Profiling Three-Dimensional Nuclear Telomeric Architecture of Myelodysplastic Syndromes and Acute Myeloid Leukemia Defines Patient Subgroups

Purpose: Myelodysplastic syndromes (MDS) are a group of disorders characterized by cytopenias, with a propensity for evolution into acute myeloid leukemias (AML). This transformation is driven by genomic instability, but mechanisms remain unknown. Telomere dysfunction might generate genomic instability leading to cytopenias and disease progression. Experimental Design: We undertook a pilot study of 94 patients with MDS (56 patients) and AML (38 patients). The MDS cohort consisted of refractory cytopenia with multilineage dysplasia (32 cases), refractory anemia (12 cases), refractory anemia with excess of blasts (RAEB) 1 (8 cases), RAEB2 (1 case), refractory anemia with ring sideroblasts (2 cases), and MDS with isolated del(5q) (1 case). The AML cohort was composed of AML-M4 (12 cases), AML-M2 (10 cases), AML-M5 (5 cases), AML-M0 (5 cases), AML-M1 (2 cases), AML-M4eo (1 case), and AML with multidysplasia-related changes (1 case). Three-dimensional quantitative FISH of telomeres was carried out on nuclei from bone marrow samples and analyzed using TeloView. Results: We defined three-dimensional nuclear telomeric profiles on the basis of telomere numbers, telomeric aggregates, telomere signal intensities, nuclear volumes, and nuclear telomere distribution. Using these parameters, we blindly subdivided the MDS patients into nine subgroups and the AML patients into six subgroups. Each of the parameters showed significant differences between MDS and AML. Combining all parameters revealed significant differences between all subgroups. Three-dimensional telomeric profiles are linked to the evolution of telomere dysfunction, defining a model of progression from MDS to AML. Conclusions: Our results show distinct three-dimensional telomeric profiles specific to patients with MDS and AML that help subgroup patients based on the severity of telomere dysfunction highlighted in the profiles. Clin Cancer Res; 18(12); 3293-304. (C) 2012 AACR.

Studio del comportamento meccanico di smalti porcellanati per substrati metallici

Composite porcelain enamels are inorganic coatings for metallic components based on a special ceramic-vitreous matrix in which specific additives are randomly dispersed. The ceramic-vitreous matrix is made by a mixture of various raw materials and elements and in particular it is based on boron-silicate glass added with metal oxides(1) of titanium, zinc, tin, zirconia, alumina, ecc. These additions are often used to improve and enhance some important performances such as corrosion(2) and wear resistance, mechanical strength, fracture toughness and also aesthetic functions. The coating process, called enamelling, depends on the nature of the surface, but also on the kind of the used porcelain enamel. For metal sheets coatings two industrial processes are actually used: one based on a wet porcelain enamel and another based on a dry-silicone porcelain enamel. During the firing process, that is performed at about 870°C in the case of a steel substrate, the enamel raw material melts and interacts with the metal substrate so enabling the formation of a continuous varying structure. The interface domain between the substrate and the external layer is made of a complex material system where the ceramic vitreous and the metal constituents are mixed. In particular four main regions can be identified, (i) the pure metal region, (ii) the region where the metal constituents are dominant compared with the ceramic vitreous components, (iii) the region where the ceramic vitreous constituents are dominant compared with the metal ones, and the fourth region (iv) composed by the pure ceramic vitreous material. It has also to be noticed the presence of metallic dendrites that hinder the substrate and the external layer passing through the interphase region. Each region of the final composite structure plays a specific role: the metal substrate has mainly the structural function, the interphase region and the embedded dendrites guarantee the adhesion of the external vitreous layer to the substrate and the external vitreous layer is characterized by an high tribological, corrosion and thermal shock resistance. Such material, due to its internal composition, functionalization and architecture can be considered as a functionally graded composite material. The knowledge of the mechanical, tribological and chemical behavior of such composites is not well established and the research is still in progress. In particular the mechanical performances data about the composite coating are not jet established. In the present work the Residual Stresses, the Young modulus and the First Crack Failure of the composite porcelain enamel coating are studied. Due to the differences of the porcelain composite enamel and steel thermal properties the enamelled steel sheets have residual stresses: compressive residual stress acts on the coating and tensile residual stress acts on the steel sheet. The residual stresses estimation has been performed by measuring the curvature of rectangular one-side coated specimens. The Young modulus and the First Crack Failure (FCF) of the coating have been estimated by four point bending tests (3-7) monitored by means of the Acoustic Emission (AE) technique(5,6). In particular the AE information has been used to identify, during the bending tests, the displacement domain over which no coating failure occurs (Free Failure Zone, FFZ). In the FFZ domain, the Young modulus has been estimated according to ASTM D6272-02. The FCF has been calculated as the ratio between the displacement at the first crack of the coating and the coating thickness on the cracked side. The mechanical performances of the tested coated specimens have also been related and discussed to respective microstructure and surface characteristics by double entry charts.

