Taxonomy and distribution of the green algal genus Halimeda (Bryopsidales, Chlorophyta) in Brazil

Halimeda is a genus of calcified coenocytic green algae with a well known ecological importance in some tropical areas. Bleached calcified segments of Halimeda may accumulate in large deposits of economic potential as is the case in the northeastern coast of Brazil. In a survey of the genus in Brazil based on recent collections and examination of abundant material deposited on Brazilian herbaria we identified seven species: Halimeda cuneata Hering, H. discoidea Decaisne, H. gracilis Harvey ex J. Agardh, H. incrassata (Ellis) Lamouroux, H. opuntia (Linnaeus) Lamouroux, H. simulans Howe and H. tuna (Ellis & Solander) Lamouroux. These species are described in detail, with emphasis on diagnostic characters. Our study has shown that the shape and size of the utricula in surface view, under scanning electron microscopy, can be utilized to discriminate some species. Fertile specimens of Halimeda cuneata and H. discoidea are reported for the first time in the region. Data on vertical and geographical distribution are presented for each species and the southern limit of the genus in the western Atlantic was extended.

Growth of red and green strains of the tropical agarophyte Gracilaria cornea J. Agardh (Gracilariales, Rhodophyta) in laboratory

Gracilaria cornea J. Agardh is an important agarophyte occurring in the western Atlantic Ocean. Green colour individuals of G. cornea were found in a natural population, growing next to red individuals, which were more common. Due to the importance of colour strains in genetic and intraspecific variability studies, this work aimed to characterize the red and green strains evaluating different nutritional and light conditions. Red and green gametophytes were cultivated at 14:10 light: dark cycle, with alternating aeration periods of 30 min. Two different enriched solutions were tested: von Stosch (VSS) at concentrations reduced to 12.5% and 25%; and Provasoli (PES) at concentrations reduced to 25% and 50%, and 100%. Red and green gametophytes were cultivated at the irradiance of 45 mumol photons m-2 s-1. In another experiment utilizing PES 100%, two sources of light (Osram 40 W daylight fluorescent tubes and Sylvania Designer 3,500 tubes) were tested at irradiances of 90 and 180 mumol photons m-2 s-1. Growth rates (GR) were evaluated for five weeks. Gametophytes developed few branches and reproductive structures were not induced. Differences were not observed between GR of red and green strains in the conditions tested. GR were higher in VSS 12.5% (8.4% day-1) than in 25% (7.1% day-1), suggesting an adaptation of the species to low nutrient concentrations. GR were higher at 180 (9.0% day-1) than at 90 mumol photons m-2 s-1 (6.3% day-1). These results suggest that G. cornea should be cultivated in laboratory at high irradiances and low nutrient concentrations. These data will be useful in future genetic and physiological studies of the species.

Corticolous green algae from tropical forest remnants in the northwest region of São Paulo State, Brazil

The algae inhabit a wide variety of terrestrial environments and substrates; however the taxonomic knowledge for tropical regions is still scarce. This survey was conducted in ten forest remnants in São Paulo State where visible growths of algae and bryophytes were collected and studied for the main algal components of the communities. Results reveal the occurrence of nine species of green algae, distributed through the class Trebouxiophyceae (one species), Charophyceae (one species) and Ulvophyceae (seven species). Desmococcus olivaceus (Persoon ex Archerson) J. R. Laundon and Printzina effusa (Krempelhüber) Thompson & Wujek are new records for Brazil. The most frequent organisms found in the areas pertain to Trentepohliales that is mainly represented by Trentepohlia species. On the basis of results found, it is recommended that such communities receive more attention in future investigations to improve the knowledge about this important group of primary producers.

