Valutazione del rischio ecologico e sviluppo di strategie innovative per il monitoraggio della qualita’ dei corpi idrici: applicazione di un nuovo approccio integrato in un bacino pilota.

Freshwater is extremely precious; but even more precious than freshwater is clean freshwater. From the time that 2/3 of our planet is covered in water, we have contaminated our globe with chemicals that have been used by industrial activities over the last century in a unprecedented way causing harm to humans and wildlife. We have to adopt a new scientific mindset in order to face this problem so to protect this important resource. The Water Framework Directive (European Parliament and the Council, 2000) is a milestone legislative document that transformed the way that water quality monitoring is undertaken across all Member States by introducing the Ecological and Chemical Status. A “good or higher” Ecological Status is expected to be achieved for all waterbodies in Europe by 2015. Yet, most of the European waterbodies, which are determined to be at risk, or of moderate to bad quality, further information will be required so that adequate remediation strategies can be implemented. To date, water quality evaluation is based on five biological components (phytoplankton, macrophytes and benthic algae, macroinvertebrates and fishes) and various hydromorphological and physicochemical elements. The evaluation of the chemical status is principally based on 33 priority substances and on 12 xenobiotics, considered as dangerous for the environment. This approach takes into account only a part of the numerous xenobiotics that can be present in surface waters and could not evidence all the possible causes of ecotoxicological stress that can act in a water section. The mixtures of toxic chemicals may constitute an ecological risk not predictable on the basis of the single component concentration. To improve water quality, sources of contamination and causes of ecological alterations need to be identified. On the other hand, the analysis of the community structure, which is the result of multiple processes, including hydrological constrains and physico-chemical stress, give back only a “photograph” of the actual status of a site without revealing causes and sources of the perturbation. A multidisciplinary approach, able to integrate the information obtained by different methods, such as community structure analysis and eco-genotoxicological studies, could help overcome some of the difficulties in properly identifying the different causes of stress in risk assessment. In synthesis, the river ecological status is the result of a combination of multiple pressures that, for management purposes and quality improvement, have to be disentangled from each other. To reduce actual uncertainty in risk assessment, methods that establish quantitative links between levels of contamination and community alterations are needed. The analysis of macrobenthic invertebrate community structure has been widely used to identify sites subjected to perturbation. Trait-based descriptors of community structure constitute a useful method in ecological risk assessment. The diagnostic capacity of freshwater biomonitoring could be improved by chronic sublethal toxicity testing of water and sediment samples. Requiring an exposure time that covers most of the species’ life cycle, chronic toxicity tests are able to reveal negative effects on life-history traits at contaminant concentrations well below the acute toxicity level. Furthermore, the responses of high-level endpoints (growth, fecundity, mortality) can be integrated in order to evaluate the impact on population’s dynamics, a highly relevant endpoint from the ecological point of view. To gain more accurate information about potential causes and consequences of environmental contamination, the evaluation of adverse effects at physiological, biochemical and genetic level is also needed. The use of different biomarkers and toxicity tests can give information about the sub-lethal and toxic load of environmental compartments. Biomarkers give essential information about the exposure to toxicants, such as endocrine disruptor compounds and genotoxic substances whose negative effects cannot be evidenced by using only high-level toxicological endpoints. The increasing presence of genotoxic pollutants in the environment has caused concern regarding the potential harmful effects of xenobiotics on human health, and interest on the development of new and more sensitive methods for the assessment of mutagenic and cancerogenic risk. Within the WFD, biomarkers and bioassays are regarded as important tools to gain lines of evidence for cause-effect relationship in ecological quality assessment. Despite the scientific community clearly addresses the advantages and necessity of an ecotoxicological approach within the ecological quality assessment, a recent review reports that, more than one decade after the publication of the WFD, only few studies have attempted to integrate ecological water status assessment and biological methods (namely biomarkers or bioassays). None of the fifteen reviewed studies included both biomarkers and bioassays. The integrated approach developed in this PhD Thesis comprises a set of laboratory bioassays (Daphnia magna acute and chronic toxicity tests, Comet Assay and FPG-Comet) newly-developed, modified tacking a cue from standardized existing protocols or applied for freshwater quality testing (ecotoxicological, genotoxicological and toxicogenomic assays), coupled with field investigations on macrobenthic community structures (SPEAR and EBI indexes). Together with the development of new bioassays with Daphnia magna, the feasibility of eco-genotoxicological testing of freshwater and sediment quality with Heterocypris incongruens was evaluated (Comet Assay and a protocol for chronic toxicity). However, the Comet Assay, although standardized, was not applied to freshwater samples due to the lack of sensitivity of this species observed after 24h of exposure to relatively high (and not environmentally relevant) concentrations of reference genotoxicants. Furthermore, this species demonstrated to be unsuitable also for chronic toxicity testing due to the difficult evaluation of fecundity as sub-lethal endpoint of exposure and complications due to its biology and behaviour. The study was applied to a pilot hydrographic sub-Basin, by selecting section subjected to different levels of anthropogenic pressure: this allowed us to establish the reference conditions, to select the most significant endpoints and to evaluate the coherence of the responses of the different lines of evidence (alteration of community structure, eco-genotoxicological responses, alteration of gene expression profiles) and, finally, the diagnostic capacity of the monitoring strategy. Significant correlations were found between the genotoxicological parameter Tail Intensity % (TI%) and macrobenthic community descriptors SPEAR (p<0.001) and EBI (p<0.05), between the genotoxicological parameter describing DNA oxidative stress (ΔTI%) and mean levels of nitrates (p<0.01) and between reproductive impairment (Failed Development % from D. magna chronic bioassays) and TI% (p<0.001) as well as EBI (p<0.001). While correlation among parameters demonstrates a general coherence in the response to increasing impacts, the concomitant ability of each single endpoint to be responsive to specific sources of stress is at the basis of the diagnostic capacity of the integrated approach as demonstrated by stations presenting a mismatch among the different lines of evidence. The chosen set of bioassays, as well as the selected endpoints, are not providing redundant indications on the water quality status but, on the contrary, are contributing with complementary pieces of information about the several stressors that insist simultaneously on a waterbody section providing this monitoring strategy with a solid diagnostic capacity. Our approach should provide opportunities for the integration of biological effects into monitoring programmes for surface water, especially in investigative monitoring. Moreover, it should provide a more realistic assessment of impact and exposure of aquatic organisms to contaminants. Finally this approach should provide an evaluation of drivers of change in biodiversity and its causalities on ecosystem function/services provision, that is the direct and indirect contributions to human well-being.