A multilevel converter structure for grid-connected PV plants

A new conversion structure for three-phase grid-connected photovoltaic (PV) generation plants is presented and discussed in this Thesis. The conversion scheme is based on two insulated PV arrays, each one feeding the dc bus of a standard 2-level three-phase voltage source inverter (VSI). Inverters are connected to the grid by a traditional three-phase transformer having open-end windings at inverters side and either star or delta connection at the grid side. The resulting conversion structure is able to perform as a multilevel VSI, equivalent to a 3-level inverter, doubling the power capability of a single VSI with given voltage and current ratings. Different modulation schemes able to generate proper multilevel voltage waveforms have been discussed and compared. They include known algorithms, some their developments, and new original approaches. The goal was to share the grid power with a given ratio between the two VSI within each cycle period of the PWM, being the PWM pattern suitable for the implementation in industrial DSPs. It has been shown that an extension of the modulation methods for standard two-level inverter can provide a elegant solution for dual two-level inverter. An original control method has been introduced to regulate the dc-link voltages of each VSI, according to the voltage reference given by a single MPPT controller. A particular MPPT algorithm has been successfully tested, based on the comparison of the operating points of the two PV arrays. The small deliberately introduced difference between two operating dc voltages leads towards the MPP in a fast and accurate manner. Either simulation or experimental tests, or even both, always accompanied theoretical developments. For the simulation, the Simulink tool of Matlab has been adopted, whereas the experiments have been carried out by a full-scale low-voltage prototype of the whole PV generation system. All the research work was done at the Lab of the Department of Electrical Engineering, University of Bologna.

Advanced lithium and lithium-ion rechargeable batteries for automotive applications