Green algal interactions with physicochemical parameters of some manmade ponds in Zaria, northern Nigeria

Green algal species and their association with physicochemical parameters in some manmade ponds in Zaria, Nigeria were studied from November 2005 to August 2006. Phytoplankton and water samples were collected, preserved and analyzed using standard methods. A total of 27 green algal species divided into 16 families were recorded. Shannon diversity indices ranged from 1.75 to 2.39 in all ponds, dominance index from 0.14 to 0.23 and species evenness 0.56 to 0.64. Closterium sp. and Rhizoclonium hookeri Kuetz. were positively associated with the concentration of Fe, however they were negatively correlated (sensitive) to alkalinity, total dissolved solids and electrical conductivity. Stichococcus bacillaris Naegeli, Staurastrum rotula Nordst. and Sphaeroplea sp. had significant positive relationship with biochemical oxygen demand (BOD), Mn, and Mo levels in the water. Pseudouvella americana (Snow) Wille. and Scenedesmus quadricauda (Turp.) de Bréb. showed a close positive association with alkalinity but were sensitive to Fe, BOD, Mn and Mo. The species reported here showed closed association with physicochemical factors in these ponds.

AQUAREL CONCEPT Aquatic resources for green energy realization

The AQUAREL project studied the availability and optional utilization methods for fish processing side streams and other aquatic biomaterial in the Republic of Karelia. Additionally processing aquatic biomaterial with manure and sewage sludge was studied. Based on the results, the most feasible option today is to process fish side streams to fish oil and dewatered oil-free residue and to use them for fish or animal feed production. However, it is necessary to highlight, that changes in e.g. economic environment, energy prices and demand may require re-evaluating the results and conclusions made in the project. Producing fish oil from fish processing side streams is an easy and relatively simple production process generating a valuable end product. The functionality of the process was confirmed in a pilot conducted in the project. The oil and solids are separated from the heated fish waste based on gravity. The fish oil separating on top of the separator unit is removed. Fish oil can as such be utilized for heating purposes, fish meal or animal feed production, but it can also be further processed to biodiesel. However, due to currently moderate energy prices in Russia, biodiesel production is not economically profitable. Even if the fish oil production process is not complicated, the operative management of small-scale fish oil production unit requires dedicated resources and separate facilities especially to meet hygiene requirements. Managing the side streams is not a core business for fish farmers. Efficient and economically profitable fish oil production requires a centralized production unit with bigger processing capacity. One fish processing unit needs to be designed to manage side streams collected from several fish farms. The optimum location for the processing unit is in the middle of the fish farms. Based on the transportation cost analysis in the Republic of Karelia, it is not economically efficient to transport bio-wastes for more than 100 km since the transportation costs start increasing substantially. Another issue to be considered is that collection of side streams, including the dead fish, from the fish farms should be organized on a daily basis in order to eliminate the need for storing the side streams at the farms. Based on AQUAREL project studies there are different public funding sources available for supporting and enabling profitable and environmentally sustainable utilization, research or development of fish processing side streams and other aquatic biomaterial. Different funding programmes can be utilized by companies, research organizations, authorities and non-governmental organizations.

Using green fluorescent protein to understand the mechanisms of G-protein-coupled receptor regulation

G protein-coupled receptor (GPCR) activation is followed rapidly by adaptive changes that serve to diminish the responsiveness of a cell to further stimulation. This process, termed desensitization, is the consequence of receptor phosphorylation, arrestin binding, sequestration and down-regulation. GPCR phosphorylation is initiated within seconds to minutes of receptor activation and is mediated by both second messenger-dependent protein kinases and receptor-specific G protein-coupled receptor kinases (GRKs). Desensitization in response to GRK-mediated phosphorylation involves the binding of arrestin proteins that serve to sterically uncouple the receptor from its G protein. GPCR sequestration, the endocytosis of receptors to endosomes, not only contributes to the temporal desensitization of GPCRs, but plays a critical role in GPCR resensitization. GPCR down-regulation, a loss of the total cellular complement of receptors, is the consequence of both increased lysosomal degradation and decreased mRNA synthesis of GPCRs. While each of these agonist-mediated desensitization processes are initiated within a temporally dissociable time frame, recent data suggest that they are intimately related to one another. The use of green fluorescent protein from the jellyfish Aqueora victoria as an epitope tag with intrinsic fluorescence has facilitated our understanding of the relative relationship between GRK phosphorylation, arrestin binding, receptor sequestration and down-regulation.