Managing innovative manufacturing

Editorial: The Managing Innovative Manufacturing (MIM) conference series started in 1993 in the UK. The first MIM conference was held at Keele University and, as from the second MIM at Leicester University in 1996, it became a biennial event with the University of Nottingham and Aston University hosting, respectively, the third and fourth conferences. The main areas of interest of the MIM conference series are: Manufacturing Strategy; Technology & Innovation Management; Human Resource Management; Organisation of Work; Product Design; Operations Planning and Control; Supply Chain Management; Performance Management. This special issue of the International Journal of Technology Management is based on selected papers from MIM2000 at Aston University, where it was organised by Aston Business School. The special theme of the Aston conference was Responsive Production and the Agile Enterprise. Altogether 82 papers were presented in parallel sessions. The eight papers included here were selected from the ‘Technology and Innovation’ stream. They have all been independently reviewed and revised before being accepted for publication. The authors of these papers are from the UK, Ireland, Turkey, the USA, the Netherlands and Hong Kong. They address a wide range of issues within the overall scope of Technology and Innovation with some papers having a geographical or sector focus and others being more general in nature. Participation in the MIM conferences has become increasingly international and to reflect this, the 2002 event is leaving the UK and being held at the University of Wisconsin-Milwaukee, in the USA. It is planned to hold the following MIM at the University of Aalborg, Denmark, in 2004.

A study of inputs and their influence on technological innovative activity

Technological innovation has been widely studied: however surprisingly little is known about the experience of managing the process. Most reports tend to be generalistic and/or prescriptive whereas it is argued that multiple sources of variation in the process limit the value of these. A description of the innovation process is given together with a presentation of what is knovrn from existing studies. Gaps identified in this area suggest that a variety of organisational influences are important and an attempt is made to identify some of these at individual, group and organisational level. A simple system model of the innovation management process is developed. Further investigation of the influence of these factors was made possible through an extended on-site case study. Methodology for this based upon participant observation coupled wth a wide and flexible range of techniques is described. Evidence is presented about many aspects of the innovation process from a number of different levels and perspectives: the attempt is to demonstrate the extent to which variation due to contingent influences takes place. It is argued that problems identified all relate to the issue of integration. This theme is also developed from an analytical viewoint and it is suggested that organisational response to increases in complexity in the external environment will be to match them with internal complexity. Differentiation of this kind will require extensive and flexible integration, especially in those inherently uncertain areas associated with innovation. Whilst traditionally a function of management, it is argued that integration needs have increased to the point where a new specialism is required. The concept of integration specialist is developed from this analysis and attempts at simple integrative change during the research are described. Finally a strategy for integration - or rather for building in integrative capability - ln the organisation studied is described.

Faces of pricing and profit planning at the doorstep of the EU: government pricing policy in the innovative pharmaceutical sector in Turkey

The majority of research on the pharmaceutical sector has focused on an overall micro economic, medical oriented welfare issues, whereas the marketing management role of the innovative drug manufacturer has to a large extent been disregarded. Using the case of Turkey, through a series of in-depth interviews with highly innovative companies, other marketing management possibilities to develop pricing strategies and plan for profit are explored based on broader definitions of value and transparency. Our results suggest that pharmaceutical companies as well as governments might have a too narrow focus of value and underestimate the potential long term benefits of a broader approach to marketing management and long term relationships between the various stakeholders.

