrado, Fisher, Teste não paramétrico de Mann-Whitney, Teste de correlação de Spearman. Adicionalmente, com base em modelos de regressão logística, foram determinados odds ratio e os respectivos intervalos de confiança utilizando um nível de significância de 5%. Resultados: os ambientes dos profissionais (matadouro, talhos e salas municipais de abate e explorações) não reuniram as condições higio-sanitárias definidas internacionalmente como adequadas. Nos profissionais a infecção geral ponderada da Brucelose foi de 15.56% (IC95% : 13.61-17.50), sendo 5.34% em trabalhadores e 16.66% (IC95% : 11.39-21.93) em criadores. A significância estatística foi observada entre a seroprevalência humana e a categoria (trabalhador e criador) (p< 0.001) e o nível de instrução (p= 0.032), início de actividade (p= 0.079) e local de serviço (p= 0.055). Num contexto multivariado o factor positivamente associado à brucelose em profissionais foi a categoria profissional (OR = 3.54, IC95%: 1.57-8.30, relativo aos criadores em relação a trabalhadores). As taxas gerais aparentes de prevalência em animais e explorações foram respectivamente de 14.96% (IC 95%, 12.97-17.19) e de 40.10% (IC 95%, 32.75-47.93). Encontrou-se uma correlação positiva moderada entre o número de animais infectados por exploração com a média do número de abortos na exploração = 0.531, p< 0.001). Em média os profissionais tiveram um conhecimento global muito insuficiente (16.1%), tendo os trabalhadores apresentado valores mais elevados que os criadores (20.2% e 13.8%), diferença não estatisticamente significativa (p= 0.170). As perguntas “o leite in natura é fervido antes do consumo humano?”, “contacto com materiais fetais animais?”, “contacto com aerossóis no local de trabalho?” e “já fez alguma vez o teste de Brucelose humana?” (relacionadas com práticas) e as perguntas “já ouviu falar da Brucelose?”, “Brucelose é doença zoonótica/só animal/só humana? e “como a Brucelose se transmite aos humanos?” apresentaram níveis médios de práticas adequadas e conhecimentos correctos inferiores a 20%. Nas explorações infectadas, 39% dos criadores foram positivos (infectados) e nas não infectadas apenas 1.7%. O risco de um criador ser infectado estando numa exploração infectada foi significativamente mais elevado (OR= 36, IC95%: 8.28-157.04). Conclusões: os ambientes dos profissionais (matadouros, salas municipais de abate e talhos e explorações) propiciam o risco à brucelose. O estudo permite aferir que a Brucelose humana em profissionais da pecuária e a Brucelose animal são prevalentes na província do Namibe. Os níveis de seroprevalência detectados são elevados comparandoos com outros encontrados em algumas localidades africanas que possuem condições similares às do Namibe. Perto de duas em cada cinco (40.10%) explorações estão infectadas por esta doença. O número de abortos (média) está claramente relacionado com as explorações infectadas. O conhecimento geral dos profissionais da pecuária sobre a Brucelose é muito insuficiente, tendo os trabalhadores mostrado um maior conhecimento em relação aos criadores, mas ambos com níveis alarmantes. Os criadores infectados estão relacionados com as explorações infectadas. Há necessidade de controlar a doença e de informar e educar os profissionais sobre a brucelose, sendo fundamental que os serviços provinciais de veterinária reforcem acções de divulgação e de fiscalização.

