Using the Driver Behaviour Questionnaire to predict crashes and demerit point loss : does it get better with larger sample sizes?

The Driver Behaviour Questionnaire (DBQ) continues to be the most widely utilised self-report scale globally to assess crash risk and aberrant driving behaviours among motorists. However, the scale also attracts criticism regarding its perceived limited ability to accurately identify those most at risk of crash involvement. This study reports on the utilisation of the DBQ to examine the self-reported driving behaviours (and crash outcomes) of drivers in three separate Australian fleet samples (N = 443, N = 3414, & N = 4792), and whether combining the samples increases the tool’s predictive ability. Either on-line or paper versions of the questionnaire were completed by fleet employees in three organisations. Factor analytic techniques identified either three or four factor solutions (in each of the separate studies) and the combined sample produced expected factors of: (a) errors, (b) highway-code violations and (c) aggressive driving violations. Highway code violations (and mean scores) were comparable across the studies. However, across the three samples, multivariate analyses revealed that exposure to the road was the best predictor of crash involvement at work, rather than DBQ constructs. Furthermore, combining the scores to produce a sample of 8649 drivers did not improve the predictive ability of the tool for identifying crashes (e.g., 0.4% correctly identified) or for demerit point loss (0.3%). The paper outlines the major findings of this comparative sample study in regards to utilising self-report measurement tools to identify “at risk” drivers as well as the application of such data to future research endeavours.

The influence of fleet safety climate on occupational driver behaviours

The concepts of traffic safety culture and climate hold considerable impact on road safety outcomes. Data sourced from four Australian organisations revealed a five factor structure that was consistent with previous research, which were: management commitment; work demands; relationships; appropriateness of rules; and communication. Correlation and regression analyses were conducted to identify which aspects of fleet safety climate were related to driver behaviours. The findings suggest that organisations may be able to reduce the likelihood of employees engaging in unsafe driving behaviours as a result of fatigue or distractions through increasing aspects of fleet safety climate, including: management commitment; level of trust; safety communication; appropriateness of work demands; and appropriateness of safety policies and procedures. To assist practitioners in enhancing fleet safety climate and managing occupational road risks, recommendations are made based on these findings, such as fostering a supportive environment of mutual responsibility.

Challenges in improving chronic disease survivorship outcomes using tele-health and self-managed online solutions

The advances in modern information and communication (ICT) technology continue to address the challenges and improve` health outcomes for the survivors of chronic disease such as prostate cancer. The management of survivorship is increasingly becoming an important need for the survivors to manage their chronic conditions. The technology interventions such as tele-health as well as self-managed technology applications have shown a potential to improve survivorship outcomes. However, the application of these tools should be supported by strong health economics evidence. This work discusses the challenges of technology led survivorship care models and presents an integrated approach to address these challenges.

Making informed decisions on selecting promising Work Zone Safety Treatments

Lack of detailed and accurate safety records on incidents in Australian work zones prevents a thorough understanding of the relevant risks and hazards. Consequently it is difficult to select appropriate treatments for improving the safety of roadworkers and motorists alike. This paper presents a method for making informed decisions about safety treatments by 1) identifying safety issues and hazards in work zones, 2) understanding the attitudes and perceptions of both roadworkers and motorists, 3) reviewing the effectiveness of work zone safety treatments according to existing research, and 4) incorporating local expert opinion on the feasibility and usefulness of the safety treatments. Using data collected through semi-structured interviews with roadwork personnel and online surveys of Queensland drivers, critical safety issues were identified. The effectiveness of treatments for addressing the issues was understood through rigorous literature review and consultations with local road authorities. Promising work zone safety treatments include enforcement, portable rumble strips, perceptual measures to imply reduced lane width, automated or remotely-operated traffic lights, end of queue measures, and more visible and meaningful signage.

Understanding causal relationships between the built and social environment, health and associated behaviours and risk factors