Twelve steps to heaven:successfully managing change through developing innovative teams

In this article we propose that work teams implement many of the innovative changes required to enable organizations to respond appropriately to the external environment. We describe how, using an input?–?process?–?output model, we can identify the key elements necessary for developing team innovation. We propose that it is the implementation of ideas rather than their development that is crucial for enabling organizational change. Drawing on theory and relevant research, 12 steps to developing innovative teams are described covering key aspects of the team task, team composition, organizational context, and team processes.

Innovative measurement methodology in the study of weathering of automotive coatings

An initial aim of this project was to evaluate the conventional techniques used in the analysis of newly prepared environmentally friendly water-borne automotive coatings and compare them with solvent-borne coatings having comparable formulations. The investigation was carried out on microtuned layers as well as on complete automotive multi-layer paint systems. Methods used included the very traditional methods of gloss and hardness and the commonly used photo-oxidation index (from FTIR spectral analysis). All methods enabled the durability to weathering of the automotive coatings to be initially investigated. However, a primary aim of this work was to develop methods for analysing the early stages of chemical and property changes in both the solvent-borne and water-borne coating systems that take place during outdoor natural weathering exposures and under accelerated artificial exposures. This was achieved by using dynamic mechanical analysis (DMA), in both tension mode on the microtomed films (on all depths of the coating systems from the uppermost clear-coat right down to the electron-coat) and bending mode of the full (unmicrotomed) systems, as well as MALDI-Tof analysis on the movement of the stabilisers in the full systems. Changes in glass transition temperature and relative cross-link density were determined after weathering and these were related to changes in the chemistries of the binder systems of the coatings after weathering. Concentration profiles of the UV-stabilisers (UVA and HALS) in the coating systems were analysed as a consequence of migration in the coating systems in separate microtomed layers of the paint samples (depth profiling) after weathering and diffusion co-efficient and solubility parameters were determined for the UV stabilisers in the coating systems. The methods developed were used to determine the various physical and chemical changes that take place during weathering of the different (water-borne and solvent-borne) systems (photoxidation). The solvent-borne formulations showed less changes after weathering (both natural and accelerated) than the corresponding water-borne formulations due to the lower level of cross-links in the binders of the water-borne systems. The silver systems examined were more durable than the blue systems due to the reflecting power of the aluminium and the lower temperature of the silver coatings.

The effectiveness of an innovative intervention aimed at reducing binge drinking among young people:results from a pilot study

Aims: To assess the effectiveness of a digital-story intervention (short videos made by young people) seeking to reduce the prevalence of young people's binge drinking in Caerphilly. Method: A quasi-experimental design was adopted with three intervention sites and one control site providing the sample (mainly aged 1415 years). Three rounds of self-completion questionnaires, completed prior (T1), immediately after (T2) and 6 months after the intervention (T3). Findings: A total of 1031 questionnaires completed across the three time-points. Two-factor ANOVAs revealed a positive effect on knowledge for the intervention sample. The intervention group results showed stable attitudes towards drinking at the three time-points whilst the control group showed increasing positive attitudes towards drunkenness over the same time period. Intentions towards drunkenness were higher in the control group than the intervention group at T2 (ControlT1 Mean 3.37, T2 Mean 3.90; interventionT1 Mean 3.26, T2 Mean 3.29). Intervention participants got drunk on fewer occasions in the last week (mean occasions last week 1.57) compared to control participants (mean occasions last week 2.00), with the difference approaching statistical significance (F 1.90, p 0.07). Conclusions: Promoting negative attitudes towards drunkenness, alongside a greater sense of control and potential regret about drunkenness are likely to be important factors when considering how to change people's intentions to drink. The study shows the potential to reduce the frequency of drinking behaviour when intentions are changed, and provides recommendations for future interventions of this nature. © 2010 Informa UK Ltd.

Heritage and innovative learning approaches:an alternative approach to engineering education

Over recent years, the role of engineering in promoting a sustainable society has received much public attention [1] with particular emphasis given to the need to promote the future prosperity and security of society through the recruitment and education of more engineers [2,3]. From an employment perspective, the Leitch Review [4] suggested that ‘generic’ transferable employability skills development should constitute a more substantial part of university education. This paper argues that the global drivers impacting engineering education [5] correlate strongly to those underpinning the Leitch review, therefore the question of how to promote transferable employability skills within the wider engineering curriculum is increasingly relevant. By exploring the use of heritage in the engineering curriculum as a way to promote learning and engage students, a less familiar approach to study is discussed. This approach moves away from stereotypical notions of the use of information technology as representing the pinnacle of innovation in education. Taking the student experience as its starting point, the paper draws upon the findings of an exploratory study critically analysing the pedagogical value of using heritage in engineering education. It discusses a teaching approach in which engineering students are taken out of their ‘comfort zone’ - away from the classroom, laboratory and computer, to a heritage site some 100 miles away from the university. The primary learning objective underpinning this approach is to develop students’ transferable skills by encouraging them to consider how to apply theoretical concepts to a previously unexplored situation. By reflecting upon students’ perceptions of the value of this approach, and by identifying how heritage may be utilised as an innovative learning and teaching approach in engineering education, this paper makes a notable contribution to current pedagogical debates in the discipline.