Green supplier selection via Multiple Criteria Data Envelopment Analysis

An appropriate supplier selection and its profound effects on increasing the competitive advantage of companies has been widely discussed in supply chain management (SCM) literature. By raising environmental awareness among companies and industries they attach more importance to sustainable and green activities in selection procedures of raw material providers. The current thesis benefits from data envelopment analysis (DEA) technique to evaluate the relative efficiency of suppliers in the presence of carbon dioxide (CO2) emission for green supplier selection. We incorporate the pollution of suppliers as an undesirable output into DEA. However, to do so, two conventional DEA model problems arise: the lack of the discrimination power among decision making units (DMUs) and flexibility of the inputs and outputs weights. To overcome these limitations, we use multiple criteria DEA (MCDEA) as one alternative. By applying MCDEA the number of suppliers which are identified as efficient will be decreased and will lead to a better ranking and selection of the suppliers. Besides, in order to compare the performance of the suppliers with an ideal supplier, a “virtual” best practice supplier is introduced. The presence of the ideal virtual supplier will also increase the discrimination power of the model for a better ranking of the suppliers. Therefore, a new MCDEA model is proposed to simultaneously handle undesirable outputs and virtual DMU. The developed model is applied for green supplier selection problem. A numerical example illustrates the applicability of the proposed model.

The leaves of green plants as well as a cyanobacterium, a red alga, and fungi contain insulin-like antigens

We report the detection of insulin-like antigens in a large range of species utilizing a modified ELISA plate assay and Western blotting. We tested the leaves or aerial parts of species of Rhodophyta (red alga), Bryophyta (mosses), Psilophyta (whisk ferns), Lycopodophyta (club mosses), Sphenopsida (horsetails), gymnosperms, and angiosperms, including monocots and dicots. We also studied species of fungi and a cyanobacterium, Spirulina maxima. The wide distribution of insulin-like antigens, which in some cases present the same electrophoretic mobility as bovine insulin, together with results recently published by us on the amino acid sequence of an insulin isolated from the seed coat of jack bean (Canavalia ensiformis) and from the developing fruits of cowpea (Vigna unguiculata), suggests that pathways depending on this hormone have been conserved through evolution.

Reporting of Green Supply Chain Management and Industrial Symbiosis

The purpose of this thesis is to examine how the reporting of operations related to green supply chain management and industrial symbiosis has evolved in UPM, Fortum and Kemira within the last ten years. The focus is on the improved operations, which are studied based on annual reports of these companies. The study provides a deeper understanding of the nature of green supply chain management and industrial symbiosis as well as the possibilites that their combination offers. The research is part of the DemaNET research project The study indicates that the environmental regulations and reporting standards have forced the studied companies to report their operations related to green supply chain management and industrial symbiosis more in detail during the last ten years. The operations related to green supply chain management in the studied companies are more common compared to operations related to industrial symbiosis. Often these two operations were also partially integrated, indicating a hybrid model. Even though firms often used hybrid models they still focused mainly on greening the internal operations rather than finding alternative ways for symbiosis outside the organization. The integration of green supply chain management and industrial symbiosis is most likely to occur when mutually beneficial relationships align the interests of all parties, thus resulting in the co-creation of value. The findings suggest that identifying mutual benefits and the flow of by-products are the ones that companies should give more attention to.

Green aspects study in game development

Context: Game development has become increasingly important in the software industry, but this importance has not affected the way software engineering approaches and methodologies manage the differences they have with game development. Similarly, software engineering does not fully support sustainability practices, causing this element to often not be considered or even known as a requirement for a development lifecycle. Goal: The aim of this thesis is to study the mode in which games are developed, and the involved sustainable aspects and the relevant concerns regarding the migration processes. Method: A quantitative study was conducted, gathering 33 answers of game professionals from four continents, from administrative (25%) and technical oriented positions (75%). Results: Three trends were observed: 1) Agile process models are used, 2) major concerns for mobile development and digital marketing, 3) minor concerns for eco-impact elements and certain development phases such as testing and crunch time development. Conclusion: Traditional Software engineering would require a major change on its processes and models to fit with modern agile development, game development approaches and sustainable requirements.

