Chemical and isotopic compositions of authigenic carbonates from bottom sediments of Northwest Pacific marginal seas

The paper presents data on authigenic carbonate distribution in Holocene - Upper Pleistocene deposits of the Okhotsk, Japan, East China, Philippine and South China Seas. Description of carbonate samples, their chemical and isotope compositions are given. Chemical analysis of the samples indicates that almost all authigenic carbonates are composed of calcite or magnesian calcite; and only in one case, of siderite. Oxygen isotopic composition (d18O) ranges from +37.7 to +26.1 per mil (SMOW); it is, probably, connected with different temperatures of carbonate formation. A distinct geographic regularity is traced. Decrease in d18O values is observed from the cold Okhotsk Sea to the warm South China Sea. A very wide range of carbon isotopic composition (d13C from -42 to +3.8 per mil) indicates different sources of carbonic acid required for formation of these carbonates. As a basis for carbon isotopic composition we can distinguish three sources of carbonic acid in the studied sediments: microbiological methane oxidation, organic matter destruction during sediment diagenesis, and dissolved organogenic limestone. Thus, formation of authigenic carbonates in sediments from the marginal seas of the Northwest Pacific results from: 1) sediment diagenesis, 2) methane oxidation in zones of gas anomalies, 3) their precipitation from the supersaturated by carbonates sea shoal waters of tropical sea lagoons.

Stable carbon and oxygen isotope ratios of carbonates of ODP Site 103-639

A Tithonian sequence of shallow-water limestones, intercalated with siliciclastics and overlain by dolomite, was recovered during drilling at ODP Site 639 on the edge of a tilted fault block. The carbonates were strongly affected by fracturing, dolomitization, dedolomitization, and compaction. The chronology and nature of the fractures, fracture infilling, and diagenesis of the host rock are established and correlated for both the limestone and the dolomite. A first phase of dolomitization affected limestone that was already, at least partially, indurated. In the limestone unit, fractures were filled by calcite and dolomite; most of the dolomite was recrystallized into calcite, except for the upper part. In the dolomitic unit, the first-formed dolomite was progressively recrystallized into saddle dolomite, as fractures were simultaneously activated. The dolomitic textures become less magnesian (the molar ratio mMg/mCa goes from 1.04-0.98 to 0.80), and the d18O (PDB) ranges from -10 per mil to -8 per mil. The varying pores and fissures are either cemented by a calcic saddle dolomite (mMg/mCa ranging from 0.95 to 0.80) or filled with diverse internal sediments of detrital calcic dolomite, consisting of detrital dolomite silt (d18O from -9 per mil to -7 per mil) and laminated yellow filling (with different d18O values that range from -4 per mil to +3 per mil). These internal sediments clearly contain elements of the host rock and fragments of saddle crystals. They are covered by marls with calpionellids of early Valanginian age, which permits dating of most of the diagenetic phases as pre-Valanginian. The dolomitization appears to be related to fracturing resulting from extensional tectonics; it is also partially related to an erosional episode. Two models of dolomitization can be proposed from the petrographic characteristics and isotopic data. Early replacement of aragonite bioclasts by sparite, dissolution linked to dolomitization, and negative d18O values of dolomite suggest a freshwater influence and 'mixing zone' model. On the other hand, the significant presence of saddle dolomite and repeated negative d18O values suggest a temperature effect; because we can dismiss deep burial, hydrothermal formation of dolomite would be the most probable model. For both of these hypotheses, the vadose filling of cavities and fractures by silt suggests emersion, and the different, and even positive, d18O values of the last-formed yellow internal sediment could suggest dolomitization of the top of the sequence under saline to hypersaline conditions. Fracturing resulting in the reopening of porosity and the draining of dolomitizing fluids was linked to extensional tectonics prior to the tilting of the block. These features indicate an earlier beginning to the rifting of the Iberian margin than previously known. Dolomitization, emersion, and erosion correspond to eustatic sea-level lowering at the Berriasian/Valanginian boundary. Diagenesis, rather than sedimentation, seems to mark this global event and to provide a record of the regional tectonic history.

