Improved Methods for Determining Wind Loads on Highway Sign and Traffic-Signal Structures, TR-559, 2007

The main objective of the proposed study is to use Computational Fluid Dynamics (CFD) tools to determine the wind loads by accurate numerical simulations of air flow characteristics around large highway sign structures under severe wind speeds conditions. Fully three-dimensional Reynolds- Averaged Navier-Stokes (RANS) simulations are used to estimate the total force on different panels, as well as the actual pressure distribution on the front and back faces of the panels. In particular, the present study investigates the effects of aspect ratio and sign spacing for regular panels, the effect of sign depth for the dynamic message signs that are now being used on Iowa highways, the effect induced by the presence of back-to-back signs, the effect of the presence of add-on exit signs, and the effect of the presence of trucks underneath the signs potentially creating “wind tunnel” effect.

Wireless Sensor Networks for Infrastructure Monitoring, TR-611, 2010

A good system of preventive bridge maintenance enhances the ability of engineers to manage and monitor bridge conditions, and take proper action at the right time. Traditionally infrastructure inspection is performed via infrequent periodical visual inspection in the field. Wireless sensor technology provides an alternative cost-effective approach for constant monitoring of infrastructures. Scientific data-acquisition systems make reliable structural measurements, even in inaccessible and harsh environments by using wireless sensors. With advances in sensor technology and availability of low cost integrated circuits, a wireless monitoring sensor network has been considered to be the new generation technology for structural health monitoring. The main goal of this project was to implement a wireless sensor network for monitoring the behavior and integrity of highway bridges. At the core of the system is a low-cost, low power wireless strain sensor node whose hardware design is optimized for structural monitoring applications. The key components of the systems are the control unit, sensors, software and communication capability. The extensive information developed for each of these areas has been used to design the system. The performance and reliability of the proposed wireless monitoring system is validated on a 34 feet span composite beam in slab bridge in Black Hawk County, Iowa. The micro strain data is successfully extracted from output-only response collected by the wireless monitoring system. The energy efficiency of the system was investigated to estimate the battery lifetime of the wireless sensor nodes. This report also documents system design, the method used for data acquisition, and system validation and field testing. Recommendations on further implementation of wireless sensor networks for long term monitoring are provided.

Wind Loads on Dynamic Message Cabinets and Behavior of Supporting Trusses, TR-612, 2013

Large Dynamic Message Signs (DMSs) have been increasingly used on freeways, expressways and major arterials to better manage the traffic flow by providing accurate and timely information to drivers. Overhead truss structures are typically employed to support those DMSs allowing them to provide wider display to more lanes. In recent years, there is increasing evidence that the truss structures supporting these large and heavy signs are subjected to much more complex loadings than are typically accounted for in the codified design procedures. Consequently, some of these structures have required frequent inspections, retrofitting, and even premature replacement. Two manufacturing processes are primarily utilized on truss structures - welding and bolting. Recently, cracks at welding toes were reported for the structures employed in some states. Extremely large loads (e.g., due to high winds) could cause brittle fractures, and cyclic vibration (e.g., due to diurnal variation in temperature or due to oscillations in the wind force induced by vortex shedding behind the DMS) may lead to fatigue damage, as these are two major failures for the metallic material. Wind and strain resulting from temperature changes are the main loads that affect the structures during their lifetime. The American Association of State Highway and Transportation Officials (AASHTO) Specification defines the limit loads in dead load, wind load, ice load, and fatigue design for natural wind gust and truck-induced gust. The objectives of this study are to investigate wind and thermal effects in the bridge type overhead DMS truss structures and improve the current design specifications (e.g., for thermal design). In order to accomplish the objective, it is necessary to study structural behavior and detailed strain-stress of the truss structures caused by wind load on the DMS cabinet and thermal load on the truss supporting the DMS cabinet. The study is divided into two parts. The Computational Fluid Dynamics (CFD) component and part of the structural analysis component of the study were conducted at the University of Iowa while the field study and related structural analysis computations were conducted at the Iowa State University. The CFD simulations were used to determine the air-induced forces (wind loads) on the DMS cabinets and the finite element analysis was used to determine the response of the supporting trusses to these pressure forces. The field observation portion consisted of short-term monitoring of several DMS Cabinet/Trusses and long-term monitoring of one DMS Cabinet/Truss. The short-term monitoring was a single (or two) day event in which several message sign panel/trusses were tested. The long-term monitoring field study extended over several months. Analysis of the data focused on trying to identify important behaviors under both ambient and truck induced winds and the effect of daily temperature changes. Results of the CFD investigation, field experiments and structural analysis of the wind induced forces on the DMS cabinets and their effect on the supporting trusses showed that the passage of trucks cannot be responsible for the problems observed to develop at trusses supporting DMS cabinets. Rather the data pointed toward the important effect of the thermal load induced by cyclic (diurnal) variations of the temperature. Thermal influence is not discussed in the specification, either in limit load or fatigue design. Although the frequency of the thermal load is low, results showed that when temperature range is large the restress range would be significant to the structure, especially near welding areas where stress concentrations may occur. Moreover stress amplitude and range are the primary parameters for brittle fracture and fatigue life estimation. Long-term field monitoring of one of the overhead truss structures in Iowa was used as the research baseline to estimate the effects of diurnal temperature changes to fatigue damage. The evaluation of the collected data is an important approach for understanding the structural behavior and for the advancement of future code provisions. Finite element modeling was developed to estimate the strain and stress magnitudes, which were compared with the field monitoring data. Fatigue life of the truss structures was also estimated based on AASHTO specifications and the numerical modeling. The main conclusion of the study is that thermal induced fatigue damage of the truss structures supporting DMS cabinets is likely a significant contributing cause for the cracks observed to develop at such structures. Other probable causes for fatigue damage not investigated in this study are the cyclic oscillations of the total wind load associated with the vortex shedding behind the DMS cabinet at high wind conditions and fabrication tolerances and induced stresses due to fitting of tube to tube connections.