The worldwide demand for a clean and low-fuel-consuming transport promotes the development of safe, high energy and power electrochemical storage and conversion systems. Lithium-ion batteries (LIBs) are considered today the best technology for this application as demonstrated by the recent interest of automotive industry in hybrid (HEV) and electric vehicles (EV) based on LIBs. This thesis work, starting from the synthesis and characterization of electrode materials and the use of non-conventional electrolytes, demonstrates that LIBs with novel and safe electrolytes and electrode materials meet the targets of specific energy and power established by U.S.A. Department of Energy (DOE) for automotive application in HEV and EV. In chapter 2 is reported the origin of all chemicals used, the description of the instruments used for synthesis and chemical-physical characterizations, the electrodes preparation, the batteries configuration and the electrochemical characterization procedure of electrodes and batteries. Since the electrolyte is the main critical point of a battery, in particular in large- format modules, in chapter 3 we focused on the characterization of innovative and safe electrolytes based on ionic liquids (characterized by high boiling/decomposition points, thermal and electrochemical stability and appreciable conductivity) and mixtures of ionic liquid with conventional electrolyte. In chapter 4 is discussed the microwave accelerated sol–gel synthesis of the carbon- coated lithium iron phosphate (LiFePO 4 -C), an excellent cathode material for LIBs thanks to its intrinsic safety and tolerance to abusive conditions, which showed excellent electrochemical performance in terms of specific capacity and stability. In chapter 5 are presented the chemical-physical and electrochemical characterizations of graphite and titanium-based anode materials in different electrolytes. We also characterized a new anodic material, amorphous SnCo alloy, synthetized with a nanowire morphology that showed to strongly enhance the electrochemical stability of the material during galvanostatic full charge/discharge cycling. Finally, in chapter 6, are reported different types of batteries, assembled using the LiFePO 4 -C cathode material, different anode materials and electrolytes, characterized by deep galvanostatic charge/discharge cycles at different C-rates and by test procedures of the DOE protocol for evaluating pulse power capability and available energy. First, we tested a battery with the innovative cathode material LiFePO 4 -C and conventional graphite anode and carbonate-based electrolyte (EC DMC LiPF 6 1M) that demonstrated to surpass easily the target for power-assist HEV application. Given that the big concern of conventional lithium-ion batteries is the flammability of highly volatile organic carbonate- based electrolytes, we made safe batteries with electrolytes based on ionic liquid (IL). In order to use graphite anode in IL electrolyte we added to the IL 10% w/w of vinylene carbonate (VC) that produces a stable SEI (solid electrolyte interphase) and prevents the graphite exfoliation phenomenon. Then we assembled batteries with LiFePO 4 -C cathode, graphite anode and PYR 14 TFSI 0.4m LiTFSI with 10% w/w of VC that overcame the DOE targets for HEV application and were stable for over 275 cycles. We also assembled and characterized ―high safety‖ batteries with electrolytes based on pure IL, PYR 14 TFSI with 0.4m LiTFSI as lithium salt, and on mixture of this IL and standard electrolyte (PYR 14 TFSI 50% w/w and EC DMC LiPF 6 50% w/w), using titanium-based anodes (TiO 2 and Li 4 Ti 5 O 12 ) that are commonly considered safer than graphite in abusive conditions. The batteries bearing the pure ionic liquid did not satisfy the targets for HEV application, but the batteries with Li 4 Ti 5 O 12 anode and 50-50 mixture electrolyte were able to surpass the targets. We also assembled and characterized a lithium battery (with lithium metal anode) with a polymeric electrolyte based on poly-ethilenoxide (PEO 20 – LiCF 3 SO 3 +10%ZrO 2 ), which satisfied the targets for EV application and showed a very impressive cycling stability. In conclusion, we developed three lithium-ion batteries of different chemistries that demonstrated to be suitable for application in power-assist hybrid vehicles: graphite/EC DMC LiPF 6 /LiFePO 4 -C, graphite/PYR 14 TFSI 0.4m LiTFSI with 10% VC/LiFePO 4 -C and Li 4 T i5 O 12 /PYR 14 TFSI 50%-EC DMC LiPF 6 50%/LiFePO 4 -C. We also demonstrated that an all solid-state polymer lithium battery as Li/PEO 20 –LiCF 3 SO 3 +10%ZrO 2 /LiFePO 4 -C is suitable for application on electric vehicles. Furthermore we developed a promising anodic material alternative to the graphite, based on SnCo amorphous alloy.

Analyse genomischer Imbalancen in hepatozellulären Karzinomen und präneoplastischen Leberläsionen

Das hepatozelluläre Karzinom (HCC) ist mit ungefähr 1,000,000 neuen Fällen pro Jahr einer der häufigsten malignen Tumore weltweit. Es ist hauptsächlich in Südost-Asien und im südlichen Afrika verbreitet. Risikofaktoren sind chronische Infektionen mit Hepatitis Viren (HBV, HCV), Aflatoxin B1-Belastung und chronischer Alkoholkonsum. Um Veränderungen auf genomischer Ebene in HCCs zu untersuchen, wurden in der vorliegenden Untersuchung Frischgewebeproben von 21 Patienten mit HCCs und formalin-fixiertes, paraffineingebettetes Material von 6 Dysplastischen Knoten mittels Comparativer genomischer Hybridisierung (CGH) analysiert. In den untersuchten HCCs konnte Zugewinne auf 1q (12/21), 6p ( 6/21), 8q (11/21), 17q (6/21), 20q (6/21), sowie Verluste auf 4q (7/21), 6q (4/21), 10q (3/21), 13q (4/21), 16q (3/21) identifiziert werden. Die Validität der mit diesem Ansatz erzielten Ergebnisse konnte anhand von unabhängigen Kontrollexperimenten mit Interphase-FISH-Analyse nachgewiesen werden. Die in Dysplastische Knoten identifizierten Veränderungen sind Gewinne auf 1q (50% ) sowie Verluste auf 8p und 17p. Daher stellt 1q eine Kandidatenregion für die Identifizierung jener Gene dar, die bereits im frühem Stadium der Hepatokarzinogenese aktiviert sind. Die Gen-Expressionsanalyse eines HCCs mit Gewinnen auf 1q, 8q, und Xq zeigte die Überexpression von einigen Genen, die in den amplifizierten Regionen liegen. Daher kann spekuliert werden, dass die DNA-Amplifikation in der Hepatokarzinogenese bei einigen Genen ein Mechanismus der Aktivierung sein kann. Zusammengefasst konnte somit durch CGH-Analyse charakteristische, genomische Imbalances des HCC ermittelt werden. Der Vergleich mit Veränderungen bei prämalignen Läsionen erlaubt die Unterscheidung früher (prämaligner) und später (progressionsassoziierter) Veränderungen