Sandstone and siltstone beds overlying conglomerate at DSDP Hole 59-439

Massive sandstone and siltstone beds with many shallow-water megafossils overlie acidic volcanic conglomerates at DSDP Site 439. Smear-slides, thin sections from coarse fractions, and heavy minerals of the sandstone and siltstone beds were analyzed. The sandstones and siltstones are very rich in lithic fragments and are classified as lithic arenite and (or) lithic wacke. Hornblende and clinopyroxene are abundant, and zircon is present in most of the examined samples. The proportions of sandstone, chert, and volcanic rock in the coarse fraction are variable, but fragments of clastic rocks and cherts are predominant. Plagioclase crystals of volcanic-rock origin, such as highly zoned plagioclase and very fine, euhedral, lath-shaped plagioclase, are frequently observed. Metamorphic-rock fragments and metamorphic minerals are also observed. Thus, the provenance of the sandstone and siltstone beds appears to have been a slightly mature island arc, the Oyashio ancient landmass, consisting of clastic sediments and metamorphic and volcanic rocks.

Conglomerate and sandstone petrography at DSDP Hole 58-445

Conglomerates and sandstones in lithologic unit V at DSDP Site 445 comprise lithic clasts, detrital minerals, bioclasts, and authigenic minerals. The lithic clasts are dominantly plagioclase-phyric basalt and microdolerite, followed by plagioclase-clinopyroxene-phyric basalt, aphyric basalt, chert, and limestone. A small amount of hornblende schist occurs. Detrital minerals are dominantly plagioclase, augite, titaniferous augite, olivine, green to pale-brown hornblende, and dark-brown hornblende, with subordinate chromian spinel, epidote, ilmenite, and magnetite, and minor amounts of diopside, enstatite, actinolite, and aegirine-augite. Bioclasts are Nummulites boninensis, Asterocyclina sp. cf. A. penuria, and some other larger foraminifers. Correlation of cored and dredged samples indicates that the Daito Ridge is mainly composed of igneous, metamorphic, ultramafic, and sedimentary rocks. The igneous rocks are mafic (probably tholeiitic) and alkalic. The metamorphic rocks are hornblende schist, tremolite schist, and diopside-chlorite schist. The ultramafic rocks are alpinetype peridotites. Mineralogical data suggest that there were two metamorphic events in the Daito Ridge. The older one was intermediate- to high-pressure metamorphism. The younger one was contact metamorphism caused by a Paleocene volcanic event, possibly related to the beginning of spreading of the west Philippine Basin. The ultramafic rocks suffered from the same contact metamorphism. During the Eocene, exposed volcanic and metamorphic rocks on the uplifted Daito Ridge may have supplied pebble clasts to the surrounding coast and shallow sea bottom. The steep slope offshore may have caused frequent slumping and transportation of the pebble clasts and shallow-water benthic organisms into deeper water, forming the conglomerates and sandstones treated here.