Low-Cost Rural Surface Alternatives: Demonstration Project, TR-664, 2015

The goals of this project were to implement several stabilization methods for preventing or mitigating freeze-thaw damage to granular surfaced roads and identify the most effective and economical methods for the soil and climate conditions of Iowa. Several methods and technologies identified as potentially suitable for Iowa were selected from an extensive analysis of existing literature provided with Iowa Highway Research Board (IHRB) Project TR-632. Using the selected methods, demonstration sections were constructed in Hamilton County on a heavily traveled two-mile section of granular surfaced road that required frequent maintenance during previous thawing periods. Construction procedures and costs of the demonstration sections were documented, and subsequent maintenance requirements were tabulated through two seasonal freeze-thaw periods. Extensive laboratory and field tests were performed prior to construction, as well as before and after the two seasonal freeze-thaw periods, to monitor the performance of the demonstration sections. A weather station was installed at the project site and temperature sensors were embedded in the subgrade to monitor ground temperatures up to a depth of 5 ft and determine the duration and depths of ground freezing and thawing. An economic analysis was performed using the documented construction and maintenance costs, and the estimated cumulative costs per square yard were projected over a 20-year timeframe to determine break-even periods relative to the cost of continuing current maintenance practices. Overall, the sections with biaxial geogrid or macadam base courses had the best observed freeze-thaw performance in this study. These two stabilization methods have larger initial costs and longer break-even periods than aggregate columns, but counties should also weigh the benefits of improved ride quality and savings that these solutions can provide as excellent foundations for future paving or surface upgrades.

Iowa System of Bridge Deck Rehabilitation with Cathodic Protection, HR-1044, 1986

Bridge deck and substructure deterioration due to the corrosive effects of deicing chemicals on reinforcing steel is a problem facing many transportation agencies. The main concern is protection of older bridges with uncoated reinforcing steel. Many different methods have been tried over the past years to repair bridge decks. The Iowa system of bridge deck rehabilitation has proven to be very effective. It consists of scarifying the deck surface, removing any deteriorated concrete, and overlaying with low slump dense concrete. Another rehabilitation method that has emerged is cathodic protection. It has been used for many years in the protection of underground pipelines and in 1973 was first installed on a bridge deck. Cathodic protection works by applying an external source of direct current to the embedded reinforcing steel, thereby changing the electrochemical process of corrosion. The corroding steel, which is anodic, is protected by changing it to a cathodic state. The technology involved in cathodic protection as applied to bridge decks has improved over the last 12 years. One company marketing new technology in cathodic protection systems is Raychem Corporation of Menlo Park, California. Their system utilizes a Ferex anode mesh that distributes the impressed direct current over the deck surface. Ferex mesh was selected because it seemed readily adaptable to the Iowa system of bridge deck rehabilitation. The bridge deck would be scarified, deteriorated concrete removed, Ferex anode mesh installed, and overlaid with low slump dense concrete. The Federal Highway Administration (FHWA) promotes cathodic protection under Demonstration Project No. 34, "Cathodic Protection for Reinforced Concrete Bridge Decks."