Studio del processo CVI/CVD per lo sviluppo di compositi ceramici rinforzati a fibra lunga

The most relevant thermo-mechanical properties of SiC or C based CFCCs are high strength, high toughness, low weight, high reliability, thermal shock and fatigue resistance. Thanks to these special characteristics, the CFCCs are the best candidates to substitute metals and monolithic ceramics, traditionally employed to realize components in energy, aeronautic and nuclear fields. Among the commonly techniques for the CFCCs production, CVI still represents the most significant one. Its main advantages are the versatility, the high quality deposits and the fact that it is conducted under mild temperature conditions. On the other hand, this technique is quite complex, therefore the set up of all process parameters needs long development time. The main purpose of the present study was to analyze the parameters controlling the CVD and CVI processes. Specifically, deposition and infiltration of SiC and Py-C tests were conducted on non-porous and porous substrates. The experiments were performed with a pilot size Isothermal/Isobaric CVI plant, designed and developed by ENEA. To guarantee the control of the process parameters, a previously optimization of the plant was needed. Changing temperature, pressure, flow rates and methane/hydrogen ratio, the Py-C deposition rate value, for an optimal fibre/matrix interphase thickness, was determined. It was also underlined the hydrogen inhibiting effect over the Py-C deposition rate. Regarding SiC morphologies, a difference between the inner and outer substrate surfaces was observed, as a consequence of a flow rate non-uniformity. In the case of the Cf/C composites development, the key parameter of the CVI process was the gas residence time. In fact, the hydrogen inhibiting effect was evident only with high value of residence time. Furthermore, lower the residence time more homogeneous the Py-C deposition rate was obtained along the reaction chamber axis. Finally, a CVD and CVI theoretical modelling was performed.

Asynchrone Replikation geprägter und nicht geprägter Chromosomenregionen und Expression relevanter Entwicklungsgene in Präimplantationsembryonen der Maus

Zum besseren Verständnis der epigenetischen Reprogrammierung nach der Befruchtung, wurde in der vorliegenden Studie unter Verwendung eines Interphase-FISH-Assays eine systematische Analyse des Replikationsverhaltens geprägter und nicht geprägter Chromosomenregionen in Präimplantationsembryonen der Maus durchgeführt. Dabei konnte erstmalig gezeigt werden, dass sowohl geprägte als auch nicht geprägte Chromosomen-regionen direkt nach der Befruchtung asynchron replizieren. Vier von fünf nicht geprägten Chromosomenregionen replizierten erst nach dem Zweizell-Embryostadium synchron. Eine asynchrone Replikation geprägter Regionen wurde während der gesamten Präimplantationsentwicklung und in differenzierten Zellen beobachtet. In Morula-Embryonen zeigten der in diesem Stadium nicht exprimierte Dlk1-Gtl2-Locus sowie der biallelisch exprimierte Igf2r-Locus jedoch eine Relaxation der asynchronen Replikation. In einem weiteren Projekt konnte mit Hilfe eines Multiplex-RT-PCR-Ansatzes die sensitive Detektion von multiplen Transkripten in einzelnen Zellen etabliert werden. Anschließend wurden Expressionsmuster von 17 für die epigenetische Reprogrammierung relevanten Entwicklungs-genen in Präimplantationsembryonen sowie in einzelnen Morula-Blastomeren analysiert. Der Transkriptionsfaktor Pou5f1 wurde in allen Präimplantationsembryonen und allen Morula-Blastomeren detektiert, was auf eine uniforme Reaktivierung der Pluripotenz hinweist. Dagegen variierte die mRNA-Expression verschiedener DNA-Cytosin-5-Methyltransferasen, 5-methyl-CpG-Bindeproteine sowie Enzyme der Basenexzisionsreparatur stark zwischen individuellen Zellen des gleichen Embryos und noch stärker zwischen Zellen verschiedener Embryonen. Diese Ergebnisse zeigen, dass sich das für die Reprogrammierungsmaschinerie kodierende Transkriptom zu bestimmten Entwicklungs-zeitpunkten zwischen einzelnen Blastomeren unterscheidet.