Geochemistry of neritic carbonates of ODP Hole 134-831B

Drilling at Bougainville Guyot (Ocean Drilling Program Site 831), New Hebrides Island Arc during Leg 134 revealed that 727.5 m of carbonate overlies an andesite basement. The carbonate cap at Site 831 consists of 20 m of pelagic carbonate overlying 707.5 m of neritic carbonates. The neritic section consists of ~230 m of largely unaltered aragonite sediment that overlies ~497 m of totally calcitized limestone. The deeper portion of the calcitized interval has been pervasively altered by diagenesis. Prior to this study the age distribution of sediments at Bougainville Guyot was poorly known because age diagnostic fossils are sparsely and discontinuously distributed in the sequence. We have used Sr isotopes to provide temporal constraints on the deposition of carbonates at Site 831; these constraints are critical in reconstructing the vertical movement of Bougainville Guyot before its collision with the New Hebrides Island Arc. Overall, the chronostratigraphy of Bougainville Guyot can be subdivided into three intervals: (1) a Pleistocene interval (102.4 to 391.11 meters below sea floor [mbsf]); (2) a Miocene interval (410.31 to 669.53 mbsf); and (3) an Oligocene interval (678.83 to 727.50 mbsf). Strontium isotopic ages of samples increase with increasing depth in the carbonate sequence, except near the bottom of the sequence, where several samples exhibit a consistent reversed age vs. depth trend. Such age reversals are most likely the product of post-depositional rock-water interaction. Preliminary stable isotope data are consistent with diagenetic alteration in the marine and meteoric environments. Several abrupt decreases in d87Sr, and hence age, of sediments are recognized in the carbonate cap at Bougainville Guyot. These disconformities are most likely the product of subaerial exposure in response to relative sea-level fall. Indeed, Sr-isotope ages indicate that 2 to 9 m.y. of sediment deposition is missing across these d87Sr disconformities.

Paleomagnetic of ODP Leg 133 holes

Paleomagnetic and rock-magnetic analyses from discrete samples of carbonate sites on the Queensland Plateau were used to determine magnetic polarity reversal stratigraphy and the nature of magnetization in these sediments. Magnetic polarity zones were correlated with the geomagnetic polarity time scale in the upper portions of cores at Sites 812 through 814, usually back to a late Pliocene age. Loss of reliable directional data was coincidental with a major decrease in magnetic intensity, below which, no stable polarity zones could be identified. The intensity reduction is either an in-situ alteration of magnetic grains, or an input signal representing progressive increase in the magnetic component of Queensland Plateau sediments. Although not conclusive at this point, the geochemical conditions and differing age of intensity reduction support the former hypothesis. Rock-magnetic analysis of carbonate sediments suggests that ultrafine-grained magnetite or maghemite crystals is an important carrier of remanence and may be biogenic in origin. Application of a recently calibrated anhysteretic remanent magnetization test to assess configuration of single-domain crystal within a natural matrix indicates that cementation (ooze-chalk-limestone) may be important in post-depositional changes affecting magnetostatic grain interaction.

Analysis of rocks from Shackleton Range

Studies were made of the glacial geology and provenance of erratic in the Shackleton Range during the German geological expedition GEISHA in 1987/88, especially in the southern and northwestern parts of the range. Evidence that the entire Shackleton Range was once overrun by ice from a southerly to southeasterly direction was provided by subglacial erosional forms (e.g. striations, crescentic gouges, roches moutonnées) and erratics which probably orriginated in the region of the Whichaway Nunataks and the Pensacola Mountains in the southern part of the range. This probably happened during the last major expansion of the Anarctic polar ice sheet, which, on the basis of evidence from other parts of the continent, occurred towards the end of the Miocene. Till and an area of scattered erratics were mapped in the northwestern part of the range. These were deposited during a period of expansion of the Slessor Glacier in the Weichselian (Wisconsian) glacial stage earlier. This expansion was caused by blockage of the glacier by an expanded Filchner ice shelf which resulted from the sinking of the sea level during the Pleistocene, as demonstrated by geological studies in the Weddell Sea and along the coast of the Ross Sea. Studies of the erratics at the edges of glaciers provided information about rock concealed by the glacier.

Frequency distribution of graded turbidite cycles in DSDP sediments from the Coral Sea Basin and the Sea of Japan

At sites 390 and 392 (Deep Sea Drilling Project, Leg 44) on the Blake nose, thoroughly lithified Lower Cretaceous limestone more than 250 m thick is abruptly overlain by a condensed sequence of Barremian to Eocene pelagic carbonate ooze. The Lower Cretaceous sediments consist of three units: limestone with moldic porosity (base), oolitic limestone, and fenestral limestone. Subaerial diagenesis of the limestone section is recorded by (1) caverns with vertical dimensions of up to 10 m, (2) stalactitic intergranular cement, and (3) meniscus sediment (or cement). Compatible with these subaerial features are mud cracks, fenestral fabrics, intraclasts, and cryptalgal structures. Inasmuch as these shallow-water and tidal-flat deposits are now beneath 2,607 m of sea water (plus 99 m of younger sediments), they serve to dramatize the apparent degree of Barremian and later subsidence of this part of the Atlantic outer continental shelf. Porosity and permeability are high in vuggy samples, which are common in the skelmoldic limestone. Cementation has destroyed most of the extensive primary porosity of the two younger units.