Leptin is not associated independently with hypertension in Japanese-Brazilian women

We evaluated the relationship of leptin with hypertension adjusted for body mass index (BMI) and/or waist circumference in a population of Japanese-Brazilian women aged > or = 30 years with centrally distributed adiposity. After excluding diabetic subjects, the study subjects - who participated in a population-based study on the prevalence of metabolic syndrome - showed prevalence rates of obesity (BMI > or = 25 kg/m²) and central adiposity (waist > or = 80 cm) of 32.0 and 37.8%, respectively. The hypertensive group (N = 162) was older, had higher BMI (24.9 ± 4.2 vs 23.3 ± 3.4 kg/m², P < 0.001), waist circumference (81.1 ± 10.1 vs 76.3 ± 8.2 cm, P < 0.001) and insulin levels (8.0 ± 6.2 vs 7.1 ± 4.9 µU/mL, P < 0.05) than the normotensive group (N = 322) and showed an unfavorable metabolic profile (higher 2-h plasma glucose, C-reactive protein and non-HDL cholesterol levels). Leptin did not differ between groups (8.2 ± 6.8 vs 7.2 ± 6.6 ng/mL, P = 0.09, for hypertensive vs normotensive, respectively) and its levels correlated significantly with anthropometric variables but not with blood pressure. Logistic regression analysis indicated that age and waist were independently associated with hypertension but not with homeostasis model assessment of insulin resistance or leptin levels. The lack of an independent association of hypertension with metabolic parameters (2-h glucose, C-reactive protein and non-HDL cholesterol) after adjustment for central adiposity suggested that visceral fat deposition may be the common mediator of the disturbances of the metabolic syndrome. Our data indicate that age and waist are major determinants of hypertension in this population of centrally obese (waist > or = 80 cm) Japanese-Brazilian women, but do not support a role for leptin in the elevation of blood pressure.

Green welding in practice

Efficient production and consumption of energy has become the top priority of national and international policies around the world. Manufacturing industries have to address the requirements of the government in relation to energy saving and ecologically sustainable products. These industries are also concerned with energy and material usage due to their rising costs. Therefore industries have to find solutions that can support environmental preservation yet maintain competitiveness in the market. Welding, a major manufacturing process, consumes a great deal of material and energy. It is a crucial process in improving a product’s life-cycle cost, strength, quality and reliability. Factors which lead to weld related inefficiencies have to be effectively managed, if industries are to meet their quality requirements and fulfil a high-volume production demand. Therefore it is important to consider some practical strategies in welding process for optimization of energy and material consumption. The main objective of this thesis is to explore the methods of minimizing the ecological footprint of the welding process and methods to effectively manage its material and energy usage in the welding process. The author has performed a critical review of the factors including improved weld power source efficiency, efficient weld techniques, newly developed weld materials, intelligent welding systems, weld safety measures and personnel training. The study lends strong support to the fact that the use of eco-friendly welding units and the quality weld joints obtained with minimum possible consumption of energy and materials should be the main directions of improvement in welding systems. The study concludes that, gradually implementing the practical strategies mentioned in this thesis would help the manufacturing industries to achieve on the following - reduced power consumption, enhanced power control and manipulation, increased deposition rate, reduced cycle time, reduced joint preparation time, reduced heat affected zones, reduced repair rates, improved joint properties, reduced post-weld operations, improved automation, improved sensing and control, avoiding hazardous conditions and reduced exposure of welder to potential hazards. These improvement can help in promotion of welding as a green manufacturing process.

