Clay mineralogy of ODP Site 188-1165

The Ocean Drilling Program Leg 188 Site 1165 was drilled on the Wild Drift on the Continental Rise off Prydz Bay, East Antarctica to a total depth of 999.1 meters below seafloor (mbsf). It recovered an extensive suite of terrigenous and hemipelagic sediments of early Miocene to Pleistocene age. Of special interest in this study is the sediment column between 0 and 50 mbsf, which consists of a well-preserved section of Pliocene-Pleistocene-age sediments that was sampled at 10-cm intervals. Multiproxy study of this interval could show possible intervals of expansions of the ice-sheet across the continental shelves and express the climatic evolution in Antarctica, particularly during the 'middle' Pliocene warm period (3.15 to 2.85 Ma) which may provide an indication of how the Earth responds to a rise of its surface temperature. According to the existing age model, the upper 50 mbsf stratigraphic sequence of Site 1165 reaches back to ~4.9 Ma. Throughout this interval, the clay-mineral content is characterized by fluctuations of individual clay minerals, particularly smectite and chlorite. The smectite concentration varies mainly between 0% and 30%. Illite fluctuates less between 50% and 80%, and kaolinite varies mainly between 10% and 20%. Chlorite concentrations are mainly 0% to 10%. There is also a noticeable change in magnetic susceptibility at ~34 mbsf that is clearly indicated in the composition of the clay-mineral suite. At this level, smectite decreases and illite, kaolinite and chlorite show some variability. In particular, there is a slight but persistent increase in chlorite. The results from the Plio-Pleistocene transition, with evenly fluctuating smectite and illite contents and the gradually increasing chlorite content, may indicate cooler conditions compared to the mid-Pliocene conditions. Slight increase in illite content and decrease in smectite content towards Pleistocene supports the previous assumption. The results from the mid-Pliocene with the increasing smectite content and decreasing illite content may indicate warmer and possibly interglacial conditions.

Chemical composition of siderites and clay minerals from DSDP Holes 70-506G and 70-507B

As soon as they are emplaced on the sea floor, oceanic basalts go through a low-temperature alteration process which produces black halos concentrical with exposed surfaces and cracks, whereas the grey internal parts of the basaltic pieces apparently remain unaltered. This paper reports for the first time the occurrence of authigenic siderite and ankerite in oceanic basalts and more particularly in the grey internal parts of the latter. Small (8-50 µm) crystals of zoned siderite and ankerite have been observed in ten vesicles of two samples recovered from DSDP Holes 506G and 507B drilled south of the Galápagos Spreading Center (GSC). These Fe-carbonates show a large range of chemical composition (FeCO3 = 47-88%; CaCO3 = 5-40%; MgCO3 = 1-20%; MnCO3 = 0-11%). Most of them are Ca-richer than siderite reported in the literature. The chemical composition of the carbonate clearly reflects the fluctuation of the fluid chemical composition during crystallization. Mn and at least part of the Fe are thought to be hydrothermal in origin, whereas Mg and probably Ca were provided by seawater. It is proposed that siderite and ankerite formed at relatively low temperature (<85°C) and is metastable. The alteration of the GSC basalts seems to have proceeded in two stages: during the first, reducing stage, pyrite precipitated from hydrothermal fluids. A little further in the rock, siderite precipitated from the fluid which had already been modified by the formation of pyrite, and thus in a microenvironment where particular conditions prevailed (high P_CO2, increasing p_S**2- or increasing pH or increasing or decreasing pe). During the second, oxidizing, stage of alteration, a seawater-dominated fluid allowed crystallization of mixtures of Fe-rich smectites and micas, and Fe-hydroxides forming the black halos in the external portion of the basalt pieces and locally oxidizing pyrite and siderite in their innermost part. It is shown in this paper that, even at its earliest stage, and at low temperature, alteration of the upper oceanic crust (lavas) involves fluids enriched in Fe and Mn, interpreted to be of hydrothermal origin.