Pore-water chemistry of ODP sites 111-677 and 111-678

Sites 677 and 678 were drilled on ODP Leg 111 to test hypotheses about the nature and pattern of hydrothermal circulation on a mid-ocean ridge flank. Together with earlier results from DSDP Site 501/504 and several heatflow and piston coring surveys covering a 100-km**2 area surrounding the three drill sites, they confirm that hydrothermal circulation persists in this 5.9-m.y.-old crust, both in basement and through the overlying sediments (Langseth et al., 1988, doi:10.2973/odp.proc.ir.111.102.1988). Profiles of sediment pore-water composition with depth at the three drill sites show both vertical and horizontal gradients. The shapes of the profiles and their variation from one site to another result from a combination of vertical and horizontal diffusion, convection, and reaction in the sediments and basement. Chemical species that are highly reactive in the siliceous-calcareous biogenic sediments include bicarbonate (alkalinity), ammonium, sulfate, manganese, calcium, strontium, lithium, silica, and possibly potassium. Reactions include bacterial sulfate reduction, mobilization of Mn2+, precipitation of CaCO3, and recrystallization of calcareous and siliceous oozes to chalk, limestone, and chert. Species with profiles more affected by reaction in basaltic basement than in the sediments include Mg, Ca, Na, K, and oxygen isotopes. Reaction in basement at 60?C and at higher temperatures has produced a highly altered basement formation water that is uniform in composition over distances of several kilometers. As inferred from the composition of the basal sediment pore water at the three sites, this uniformity extends from up flow zone to downflow zone in basement and the sediments. It exists in spite of large variations in heat flow and depth to basement, apparently as a result of homogenization by hydrothermal circulation in basement. Profiles for chlorinity, Na, Mg, and other species in the sediment pore waters confirm that Site 678, drilled on a localized heatflow high identified by Langseth et al. (1988), is a site of long-lived upwelling of warm water from basement through the sediments at velocities of 1 to 2 mm/yr. The upflow through the anomalously thin sediments is apparently localized above an uplifted fault block in basement. This site and other similar sites in the survey area give rise to lateral diffusion and possibly flow through the sediments, which produces lateral gradients in sediment pore-water composition at sites such as 501/504. The complementary pore-water profiles at the low-heatflow Site 677 2 km to the south indicate that downflow is occurring through the sediments there, at comparable rates of 1 to 2 mm/yr.