Partial Discharge Phenomena in Converter and Traction Transformers: Identification and Reliability

After the development of power electronics converters, the number of transformers subjected to non-sinusoidal stresses (including DC) has increased in applications such as HVDC links and traction (electric train power cars). The effects of non-sinusoidal voltages on transformer insulation have been investigated by many researchers, but still now, there are some issues that must be understood. Some of those issues are tackled in this Thesis, studying PD phenomena behavior in Kraft paper, pressboard and mineral oil at different voltage conditions like AC, DC, AC+DC, notched AC and square waveforms. From the point of view of converter transformers, it was found that the combined effect of AC and DC voltages produces higher stresses in the pressboard that those that are present under pure DC voltages. The electrical conductivity of the dielectric systems in DC and AC+DC conditions has demonstrated to be a critical parameter, so, its measurement and analysis was also taken into account during all the experiments. Regarding notched voltages, the RMS reduction caused by notches (depending on firing and overlap angles) seems to increase the PDIV. However, the experimental results show that once PD activity has incepted, the notches increase PD repetition rate and magnitude, producing a higher degradation rate of paper. On the other hand, the reduction of mineral oil stocks, their relatively low flash point as well as environmental issues, are factors that are pushing towards the use of esters as transformer insulating fluids. This PhD Thesis also covers the study of two different esters with the scope to validate their use in traction transformers. Mineral oil was used as benchmark. The complete set of dielectric tests performed in the three fluids, show that esters behave better than mineral oil in practically all the investigated conditions, so, their application in traction transformers is possible and encouraged.

Design and Fabrication of Bond Wire Micro-Magnetics

This thesis presents a new approach for the design and fabrication of bond wire magnetics for power converter applications by using standard IC gold bonding wires and micro-machined magnetic cores. It shows a systematic design and characterization study for bond wire transformers with toroidal and race-track cores for both PCB and silicon substrates. Measurement results show that the use of ferrite cores increases the secondary self-inductance up to 315 µH with a Q-factor up to 24.5 at 100 kHz. Measurement results on LTCC core report an enhancement of the secondary self-inductance up to 23 µH with a Q-factor up to 10.5 at 1.4 MHz. A resonant DC-DC converter is designed in 0.32 µm BCD6s technology at STMicroelectronics with a depletion nmosfet and a bond wire micro-transformer for EH applications. Measures report that the circuit begins to oscillate from a TEG voltage of 280 mV while starts to convert from an input down to 330 mV to a rectified output of 0.8 V at an input of 400 mV. Bond wire magnetics is a cost-effective approach that enables a flexible design of inductors and transformers with high inductance and high turns ratio. Additionally, it supports the development of magnetics on top of the IC active circuitry for package and wafer level integrations, thus enabling the design of high density power components. This makes possible the evolution of PwrSiP and PwrSoC with reliable highly efficient magnetics.