Laboratory Investigation of Concrete Beam-End Treatments, RB08-013, 2015

The ends of prestressed concrete beams under expansion joints are often exposed to moisture and chlorides. Left unprotected, the moisture and chlorides come in contact with the ends of the prestressing strands and/or the mild reinforcing, resulting in corrosion. Once deterioration begins, it progresses unless some process is employed to address it. Deterioration can lead to loss of bearing area and therefore a reduction in bridge capacity. Previous research has looked into the use of concrete coatings (silanes, epoxies, fiber-reinforced polymers, etc.) for protecting prestressed concrete beam ends but found that little to no laboratory research has been done related to the performance of these coatings in this specific type of application. The Iowa Department of Transportation (DOT) currently specifies coating the ends of exposed prestressed concrete beams with Sikagard 62 (a high-build, protective, solvent-free, epoxy coating) at the precast plant prior to installation on the bridge. However, no physical testing of Sikagard 62 in this application has been completed. In addition, the Iowa DOT continues to see deterioration in the prestressed concrete beam ends, even those treated with Sikagard 62. The goals of this project were to evaluate the performance of the Iowa DOT-specified beam-end coating as well as other concrete coating alternatives based on the American Association of State Highway and Transportation Officials (AASHTO) T259-80 chloride ion penetration test and to test their performance on in-service bridges throughout the duration of the project. In addition, alternative beam-end forming details were developed and evaluated for their potential to mitigate and/or eliminate the deterioration caused by corrosion of the prestressing strands on prestressed concrete beam ends used in bridges with expansion joints. The alternative beam-end details consisted of individual strand blockouts, an individual blockout for a cluster of strands, dual blockouts for two clusters of strands, and drilling out the strands after they are flush cut. The goal of all of the forming alternatives was to offset the ends of the prestressing strands from the end face of the beam and then cover them with a grout/concrete layer, thereby limiting or eliminating their exposure to moisture and chlorides.

Spontaneous 24-h GHRELIN secretion pattern in fasting subjects : maintenance of a meal-related pattern

RESUME OBJECTIF: Outre la stimulation de la sécrétion d'hormone de croissance, la ghréline cause une prise pondérale par augmentation de l'assimilation d'aliments et réduction de la consommation lipidique. Il a été décrit que les taux de ghréline augmentent durant la phase pré-prandiale et diminuent juste après un repas, ceci suggérant qu'elle puisse jouer un rôle d'initiateur de la prise du repas. Cependant, la sécrétion de ghréline chez des sujets à jeun n'a pas encore été étudiée en détail. DESSIN: Les profils de sécrétion de ghréline pendant 24 heures ont été étudiés chez six sujets volontaires sains (3 femmes, 3 hommes; 25.5 ans; BMI 22.8 kg/m2) et comparés aux profils plasmatiques de l'hormone de croissance, de l'insuline et du glucose. METHODE: Des échantillons sanguins ont été prélevés toutes les 20 minutes pendant 24 heures et les taux de ghréline ont été mesurés par radio-immuno essai, utilisant un anticorps polyclonal de lapin. Le profil circadien de la sécrétion de ghréline (cluster analysis) a été évalué. RESULTATS: Une augmentation puis une diminution spontanée des taux de ghréline ont été observées aux moments où les sujets auraient habituellement mangé. La ghréline a été sécrétée de façon pulsatile avec approximativement 8 pics par 24 heures. Une diminution générale des taux de ghréline a également été observée durant la période d'étude. Aucune corrélation n'a pu être observée entre les taux de ghréline, d'homione de croissance, d'insuline et de glucose. CONCLUSIONS: Cette étude montre que pendant une période de jeûne les taux de ghréline suivent un profil similaire à ceux décrits chez des sujets mangeant 3 fois par jour. Durant le jeûne, l'hormone de croissance, l'insuline et le glucose ne semblent pas être impliqués dans la régulation de la sécrétion de ghréline. En outre, nous avons observé que la sécrétion de ghréline est pulsatile. La variation des taux de ghréline, indépendamment des repas, chez des sujets à jeun, renforce les observations préalables selon lesquelles le système nerveux central est primairement impliqué dans la régulation de la prise alimentaire. ABSTRACT: OBJECTIVE: Ghrelin stimulates GH release and causes weight gain through increased food intake and reduced fat utiIization. Ghrelin levels were shown to rise in the preprandial period and decrease shortly after meal consumption, suggesting a role as a possible meal initiator. However, ghrelin secretion in fasting subjects has not yet been studied in detail. DESIGN: 24-h ghrelin profiles were studied in six healthy volunteers (three females; 25.5 years; body mass index 22.8 kg/m2) and compared with GH, insulin and glucose levels. METHODS: Blood samples were taken every 20 min during a 24-h fasting period and total ghrelin levels were measured by RIA using a polyclonal rabbit antibody. The circadian pattern of ghrelin secretion and pulsatility (Cluster analysis) were evaluated. RESULTS: An increase and spontaneous decrease in ghrelin were seen at the timepoints of customary meals. Ghrelin was secreted in a pulsatile manner with approximately 8 peaks/24 h. An overall decrease in ghrelin levels was observed during the study period. There was no correlation of ghrelin with GH, insulin or blood glucose levels. CONCLUSIONS: This pilot study indicates that fasting ghrelin profiles display a circadian pattern similar to that described in people eating three times per day. In a fasting condition. GH, insulin and glucose do not appear to be involved in ghrelin regulation. In addition, we round that ghrelin is secreted in a pulsatile pattern. The variation in ghrelin independently of meals in fasting subjects supports previous observations that it is the brain that is primarily involved in the regulation of meal initiation.