Decisions of technology innovation: the role of indicators

This work presents research conducted to understand the role of indicators in decisions of technology innovation. A gap was detected in the literature of innovation and technology assessment about the use and influence of indicators in this type of decision. It was important to address this gap because indicators are often frequent elements of innovation and technology assessment studies. The research was designed to determine the extent of the use and influence of indicators in decisions of technology innovation, to characterize the role of indicators in these decisions, and to understand how indicators are used in these decisions. The latter involved the test of four possible explanatory factors: the type and phase of decision, and the context and process of construction of evidence. Furthermore, it focused on three Portuguese innovation groups: public researchers, business R&D&I leaders and policymakers. The research used a combination of methods to collect quantitative and qualitative information, such as surveys, case studies and social network analysis. This research concluded that the use of indicators is different from their influence in decisions of technology innovation. In fact, there is a high use of indicators in these decisions, but lower and differentiated differences in their influence in each innovation group. This suggests that political-behavioural methods are also involved in the decisions to different degrees. The main social influences in the decisions came mostly from hierarchies, knowledge-based contacts and users. Furthermore, the research established that indicators played mostly symbolic roles in decisions of policymakers and business R&D&I leaders, although their role with researchers was more differentiated. Indicators were also described as helpful instruments to conduct a reasonable interpretation of data and to balance options in innovation and technology assessments studies, in particular when contextualised, described in detail and with discussion upon the options made. Results suggest that there are four main explanatory factors for the role of indicators in these decisions: First, the type of decision appears to be a factor to consider when explaining the role of indicators. In fact, each type of decision had different influences on the way indicators are used, and each type of decision used different types of indicators. Results for policy-making were particularly different from decisions of acquisition and development of products/technology. Second, the phase of the decision can help to understand the role indicators play in these decisions. Results distinguished between two phases detected in all decisions – before and after the decision – as well as two other phases that can be used to complement the decision process and where indicators can be involved. Third, the context of decision is an important factor to consider when explaining the way indicators are taken into consideration in policy decisions. In fact, the role of indicators can be influenced by the particular context of the decision maker, in which all types of evidence can be selected or downplayed. More importantly, the use of persuasive analytical evidence appears to be related with the dispute existent in the policy context. Fourth and last, the process of construction of evidence is a factor to consider when explaining the way indicators are involved in these decisions. In fact, indicators and other evidence were brought to the decision processes according to their availability and capacity to support the different arguments and interests of the actors and stakeholders. In one case, an indicator lost much persuasion strength with the controversies that it went through during the decision process. Therefore, it can be argued that the use of indicators is high but not very influential; their role is mostly symbolic to policymakers and business decisions, but varies among researchers. The role of indicators in these decisions depends on the type and phase of the decision and the context and process of construction of evidence. The latter two are related to the particular context of each decision maker, the existence of elements of dispute and controversies that influence the way indicators are introduced in the decision-making process.

STAR: Speech Therapy with Augmented Reality for children with autism spectrum disorders

Graphics based systems of Augmented and Alternative Communication are widely used to promote communication in people with Autism Spectrum Disorders. This study discusses an integration of Augmented Reality in communication interventions, by relating elements of Augmented and Alternative Communication and Applied Behaviour Analysis strategies. An architecture for an Augmented Reality based interactive system to assist interventions is proposed. STAR provides an Augmented Reality tool to assist interventions performed by therapists and support for parents to join in and participate in the child’s intervention. Finally we report on the usage of the Augmented Reality tool in interventions with children with Autism Spectrum Disorders.

Localization in underground tunnels

Positioning technologies are becoming ubiquitous and are being used more and more frequently for supporting a large variety of applica- tions. For outdoor applications, global navigation satellite systems (GNSSs), such as the global positioning system (GPS), are the most common and popular choice because of their wide coverage. GPS is also augmented with network-based systems that exploit existing wireless and mobile networks for providing positioning functions where GPS is not available or to save energy in battery-powered devices. Indoors, GNSSs are not a viable solution, but many applications require very accurate, fast, and exible positioning, tracking, and navigation functions. These and other requirements have stim- ulated research activities, in both industry and academia, where a variety of fundamental principles, techniques, and sensors are being integrated to provide positioning functions to many applications. The large majority of positioning technologies is for indoor environments, and most of the existing commercial products have been developed for use in of ce buildings, airports, shopping malls, factory plants, and similar spaces. There are, however, other spaces where positioning, tracking, and navigation systems play a central role in safety and in rescue operations, as well as in supporting speci c activities or for scienti c research activities in other elds. Among those spaces are underground tunnels, mines, and even underwater wells and caves. This chapter describes the research efforts over the past few years that have been put into the development of positioning systems for underground tun- nels, with particular emphasis in the case of the Large Hadron Collider (LHC) at CERN (the European Organization for Nuclear Research), where localiza- tion aims at enabling more automatic and unmanned radiation surveys. Examples of positioning and localization systems that have been devel- oped in the past few years for underground facilities are presented in the fol- lowing section, together with a brief characterization of those spaces’ special conditions and the requirements of some of the most common applications. Section 5.2 provides a short overview of some of the most representative research efforts that are currently being carried out by many research teams around the world. In addition, some of the fundamental principles and tech- niques are identi ed, such as the use of leaky coaxial cables, as used at the LHC. In Section 5.3, we introduce the speci c environment of the LHC and de ne the positioning requirements for the envisaged application. This is followed by a detailed description of our approach and the results that have been achieved so far. Some last comments and remarks are presented in a nal section.