Charakterisierung und Analyse der geschlechtsbestimmenden Region von Chironomus riparius

Die durch eine männchenspezifisch auftretende heterochromatische Bande und ein hemizygotes Cla-Element-Cluster gekennzeichnete geschlechtsbestimmende Region („sex determining region“: SDR) auf Chromosom III von C. riparius stellt ein frühes Stadium in der Evolution von Geschlechtschromosomen dar. Diese eindeutig lokalisierte chromosomale Region, die den molekular noch unbekannten männchen¬bestimmenden Faktor M enthalten muss, ist im Vergleich zu den Y-Chromosomen anderer Dipterenarten wie unter anderem M. domestica, die ebenfalls einen dominanten Männchenbestimmer besitzen, relativ klein. Aus diesem Grund bietet die SDR von C. riparius eine Möglichkeit, den männchenbestimmenden Faktor einzugrenzen und zu identifizieren. In der vorliegenden Arbeit konnte ein Bereich einer Größe von ca. 200 kb aus der SDR von C. riparius charakterisiert und analysiert werden. Durch bioinformatische Sequenzanalysen konnten an 20 Stellen der SDR mögliche Genstrukturen nachgewiesen werden. Von den gefundenen möglichen Genen ist bisher die Funktion in C. riparius unbekannt. Bei den Genen mit vermuteter Funktion deutet nichts eindeutig auf eine Beteiligung an der Geschlechtsbestimmung von C. riparius hin. Da allerdings davon auszugehen ist, dass für die Funktion des Männchenbestimmers M ein Gen rekrutiert wurde, welches zur Interaktion mit dem nachgeschalteten Gen der Geschlechts¬bestimmungskaskade fähig ist, muss die geschlechtsbestimmende Funktion des Gens M nicht unbedingt offensichtlich sein. Aus geschlechtsbestimmenden Genkaskaden anderer Dipteren bekannte Gene wie transformer und doublesex konnten im analysierten Bereich nicht nachgewiesen werden, obwohl zumindest zu doublesex homologe Gene im Genom von C. riparius vorkommen. Um möglicherweise proto-X- und proto-Y-Chromosom miteinander vergleichen zu können und einen Hinweis auf die chromosomale Herkunft der analysierten Sequenzen aus der SDR zu erlangen, wurden Sequenzen von 31 teilweise parallel liegenden BAC-Klonen aus der untersuchten Region verglichen. Dabei zeigte sich, dass die Klone zwei Gruppen bilden, deren Sequenzen sich durch 500 SNPs und 110 Indels unterschiedlicher Größe (1-800 Bp) unterscheiden, was für eine Herkunft von zwei sich erst seit kurzer Zeit unterscheidenden Geschlechtschromosomen spricht. Die zwölf größten dieser Indels wurden auf geschlechtsspezifische Unterschiede hin untersucht. Dabei zeigte sich, dass die Unterschiede zwischen den beiden Klongruppen zwar im 30 Jahre alten Laborstamm, der auch für die Konstruktion der durchsuchten BAC-Bibliotheken verwendet wurde, tatsächlich geschlechtsspezifisch sind, in zwei Wildfangpopulationen jedoch keine derartige Geschlechtsspezifität aufweisen. Somit kann keine Aussage zur Herkunft der untersuchten Klone aus der SDR von C. riparius getroffen werden, und es bleibt unklar, ob die analysierten Sequenzen vom proto-X oder vom proto-Y-Chromosom stammen.

Charakterisierung der Proteine CEP164 und ppdpf sowie deren Einordnung in den mitotischen Kontext