Scour Around Bridge Piers and Abutments, HR-30 and Iowa Highway Research Board Bulletin No. 4, 1956

Man’s never-ending search for better materials and construction methods and for techniques of analysis and design has overcome most of the early difficulties of bridge building. Scour of the stream bed, however, has remained a major cause of bridge failures ever since man learned to place piers and abutments in the stream in order to cross wide rivers. Considering the overall complexity of field conditions, it is not surprising that no generally accepted principles (not even rules of thumb) for the prediction of scour around bridge piers and abutments have evolved from field experience alone. The flow of individual streams exhibits a manifold variation, and great disparity exists among different rivers. The alignment, cross section, discharge, and slope of a stream must all be correlated with the scour phenomenon, and this in turn must be correlated with the characteristics of the bed material ranging from clays and fine silts to gravels and boulders. Finally, the effect of the shape of the obstruction itself-the pier or abutment-must be assessed. Since several of these factors are likely to vary with time to some degree, and since the scour phenomenon as well is inherently unsteady, sorting out the influence of each of the various factors is virtually impossible from field evidence alone. The experimental approach was chosen as the investigative method for this study, but with due recognition of the importance of field measurements and with the realization that the results must be interpreted so as to be compatible with the present-day theories of fluid mechanics and sediment transportation. This approach was chosen because, on the one hand, the factors affecting the scour phenomenon can be controlled in the laboratory to an extent that is not possible in the field, and, on the other hand, the model technique can be used to circumvent the present inadequate understanding of the phenomenon of the movement of sediment by flowing water. In order to obtain optimum results from the laboratory study, the program was arranged at the outset to include a related set of variables in each of several phases into which the whole problem was divided. The phases thus selected were : 1. Geometry of piers and abutments, 2. Hydraulics of the stream, 3. Characteristics of the sediment, 4. Geometry of channel shape and alignment.

Report on a review of selected general and application controls over the University of Northern Iowa Facility Administration and Maintenance Information System for the period April 29, 2014 through June 5, 2014

Report on a review of selected general and application controls over the University of Northern Iowa Facility Administration and Maintenance Information System for the period April 29, 2014 through June 5, 2014

Iowa Drainage Laws (Annotated), HR-46 and Iowa Highway Research Board Bulletin No. 6, 1957