Introduction: Built environment interventions designed to reduce non-communicable diseases and health inequity, complement urban planning agendas focused on creating more ‘liveable’, compact, pedestrian-friendly, less automobile dependent and more socially inclusive cities.However, what constitutes a ‘liveable’ community is not well defined. Moreover, there appears to be a gap between the concept and delivery of ‘liveable’ communities. The recently funded NHMRC Centre of Research Excellence (CRE) in Healthy Liveable Communities established in early 2014, has defined ‘liveability’ from a social determinants of health perspective. Using purpose-designed multilevel longitudinal data sets, it addresses five themes that address key evidence-base gaps for building healthy and liveable communities. The CRE in Healthy Liveable Communities seeks to generate and exchange new knowledge about: 1) measurement of policy-relevant built environment features associated with leading non-communicable disease risk factors (physical activity, obesity) and health outcomes (cardiovascular disease, diabetes) and mental health; 2) causal relationships and thresholds for built environment interventions using data from longitudinal studies and natural experiments; 3) thresholds for built environment interventions; 4) economic benefits of built environment interventions designed to influence health and wellbeing outcomes; and 5) factors, tools, and interventions that facilitate the translation of research into policy and practice. This evidence is critical to inform future policy and practice in health, land use, and transport planning. Moreover, to ensure policy-relevance and facilitate research translation, the CRE in Healthy Liveable Communities builds upon ongoing, and has established new, multi-sector collaborations with national and state policy-makers and practitioners. The symposium will commence with a brief introduction to embed the research within an Australian health and urban planning context, as well as providing an overall outline of the CRE in Healthy Liveable Communities, its structure and team. Next, an overview of the five research themes will be presented. Following these presentations, the Discussant will consider the implications of the research and opportunities for translation and knowledge exchange. Theme 2 will establish whether and to what extent the neighbourhood environment (built and social) is causally related to physical and mental health and associated behaviours and risk factors. In particular, research conducted as part of this theme will use data from large-scale, longitudinal-multilevel studies (HABITAT, RESIDE, AusDiab) to examine relationships that meet causality criteria via statistical methods such as longitudinal mixed-effect and fixed-effect models, multilevel and structural equation models; analyse data on residential preferences to investigate confounding due to neighbourhood self-selection and to use measurement and analysis tools such as propensity score matching and ‘within-person’ change modelling to address confounding; analyse data about individual-level factors that might confound, mediate or modify relationships between the neighbourhood environment and health and well-being (e.g., psychosocial factors, knowledge, perceptions, attitudes, functional status), and; analyse data on both objective neighbourhood characteristics and residents’ perceptions of these objective features to more accurately assess the relative contribution of objective and perceptual factors to outcomes such as health and well-being, physical activity, active transport, obesity, and sedentary behaviour. At the completion of the Theme 2, we will have demonstrated and applied statistical methods appropriate for determining causality and generated evidence about causal relationships between the neighbourhood environment, health, and related outcomes. This will provide planners and policy makers with a more robust (valid and reliable) basis on which to design healthy communities.

Common hazards and their mitigating measures in work zones : a qualitative study of worker perceptions

Road construction and maintenance activities present challenges for ensuring the safety of workers and the traveling public alike. Hazards in work zones are typically studied using historical crash records but the current study took a qualitative approach by interviewing 66 workers from various work zones in Queensland, Australia. This supplemented and enhanced the limited available data regarding the frequency and nature of work zone crashes in Australia, provided worker insights into contributing factors, and assessed their opinions on the likely effectiveness of current or future approaches to hazard mitigation. Workers may not be aware of objective data regarding effectiveness, but their attitudes and consequent levels of compliance can influence both the likelihood of implementation and the outcomes of safety measures. Despite the potential importance of worker perceptions, they have not been studied comprehensively to date, and thus this study fills a significant gap in the literature. Excessive vehicle speeds, driver distraction and aggression towards roadworkers, working in wet weather, at night and close to traffic stream were among the most common hazards noted by workers. The safety measures perceived to be most effective included police presence, active enforcement, and improving driver awareness and education about work zones. Worker perceptions differed according to their level of exposure to hazards.

Labour Law and Labour Market Regulation

The traditional boundaries of labour law are becoming outmoded in a modern world in which active labour market participants vastly outnumber “employees”, and the world of work extends way beyond the workplace gate. There is convergence with labour market regulation. The contract of employment remains central but is no longer the sole object of study.Labour Law and Labour Market Regulation reflects the dramatically different industrial, social, political and legislative contexts in which the law now operates and the intellectual revolution this is generating. Individual chapters contain studies of regulation within prescriptive government schemes, contract networks, specialist labour markets, the intersection between work and family, enterprise policies and practices, and the courts and tribunals. The book provides insights into areas that are, as arbitration declines, becoming increasingly important to their clients' interests. The most recent legislation and jurisprudence is discussed in many chapters including discrimination, dismissals, health and safety, immigration, social security, franchise, volunteer and contract law.

The relationship between 'reasonably practicable'and risk management regulation

This paper examines two concepts which are central to contemporary standard setting in occupational health and safety (OHS) regulation, and explores the differences and similarities between these concepts – the notion of ‘reasonably practicable’ which qualifies the ‘general duties’ and some other provisions in the Australian OHS standards, and the risk management requirements typically found in OHS regulations and approved codes of practice (advisory standards in Queensland).