Eine regelgerechte bipolare Mitose und die fehlerfreie Aufteilung duplizierter DNA ist die Voraussetzung für die Entwicklung aller Lebewesen. Treten Fehler bei diesem grundsätzlichen Prozess auf, ist entweder der Zelltod oder die maligne Entartung der Zelle die Folge. Daher ist es von zentraler Bedeutung, die Vorgänge während der Zellteilung zu verstehen und die Funktion der an diesem Prozess beteiligten Proteine aufzudecken. Im Vorfeld dieser Arbeit wurden im Rahmen eines siRNA-Screens genomweit alle Proteine durch RNA-Interferenz depletiert und die Mitosen nach erfolgter RNAi phänotypisch untersucht. Ein besonderes Augenmerk lag dabei auf der Entwicklung multipolarer Spindeln durch Defekte in der Zentrosomenbündelung. Dadurch wurden unter anderem die Proteine CEP164 und ppdpf identifiziert. Da weder für CEP164 noch für ppdpf mitotische Funktionen bekannt sind, war es Ziel dieser Arbeit, die beiden Proteine eingehender zu charakterisieren und in den Kontext der Mitose einzuordnen. rnIm Rahmen der vorliegenden Arbeit konnte gezeigt werden, dass CEP164 einer komplexen mitotischen Regulation unterliegt. Die in Interphase durchweg zentrosomale Lokalisation von CEP164 geht in der Mitose verloren. Es wird demonstriert, dass CEP164 während der Mitose unter anderem von CDK1 phosphoryliert wird und des Weiteren ubiquitinyliert wird. Als Interaktionspartner wurde das zentrosomale Protein Ninein identifiziert und demonstriert, dass sich CEP164 mit diesem in einem Komplex von ~2MDA befindet. Als weiterer Interaktionspartner wurde das Ninein-like-Protein ermittelt. Im Hinblick auf die Induktion multipolarer Mitosen wurde gezeigt, dass die Depletion von CEP164 nicht dafür verantwortlich ist. Die Induktion multipolarer Spindeln ist stattdessen darin begründet, dass durch die Transfektion einer siRNA gegen CEP164 auch ein für die Ausbildung der mitotischen Spindel elementares Protein, Ch-TOG, depletiert wird.rnIm Gegensatz dazu wurde im Rahmen dieser Arbeit bestätigt, dass das Protein ppdpf eine wichtige mitotische Funktion übernimmt. Zwar führt die Depletion von ppdpf nur zu einer sehr geringen Zunahme multipolarer Mitosen, allerdings steigt die Zahl aberranter Mitosen deutlich an, während die Spannung innerhalb mitotischer Spindeln abnimmt. Desweiteren konnte nachgewiesen werde, dass ppdpf-RNAi die Entwicklung von „lagging chromosomes“ und nachfolgend von Mikrokernen begünstigt. Es wurde gezeigt, dass ppdpf während der Mitose an Spindelmikrotubuli lokalisiert und spezifisch acetyliertes Tubulin bindet. Diese Interaktion hatte allerdings keinen Einfluss auf die Stabilität von Mikrotubuli während der Mitose. Das Protein ppdpf interagiert zudem mit dem Kinesin Eg5, wobei ppdpf-RNAi allerdings nicht zu einer Modulation der Aktivität von Eg5 zu führen scheint. Inwiefern diese Eigenschaften die Entwicklung von „lagging chromosomes“ begünstigen ist derzeit noch offen.

CD40 ligation protects bronchial epithelium against oxidant-induced caspase-independent cell death

CD40 and its ligand regulate pleiotropic biological responses, including cell proliferation, differentiation, and apoptosis. In many inflammatory lung diseases, tissue damage by environmental or endogenous oxidants plays a major role in disease pathogenesis. As the epithelial barrier is a major target for these oxidants, we postulated that CD40, the expression of which is increased in asthma, plays a role in the regulation of apoptosis of bronchial epithelial cells exposed to oxidants. Using 16HBE 14o- cells exposed to oxidant stress, we found that ligation of CD40 (induced by G28-5 monoclonal antibodies) enhanced cell survival and increased the number of cells in G2/M (interphase between DNA synthesis and mitosis) of the cell cycle. This was associated with NF-kappaB and activator protein-1 activation and increased expression of the inhibitor of apoptosis, c-IAP1. However, oxidant stress-induced apoptosis was found to be caspase- and calpain-independent implicating CD40 ligation as a regulator of caspase-independent cell death. This was confirmed by the demonstration that CD40 ligation prevented mitochondrial release and nuclear translocation of apoptosis inducing factor. In conclusion, we demonstrate a novel role for CD40 as a regulator of epithelial cell survival against oxidant stress. Furthermore, we have identified, for the first time, an endogenous inhibitory pathway of caspase-independent cell death.