Sedimentology and geochemistry of ODP Leg 129 siliceous deposits

Siliceous deposits drilled on Ocean Drilling Program Leg 129 accumulated within a few degrees of the equator during the Jurassic through early Tertiary, as constrained by paleomagnetic data. During the Jurassic and Early Cretaceous, radiolarian ooze, mixed with a minor amount of pelagic clay, was deposited near the equator, and overall accumulation rates were moderate to low. At a smaller scale, in more detail, periods of relatively higher accumulation rates alternated with periods of very low accumulation rates. Higher rates are represented by radiolarite and limestone; lower rates are represented by radiolarian claystone. Our limited data from Leg 129 suggests that accumulation of biogenic deposits was not symmetrical about the equator or consistent over time. In the Jurassic, sedimentation was siliceous; in the Cretaceous there was significant calcareous deposition; in the Tertiary claystone indicates significantly lower accumulation rates at least the northern part of the equatorial zone. Accumulation rates for Leg 129 deposits in the Cretaceous were higher in the southern part of the equatorial zone than in the northern part, and the southern side of this high productivity zone extended to approximately 15°S, while the northern side extended only to about 5°N. Accumulation rates are influenced by relative contributions from various sediment sources. Several elements and element ratios are useful for discriminating sedimentary sources for the equatorial depositional environments. Silica partitioning calculations indicate that silica is dominantly of biogenic origin, with a detrital component in the volcaniclastic turbidite units, and a small hydrothermal component in the basal sediments on spreading ridge basement of Jurassic age at Site 801. Iron in Leg 129 sediments is dominantly of detrital origin, highest in the volcaniclastic units, with a minor hydrothermal component in the basal sediments at Site 801. Manganese concentrations are highest in the units with the lowest accumulation rates. Fe/Mn ratios are >3 in all units, indicating negligible hydrothermal influence. Magnesium and aluminum concentrations are highest in the volcaniclastic units and in the basal sediments at Site 801. Phosphorous is very low in abundance and may be detrital, derived from fish parts. Boron is virtually absent, as is typical of deep-water deposits. Rare earth element concentrations are slightly higher in the volcaniclastic deposits, suggesting a detrital source, and lower in the rest of the lithologic units. Rare earth element abundances are also low relative to "average shale." Rare earth element patterns indicate all samples are light rare earth element enriched. Siliceous deposits in the volcaniclastic units have patterns which lack a cerium anomaly, suggesting some input of rare earth elements from a detrital source; most other units have a distinct negative Ce anomaly similar to seawater, suggesting a seawater source, through adsorption either onto biogenic tests or incorporation into authigenic minerals for Ce in these units. The Al/(Al + Fe + Mn) ratio indicates that there is some detrital component in all the units sampled. This ratio plotted against Fe/Ti shows that all samples plot near the detrital and basalt end-members, except for the basal samples from Site 801, which show a clear trend toward the hydrothermal end-member. The results of these plots and the association of high Fe with high Mg and Al indicate the detrital component is dominantly volcaniclastic, but the presence of potassium in some samples suggests some terrigenous material may also be present, most likely in the form of eolian clay. On Al-Fe-Mn ternary plots, samples from all three sites show a trend from biogenic ooze at the top of the section downhole to oceanic basalt. On Si-Fe-Mn ternary plots, the samples from all three sites fall on a trend between equatorial mid-ocean spreading ridges and north Pacific red clay. Copper-barium ratios show units that have low accumulation rates plot in the authigenic field, and radiolarite and limestone samples that have high accumulation rates fall in the biogenic field.

Geochemistry, mineralogy, and 40K-40Ar radiometric dating of DSDP Leg 84 basalts - Guatemala Trench

Geochemical (atomic absorption, neutron activation analyses), mineralogical (microprobe), and radiometric (40K - 40Ar) data are presented for five basalts from the Guatemala Trench area (Deep Sea Drilling Project, Leg 84). Strong geochemical and mineralogical differences distinguish two types among these basalts: (1) One basalt (Sample 567A-19,CC), recovered below Upper Cretaceous limestone has the following characteristics: it is quartz normative and has low TiO2, content, as well as low amounts of Cr, Ni and other transition metals, an LREE depleted pattern, and affinities of clinopyroxene phenocryst plotted into the field of tholeiitic and calc-alkalic pyroxenes. (2) Four alkaline basalts, recovered from the mafic and ultramafic acoustic basement, are nepheline normative and show high TiO2 content, high amounts of Cr, Ni and so on, an LREE enriched pattern and compositions of clinopyroxene phenocryst plotted close to or within the field of alkali basalt pyroxenes. These basalts are comparable to those recognized in the lower part of the Santa Elena complex and are clearly different from the oceanic basalts of the Cocos Plate. The radiometric age of the orogenic basalt seems to be close to 80 Ma. The alkaline basalts are clearly older, even if a discrepancy appears between the results of different analyses because of the secondary effects of alteration.