Exploring the re-criminalising of OHS breaches in the context of industrial death

Since the 1980s the calls for further criminalisation of organisational conduct causing harm to workers, the public and the environment have intensified in Australia, Canada and England and Wales.' One focal point of this movement has been the criminal law's response to organisations (and their personnel) failing to comply with occupational health and safety ('OHS') standards, particularly when physical harm (death and serious injury) has resulted from those breaches. Some governments have responded with proposals to enable manslaughter prosecutions to be initiated 'more effectively' against organisations causing the deaths of workers or, in some cases, members of the public (Archibald et al, 2004; Haines and Hall, 2004; Hall et al, 2004; Tombs and Whyte, 2003). In Australia governments have also increased monetary penalties for regulatory OHS offences, a few have introduced other contemporary organisational sanctions, and some have initiated OHS prosecutions more vigorously and with larger fines.

OHS inspectors and psychosocial risk factors: Evidence from Australia

Legislation giving prominence to psychosocial risk factors at work has changed the role of government occupational health and safety (OHS) inspectors in many countries. Yet little is known about how inspectorates have responded to these changes. Between 2003 and 2007 an Australian study was undertaken on OHS standards, entailing detailed documentary analysis, interviews with 36 inspectorate managers and 89 inspectors, and observations made when researchers accompanied inspectors on 120 typical workplace visits. Our study found that general duty provisions in OHS legislation clearly incorporated psychosocial hazards and inspectorates had introduced guidance material, pursued campaigns and increased interventions in this area. However, the regulatory framework remained narrow (focused on bullying/harassment, occupational violence and work stress) and workplace visits revealed psychosocial hazards as a marginal area of inspectorate activity. These findings were reinforced in interviews. While aware of psychosocial hazards inspectors often saw the issue as problematic due to limited training, resourcing constraints, deficiencies in regulation and fears of victimisation amongst workers. In order to address these problems a number of changes are required that recognize the distinctiveness of psychosocial hazards including their ‘invisibility’. Notable here are revisions to regulation (both general duty provisions and specific codes), the development of comprehensive guidance and assessment tools to be used by inspectors, greater use of procedural enforcement, and enhanced inspectorate resourcing and training. There is also a need to recognize complex inter-linkages between psychosocial hazards and the industrial relations context.

OHS liability, corporate officers and corporate groups

This article examines the new model for corporate officer liability under section 144 of the Occupational Health and Safety Act 2004 (Vic), and explores the extent to which this might effectively extend responsibility for OHS offences to members of corporate groups, such as holding companies. In doing so, the authors canvass the failure of corporate law to impose such obligations on corporate officers in general, and on holding companies as shadow officers. It is argued that provisions such as section 144 of the Victorian Act should be included in all OHS legislation.

Volunteering and recent governance reforms

The regulatory reforms touching volunteer governs over the last 25 years are identified and analysed. BOth direct reforms such as the Australian Charities and Not-for-profits Commission's (ACNC) governance standards and society--wide indirect reforms to workplace health and safety, civil liability and deemed liability provisions are discussed in this chapter.

Applying the Haddon Matrix in the context of work-related road safety

The Haddon Matrix was developed in the 1960s road safety arena, and has since been used in many public health settings. The literature and two specific case studies are reviewed to describe the background to the Haddon Matrix, identify how it has been critiqued and developed over time and practical applications in the work-related road safety context. Haddon’s original focus on the road, vehicle and driver has been extended and applied to include organisational safety culture, journey management and wider issues in society that affect occupational drivers and the communities in which they work. The paper shows that the Haddon Matrix has been applied in many projects and contexts. Practical work-related road safety applications include providing a comprehensive systems-based safety management framework to inform strategy. It has also been used to structure the review or gap analysis of current programs and processes, identify and develop prevention measures and as a tool for effective post-event investigations.

Work zone items influencing driver speeds at roadworks: worker, driver and expert perspectives

Roadworks are essential to a safe and efficient road network, yet somewhat paradoxically the necessary work is often associated with increased risk to motorists and workers, as well as with traffic flow disruptions. A major source of increased crash risk at roadwork sites (work zones) is poor speed limit compliance. Speeding in work zones is examined in existing literature to the extent that major issues are known and some effective countermeasures are identified. However, as speeding remains a major problem in work zones, influences on driver behaviour arguably need to be better understood to achieve greater compliance and thus realise further gains in road safety. Current research on safety at Queensland roadwork sites has examined the views of workers, measured work zone speed profiles, and conducted an online survey of drivers (N=410). This paper focuses on survey participants’ ratings of 12 specific work zone items (including traffic control measures) in terms of their influence on speed choice. Repeated measures ANOVA revealed statistically significant differences (p<0.001) in the ratings of these items, with the most influential including visible presence of workers, visible police presence, and speed feedback displays. Those rated least influential included ’roadwork speed limits are enforced’ and ‘reduce speed’ signs and increased fines for speeding in work zones. The paper considers the alignment of these findings with those from other sources, including worker interviews and the literature, to provide a consolidated assessment of the influence of work zone items on driver speeds.