Sedimentary facies and clay mineralogy of ODP Site 105-646

The grain-size study and analyses of bulk sediment and clay mineral composition of samples collected from the dominant lithologies recovered at ODP Site 646, located on the northern flank of the Eirik Ridge (Labrador Sea), show variations indicating that contour-following currents, linked to Norwegian Sea Overflow Water (NSOW), have controlled sedimentation since the early Pliocene. These currents were influential until the early Pleistocene, despite the onset of major ice-rafting at about 2.5 Ma. A major mineralogical change occurred during the late Miocene: a decrease in the smectite to illite and chlorite ratio and a decrease of the crystallinity of smectites. This change indicates a renewing of the source rocks, which could result from an important hydrological change at this time. This change also is depicted by grain-size data that suggest the bottom current influence should be set earlier than the Pliocene.

Clay mineralogy of sediments from the Bengal Fan

We have measured the relative abundances of smectite, illite, chlorite, and kaolinite in a composite section of the distal Bengal Fan. Two sources of sediment appear to dominate, a smectite-poor, illite-rich source associated with rapid denudation of the Himalayas and a smectite-rich, illite-poor source probably on the continental margin of the Indian sub-continent. Changes in source appear to be related to uplift in the Himalayas and Tibetan Plateau both directly and through the climatic and oceanographic consequences of uplift.

Microfossils detected in a block of ancient dense clay coated with a ferromanganese crust, Clarion-Clipperton Province, East Equatorial Pacific

The area in study is characterized by a regional stratigraphic hiatus from Early Miocene to Quaternary. Deposits from Late Eocene to Early Miocene occur on the bottom surface or under a thin sedimentary cover. Ferromanganese nodules, mostly of Oligocene age, formed on surface layers of Tertiary or Quaternary sediments. A detailed micropaleontological study of a block of dense ancient clay coated with a ferromanganese crust was carried out. Composition of found radiolarian and diatomaceous complexes proved that the crust formed in Quaternary on an eroded surface of Late Oligocene clay. In Quaternary Neogene sediments were eroded and washed away by bottom currents. It is likely that the erosion began 0.9-0.7 Ma at the beginning of the "Glacial Pleistocene". The erosion could be initiated by loosening and resuspension of surface sediments resulting from seismic activity generated by strong earthquakes in the Central America subduction zone. The same vibration maintained residual nodules at the seafloor surface. Thus, for the area in study a common reason and a common Quaternary interval for formation of the following features is supposed: a regional stratigraphic hiatus, formation of residual nodule fields, and position of ancient nodules on the surface of Quaternary sediments.

Thermal diagenesis of clay minerals within volcanogenic material from ODP Site 135-841

Clay minerals are examined in detail in the sediment from the Tonga Trench margin at Site 841 (Leg 135 ODP). The changes in amount and nature of secondary clays with depth provide an alternative explanation for the intensive alteration of volcanogenic material at convergent margins. A characteristic distribution of clay minerals with depth shows four distinct zones unexplainable by simple burial diagenesis processes. These are named the upper, reactive, lower and rhyolitic zones. The reactive zone is intercalated with numerous sills and is characterized by the dominant iron-rich clays such as saponite, corrensite and chlorite associated with analcime. The occurrence of such iron-rich clays, mostly associated with a large amount of analcime, yields chemical and mineralogical evidence for thermal diagenesis. The required heat for the diagenetic process was transferred from recently intruded basaltic andesite sills. In the vicinity of these intrusions, the iron-rich clay minerals may have formed at temperatures up to 200°C. A zoning with respect to clay and zeolite minerals indicates that the influence of the palaeoheat flow decreased with the distance from the intrusion. The formation of interlayered I/S, illite, kaolinite and aluminous chlorite, which are recognized as major secondary minerals within the rhyolitic complex, was mainly controlled by both early diagenesis at moderately elevated temperatures, and since the Eocene by burial diagenesis at low temperatures. The occurrence of a steam zone in an early stage of the intrusion is restricted to Miocene tuffs and has overprinted the early alteration of the volcanogenic material within the tuffs and has changed the originally pristine composition of the pore fluids.