Orbital control on carbonate-lignite cycles on sediment core KAP-107 in the Ptolemais Basin, northern Greece

Time control is essential for the reconstruction of geological processes. We use a combination of relative and absolute methods to establish the chronology and related paleoclimatic processes for Late Neogene lacustrine sediment from the Ptolemais Basin, northern Greece. We determined changes in magnetic polarity and correlated them to the global magnetic polarity time scale, which again is calibrated by radiometric methods, to provide a low-resolution age model for the Upper Miocene to Lower Pliocene (7 - 3 Ma). Sedimentary successions show rhythmic alterations of lignites, clays, and marls. Using photospetrometry we measured this variability at 1-cm resolution, and correlated the pattern to known changes in earth's orbital parameters, namely to eccentricity and precession. For 230-m long borehole KAP-107 from the Amynteon Sub-Basin we obtained a high-resolution age model that spans 2 myr from 5.1 to 3.1 Ma, with age control points at insolation maxima (20-kyr resolution). We recommend using photospectrometry as reliable tool to establish orbital-based chronologies and to reconstruct paleoclimate variability at high resolution.

Palynofacies analysis of sediments in the eastern Equatorial Atlantic

Analyses of the palynofacies and sporomorph thermal alteration indices (TAI) of sediments from Ocean Drilling Program (ODP) Sites 959 to 962 in the Cote d'Ivoire-Ghana Transform Margin, West Africa were undertaken to (1) determine the source and depositional conditions of the organic matter in the sediments, (2) refine a paleobathymetric curve derived from other data for Site 959, which drilled the most continuous sedimentary sequence from Pleistocene to Albian and (3) interpret the paleothermal history of the area. Twelve types of dispersed organic matter were identified: amorphous organic matter (AOM), marine palynomorphs, algae, resins, black debris, yellow-brown fragments, black-brown fragments, cuticles, plant tissue, wood, sporomorphs and fungi, The relative abundances of these organic matter components at each site were analyzed using cluster analysis, resulting in the identification of seven palynofacies assemblages at Site 959, five each at sites 960 and 961, and four at Site 962. Amorphous organic matter (which is chiefly marine derived), black debris and wood have played the most significant role in defining palynofacies assemblages. The palynofacies assemblages show some correlation with lithologic units, sediment sources and depositional environments. Previous palynofacies studies in passive margins have demonstrated that changes in the ratio of AOM to terrestrial organic matter are related primarily to proximal-distal positions of depositional environments relative to the shoreline. However, this assumption does not always hold true for a transform margin where tectonic factors play an important role in the organic matter distribution, at least in the early stages of evolution. Lithofacies, CCD paleodepths for the North Atlantic, trace fossil association, benthic foraminifera and palynofacies data were the criteria used for reconstructing a paleobathymetric curve for Site 959. A cyclicity in the organic matter distribution of the Upper Miocene to Lower Pliocene pelagic sediments could be related to fluctuations in productivity of biosiliceous and calcareous organisms, and sedimentation rates. A drastic increase in the amount of AOM and a decrease in black debris and wood in the carbonate and clastic rocks (Lithologic Unit IV) overlying the tectonized Albian sediments (Lithologic Unit V) at Sites 959 and 960 coincide with the presence of an unconformity. Qualitative color analysis of palynomorphs was undertaken for all sites, although the main focus was on Site 959 where detailed organic geochemical data were available. At Site 959, TAI values indicate an immature stage of organic maturation (<2) down to the black claystones of Lithologic Unit III at about 918.47 mbsf. Below this, samples show an increase with depth to a moderately mature stage (>2 except for the claystone samples between 1012.52 and 1036.5 mbsf, and one limestone sample at 1043.4 mbsf), reaching peak levels of 2.58 to 3.0 in the tectonized Albian sediments below the unconformity. These TAI values show a positive correlation with the Tma x values derived from Rock-Eval pyrolysis data. The highest values recorded in the basal tectonized units at all the sites (Sites 960-962 have mean values between 2.25 and 3.13) may be related to high heat flow during the intracontinental to syntransform basin stage in the region.