In the preparation of this compilation of drainage laws of Iowa, an attempt has been made to include those sections of the Code to which reference is frequently required by the State Highway Commission, Boards of Supervisors and County Engineers in the conduct of highway and road administration as it is affected by the Iowa drainage laws. Of necessity some Code provisions which have a bearing on the principal subject were omitted. Enactments of the 56th General Assembly which modify existing code sections have been included as part of the regular text of the Code sections included in this publication. THE USER IS CAUTIONED THAT THESE CODE SECTIONS, AS MODIFIED BY THE 56th GENERAL ASSEMBLY, ARE NOT A PART OF THE 1954 CODE OF IOWA AND ARE OFFICIAL ONLY INSOFAR AS THEY ARE PRINTED IN THE OFFICIAL PUBLICATION ACTS OF THE 56TH GENERAL ASSEMBLY. SINCE THE 57TH GENERAL ASSEMBLY IS IN SESSION DURING THE PRINTING OF THIS PUBLICATION, ENACTMENTS OF THAT BODY WHICH AMEND OR REPEAL SECTIONS SET OUT HEREIN ARE INCLUDED IN THE BACK OF THIS VOLUME ON THE PINK-COLORED PAPER. THE USER IS CAUTIONED IN USING THIS VOLUME TO REFER TO THE TABLE OF SECTIONS REPEALED OR AMENDED, ON THE PINK-COLORED PAPER AT THE BACK OF THIS VOLUME. This publication is offered with the hope and belief that it will prove to be of value and assistance to those concerned with the problems of administering a highway, road and drainage system.

Maintenance of polymorphism : a theoretical approach using multilocus systems

Résumé La thématique de cette thèse peut être résumée par le célèbre paradoxe de biologie évolutive sur le maintien du polymorphisme face à la sélection et par l'équation du changement de fréquence gamétique au cours du temps dû, à la sélection. La fréquence d'un gamète xi à la génération (t + 1) est: !!!Equation tronquée!!! Cette équation est utilisée pour générer des données utlisée tout au long de ce travail pour 2, 3 et 4 locus dialléliques. Le potentiel de l'avantage de l'hétérozygote pour le maintien du polymorphisme est le sujet de la première partie. La définition commune de l'avantage de l'hétérozygote n'etant applicable qu'a un locus ayant 2 allèles, cet avantage est redéfini pour un système multilocus sur les bases de précédentes études. En utilisant 5 définitions différentes de l'avantage de l'hétérozygote, je montre que cet avantage ne peut être un mécanisme général dans le maintien du polymorphisme sous sélection. L'étude de l'influence de locus non-détectés sur les processus évolutifs, seconde partie de cette thèse, est motivée par les travaux moléculaires ayant pour but de découvrir le nombre de locus codant pour un trait. La plupart de ces études sous-estiment le nombre de locus. Je montre que des locus non-détectés augmentent la probabilité d'observer du polymorphisme sous sélection. De plus, les conclusions sur les facteurs de maintien du polymorphisme peuvent être trompeuses si tous les locus ne sont pas détectés. Dans la troisième partie, je m'intéresse à la valeur attendue de variance additive après un goulot d'étranglement pour des traits sélectionés. Une études précédente montre que le niveau de variance additive après goulot d'étranglement augmente avec le nombre de loci. Je montre que le niveau de variance additive après un goulot d'étranglement augmente (comparé à des traits neutres), mais indépendamment du nombre de loci. Par contre, le taux de recombinaison a une forte influence, entre autre en regénérant les gamètes disparus suite au goulot d'étranglement. La dernière partie de ce travail de thèse décrit un programme pour le logiciel de statistique R. Ce programme permet d'itérer l'équation ci-dessus en variant les paramètres de sélection, recombinaison et de taille de populations pour 2, 3 et 4 locus dialléliques. Cette thèse montre qu'utiliser un système multilocus permet d'obtenir des résultats non-conformes à ceux issus de systèmes rnonolocus (la référence en génétique des populations). Ce programme ouvre donc d'intéressantes perspectives en génétique des populations. Abstract The subject of this PhD thesis can be summarized by one famous paradox of evolu-tionary biology: the maintenance of polymorphism in the face of selection, and one classical equation of theoretical population genetics: the changes in gametic frequencies due to selection and recombination. The frequency of gamete xi at generation (t + 1) is given by: !!! Truncated equation!!! This equation is used to generate data on selection at two, three, and four diallelic loci for the different parts of this work. The first part focuses on the potential of heterozygote advantage to maintain genetic polymorphism. Results of previous studies are used to (re)define heterozygote advantage for multilocus systems, since the classical definition is for one diallelic locus. I use 5 different definitions of heterozygote advantage. And for these five definitions, I show that heterozygote advantage is not a general mechanism for the maintenance of polymorphism. The study of the influence of undetected loci on evolutionary processes (second part of this work) is motivated by molecular works which aim at discovering the loci coding for a trait. For most of these works, some coding loci remains undetected. I show that undetected loci increases the probability of maintaining polymorphism under selection. In addition, conclusions about the factor that maintain polymorphism can be misleading if not all loci are considered. This is, therefore, only when all loci are detected that exact conclusions on the level of maintained polymorphism or on the factor(s) that maintain(s) polymorphism could be drawn. In the third part, the focus is on the expected release of additive genetic variance after bottleneck for selected traits. A previous study shows that the expected release of additive variance increases with an increase in the number of loci. I show that the expected release of additive variance after bottleneck increases for selected traits (compared with neutral), but this increase is not a function of the number of loci, but function of the recombination rate. Finally, the last part of this PhD thesis is a description of a package for the statistical software R that implements the Equation given above. It allows to generate data for different scenario regarding selection, recombination, and population size. This package opens perspectives for the theoretical population genetics that mainly focuses on one locus, while this work shows that increasing the number of loci leads not necessarily to straightforward results.