Grain size distribution and clay mineralogy of upper Miocene sediments of ODP Hole 107-652A

The upper Miocene sedimentary sequence of Site 652, located on the lower continental margin of eastern Sardinia, was cored and logged during Ocean Drilling Program (ODP) Leg 107. Geophysical and geochemical logs from the interval 170-365 m below seafloor (mbsf), as well as various core measurements (CaCO3, grain size, X-ray diffraction), provide a mineralogical-geochemical picture that is interpreted in the framework of the climatic and tectonic evolution of the western Tyrrhenian. The results indicate the presence of short- and long-term mineralogical variations. Short-term variations are represented by calcium-carbonate fluctuations in which the amount of CaCO3 is correlated to the grain size of the sediments; coarser sediments are associated with high carbonate content and abundant detrital material. Long-term variation corresponds to a gross grain-size change in the upper part of the sequence, where predominantly fine-grained sediments may indicate a gradual deepening of the lacustrine basin towards the Pliocene. Regional climatic changes and rift-related tectonism are possible causes of this variability in the sedimentation patterns. The clay association is characterized by chlorite, illite, and smectite as dominant minerals, as well as mixed-layers clays, kaolinite, and palygorskite. Chlorite, mixed-layers clays, and illite increase at the expense of smectite below the pebble zone (335 mbsf). This is indicative of diagenetic processes related to the high geothermal gradient and to the chemistry of the evaporative pore waters, rather than to changes in the depositional environment.

Clay mineralogy of the Cenozoic Pagodroma Group, East Antarctica

The Cenozoic Pagodroma Group in the northern Prince Charles Mountains, East Antarctica, is a glaciomarine succession of fjordal character, comprising four uplifted formations of different ages. The composition of the <2 µm fraction of sediments of the Pagodroma Group was analysed in order to help identify source areas, past weathering conditions and glacial regimes. Both clay and non-clay minerals have been quantified. The assemblage of the upper Oligocene to lower Miocene Mount Johnston Formation is characterised by the dominance of illite and intermediate concentrations of chlorite. Similar to that assemblage is the clay mineral suite of the middle Miocene Fisher Bench Formation, where illite and chlorite together account for 95% of the clay minerals. The middle to upper Miocene Battye Glacier Formation is the only formation with significant and persistent smectite concentrations, although illite is still dominant. The kaolinite concentration is also high and is even higher than that of chlorite. The clay fraction of the upper Pliocene to lower Pleistocene Bardin Bluffs Formation is characterised by maximum kaolinite concentrations and relatively low illite and chlorite concentrations. The bulk of the clay fraction in each formation can be explained by the physical weathering and erosion of a nearby source under glacial conditions. In the case of Mount Johnston Formation and Fisher Bench Formation this source may be situated in the metavolcanic and gneissic rocks of Fisher Massif. The sediments of the Bardin Bluffs Formation indicate a local source within the Amery Oasis, where Proterozoic granitoid rocks and gneisses, and Permo-Triassic fluvial rocks of the Amery Group are exposed. These results suggest a strong local imprint on the glacial sediments as northwards flowing ice eroded the bedrock in these areas. The origin of the clay fraction of the Battye Glacier Formation is a matter of debate. The smectite and kaolinite content most easily can be explained by erosion of sources largely hidden beneath the ice upstream. Less likely, these clay minerals reflect climatic conditions that were much warmer and wetter than today, facilitating chemical weathering.

Clay mineralogy of Cape Roberts sediment cores

The clay mineral assemblages of the ca. 1600 m thick Cenozoic sedimentary succession recovered at the CRP-1, CRP-2/2A and CRP-3 drill sites off Cape Roberts on the McMurdo Sound shelf, Antarctica, were analysed in order to reconstruct the palaeoclimate and the glacial history of this part of Antarctica. The sequence can be subdivided into seven clay mineral units that reflect the transition from humid to subpolar and polar conditions. Unit I (35-33.6 Ma) is characterised by an almost monomineralic assemblage consisting of well crystalline, authigenic smectite, and therefore does not allow a palaeoclimatic reconstruction. Unit II (33.6-33.1 Ma) has also a monomineralic clay mineral composition. However, the assemblage consists of variably crystallized smectite that, at least in part, is of detrital origin and indicates chemical weathering under a humid climate. The main source area for the clays was in the Transantarctic Mountains. Minor amounts of illite and chlorite appear for the first time in Unit III (33.1-31 Ma) and suggest subordinate physical weathering. The sediments of Unit IV (31-30.5 Ma) have strongly variable smectite and illite concentrations indicating an alternation of chemical weathering periods and physical weathering periods. Unit V (30.5-24.2 Ma) shows a further shift towards physical weathering. Unit VI (24.2-18.5 Ma) indicates strong physical weathering under a cold climate with persistent and intense illite formation. Unit VII (18.5 Ma to present) documents an additional input of smectite derived from the McMurdo Volcanic Group in the south.