The importance of package design to Japanese consumers: The role of visual and informational elements of package design in decision making

The importance of package design as a marketing tool is growing as the competition in retail environment increases. However, there is a lack of studies on how each element of package design affects consumer decisions in different countries. The objective of this thesis is to study the role of package design to Japanese consumers. The research was conducted through an experiment with a sample of 37 Japanese female participants. They were divided into two groups and were given different tasks: one group had to choose a chocolate for themselves, and the other for a group of friends. The participants were presented with 15 different Finnish chocolate boxes to choose from. The qualitative data was gathered through observation and semi-structured interviews. In addition, data from questionnaires was quantified and all the data was triangulated. The empirical results suggest that visual elements strongly affect the decision making of Japanese consumers. Image was the most important element which acted as both, a visual and an informational aspect in the experiment. Informational elements on the other hand have little effect, especially when the context is written in a foreign language. However, informational elements affected participants who were choosing chocolates for a group of friends. A unique finding was the importance of kawaii (cuteness) to Japanese consumers.

Apolipoprotein CIII polymorphism and triglyceride levels of a Japanese population living in Southern Brazil

Apolipoprotein CIII (apo-CIII) participates in the regulation of triglyceride-rich lipoprotein metabolism. Several polymorphic sites have been detected within and around the apo-CIII gene. Here, we examined the relationship between apo-CIII SstI polymorphism (CC, CG, GG genotypes) and plasma triglyceride (TG) levels in a group of 159 Japanese individuals living in Southern Brazil. The sample was divided into a group of Japanese descendants (N = 51) with high TG (HTG; >200 mg/dL) and a group of Japanese descendants (N = 108) with normal TG (NTG; <200 mg/dL). TG and total cholesterol levels were analyzed by an enzymatic method using the Labtest-Diagnostic kit and high- and low-density lipoproteins by a direct method using the Labtest-Diagnostic kit and DiaSys Diagnostic System International kit, respectively. A 428-bp sequence of apo-CIII gene was amplified using oligonucleotide primers 5' GGT GAC CGA TGG CTT CAG TTC CCT GA 3' and 5' CAG AAG GTG GAT AGA GCG CTG GCC T 3'. The PCR products were digested with a restriction endonuclease SstI. Rare G allele was highly prevalent in our study population (0.416) compared to Caucasians (0.00-0.11). G allele was almost two times more prevalent in the HTG group compared to the NTG group (P < 0.001). The genotype distribution was consistent with the Hardy-Weinberg equilibrium. There was a significant association between rare G allele and HTG in Japanese individuals living in Southern Brazil as indicated by one-way ANOVA, P < 0.05.

Ethnicity as a risk factor for obstructive sleep apnea: comparison of Japanese descendants and white males in São Paulo, Brazil

Some studies showed that Asians with obstructive sleep apnea (OSA) are thinner than Caucasians. Because obesity is a major risk factor for OSA, it was concluded that Asians are predisposed to OSA. However, body fat composition varies for a same body mass index (BMI) according to ethnicity. We firstly compared anthropometric characteristics, symptoms and associated disorders in all consecutive male Japanese descendants and white males with OSA referred for polysomnography. In a second analysis, all Japanese descendants were compared to a subgroup of white males, matched for apnea/hypopnea index and age. In the first analysis, age, symptoms, OSA severity and co-morbidities were similar among Japanese descendants (N = 54) and white patients (N = 466). However, Japanese descendants had a lower BMI than white patients: 27.1 (25.5-28.4) vs 29.4 (26.5-33.0) kg/m², respectively (P < 0.001). In the second analysis, Japanese descendants had a lower BMI than white patients (P < 0.001). Multiple linear regression considering the entire group revealed that age, BMI, neck circumference, Epworth sleepiness scale, ethnicity and %REM sleep were independent predictors for apnea/hypopnea index (P < 0.001). Ethnicity was no longer significantly associated with OSA severity when we adopted the World Health Organization criteria for obesity (≥25 and 30 kg/m² among Japanese descendants and white males, respectively). Japanese descendants with OSA have a lower BMI than white subjects of similar severity. However, ethnicity was not associated with OSA severity when an ethnical difference in obesity criteria was respected. Our data suggest that Japanese descendants are not predisposed to OSA.