Missouri riverfront parkway & scenic highway design study, 1973.

This report concerns a proposed Parkway and Scenic Highway along both sides of the Missouri River in Harrison, Pottawattamie and Mills County in Iowa and Washington, Douglas and Sarpy Counties in Nebraska. This Parkway will make the Missouri River valley accessible to the public, link existing and planned attractions and facilitate planned development while at the same time preserving for posterity the best of the natural attributes of the area.

Report on Rest Area Water Systems for Interstate Highways, 1967

Introduction: As part of the roadside development along the Interstate Highway System, the Iowa State Highway Commission has constructed eight pair of rest area facilities. Furthermore, two pair are presently under construction with an additional two pair proposed for letting in 1967. An additional nine and one-half pairs of rest areas are in the planning phase, a grand total of 45 rest Brea buildings. The facilities existing were planned and designed in a relatively short period of time. The rest area facilities are unusual in terms of water use, water demand rates, and the fact that there are no applicable guidelines from previous installations. Such facilities are a pioneering effort to furnish a service -which the travelling public desires and will use. The acceptance and current use of the existing facilities shows that the rest areas do provide a service the public will use and appreciate. The Iowa State Highway Commission is to be congratulated for this· pioneering effort. However there are problems, as should be expected when design of a new type of facility has no past operating experience to use as a guide. Another factor which enters is that a rest area facility is quite different and rather unrelated to engineering in the highway field of practice. Basically, the problems encountered can be resolved into several areas, namely 1) maintenance problems in equipment due to 2) insufficient capacity of several other elements of the water systems, and 3) no provisions for water quality control. This study and report is supposed to essentially cover the review of the rest areas, either existing and under construction or letting. However, the approach used has been somewhat different. Several basic economically feasible water system schemes have been developed which are· adaptable to the different well capacities and different water qualities encountered. These basic designs are used as a guide in recommending modifications to the existing rest area water systems, anticipating that the basic designs will be used for future facilities. The magnitude of the problems involved is shown by the fact that the projected water use and demand variations of each rest area building is equivalent to the water supply for a community of about 100 people. The problems of proper operation and maintenance of an eventual thirty to forty-five such facilities are gigantic. For successful operation the rest area water systems must have a high degree of standardization and interchangeability of all elements of the water systems, even if it means a limited degree of over-design in some rest area facilities.

Implementation Manual — 3D Engineered Models for Highway Construction: The Iowa Experience; RB33-014, 2015

3D engineered modeling is a relatively new and developing technology that can provide numerous benefits to owners, engineers, contractors, and the general public. This manual is for highway agencies that are considering or are in the process of switching from 2D plan sets to 3D engineered models in their highway construction projects. It will discuss some of the benefits, applications, limitations, and implementation considerations for 3D engineered models used for survey, design, and construction. Note that is not intended to cover all eventualities in all states regarding the deployment of 3D engineered models for highway construction. Rather, it describes how one state—Iowa—uses 3D engineered models for construction of highway projects, from planning and surveying through design and construction.