Nanomechanics of cellulose crystals and cellulose-based polymer composites

Cellulose-polymer composites have potential applications in aerospace and transportation areas where lightweight materials with high mechanical properties are needed. In addition, these economical and biodegradable composites have been shown to be useful as polymer electrolytes, packaging structures, optoelectronic devices, and medical implants such as wound dressing and bone scaffolds. In spite of the above mentioned advantages and potential applications, due to the difficulties associated with synthesis and processing techniques, application of cellulose crystals (micro and nano sized) for preparation of new composite systems is limited. Cellulose is hydrophilic and polar as opposed to most of common thermoplastics, which are non-polar. This results in complications in addition of cellulose crystals to polymer matrices, and as a result in achieving sufficient dispersion levels, which directly affects the mechanical properties of the composites. As in other composite materials, the properties of cellulose-polymer composites depend on the volume fraction and the properties of individual phases (the reinforcement and the polymer matrix), the dispersion quality of the reinforcement through the matrix and the interaction between CNCs themselves and CNC and the matrix (interphase). In order to develop economical cellulose-polymer composites with superior qualities, the properties of individual cellulose crystals, as well as the effect of dispersion of reinforcements and the interphase on the properties of the final composites should be understood. In this research, the mechanical properties of CNC polymer composites were characterized at the macro and nano scales. A direct correlation was made between: Dispersion quality and macro-mechanical properties Nanomechanical properties at the surface and tensile properties CNC diameter and interphase thickness Lastly, individual CNCs from different sources were characterized and for the first time size-scale effect on their nanomechanical properties were reported. Then the effect of CNC surface modification on the mechanical properties was studied and correlated to the crystalline structure of these materials.

The Electrodeposition of Iron-Manganese Alloys

An electrodeposition of an iron-manganese alloy was made from the same conditions determined by previous re­search. Various addition agents were experimented with in an attempt to produce better conditions for electro-deposition. It was found advantageous to add small a­mounts of sodium lauryl sulfate and ammonium sulfite to the electrolyte.

A NOVEL FUNCTION FOR AURORA B KINASE IN THE REGULATION OF P53 BY PHOSPHORYLATION

The mitotic kinase Aurora B plays a pivotal role in mitosis and cytokinesis and governs the spindle assembly checkpoint which ensures correct chromosome segregation and normal progression through mitosis. Aurora B is overexpressed in breast and other cancers and may be an important molecular target for chemotherapy. Tumor suppressor p53 is the guardian of the genome and an important negative regulator of the cell cycle. Previously, it was unknown whether Aurora B and p53 had mutual regulation during the cell cycle. A small molecule specific inhibitor of Aurora B, AZD1152, gave us an indication that Aurora B negatively impacted p53 during interphase and mitosis. Here, we show the antineoplastic activity of AZD1152 in six human breast cancer cell lines, three of which overexpress HER2. AZD1152 specifically inhibited Aurora B kinase activity, thereby causing mitotic catastrophe, polyploidy and apoptosis, which in turn led to apoptotic death. Further, AZD1152 administration efficiently suppressed tumor growth in orthotopic and metastatic breast cancer cell xenograft models. Notably, it was found that the protein level of Aurora B kinase declined after inhibition of Aurora B kinase activity. Investigation of the underlying mechanism suggested that AZD1152 accelerated the protein turnover of Aurora B by enhancing its ubiquitination. As a consequence of inhibition of Aurora B, p53 levels were increased in tissue culture and murine models. This hinted at a possible direct interaction between p53 and Aurora B. Indeed, it was found that p53 and Aurora B exist in complex and interact directly during interphase and at the centromere in mitosis. Further, Aurora B was shown to phosphorylate p53 at several serine/threonine residues in the DNA binding domain and these events caused downregulation of p53 levels via ubiquitination mediated by Mdm2. Importantly, phosphorylation of threonine 211 was shown to reduce p53’s transcriptional activity while other phosphorylation sites did not. On a functional level, Aurora B was shown to reduce p53’s capacity to mediate apoptosis in response to the DNA damaging agent, cisplatin. These results define a novel mechanism for p53 inactivation by Aurora B and imply that oncogenic hyperactivation or overexpression of Aurora B may compromise p53’s tumor suppressor function.